Resources

In a controlled mesocosm experiment investigating zooplankton dynamics, an ecologist establishes six 500 L500\text{ L} tanks with increasing initial densities of Ceriodaphnia dubia: N0∈{50,100,200,400,800,1,600}N_0 \in \{50, 100, 200, 400, 800, 1{,}600\} individuals. Across all tanks, water temperature is held at 20.0∘C20.0^\circ\text{C} and food (Chlorella algae) is provided at a fixed daily ration of 5.0 mg5.0\text{ mg} per tank. On Day 7, census data reveal per capita female fecundity (mean number of viable eggs per female, FF) across the six tanks to be 8.0,7.6,5.8,3.1,1.4,8.0, 7.6, 5.8, 3.1, 1.4, and 0.6 eggs/female0.6\text{ eggs/female}, respectively. On Day 8, an unintended incubator mechanical malfunction causes temperature to spike to 34.0∘C34.0^\circ\text{C} for 3 hours3\text{ hours}, resulting in the death of 12,23,49,98,196,12, 23, 49, 98, 196, and 390390 individuals across the respective tanks. (a) Construct a linear or qualitative assessment of per capita fecundity as a function of density to identify whether fecundity is density-dependent or density-independent. (b) Calculate the per capita mortality rate caused by the heat spike across all six tanks, state whether thermal stress acts as a density-dependent or density-independent factor, and explain why identifying the regulatory mechanism requires evaluating per capita rates rather than raw counts.

Answer and steps

Final answer

(a) Per capita fecundity declines monotonically from 8.0 eggs/female8.0\text{ eggs/female} at N=50N = 50 down to 0.6 eggs/female0.6\text{ eggs/female} at N=1,600N = 1{,}600 due to exploitative resource competition for the fixed algal food supply (5.0 mg5.0\text{ mg}); therefore, fecundity is a strongly density-dependent regulatory factor. (b) Per capita heat-spike mortality rates: 1250=24.0%\frac{12}{50} = 24.0\%, 23100=23.0%\frac{23}{100} = 23.0\%, 49200=24.5%\frac{49}{200} = 24.5\%, 98400=24.5%\frac{98}{400} = 24.5\%, 196800=24.5%\frac{196}{800} = 24.5\%, and 3901,600=24.38%\frac{390}{1{,}600} = 24.38\%. The mean mortality is ≈24.1%±0.6%\approx 24.1\% \pm 0.6\%, which remains invariant across a 32-fold increase in population density; therefore, thermal stress acts as a density-independent factor. Per capita rates normalize for population size, revealing that the abiotic disturbance eliminates a fixed fraction regardless of density, whereas raw death counts (1212 vs. 390390) merely reflect cohort magnitude.

Steps

Part (a): Assessing Per Capita Fecundity vs. Population Density

A demographic rate (such as birth rate, death rate, or fecundity) is defined as density-dependent if its per capita value systematically changes as population density changes. If the per capita rate remains constant regardless of population density, it is density-independent.

  1. Examine the observed fecundity across densities:

    • At N=50N = 50: F=8.0 eggs/femaleF = 8.0\text{ eggs/female}
    • At N=100N = 100: F=7.6 eggs/femaleF = 7.6\text{ eggs/female}
    • At N=200N = 200: F=5.8 eggs/femaleF = 5.8\text{ eggs/female}
    • At N=400N = 400: F=3.1 eggs/femaleF = 3.1\text{ eggs/female}
    • At N=800N = 800: F=1.4 eggs/femaleF = 1.4\text{ eggs/female}
    • At N=1,600N = 1{,}600: F=0.6 eggs/femaleF = 0.6\text{ eggs/female}
  2. Qualitative and Mechanistic Interpretation: As the population size increases by a factor of 3232 (from 5050 to 1,6001{,}600 individuals in a constant 500 L500\text{ L} volume), per capita fecundity drops monotonically from 8.08.0 down to 0.6 eggs/female0.6\text{ eggs/female}. Because each tank receives the same fixed daily ration of food (5.0 mg5.0\text{ mg} of Chlorella algae), each individual receives a progressively smaller share of energy as density increases, leaving less energy available for reproduction (exploitative competition).
  3. Conclusion: Because per capita fecundity is an inverse function of population density, fecundity in this system is a density-dependent regulatory factor.

