Resources

In a quality-control molecular diagnostic assay, an automated Sanger sequencing reaction of a viral PCR product is evaluated by four-color capillary electrophoresis. The optical detector records fluorescence emission peaks as fragments migrate past the laser window. The following terminal fluorescent fragments are registered in chronological order of detector transit times: peak 1 at 12.4 min12.4\text{ min} (blue, ddCTP), peak 2 at 12.9 min12.9\text{ min} (green, ddATP), peak 3 at 13.5 min13.5\text{ min} (black, ddGTP), peak 4 at 14.1 min14.1\text{ min} (red, ddTTP), peak 5 at 14.7 min14.7\text{ min} (green, ddATP), and peak 6 at 15.3 min15.3\text{ min} (blue, ddCTP). (a) Write the 5′-to-3′5'\text{-to-}3' nucleotide sequence of the newly synthesized chain. (b) Deduce the corresponding 5′-to-3′5'\text{-to-}3' nucleotide sequence of the original template strand. (c) Explain why the smallest fluorescent fragments pass the capillary detector window first.

Answer and steps

Final answer

(a) Newly synthesized sequence (5′→3′5' \rightarrow 3'): 5′-CAGTAC-3’5'\text{-CAGTAC-3'}; (b) Original template sequence (5′→3′5' \rightarrow 3'): 5′-GTACTG-3’5'\text{-GTACTG-3'}; (c) Capillary electrophoresis separates fragments by size through a polymer matrix where smaller DNA fragments experience less frictional drag, exhibiting higher electrophoretic mobility and eluting earliest.

Steps

01

Determine the sequence of the newly synthesized strand

In automated Sanger sequencing, chain elongation starts from a primer and proceeds in the 5′→3′5' \rightarrow 3' direction. When a fluorescently labeled dideoxynucleotide (ddNTP\text{ddNTP}) is incorporated, synthesis terminates because ddNTPs\text{ddNTPs} lack the 3′-OH3'\text{-OH} group required to form the next phosphodiester bond.

Because capillary electrophoresis separates DNA fragments by length, the shortest fragments elute first and pass the detector earliest. The shortest fragment represents termination at the position closest to the 5′5' primer, meaning the chronological order of the peaks directly reads the newly synthesized strand from 5′5' to 3′3':

  1. Peak 1 (12.4 min12.4\text{ min}): ddCTP→C\text{ddCTP} \rightarrow \text{C}
  2. Peak 2 (12.9 min12.9\text{ min}): ddATP→A\text{ddATP} \rightarrow \text{A}
  3. Peak 3 (13.5 min13.5\text{ min}): ddGTP→G\text{ddGTP} \rightarrow \text{G}
  4. Peak 4 (14.1 min14.1\text{ min}): ddTTP→T\text{ddTTP} \rightarrow \text{T}
  5. Peak 5 (14.7 min14.7\text{ min}): ddATP→A\text{ddATP} \rightarrow \text{A}
  6. Peak 6 (15.3 min15.3\text{ min}): ddCTP→C\text{ddCTP} \rightarrow \text{C}

Thus, the newly synthesized sequence is: 5′-CAGTAC-3’5'\text{-CAGTAC-3'}


02

Deduce the sequence of the original template strand

DNA strands are antiparallel and follow Watson-Crick base-pairing rules (A\text{A} pairs with T\text{T}, and C\text{C} pairs with G\text{G}):

  • Newly synthesized strand: 5′-C - A - G - T - A - C-3’5'\text{-C - A - G - T - A - C-3'}
  • Complementary template strand (3′→5′3' \rightarrow 5'): 3′-G - T - C - A - T - G-5’3'\text{-G - T - C - A - T - G-5'}

A common pitfall is forgetting to reverse the direction when asked for the standard 5′→3′5' \rightarrow 3' orientation. Writing this complementary sequence from 5′5' to 3′3' gives: 5′-GTACTG-3’5'\text{-GTACTG-3'}


03

Explain the separation mechanism in capillary electrophoresis

DNA fragments have a uniform negative charge-to-mass ratio due to their phosphate-sugar backbone, which means their electrophoretic mobility in free solution would otherwise be nearly identical.

