Resources

In yeast cultures grown in an environment where the dissolved oxygen concentration drops below the critical Pasteur threshold, aerobic cellular respiration is inhibited and cells switch to ethanol fermentation. Suppose a yeast culture metabolizes glucose at an initial rate of 4.20×10−4 mol⋅L−1⋅min−14.20\times 10^{-4}\text{ mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1} under fully aerobic conditions, generating 30.0 moles of ATP30.0\text{ moles of ATP} per mole of glucose. Calculate the required minimum glucose consumption rate (in mol⋅L−1⋅min−1\text{mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}) when the culture shifts entirely to anaerobic ethanol fermentation (2 moles of ATP2\text{ moles of ATP} per mole of glucose) in order to maintain an identical rate of cellular ATP generation.

Answer and steps

Final answer

Required glucose consumption rate = 6.30×10−3 mol⋅L−1⋅min−16.30\times 10^{-3}\text{ mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}.

Steps

01

Determine the rate of ATP generation under aerobic conditions

Method: Equating the Rates of ATP Production

The rate of cellular ATP\text{ATP} synthesis (RATPR_{\text{ATP}}) is the product of the glucose consumption rate and the yield of ATP\text{ATP} per mole of glucose consumed:

RATP=raerobic⋅YaerobicR_{\text{ATP}} = r_{\text{aerobic}} \cdot Y_{\text{aerobic}}

Substitute the given values: RATP=(4.20×10−4 mol glucose⋅L−1⋅min−1)⋅(30.0 mol ATP⋅mol glucose−1)R_{\text{ATP}} = (4.20 \times 10^{-4}\text{ mol glucose}\cdot\text{L}^{-1}\cdot\text{min}^{-1}) \cdot (30.0\text{ mol ATP}\cdot\text{mol glucose}^{-1}) RATP=1.26×10−2 mol ATP⋅L−1⋅min−1R_{\text{ATP}} = 1.26 \times 10^{-2}\text{ mol ATP}\cdot\text{L}^{-1}\cdot\text{min}^{-1}


02

Calculate the required glucose consumption rate for fermentation

To maintain the exact same rate of cellular energy (ATP\text{ATP}) generation under anaerobic conditions, the total ATP\text{ATP} production rate must remain 1.26×10−2 mol⋅L−1⋅min−11.26 \times 10^{-2}\text{ mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}:

RATP=ranaerobic⋅YanaerobicR_{\text{ATP}} = r_{\text{anaerobic}} \cdot Y_{\text{anaerobic}}

Rearranging to solve for the anaerobic glucose consumption rate (ranaerobicr_{\text{anaerobic}}):

ranaerobic=RATPYanaerobicr_{\text{anaerobic}} = \frac{R_{\text{ATP}}}{Y_{\text{anaerobic}}}

Substitute the values: ranaerobic=1.26×10−2 mol ATP⋅L−1⋅min−12 mol ATP⋅mol glucose−1=6.30×10−3 mol glucose⋅L−1⋅min−1r_{\text{anaerobic}} = \frac{1.26 \times 10^{-2}\text{ mol ATP}\cdot\text{L}^{-1}\cdot\text{min}^{-1}}{2\text{ mol ATP}\cdot\text{mol glucose}^{-1}} = 6.30 \times 10^{-3}\text{ mol glucose}\cdot\text{L}^{-1}\cdot\text{min}^{-1}


Alternative Quick Ratio Method

Since the required ATP\text{ATP} output is identical in both conditions: ranaerobic⋅Yanaerobic=raerobic⋅Yaerobicr_{\text{anaerobic}} \cdot Y_{\text{anaerobic}} = r_{\text{aerobic}} \cdot Y_{\text{aerobic}}

ranaerobic=raerobic⋅(YaerobicYanaerobic)r_{\text{anaerobic}} = r_{\text{aerobic}} \cdot \left(\frac{Y_{\text{aerobic}}}{Y_{\text{anaerobic}}}\right)