Part (b): Evaluating Thermal Stress and Mortality Rates

  1. Calculate per capita mortality (mm) for each tank: The per capita mortality rate is given by the ratio of deaths (DD) to initial population size (NN): m=DN×100%m = \frac{D}{N} \times 100\%

    • Tank 1 (N=50N = 50): m1=1250=0.240=24.0%m_1 = \frac{12}{50} = 0.240 = 24.0\%
    • Tank 2 (N=100N = 100): m2=23100=0.230=23.0%m_2 = \frac{23}{100} = 0.230 = 23.0\%
    • Tank 3 (N=200N = 200): m3=49200=0.245=24.5%m_3 = \frac{49}{200} = 0.245 = 24.5\%
    • Tank 4 (N=400N = 400): m4=98400=0.245=24.5%m_4 = \frac{98}{400} = 0.245 = 24.5\%
    • Tank 5 (N=800N = 800): m5=196800=0.245=24.5%m_5 = \frac{196}{800} = 0.245 = 24.5\%
    • Tank 6 (N=1,600N = 1{,}600): m6=3901,600≈0.2438=24.38%m_6 = \frac{390}{1{,}600} \approx 0.2438 = 24.38\%
  2. Determine factor classification: The per capita mortality rate remains essentially constant across all treatments at approximately 24.1%±0.6%24.1\% \pm 0.6\%, showing no upward or downward trend across a 3232-fold increase in density. Therefore, thermal stress acts as a density-independent factor.
  3. Importance of Per Capita Rates vs. Raw Counts:

    • Pitfall: Looking solely at absolute deaths (1212 in Tank 1 vs. 390390 in Tank 6) might give the false impression that denser tanks experienced disproportionately higher mortality.
    • Resolution: Absolute numbers of deaths scale directly with initial cohort size (D≈0.24⋅ND \approx 0.24 \cdot N). Population regulation depends on the proportion (or per capita probability) of individuals dying. By calculating per capita mortality, we normalize for sample size, revealing whether the biological impact per organism changes with crowding. Since the proportion killed is invariant to density, the physical disturbance acts uniformly across all populations.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses raw mortality counts with per capita rates, falsely concluding that thermal stress is density-dependent because more individuals died in higher-density tanks.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    As density increases from 5050 to 1,6001{,}600, fecundity drops from 8.08.0 to 0.6 eggs/female0.6\text{ eggs/female}. Because per capita fecundity decreases as density increases, fecundity is density-dependent.

  2. Step 2

    Deaths per tank: 12,23,49,98,196,39012, 23, 49, 98, 196, 390. ⟹\Longrightarrow Mortality increases as density increases from 1212 deaths at N=50N=50 to 390390 deaths at N=1,600N=1{,}600. ⟹\Longrightarrow Thermal stress is a density-dependent factor. Evaluating raw counts shows that higher density causes significantly more individuals to die from heat stress.

    Correct

    Per capita mortality rates: 1250=24.0%\frac{12}{50} = 24.0\%, 23100=23.0%\frac{23}{100} = 23.0\%, 49200=24.5%\frac{49}{200} = 24.5\%, 98400=24.5%\frac{98}{400} = 24.5\%, 196800=24.5%\frac{196}{800} = 24.5\%, and 3901,600≈24.4%\frac{390}{1{,}600} \approx 24.4\%. Because the proportion of individuals dying is constant at ≈24.1%\approx 24.1\% across all densities, thermal stress is density-independent. Per capita rates normalize for population size, showing whether an individual's probability of dying changes with crowding.

    You looked at absolute death counts instead of calculating per capita mortality rates (deaths divided by total individuals). Because a fixed percentage of a larger population naturally yields a larger count of deaths, raw counts can create the illusion of density dependence.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately tracked the trend in per capita fecundity across densities.

