Resources

In a desert halophyte, soil water potential drops to the extreme limit of Ψsoil=−4.50 MPa\Psi_{\text{soil}} = -4.50\text{ MPa}. A mature leaf cell has an osmotic solute potential of Ψs=−5.20 MPa\Psi_s = -5.20\text{ MPa}. At the limit of incipient plasmolysis where protoplast volume shrinks such that turgor pressure reaches Ψp=0.00 MPa\Psi_p = 0.00\text{ MPa}, calculate the cell's water potential (Ψcell\Psi_{\text{cell}}) and determine the direction of water flow. Furthermore, calculate the minimum positive turgor pressure (Ψp,min\Psi_{p,\text{min}}) the cell must establish via osmotic adjustment (accumulating additional osmoprotectants to drop Ψs\Psi_s to −6.00 MPa-6.00\text{ MPa}) in order to maintain a dynamic equilibrium with the soil where net water flux across root and vascular tissues ceases.

Answer and steps

Final answer

At incipient plasmolysis, Ψcell=Ψs+Ψp=−5.20 MPa+0.00 MPa=−5.20 MPa\Psi_{\text{cell}} = \Psi_s + \Psi_p = -5.20\text{ MPa} + 0.00\text{ MPa} = -5.20\text{ MPa}; water moves into the cell from the soil (Ψsoil>Ψcell\Psi_{\text{soil}} > \Psi_{\text{cell}}). At dynamic equilibrium (Ψcell=Ψsoil=−4.50 MPa\Psi_{\text{cell}} = \Psi_{\text{soil}} = -4.50\text{ MPa}) with adjusted Ψs=−6.00 MPa\Psi_s = -6.00\text{ MPa}, the required turgor pressure is Ψp,min=Ψsoil−Ψs=−4.50 MPa−(−6.00 MPa)=+1.50 MPa\Psi_{p,\text{min}} = \Psi_{\text{soil}} - \Psi_s = -4.50\text{ MPa} - (-6.00\text{ MPa}) = +1.50\text{ MPa}.

Steps

01

Water Potential Equation in Plant Cells

The total water potential of a plant cell (Ψcell\Psi_{\text{cell}}) is determined by the balance between its osmotic (solute) potential (Ψs\Psi_s) and its pressure potential or turgor pressure (Ψp\Psi_p):

Ψcell=Ψs+Ψp\Psi_{\text{cell}} = \Psi_s + \Psi_p

  • Solute potential (Ψs\Psi_s): Always negative (or zero for pure water), representing the reduction in water potential due to dissolved solutes.
  • Pressure potential (Ψp\Psi_p): Hydrostatic pressure exerted by the rigid cell wall against the protoplast, which is positive in a turgid cell and zero at incipient plasmolysis.

02

State at Incipient Plasmolysis

At incipient plasmolysis, the plasma membrane just touches the cell wall without exerting outward force, meaning turgor pressure drops to zero (Ψp=0.00 MPa\Psi_p = 0.00\text{ MPa}):

Ψcell=Ψs+Ψp=−5.20 MPa+0.00 MPa=−5.20 MPa\Psi_{\text{cell}} = \Psi_s + \Psi_p = -5.20\text{ MPa} + 0.00\text{ MPa} = -5.20\text{ MPa}


03

Direction of Water Movement

Water moves spontaneously down a water potential gradient from a region of higher (less negative) water potential to one of lower (more negative) water potential:

  • Soil water potential: Ψsoil=−4.50 MPa\Psi_{\text{soil}} = -4.50\text{ MPa}
  • Cell water potential: Ψcell=−5.20 MPa\Psi_{\text{cell}} = -5.20\text{ MPa}

Because −4.50 MPa>−5.20 MPa-4.50\text{ MPa} > -5.20\text{ MPa} (Ψsoil>Ψcell\Psi_{\text{soil}} > \Psi_{\text{cell}}), water potential is higher in the soil than in the leaf cell. Consequently, water flows along the plant vascular continuum from the soil into the cell.

Common Pitfall: A common mistake is comparing the absolute values (∣−5.20∣>∣−4.50∣|-5.20| > |-4.50|) and concluding water leaves the cell. Because water potentials are negative, −4.50-4.50 is algebraically greater than −5.20-5.20.