The ratio of ATP\text{ATP} yields is: 30.02=15\frac{30.0}{2} = 15

Therefore, the yeast must consume glucose 1515 times faster to compensate for the lower efficiency of fermentation (known as the Pasteur effect): ranaerobic=15⋅(4.20×10−4 mol⋅L−1⋅min−1)=6.30×10−3 mol⋅L−1⋅min−1r_{\text{anaerobic}} = 15 \cdot (4.20 \times 10^{-4}\text{ mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}) = 6.30 \times 10^{-3}\text{ mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}

Common Pitfall: Do not confuse the yield per glucose with the overall metabolic rate. A lower ATP\text{ATP} yield per mole requires an increased glucose uptake rate, not a decreased one, to sustain cellular functions.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 A student inverts the ratio of ATP yields, dividing by the aerobic yield and multiplying by the anaerobic yield instead of compensating for the lower ATP yield per glucose.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Aerobic glucose rate=4.20×10−4 mol⋅L−1⋅min−1\text{Aerobic glucose rate} = 4.20\times 10^{-4}\text{ mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}

  2. Step 2

    Anaerobic rate=4.20×10−4×(2/30.0)\text{Anaerobic rate} = 4.20\times 10^{-4}\times (2 / 30.0)

    Correct

    Anaerobic rate=4.20×10−4×(30.02)\text{Anaerobic rate} = 4.20\times 10^{-4}\times \left(\frac{30.0}{2}\right)

    You inverted the ratio of ATP yields. Because anaerobic fermentation yields far less ATP per glucose (2 mol ATP2\text{ mol ATP} vs. 30.0 mol ATP30.0\text{ mol ATP}), yeast cells must consume glucose 1515 times faster (30.02=15\frac{30.0}{2} = 15) to sustain the same ATP generation rate.

  3. Step 3

    Anaerobic rate=2.80×10−5 mol⋅L−1⋅min−1\text{Anaerobic rate} = 2.80\times 10^{-5}\text{ mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}

    Correct

    Anaerobic rate=6.30×10−3 mol⋅L−1⋅min−1\text{Anaerobic rate} = 6.30\times 10^{-3}\text{ mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}

    Your arithmetic follows from the inverted ratio in Step 2, but yields a value that is 225225 times smaller than the required rate.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the given aerobic glucose consumption rate.

You recognized that the solution requires scaling the glucose consumption rate by the ratio of the ATP yields.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
inverted_proportionality_ratio

You multiplied by 230.0\frac{2}{30.0} instead of dividing by 22 and multiplying by 30.030.0.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated glucose consumption rate as directly proportional to ATP yield rather than inversely proportional; when ATP yield per substrate molecule drops, substrate consumption must increase to keep total ATP output constant (ranaerobic⋅Yanaerobic=raerobic⋅Yaerobicr_{\text{anaerobic}} \cdot Y_{\text{anaerobic}} = r_{\text{aerobic}} \cdot Y_{\text{aerobic}}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Equate Total Production Rates
  • Rate of ATP production=(glucose rate)×(ATP yield per glucose)\text{Rate of ATP production} = (\text{glucose rate}) \times (\text{ATP yield per glucose})

  • Set raerobic⋅Yaerobic=ranaerobic⋅Yanaerobicr_{\text{aerobic}} \cdot Y_{\text{aerobic}} = r_{\text{anaerobic}} \cdot Y_{\text{anaerobic}} before solving algebraically for the unknown rate.

Sanity Check Biological Compensation (Pasteur Effect)
  • A less efficient pathway requires more fuel, not less, to deliver equal cellular energy.