You correctly defined the qualitative condition for density dependence in part (a).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing raw counts with per capita rates

You evaluated raw death counts (1212 to 390390) instead of computing per capita mortality rates (D/ND/N).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating absolute death numbers with per capita demographic rates: density dependence is defined by how per capita probabilities (percentages) change with density, not by raw totals.

REASONING PATH
Your ACEpath teacher’s suggested approach
Density Dependence Definition
  • A demographic factor is density-dependent if and only if its per capita rate (fraction or percentage) changes with population density.

  • Always divide total events by the total population size (NN) before evaluating density dependence.

Abiotic Disturbance Invariance
  • Abiotic disturbances typically affect a constant fraction of individuals regardless of group size, meaning raw death numbers scale proportionally with NN.

  • Check whether DeathsN\frac{\text{Deaths}}{N} remains constant across treatments.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Divide the number of deaths in each tank by its initial population size: 1250=24.0%\frac{12}{50} = 24.0\%, 23100=23.0%\frac{23}{100} = 23.0\%, 49200=24.5%\frac{49}{200} = 24.5\%, 98400=24.5%\frac{98}{400} = 24.5\%, 196800=24.5%\frac{196}{800} = 24.5\%, and 3901,600≈24.4%\frac{390}{1{,}600} \approx 24.4\%.

  2. Observe that the per capita mortality rate remains essentially constant at approximately 24.1%24.1\% across all six densities.

  3. Conclude that because the per capita risk of death does not change with density, thermal stress is a density-independent factor.

Final answer

(a) Fecundity is density-dependent. (b) Per capita mortality rates are ≈24.1%\approx 24.1\% across all tanks; thermal stress is density-independent because per capita mortality does not change with density, whereas raw death counts merely scale with initial population size.

NEXT STEPS
Final Takeaways from Your Teacher
  • Always calculate rates as number of eventstotal population\frac{\text{number of events}}{\text{total population}} before classifying an ecological factor as density-dependent or density-independent.

  • Practice identifying whether experimental data give raw totals or per capita rates to avoid drawing false conclusions from scaling effects.

OverviewACEpath Teacher's Diagnosis

02 The student misinterprets a declining per capita rate as density-independent under the belief that density dependence only applies when a rate increases with density.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Per capita fecundity decreases from 8.08.0 to 0.60.6 as population density increases.

  2. Step 2

    Fecundity is density-independent because it does not increase with higher density.

    Correct

    Because per capita fecundity changes systematically with density (specifically, declining due to intraspecific resource competition), fecundity is a density-dependent regulatory factor.

    A vital rate is density-dependent if its per capita value varies with population density in any direction. Fecundity decreasing as density increases represents classic negative density dependence, not density independence.

  3. Step 3

    Mortality rates: 12/50=0.2412/50 = 0.24, 23/100=0.2323/100 = 0.23, 49/200=0.24549/200 = 0.245, 98/400=0.24598/400 = 0.245, 196/800=0.245196/800 = 0.245, 390/1600=0.244390/1600 = 0.244.   ⟹  \implies The per capita mortality rate is roughly constant at ∼24%\sim 24\% across all densities.

  4. Step 4

    Thermal stress acts as a density-independent factor.   ⟹  \implies Per capita rates are required because total deaths increase with population size regardless of whether the hazard rate depends on density.

WHAT YOU DID WELL
Compliments from Your Teacher

You observed the negative relationship between per capita fecundity and population density.

You accurately calculated the per capita mortality rates across all six mesocosm treatments.

You correctly classified thermal stress as density-independent based on an invariant mortality rate.

You clearly explained why evaluating per capita rates rather than raw counts is essential to distinguish regulatory mechanisms.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Misconception of Density Dependence Directionality

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that 'density dependence' requires a rate to increase as density increases. In ecology, density dependence refers to any per capita demographic rate (birth, death, or fecundity) that is a non-constant function of density. When per capita fecundity decreases as density increases (negative density dependence), it serves as a primary regulatory feedback mechanism through resource competition.