04

Minimum Turgor Pressure at Dynamic Equilibrium

When net water flux ceases between the soil and the plant vascular system, the leaf cell reaches dynamic water potential equilibrium with the soil:

Ψcell=Ψsoil=−4.50 MPa\Psi_{\text{cell}} = \Psi_{\text{soil}} = -4.50\text{ MPa}

Following osmotic adjustment, the cell accumulates solutes such that its solute potential drops to Ψs=−6.00 MPa\Psi_s = -6.00\text{ MPa}. Rearranging the water potential equation to solve for the required turgor pressure (Ψp,min\Psi_{p,\text{min}}):

Ψcell=Ψs+Ψp,min\Psi_{\text{cell}} = \Psi_s + \Psi_{p,\text{min}}

Ψp,min=Ψcell−Ψs=−4.50 MPa−(−6.00 MPa)=+1.50 MPa\Psi_{p,\text{min}} = \Psi_{\text{cell}} - \Psi_s = -4.50\text{ MPa} - (-6.00\text{ MPa}) = +1.50\text{ MPa}

The cell establishes a positive turgor pressure of +1.50 MPa+1.50\text{ MPa}, maintaining cell rigidity and structural integrity despite the extremely dry, saline soil environment.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misinterprets negative numbers by treating -5.20 MPa as greater than -4.50 MPa, concluding water flows out of the cell.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ψcell=Ψs+Ψp  ⟹  Ψcell=−5.20+0.00=−5.20 MPa\Psi_{\text{cell}} = \Psi_s + \Psi_p \implies \Psi_{\text{cell}} = -5.20 + 0.00 = -5.20\text{ MPa}

  2. Step 2

    Since \text{Since } -5.20 > -4.50, \Psi_{cell\text{cell}} > \Psi_{soil\text{soil}}   ⟹  \implies Water flows from the cell into the soil\text{Water flows from the cell into the soil}

    Correct

    Since \text{Since } -4.50 > -5.20, \Psi_{soil\text{soil}} > \Psi_{cell\text{cell}}   ⟹  \implies Water flows from the soil into the cell\text{Water flows from the soil into the cell}

    On a negative number line, −4.50-4.50 is greater (less negative) than −5.20-5.20. Because water moves spontaneously from higher (less negative) to lower (more negative) water potential, water moves into the cell from the soil.

  3. Step 3

    At equilibrium, \text{At equilibrium, } \Psi_{cell\text{cell}} = \Psi_{soil\text{soil}} = -4.50 MPa\text{ MPa}   ⟹  \implies \Psi_p = \Psi_{cell\text{cell}} - \Psi_s   ⟹  \implies \Psi_{p,min\text{min}} = -4.50 - (-6.00) = +1.50 MPa\text{ MPa}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the equation Ψ=Ψs+Ψp\Psi = \Psi_s + \Psi_p with Ψp=0.00 MPa\Psi_p = 0.00\text{ MPa} to find cell water potential at incipient plasmolysis.

You correctly set up dynamic equilibrium with the soil to solve for the adjusted turgor pressure of +1.50 MPa+1.50\text{ MPa}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Negative magnitude comparison error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You compared the absolute magnitudes of the water potential values (5.20>4.505.20 > 4.50) rather than their signed values (−5.20<−4.50-5.20 < -4.50), leading to the reversed conclusion that cell water potential was higher than soil water potential.

REASONING PATH
Your ACEpath teacher’s suggested approach
Ordering Negative Water Potentials
  • For two negative values aa and bb, if ∣a∣>∣b∣|a| > |b|, then a<ba < b. A less negative water potential is mathematically greater.

  • Always place values on a standard number line where values closer to zero are greater. Here, −4.50 MPa-4.50\text{ MPa} is to the right of −5.20 MPa-5.20\text{ MPa}, so Ψsoil>Ψcell\Psi_{\text{soil}} > \Psi_{\text{cell}}.

Direction of Osmotic Water Movement
  • Water always flows spontaneously down a water potential gradient: from higher (less negative) Ψ\Psi to lower (more negative) Ψ\Psi.

  • Identify the higher potential first (−4.50 MPa-4.50\text{ MPa}) and point the net flow arrow toward the lower potential (−5.20 MPa-5.20\text{ MPa}).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compare the signed values: −4.50 MPa>−5.20 MPa-4.50\text{ MPa} > -5.20\text{ MPa}, meaning Ψsoil>Ψcell\Psi_{\text{soil}} > \Psi_{\text{cell}}.