  • Check whether your resulting anaerobic consumption rate is greater than the aerobic rate.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Equate the two ATP generation rates: ranaerobic⋅(2 mol ATP/mol glucose)=(4.20×10−4 mol⋅L−1⋅min−1)⋅(30.0 mol ATP/mol glucose)r_{\text{anaerobic}} \cdot (2\text{ mol ATP/mol glucose}) = (4.20\times 10^{-4}\text{ mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}) \cdot (30.0\text{ mol ATP/mol glucose}).

  2. Isolate the anaerobic glucose consumption rate: ranaerobic=4.20×10−4⋅(30.02)=4.20×10−4⋅15r_{\text{anaerobic}} = 4.20\times 10^{-4} \cdot \left(\frac{30.0}{2}\right) = 4.20\times 10^{-4} \cdot 15.

  3. Multiply out the numerical terms: ranaerobic=6.30×10−3 mol⋅L−1⋅min−1r_{\text{anaerobic}} = 6.30\times 10^{-3}\text{ mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}.

Final answer

6.30×10−3 mol⋅L−1⋅min−16.30\times 10^{-3}\text{ mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the governing balance equation with full units (r1Y1=r2Y2r_1 Y_1 = r_2 Y_2) before substituting numbers.

  • Verify that shifting to fermentation yields a higher substrate uptake rate (the Pasteur effect).

  • Practice setting up inverse proportionality problems involving metabolic flux and enzyme yields.

OverviewACEpath Teacher's Diagnosis

02 A student directly multiplies the initial rate by the fermentation yield of 2 moles of ATP per glucose rather than dividing by it to determine the glucose consumption needed.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ATP rate=4.20×10−4×30.0=1.26×10−2 mol ATP⋅L−1⋅min−1\text{ATP rate} = 4.20 \times 10^{-4} \times 30.0 = 1.26 \times 10^{-2}\text{ mol ATP}\cdot\text{L}^{-1}\cdot\text{min}^{-1}

  2. Step 2

    Anaerobic glucose rate=1.26×10−2×2  ⟹  Anaerobic glucose rate=2.52×10−2 mol⋅L−1⋅min−1\text{Anaerobic glucose rate} = 1.26 \times 10^{-2} \times 2 \implies \text{Anaerobic glucose rate} = 2.52 \times 10^{-2}\text{ mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}

    Correct

    ranaerobic=RATPYanaerobic=1.26×10−2 mol ATP⋅L−1⋅min−12 mol ATP⋅mol glucose−1=6.30×10−3 mol⋅L−1⋅min−1r_{\text{anaerobic}} = \frac{R_{\text{ATP}}}{Y_{\text{anaerobic}}} = \frac{1.26 \times 10^{-2}\text{ mol ATP}\cdot\text{L}^{-1}\cdot\text{min}^{-1}}{2\text{ mol ATP}\cdot\text{mol glucose}^{-1}} = 6.30 \times 10^{-3}\text{ mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}

    You multiplied the required ATP rate by 22 instead of dividing by the fermentation yield of 2 mol ATP/mol glucose2\text{ mol ATP}/\text{mol glucose}. Because fermentation generates far less ATP per glucose, you need to divide the total ATP required by the yield per glucose to find the substrate consumption rate.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the total ATP production rate must remain constant between aerobic and anaerobic conditions.

You accurately calculated the aerobic ATP production rate as 1.26×10−2 mol ATP⋅L−1⋅min−11.26 \times 10^{-2}\text{ mol ATP}\cdot\text{L}^{-1}\cdot\text{min}^{-1}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Operation in Rate-Yield Relationship

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the anaerobic yield as a multiplier rather than a conversion factor in the denominator (r=RATPYr = \frac{R_{\text{ATP}}}{Y}), likely missing the dimensional cancellation that mol ATPL⋅min÷mol ATPmol glucose=mol glucoseL⋅min\frac{\text{mol ATP}}{\text{L}\cdot\text{min}} \div \frac{\text{mol ATP}}{\text{mol glucose}} = \frac{\text{mol glucose}}{\text{L}\cdot\text{min}}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Analysis Check
  • Substrate Rate (mol glucose/time)=ATP Demand Rate (mol ATP/time)Yield (mol ATP/mol glucose)\text{Substrate Rate } (\text{mol glucose}/\text{time}) = \frac{\text{ATP Demand Rate } (\text{mol ATP}/\text{time})}{\text{Yield } (\text{mol ATP}/\text{mol glucose})}

  • Always write out units and ensure that units of ATP cancel out, leaving units of glucose in the numerator.