REASONING PATH
Your ACEpath teacher’s suggested approach
Defining Density Dependence
  • A demographic factor is density-dependent if the per capita rate changes (increases OR decreases) as population density changes. It is density-independent only if the per capita rate remains constant regardless of density.

  • Check whether the per capita rate is a function of density (df/dN≠0df/dN \neq 0). If it varies systematically, classify it as density-dependent regardless of whether the slope is positive or negative.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall that density dependence means the per capita rate changes with population density (df/dN≠0df/dN \neq 0).

  2. Observe that per capita fecundity drops from 8.08.0 down to 0.6 eggs/female0.6\text{ eggs/female} as density increases from 5050 to 1,6001{,}600 individuals.

  3. Conclude that because the per capita rate decreases systematically with density (negative density dependence via resource competition), fecundity is a density-dependent regulatory factor.

Final answer

Per capita fecundity is density-dependent because it systematically declines as density increases.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between positive density dependence (e.g., Allee effects) and negative density dependence (e.g., intraspecific competition reducing birth rate or increasing death rate).

  • Practice sketching per capita birth rate and death rate curves against density to visualize how their intersection determines carrying capacity KK.

OverviewACEpath Teacher's Diagnosis

03 The student calculates surviving proportions rather than mortality rates due to misinterpreting the mortality calculation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Per capita fecundity declines monotonically from 8.08.0 to 0.60.6 as density rises.   ⟹  \implies Fecundity is density-dependent.

  2. Step 2

    Survivors: 50−12=3850 - 12 = 38, 100−23=77100 - 23 = 77, 200−49=151200 - 49 = 151, 400−98=302400 - 98 = 302, 800−196=604800 - 196 = 604, 1600−390=12101600 - 390 = 1210.   ⟹  \implies Rates: 38/50=0.7638/50 = 0.76, 77/100=0.7777/100 = 0.77, 151/200=0.755151/200 = 0.755, 302/400=0.755302/400 = 0.755, 604/800=0.755604/800 = 0.755, 1210/1600=0.7561210/1600 = 0.756.   ⟹  \implies Per capita mortality rate is constant at ∼76%\sim 76\% across all tanks.

    Correct

    Per capita mortality rate m=DeathsNm = \frac{\text{Deaths}}{N}: 1250=24.0%\frac{12}{50} = 24.0\%, 23100=23.0%\frac{23}{100} = 23.0\%, 49200=24.5%\frac{49}{200} = 24.5\%, 98400=24.5%\frac{98}{400} = 24.5\%, 196800=24.5%\frac{196}{800} = 24.5\%, and 3901600≈24.38%\frac{390}{1600} \approx 24.38\%, yielding an average mortality rate of ≈24.1%\approx 24.1\%.

    You calculated the per capita survival rate (survivors divided by initial population, ≈76%\approx 76\%) instead of the per capita mortality rate (deaths divided by initial population, ≈24%\approx 24\%).

  3. Step 3

    Thermal stress acts as a density-independent factor.   ⟹  \implies Evaluating per capita rates is necessary because absolute numbers scale with total population size.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that a declining per capita rate indicates density dependence.

You recognized that an invariant proportional rate across densities signals density independence.

You clearly articulated why raw counts must be normalized to per capita rates when assessing population regulation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Survival vs. Mortality Rate Inversion

You subtracted deaths to find survivors and divided those by the initial population, calculating survival proportion rather than mortality rate.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the complement demographic metric (survival proportion, N−DN\frac{N - D}{N}) with the requested metric (mortality rate, DN\frac{D}{N}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Define the Target Rate Explicitly
  • Mortality rate is the proportion of the population that dies: m=DeathsInitial Populationm = \frac{\text{Deaths}}{\text{Initial Population}}. Survival rate is s=SurvivorsInitial Population=1−ms = \frac{\text{Survivors}}{\text{Initial Population}} = 1 - m.