  2. Water moves spontaneously from higher water potential (soil) to lower water potential (cell).

  3. Conclude that net water flow is into the cell from the soil.

Final answer

Ψcell=−5.20 MPa\Psi_{\text{cell}} = -5.20\text{ MPa}; water flows from the soil into the cell; Ψp,min=+1.50 MPa\Psi_{p,\text{min}} = +1.50\text{ MPa}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice comparing pairs of negative decimal numbers on a vertical or horizontal number line before assigning flow direction.

  • Verify flow direction physically: halophytes accumulate high solutes to make their internal water potential lower than the soil so they can extract water.

OverviewACEpath Teacher's Diagnosis

02 The student subtracts solute potential instead of adding it in the fundamental equation, arriving at an erroneous negative turgor pressure.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ψcell=Ψs+Ψp  ⟹  Ψcell=−5.20+0.00=−5.20 MPa\Psi_{\text{cell}} = \Psi_s + \Psi_p \implies \Psi_{\text{cell}} = -5.20 + 0.00 = -5.20\text{ MPa}

  2. Step 2

    Since −4.50 MPa>−5.20 MPa, water flows from soil into the cell\text{Since } -4.50\text{ MPa} > -5.20\text{ MPa}\text{, water flows from soil into the cell}

  3. Step 3

    At equilibrium, Ψcell=−4.50 MPa  ⟹  Ψcell=Ψp−Ψs  ⟹  Ψp,min=Ψcell+Ψs=−4.50+(−6.00)=−10.50 MPa\text{At equilibrium, } \Psi_{\text{cell}} = -4.50\text{ MPa} \implies \Psi_{\text{cell}} = \Psi_p - \Psi_s \implies \Psi_{p,\text{min}} = \Psi_{\text{cell}} + \Psi_s = -4.50 + (-6.00) = -10.50\text{ MPa}

    Correct

    Ψcell=Ψs+Ψp  ⟹  Ψp,min=Ψcell−Ψs=−4.50 MPa−(−6.00 MPa)=+1.50 MPa\Psi_{\text{cell}} = \Psi_s + \Psi_p \implies \Psi_{p,\text{min}} = \Psi_{\text{cell}} - \Psi_s = -4.50\text{ MPa} - (-6.00\text{ MPa}) = +1.50\text{ MPa}

    You altered the fundamental formula to Ψcell=Ψp−Ψs\Psi_{\text{cell}} = \Psi_p - \Psi_s instead of Ψcell=Ψs+Ψp\Psi_{\text{cell}} = \Psi_s + \Psi_p. Rearranging the correct formula yields Ψp=Ψcell−Ψs\Psi_p = \Psi_{\text{cell}} - \Psi_s, giving a positive turgor pressure of +1.50 MPa+1.50\text{ MPa}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled and applied the water potential formula at incipient plasmolysis.

You compared negative values correctly to identify the direction of water potential flow.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula Rearrangement Error

You accidentally subtracted solute potential instead of adding it when setting up the equilibrium relationship.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated solute potential as a subtracted term in the fundamental water potential formula (Ψcell=Ψp−Ψs\Psi_{\text{cell}} = \Psi_p - \Psi_s), forgetting that Ψs\Psi_s is already an intrinsically negative quantity added to pressure potential (Ψcell=Ψs+Ψp\Psi_{\text{cell}} = \Psi_s + \Psi_p).

REASONING PATH
Your ACEpath teacher’s suggested approach
Fundamental Water Potential Equation
  • Total water potential is always the algebraic sum of its components: Ψ=Ψs+Ψp\Psi = \Psi_s + \Psi_p.

  • Never introduce a minus sign into the core formula; simply substitute the negative numerical value for Ψs\Psi_s.

Physical Reality of Turgor Pressure
  • Living plant cells in equilibrium with non-dessicating environments maintain positive turgor pressure (Ψp>0\Psi_p > 0).

  • Check that your calculated Ψp\Psi_p is positive when osmotic adjustment allows a cell to maintain turgor against soil water stress.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the leaf cell water potential equal to soil water potential at dynamic equilibrium: Ψcell=Ψsoil=−4.50 MPa\Psi_{\text{cell}} = \Psi_{\text{soil}} = -4.50\text{ MPa}.