However, capillary electrophoresis uses a sieving polymer matrix:

  1. Frictional drag: Longer DNA strands experience greater physical hindrance and friction as they weave through the pores of the polymer network.
  2. Mobility: Shorter DNA fragments navigate through the mesh with less resistance (lower frictional drag), resulting in higher electrophoretic mobility toward the positive electrode (anode).
  3. Detection: Because they migrate faster through the capillary, the smallest fragments reach and pass the laser detection window first.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets that nucleic acid strands are antiparallel, writing the complement directly 5' to 3' without reversing it.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Peak order: C, A, G, T, A, C ⟹\Longrightarrow Synthesized strand: 5′-CAGTAC-3′5'\text{-CAGTAC-}3'

  2. Step 2

    Complement of C is G, A is T, G is C, T is A, A is T, C is G ⟹\Longrightarrow Template strand: 5′-GTCATG-3′5'\text{-GTCATG-}3'

    Correct

    3′-GTCATG-5′3'\text{-GTCATG-}5' (which is 5′-GTACTG-3′5'\text{-GTACTG-}3')

    You correctly identified each complementary base, but DNA strands are antiparallel. Complementing 5′-CAGTAC-3′5'\text{-CAGTAC-}3' yields 3′-GTCATG-5′3'\text{-GTCATG-}5', which reads 5′-GTACTG-3′5'\text{-GTACTG-}3' when oriented 5′→3′5' \rightarrow 3'.

  3. Step 3

    All DNA fragments have equal charge density. Smaller fragments move faster through the polymer matrix because of less frictional resistance.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly translated the fluorophore elution order into the 5′→3′5' \rightarrow 3' synthesized strand sequence.

You accurately identified the complementary Watson-Crick base pair for every position.

You clearly explained how frictional resistance in a sieving polymer matrix separates DNA fragments by size.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Antiparallel strand reversal omitted

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You paired complementary bases directly from left to right without accounting for the antiparallel orientation of double-stranded DNA, labeling the 3′3' end as 5′5' and vice versa.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check strand polarity
  • Complementary DNA strands run antiparallel: the 5′5' end of one strand always pairs with the 3′3' end of the opposite strand.

  • Always write the complementary strand labeled 3′→5′3' \rightarrow 5' first, then invert the entire sequence from back to front to report it in standard 5′→3′5' \rightarrow 3' orientation.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Start with the newly synthesized strand: 5′-CAGTAC-3′5'\text{-CAGTAC-}3'.

  2. Form the antiparallel complementary template strand: 3′-GTCATG-5′3'\text{-GTCATG-}5'.

  3. Reverse the sequence order to write it in the requested 5′→3′5' \rightarrow 3' direction: 5′-GTACTG-3′5'\text{-GTACTG-}3'.

Final answer

(a) 5′-CAGTAC-3′5'\text{-CAGTAC-}3'; (b) 5′-GTACTG-3′5'\text{-GTACTG-}3'; (c) Capillary electrophoresis separates DNA by size; smaller fragments experience less frictional resistance through the sieving polymer matrix, yielding higher mobility and earlier detection.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting complementary DNA sequences by first writing the 3′→5′3' \rightarrow 5' antiparallel strand and then explicitly reversing the letters.

  • Review molecular biology convention: whenever a single DNA sequence is written without explicit end labels, 5′→3′5' \rightarrow 3' polarity is assumed.

OverviewACEpath Teacher's Diagnosis

02 The student misinterprets electrophoretic mobility, assuming the longest fragments migrate fastest and elute first, reversing the synthesized sequence.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Longest fragments migrate first, so peak 1 is the 3′3' end and peak 6 is the 5′5' end.   ⟹  \implies Synthesized strand: 5′-CATGAC-3’5'\text{-CATGAC-3'}

    Correct

    5′-CAGTAC-3’5'\text{-CAGTAC-3'}

    In capillary electrophoresis through a sieving matrix, smaller DNA fragments experience less frictional resistance and migrate faster, so they pass the detector first. Peak 1 (the earliest peak) corresponds to the shortest extension product directly adjacent to the primer at the 5′5' end, meaning the peaks read directly 5′→3′5' \rightarrow 3' in chronological order: C→A→G→T→A→C\text{C} \rightarrow \text{A} \rightarrow \text{G} \rightarrow \text{T} \rightarrow \text{A} \rightarrow \text{C}.

  2. Step 2

    Complementary strand in 3′3' to 5′5' is 3′-GTACTG-5’  ⟹  3'\text{-GTACTG-5'} \implies Template strand: 5′-GTCATG-3’5'\text{-GTCATG-3'}

    Correct

    5′-GTACTG-3’5'\text{-GTACTG-3'}

    You correctly took the Watson-Crick complement and reversed the strand direction to write it 5′→3′5' \rightarrow 3', but because your initial synthesized sequence was reversed, this result is affected by that earlier error.