Biological Intuition (Pasteur Effect)
  • When shifting from high-yield respiration (30 ATP30\text{ ATP}) to low-yield fermentation (2 ATP2\text{ ATP}), glucose consumption must increase by the yield ratio: 302=15×\frac{30}{2} = 15\times.

  • Verify that your anaerobic consumption rate equals 15×(4.20×10−4)=6.30×10−315 \times (4.20 \times 10^{-4}) = 6.30 \times 10^{-3}, which is substantially higher than the aerobic rate.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the relationship relating ATP production rate to anaerobic glucose uptake: RATP=ranaerobic×YanaerobicR_{\text{ATP}} = r_{\text{anaerobic}} \times Y_{\text{anaerobic}}.

  2. Rearrange to solve for ranaerobicr_{\text{anaerobic}}: ranaerobic=RATPYanaerobic=1.26×10−2 mol ATP⋅L−1⋅min−12 mol ATP⋅mol glucose−1r_{\text{anaerobic}} = \frac{R_{\text{ATP}}}{Y_{\text{anaerobic}}} = \frac{1.26 \times 10^{-2}\text{ mol ATP}\cdot\text{L}^{-1}\cdot\text{min}^{-1}}{2\text{ mol ATP}\cdot\text{mol glucose}^{-1}}.

  3. Compute the quotient: ranaerobic=6.30×10−3 mol⋅L−1⋅min−1r_{\text{anaerobic}} = 6.30 \times 10^{-3}\text{ mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}.

Final answer

Required glucose consumption rate = 6.30×10−3 mol⋅L−1⋅min−16.30 \times 10^{-3}\text{ mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the Pasteur effect and practice converting between ATP synthesis rates and substrate turnover rates using dimensional analysis.

  • Work through metabolic rate problems by setting up RATP=rsubstrate⋅YR_{\text{ATP}} = r_{\text{substrate}} \cdot Y before rearranging algebraically.

OverviewACEpath Teacher's Diagnosis

03 A student incorrectly assumes anaerobic fermentation consumes glucose at the same rate and merely calculates the resulting lower ATP production rate instead of the required glucose consumption rate.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Anaerobic rate=4.20×10−4×2\text{Anaerobic rate} = 4.20 \times 10^{-4} \times 2

    Correct

    ranaerobic=raerobic×YaerobicYanaerobic=(4.20×10−4)×30.02r_{\text{anaerobic}} = r_{\text{aerobic}} \times \frac{Y_{\text{aerobic}}}{Y_{\text{anaerobic}}} = (4.20 \times 10^{-4}) \times \frac{30.0}{2}

    You multiplied the baseline aerobic glucose uptake rate by 2 mol ATP⋅mol glucose−12\text{ mol ATP}\cdot\text{mol glucose}^{-1}. This calculation finds the reduced rate of ATP production if glucose consumption stayed the same, rather than determining how much glucose must be consumed to maintain the required ATP production rate (RATP=4.20×10−4×30.0=1.26×10−2 mol ATP⋅L−1⋅min−1R_{\text{ATP}} = 4.20 \times 10^{-4} \times 30.0 = 1.26 \times 10^{-2}\text{ mol ATP}\cdot\text{L}^{-1}\cdot\text{min}^{-1}).