  2. Start from the correct relation Ψcell=Ψs+Ψp,min\Psi_{\text{cell}} = \Psi_s + \Psi_{p,\text{min}} and isolate Ψp,min\Psi_{p,\text{min}} by subtracting Ψs\Psi_s: Ψp,min=Ψcell−Ψs\Psi_{p,\text{min}} = \Psi_{\text{cell}} - \Psi_s.

  3. Substitute the adjusted values: Ψp,min=−4.50 MPa−(−6.00 MPa)=−4.50 MPa+6.00 MPa=+1.50 MPa\Psi_{p,\text{min}} = -4.50\text{ MPa} - (-6.00\text{ MPa}) = -4.50\text{ MPa} + 6.00\text{ MPa} = +1.50\text{ MPa}.

Final answer

Ψp,min=+1.50 MPa\Psi_{p,\text{min}} = +1.50\text{ MPa}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the signs of components in the plant water potential equation, remembering that solute potential is inherently negative while turgor pressure is typically positive.

  • Practice rearranging Ψ=Ψs+Ψp\Psi = \Psi_s + \Psi_p for both Ψs\Psi_s and Ψp\Psi_p before plugging in negative values.

OverviewACEpath Teacher's Diagnosis

03 The student mishandles the signs when solving Ψ_p = Ψ_cell - Ψ_s by computing -4.50 - 6.00 instead of subtracting the negative value.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ψcell=Ψs+Ψp  ⟹  Ψcell=−5.20+0.00=−5.20 MPa\Psi_{\text{cell}} = \Psi_s + \Psi_p \implies \Psi_{\text{cell}} = -5.20 + 0.00 = -5.20\text{ MPa}

  2. Step 2

    Water moves from soil to cell because −4.50 MPa>−5.20 MPa-4.50\text{ MPa} > -5.20\text{ MPa}

  3. Step 3

    At equilibrium, Ψcell=Ψsoil=−4.50 MPa  ⟹  Ψp,min=Ψcell−Ψs\Psi_{\text{cell}} = \Psi_{\text{soil}} = -4.50\text{ MPa} \implies \Psi_{p,\text{min}} = \Psi_{\text{cell}} - \Psi_s

  4. Step 4

    Ψp,min=−4.50−6.00=−10.50 MPa\Psi_{p,\text{min}} = -4.50 - 6.00 = -10.50\text{ MPa}

    Correct

    Ψp,min=−4.50 MPa−(−6.00 MPa)=+1.50 MPa\Psi_{p,\text{min}} = -4.50\text{ MPa} - (-6.00\text{ MPa}) = +1.50\text{ MPa}

    Because solute potential is already negative (Ψs=−6.00 MPa\Psi_s = -6.00\text{ MPa}), subtracting Ψs\Psi_s means subtracting a negative number: −4.50−(−6.00)=−4.50+6.00=+1.50 MPa-4.50 - (-6.00) = -4.50 + 6.00 = +1.50\text{ MPa}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the water potential equation Ψ=Ψs+Ψp\Psi = \Psi_s + \Psi_p.

You correctly identified that water moves from higher (less negative) to lower (more negative) water potential.

You set up the correct equilibrium relationship where cell water potential equals soil water potential.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error when subtracting negative value

You treated −6.00 MPa-6.00\text{ MPa} as positive 6.00 MPa6.00\text{ MPa} during subtraction, calculating −4.50−6.00-4.50 - 6.00 instead of −4.50−(−6.00)-4.50 - (-6.00).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the double negative when substituting a negative solute potential into the rearranged formula Ψp=Ψ−Ψs\Psi_p = \Psi - \Psi_s.

REASONING PATH
Your ACEpath teacher’s suggested approach
Double Negative Substitution
  • Subtracting a negative quantity is algebraically equivalent to adding its magnitude: a−(−b)=a+ba - (-b) = a + b.

  • Always place parentheses around negative quantities when substituting into formulas, writing −4.50−(−6.00)-4.50 - (-6.00).

Biological Sanity Check for Turgor Pressure
  • In living plant cells, turgor pressure Ψp\Psi_p is positive (or zero at plasmolysis); it cannot be negative in an intact, living cell.