  3. Step 3

    Larger fragments carry more negative charge so they are pulled stronger toward the positive electrode.

    Correct

    Capillary electrophoresis separates fragments by size using a sieving polymer matrix. DNA has a nearly uniform charge-to-mass ratio, so electrophoretic mobility is determined by frictional drag: smaller fragments encounter less resistance in the polymer pores, migrate with higher mobility, and elute first.

    While larger fragments do have more total negative charges, their increased mass and drag cancel out any charge advantage, creating a constant charge-to-mass ratio. Migration differences depend entirely on physical sieving through the polymer matrix, where smaller fragments travel faster because they encounter less frictional drag.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly paired complementary bases using Watson-Crick rules.

You accurately converted a 3′→5′3' \rightarrow 5' strand into standard 5′→3′5' \rightarrow 3' orientation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Electrophoretic mobility inversion and charge-to-mass ratio misconception

Assuming the earliest detected peak corresponds to the largest DNA fragment.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated electrophoretic force as solely proportional to total net charge while overlooking that DNA has a constant charge-to-mass ratio in solution, which makes size-dependent sieving (frictional drag) the sole determinant of migration speed in gel or capillary electrophoresis.

REASONING PATH
Your ACEpath teacher’s suggested approach
DNA Charge-to-Mass Ratio
  • Every nucleotide adds both mass and one negative phosphate group, keeping the charge-to-mass ratio constant for all DNA fragments.

  • Do not assume longer DNA moves faster due to higher net charge; in free solution, all DNA fragments would migrate at nearly identical velocities.

Sieving Matrix Separation
  • Electrophoresis matrices (gel or liquid polymer) act as molecular sieves where shorter fragments experience less frictional drag.

  • Always recall that smaller fragments migrate fastest and elute first; in Sanger sequencing traces, chronological peak order reads directly from 5′5' to 3′3'.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify that peak 1 (12.4 min12.4\text{ min}, ddCTP) is the shortest fragment and therefore corresponds to the first incorporated base at the 5′5' end of the synthesized chain.

  2. Read peaks 1 through 6 in chronological order to find the synthesized strand: 5′-CAGTAC-3’5'\text{-CAGTAC-3'}.

  3. Determine the antiparallel complementary sequence for the template strand: 3′-GTCATG-5’3'\text{-GTCATG-5'}.

  4. Reverse the complementary strand into the requested 5′→3′5' \rightarrow 3' orientation: $5'-GTACTG-3’\text{-GTACTG-3'}.

Final answer

(a) 5′-CAGTAC-3’5'\text{-CAGTAC-3'}; (b) 5′-GTACTG-3’5'\text{-GTACTG-3'}; (c) DNA has a uniform charge-to-mass ratio, so separation is governed by sieving in the polymer matrix where smaller fragments experience less frictional drag and migrate fastest.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how capillary polymer matrices separate biomolecules based on hydrodynamic volume and frictional drag.

  • Practice reading Sanger electropherogram traces from left to right as 5′→3′5' \rightarrow 3' nascent strands.

OverviewACEpath Teacher's Diagnosis

03 The student confuses the synthesized strand with the template strand, reporting the synthesized sequence as the template sequence.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Peak sequence from detector: C, A, G, T, A, C  ⟹  Synthesized strand: 5′-CAGTAC-3′\text{Peak sequence from detector: C, A, G, T, A, C} \implies \text{Synthesized strand: } 5'\text{-CAGTAC-}3'

  2. Step 2

    The sequence read directly corresponds to the viral template DNA.  ⟹  Template strand: 5′-CAGTAC-3′\text{The sequence read directly corresponds to the viral template DNA.} \implies \text{Template strand: } 5'\text{-CAGTAC-}3'

    Correct

    5′-GTACTG-3′5'\text{-GTACTG-}3'

    The chromatogram reads the newly synthesized strand, which is complementary and antiparallel to the template strand. To find the template strand, you must determine the complementary sequence (3′-GTCATG-5′3'\text{-GTCATG-}5') and write it in the requested 5′→3′5' \rightarrow 3' orientation (5′-GTACTG-3′5'\text{-GTACTG-}3').

  3. Step 3

    DNA has a uniform charge-to-mass ratio. Smaller molecules navigate the sieving gel pores with less obstruction and migrate faster.\text{DNA has a uniform charge-to-mass ratio. Smaller molecules navigate the sieving gel pores with less obstruction and migrate faster.}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly translated the chronological fluorescence peaks into the 5′→3′5' \rightarrow 3' synthesized strand.