  2. Step 2

    Anaerobic rate=8.40×10−4 mol⋅L−1⋅min−1\text{Anaerobic rate} = 8.40 \times 10^{-4}\text{ mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}

    Correct

    ranaerobic=6.30×10−3 mol⋅L−1⋅min−1r_{\text{anaerobic}} = 6.30 \times 10^{-3}\text{ mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}

    Your final numerical answer follows directly from the incorrect formula in Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that ethanol fermentation yields 2 moles of ATP2\text{ moles of ATP} per mole of glucose.

You performed the multiplication arithmetic accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equating ATP Production Rates vs. Applying Fixed Substrate Consumption

You calculated the anaerobic ATP production rate assuming an unchanged glucose uptake rate instead of solving for the increased glucose uptake rate required to maintain ATP output.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the substrate consumption rate as a constant value across metabolic shifts, overlooking that a lower ATP yield per glucose molecule requires the cell to consume glucose at a substantially higher rate (the Pasteur effect) to sustain identical cellular energy output.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define the Constrained Quantity
  • When a problem states that cellular energy generation is maintained, the total ATP production rate (RATPR_{\text{ATP}}) is constant, not the substrate consumption rate.

  • Set RATP, aerobic=RATP, anaerobicR_{\text{ATP, aerobic}} = R_{\text{ATP, anaerobic}}, which means raerobic×Yaerobic=ranaerobic×Yanaerobicr_{\text{aerobic}} \times Y_{\text{aerobic}} = r_{\text{anaerobic}} \times Y_{\text{anaerobic}}.

Check Physiological Logic (Pasteur Effect)
  • Because anaerobic fermentation yields far less ATP per glucose (22 vs. 3030), yeast must consume glucose faster (1515 times faster) to keep ATP production constant.

  • Before finalizing, verify whether your calculated anaerobic rate is higher than the aerobic rate by the ratio of their ATP yields: 30.02=15\frac{30.0}{2} = 15.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Determine the required constant rate of ATP generation: RATP=raerobic×Yaerobic=(4.20×10−4 mol⋅L−1⋅min−1)×(30.0 mol ATP⋅mol−1)=1.26×10−2 mol ATP⋅L−1⋅min−1R_{\text{ATP}} = r_{\text{aerobic}} \times Y_{\text{aerobic}} = (4.20 \times 10^{-4}\text{ mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}) \times (30.0\text{ mol ATP}\cdot\text{mol}^{-1}) = 1.26 \times 10^{-2}\text{ mol ATP}\cdot\text{L}^{-1}\cdot\text{min}^{-1}.

  2. Set the anaerobic ATP synthesis rate equal to this constant output: ranaerobic×Yanaerobic=1.26×10−2 mol ATP⋅L−1⋅min−1r_{\text{anaerobic}} \times Y_{\text{anaerobic}} = 1.26 \times 10^{-2}\text{ mol ATP}\cdot\text{L}^{-1}\cdot\text{min}^{-1}.

  3. Solve for the required glucose consumption rate: ranaerobic=1.26×10−22=6.30×10−3 mol⋅L−1⋅min−1r_{\text{anaerobic}} = \frac{1.26 \times 10^{-2}}{2} = 6.30 \times 10^{-3}\text{ mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}.

Final answer

Required glucose consumption rate = 6.30×10−3 mol⋅L−1⋅min−16.30 \times 10^{-3}\text{ mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write down explicit dimensional units for each quantity (e.g., mol glucose⋅L−1⋅min−1\text{mol glucose}\cdot\text{L}^{-1}\cdot\text{min}^{-1} vs. mol ATP⋅L−1⋅min−1\text{mol ATP}\cdot\text{L}^{-1}\cdot\text{min}^{-1}) to prevent confusing substrate consumption with product yield.

  • Use ratio balance equations: r1⋅Y1=r2⋅Y2r_1 \cdot Y_1 = r_2 \cdot Y_2 whenever a cellular output is held constant across metabolic state changes.