  • Before computing, write down the formula for the specific demographic parameter requested (deaths vs. survivors).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate per capita mortality mi=DiNim_i = \frac{D_i}{N_i} for each tank:

  2. Tank 1: m1=1250=0.240=24.0%m_1 = \frac{12}{50} = 0.240 = 24.0\%

  3. Tank 2: m2=23100=0.230=23.0%m_2 = \frac{23}{100} = 0.230 = 23.0\%

  4. Tank 3: m3=49200=0.245=24.5%m_3 = \frac{49}{200} = 0.245 = 24.5\%

  5. Tank 4: m4=98400=0.245=24.5%m_4 = \frac{98}{400} = 0.245 = 24.5\%

  6. Tank 5: m5=196800=0.245=24.5%m_5 = \frac{196}{800} = 0.245 = 24.5\%

  7. Tank 6: m6=3901600≈0.2438=24.38%m_6 = \frac{390}{1600} \approx 0.2438 = 24.38\%

  8. Note that the mean mortality rate is ≈24.1%\approx 24.1\% (which is 100%−75.9%100\% - 75.9\%).

Final answer

Per capita mortality rates across the six tanks are 24.0%24.0\%, 23.0%23.0\%, 24.5%24.5\%, 24.5%24.5\%, 24.5%24.5\%, and 24.38%24.38\% (averaging ≈24.1%\approx 24.1\%).

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check demographic definitions to ensure you divide the number of deaths (not survivors) when asked for mortality rates.

  • Remember that survival rate and mortality rate always sum to 11 (or 100%100\%): if your calculated rate is ≈76%\approx 76\%, check whether that represents those who lived or those who died.

Lock it in

Similar question

01

A fungal pathogen infects three populations of pine seedlings: at density N=100N = 100, 1515 seedlings die; at N=500N = 500, 175175 seedlings die; at N=2,000N = 2{,}000, 1,2001{,}200 seedlings die. Calculate per capita mortality for each population and classify the pathogen as density-dependent or density-independent.

Answer

Per capita mortality rates: 15100=15%\frac{15}{100} = 15\%, 175500=35%\frac{175}{500} = 35\%, and 1,2002,000=60%\frac{1{,}200}{2{,}000} = 60\%. Because the per capita mortality rate increases as density increases, the fungal pathogen is a density-dependent factor.

02

In a river survey, a chemical spill kills 8080 fish in a reach with 400400 individuals and 240240 fish in an adjacent reach with 1,2001{,}200 individuals. An angler claims the chemical spill is density-dependent because three times as many fish died in the second reach. Evaluate the angler's claim with calculations.

Answer

The angler's claim is incorrect. In reach 1, per capita mortality is 80400=20%\frac{80}{400} = 20\%. In reach 2, it is 2401,200=20%\frac{240}{1{,}200} = 20\%. Because the per capita death rate is identical (20%20\%) in both reaches, the chemical spill acts as a density-independent factor; the higher raw death count merely reflects the larger initial population.

03

A population ecologist models per capita mortality mm as a function of density NN using the equation m(N)=0.10+0.0005Nm(N) = 0.10 + 0.0005N. If population A has N=200N = 200 and population B has N=800N = 800, calculate (a) the per capita mortality rate for each population and (b) the total number of deaths in each population. State which calculation directly demonstrates density dependence.

Answer

(a) Population A: m(200)=0.10+0.0005(200)=0.20m(200) = 0.10 + 0.0005(200) = 0.20 (20%20\%). Population B: m(800)=0.10+0.0005(800)=0.50m(800) = 0.10 + 0.0005(800) = 0.50 (50%50\%). (b) Total deaths: Population A has 200×0.20=40200 \times 0.20 = 40 deaths; Population B has 800×0.50=400800 \times 0.50 = 400 deaths. Demonstration: Part (a) directly demonstrates density dependence because the per capita probability of mortality increases from 20%20\% to 50%50\% as density increases from 200200 to 800800.

Loading workspace…