  • Check whether your calculated Ψp\Psi_p is positive when the question asks for a minimum positive turgor pressure.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute Ψcell=−4.50 MPa\Psi_{\text{cell}} = -4.50\text{ MPa} and Ψs=−6.00 MPa\Psi_s = -6.00\text{ MPa}: Ψp,min=−4.50−(−6.00)\Psi_{p,\text{min}} = -4.50 - (-6.00)

  2. Simplify the double negative: Ψp,min=−4.50+6.00\Psi_{p,\text{min}} = -4.50 + 6.00

  3. Calculate the sum: Ψp,min=+1.50 MPa\Psi_{p,\text{min}} = +1.50\text{ MPa}

Final answer

Ψp,min=+1.50 MPa\Psi_{p,\text{min}} = +1.50\text{ MPa}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice substituting negative potentials inside parentheses: Ψp=Ψ−(Ψs)\Psi_p = \Psi - (\Psi_s).

  • Perform a sanity check on Ψp\Psi_p: a living turgid cell must have Ψp>0\Psi_p > 0.

Lock it in

Similar question

01

A root hair cell has Ψs=−1.80 MPa\Psi_s = -1.80\text{ MPa} and Ψp=+0.60 MPa\Psi_p = +0.60\text{ MPa}. Surrounding soil water has Ψsoil=−0.70 MPa\Psi_{\text{soil}} = -0.70\text{ MPa}. Calculate Ψcell\Psi_{\text{cell}} and determine the direction of net water movement.

Answer

Ψcell=Ψs+Ψp=−1.80+0.60=−1.20 MPa\Psi_{\text{cell}} = \Psi_s + \Psi_p = -1.80 + 0.60 = -1.20\text{ MPa}. Because −0.70 MPa>−1.20 MPa-0.70\text{ MPa} > -1.20\text{ MPa} (Ψsoil>Ψcell\Psi_{\text{soil}} > \Psi_{\text{cell}}), net water flow is from the soil into the root hair cell.

02

A mangrove leaf cell is placed in an environment where xylem sap water potential is Ψxylem=−3.20 MPa\Psi_{\text{xylem}} = -3.20\text{ MPa}. If the leaf cell adjusts its solute potential to Ψs=−4.50 MPa\Psi_s = -4.50\text{ MPa}, what turgor pressure Ψp\Psi_p must it maintain so that no net water movement occurs between the xylem and the cell?

Answer

At equilibrium, Ψcell=Ψxylem=−3.20 MPa\Psi_{\text{cell}} = \Psi_{\text{xylem}} = -3.20\text{ MPa}. Using Ψcell=Ψs+Ψp\Psi_{\text{cell}} = \Psi_s + \Psi_p, we get Ψp=Ψcell−Ψs=−3.20−(−4.50)=+1.30 MPa\Psi_p = \Psi_{\text{cell}} - \Psi_s = -3.20 - (-4.50) = +1.30\text{ MPa}.

03

Under drought conditions, a plant cell with Ψs=−2.80 MPa\Psi_s = -2.80\text{ MPa} has flaccid walls (Ψp=0.00 MPa\Psi_p = 0.00\text{ MPa}). The dry soil has Ψsoil=−3.60 MPa\Psi_{\text{soil}} = -3.60\text{ MPa}. (a) In which direction does water move initially? (b) What must the cell adjust its solute potential to if it needs to draw water until it reaches dynamic equilibrium with a turgor pressure of +0.40 MPa+0.40\text{ MPa}?

Answer

(a) Initial Ψcell=−2.80 MPa\Psi_{\text{cell}} = -2.80\text{ MPa}. Since −2.80>−3.60-2.80 > -3.60, Ψcell>Ψsoil\Psi_{\text{cell}} > \Psi_{\text{soil}}, so water moves out of the cell into the soil. (b) For dynamic equilibrium at Ψcell=Ψsoil=−3.60 MPa\Psi_{\text{cell}} = \Psi_{\text{soil}} = -3.60\text{ MPa} with Ψp=+0.40 MPa\Psi_p = +0.40\text{ MPa}, Ψs=Ψcell−Ψp=−3.60−0.40=−4.00 MPa\Psi_s = \Psi_{\text{cell}} - \Psi_p = -3.60 - 0.40 = -4.00\text{ MPa}.

Loading workspace…