Lock it in

Similar question

01

A muscle cell metabolizes glucose aerobically at a rate of 1.50×10−4 mol⋅L−1⋅min−11.50\times 10^{-4}\text{ mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1} with a yield of 32 mol ATP/mol glucose32\text{ mol ATP/mol glucose}. During intense exercise, the tissue becomes hypoxic and relies entirely on lactic acid fermentation (2 mol ATP/mol glucose2\text{ mol ATP/mol glucose}). Calculate the glucose consumption rate required to maintain the original ATP production rate.

Answer

2.40×10−3 mol⋅L−1⋅min−12.40\times 10^{-3}\text{ mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}. Key steps: Set ranaerobic⋅2=(1.50×10−4)⋅32r_{\text{anaerobic}} \cdot 2 = (1.50\times 10^{-4}) \cdot 32. Solve ranaerobic=1.50×10−4×16=2.40×10−3 mol⋅L−1⋅min−1r_{\text{anaerobic}} = 1.50\times 10^{-4} \times 16 = 2.40\times 10^{-3}\text{ mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}.

02

A bacterial strain consumes glucose anaerobically at 8.0×10−3 mol⋅L−1⋅h−18.0\times 10^{-3}\text{ mol}\cdot\text{L}^{-1}\cdot\text{h}^{-1} producing 2 mol ATP/mol glucose2\text{ mol ATP/mol glucose}. Upon aeration, it switches completely to aerobic respiration producing 28 mol ATP/mol glucose28\text{ mol ATP/mol glucose}. If the cell maintains the exact same total rate of ATP synthesis, what is its new aerobic glucose consumption rate?

Answer

5.71×10−4 mol⋅L−1⋅h−15.71\times 10^{-4}\text{ mol}\cdot\text{L}^{-1}\cdot\text{h}^{-1}. Key steps: Total ATP rate =(8.0×10−3)×2=1.60×10−2 mol ATP⋅L−1⋅h−1= (8.0\times 10^{-3}) \times 2 = 1.60\times 10^{-2}\text{ mol ATP}\cdot\text{L}^{-1}\cdot\text{h}^{-1}. Aerobic glucose rate =1.60×10−228≈5.71×10−4 mol⋅L−1⋅h−1= \frac{1.60\times 10^{-2}}{28} \approx 5.71\times 10^{-4}\text{ mol}\cdot\text{L}^{-1}\cdot\text{h}^{-1}.

03

A chemoheterotrophic microbe can utilize either glucose (aerobic yield =30 mol ATP/mol= 30\text{ mol ATP/mol}, initial uptake rate =2.0×10−4 mol⋅L−1⋅min−1= 2.0\times 10^{-4}\text{ mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}) or glycerol (aerobic yield =18 mol ATP/mol= 18\text{ mol ATP/mol}). If glucose is exhausted and the culture adapts to glycerol while increasing total ATP demand by 20%20\%, what must the glycerol consumption rate be?

Answer

4.0×10−4 mol⋅L−1⋅min−14.0\times 10^{-4}\text{ mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}. Key steps: Initial ATP rate =(2.0×10−4)×30=6.0×10−3 mol ATP⋅L−1⋅min−1= (2.0\times 10^{-4}) \times 30 = 6.0\times 10^{-3}\text{ mol ATP}\cdot\text{L}^{-1}\cdot\text{min}^{-1}. Target ATP rate =1.20×6.0×10−3=7.2×10−3 mol ATP⋅L−1⋅min−1= 1.20 \times 6.0\times 10^{-3} = 7.2\times 10^{-3}\text{ mol ATP}\cdot\text{L}^{-1}\cdot\text{min}^{-1}. Required glycerol rate =7.2×10−318=4.0×10−4 mol⋅L−1⋅min−1= \frac{7.2\times 10^{-3}}{18} = 4.0\times 10^{-4}\text{ mol}\cdot\text{L}^{-1}\cdot\text{min}^{-1}.

Loading workspace…