You provided a sound physical explanation of sieving and electrophoretic mobility in capillary gel electrophoresis.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Template vs. Synthesized Strand Confusion

You treated the chromatogram readout as the viral template sequence itself rather than as the newly synthesized strand.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

In Sanger sequencing, DNA polymerase incorporates fluorescent ddNTPs into a growing nascent strand using the viral DNA as a template. Consequently, the electropherogram directly yields the nascent strand (5′→3′5' \rightarrow 3'). Obtaining the original template requires two steps: base pairing (extA↔T ext{A} \leftrightarrow \text{T}, extC↔G ext{C} \leftrightarrow \text{G}) and inverting the orientation to report it from 5′5' to 3′3'.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Strand Identity
  • Automated sequencer peaks correspond to terminated extension products, which represent the newly synthesized strand, not the template.

  • Label the direct chromatogram reading as the synthesized strand (5′→3′5' \rightarrow 3').

Apply Antiparallel Complementarity
  • Template and nascent strands are antiparallel: 5′-…-3′5'\text{-}\dots\text{-}3' pairs with 3′-…-5′3'\text{-}\dots\text{-}5'.

  • Complement each base (extC→G ext{C}\rightarrow\text{G}, extA→T ext{A}\rightarrow\text{T}, extG→C ext{G}\rightarrow\text{C}, extT→A ext{T}\rightarrow\text{A}) and reverse the string to report from 5′5' to 3′3'.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the synthesized strand as 5′-C-A-G-T-A-C-3′5'\text{-C-A-G-T-A-C-}3'.

  2. Form the complementary antiparallel template strand: 3′-G-T-C-A-T-G-5′3'\text{-G-T-C-A-T-G-}5'.

  3. Reverse the sequence to express it in the standard 5′→3′5' \rightarrow 3' direction: 5′-G-T-A-C-T-G-3′5'\text{-G-T-A-C-T-G-}3'.

Final answer

(a) 5′-CAGTAC-3′5'\text{-CAGTAC-}3'; (b) 5′-GTACTG-3′5'\text{-GTACTG-}3'; (c) Smaller DNA fragments experience less frictional drag through the polymer matrix, resulting in higher electrophoretic mobility and earlier detection.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting between electropherogram readouts, nascent strands, and template strands.

  • Always write out the intermediate 3′→5′3' \rightarrow 5' complementary strand first before reversing it to avoid orientation errors.

Lock it in

Similar question

01

A Sanger sequencing reaction yields the following fluorophore peak order from earliest to latest transit time: T, G, G, C, A. Write: (a) the newly synthesized strand in 5′→3′5' \rightarrow 3' orientation, and (b) the original template strand in 5′→3′5' \rightarrow 3' orientation.

Answer

(a) Synthesized strand: 5′-TGGCA-3′5'\text{-TGGCA-}3'. (b) Antiparallel complement is 3′-ACCGT-5′3'\text{-ACCGT-}5'; reversing gives template strand: 5′-TGCCA-3′5'\text{-TGCCA-}3'.

02

A sequencing electropherogram shows fragments eluting in the sequence C-T-A-G-A. An analyst writes the template sequence as 5′-GATCT-3′5'\text{-GATCT-}3'. Identify the error in the analyst's deduction and provide the correct 5′→3′5' \rightarrow 3' template sequence.

Answer

The analyst paired bases directly without reversing for antiparallel polarity. The synthesized strand is 5′-CTAGA-3′5'\text{-CTAGA-}3', giving an antiparallel template of 3′-GATCT-5′3'\text{-GATCT-}5'. Written 5′→3′5' \rightarrow 3', the correct template sequence is 5′-TCTAG-3′5'\text{-TCTAG-}3'.

03

An automated sequencer detects the following sequence of terminal ddNTP peaks: 1 (A), 2 (C), 3 (C), 4 (T), 5 (G). A mutation in the template changes the fourth synthesized base from T to G. Deduce the original template sequence and the mutated template sequence, both written in 5′→3′5' \rightarrow 3' orientation.

Answer

Original synthesized strand: 5′-ACCTG-3′  ⟹  5'\text{-ACCTG-}3' \implies original template (3′-TGGAC-5′3'\text{-TGGAC-}5'): 5′-CAGGT-3′5'\text{-CAGGT-}3'. Mutated synthesized strand: 5′-ACCGG-3′  ⟹  5'\text{-ACCGG-}3' \implies mutated template (3′-TGGCC-5′3'\text{-TGGCC-}5'): 5′-CCGGT-3′5'\text{-CCGGT-}3'.

Loading workspace…