Resources

To quantify soil decomposer respiration in an experimental forest plot, an automated closed dynamic respiration chamber covering a surface area of A=0.0500 m2A = 0.0500\text{ m}^2 with an internal air volume of V=10.0 LV = 10.0\text{ L} is deployed over the forest floor. Soil microbes decomposing organic matter produce CO2\text{CO}_2, which accumulates in the chamber headspace. At a standard atmospheric pressure of P=1.00 atmP = 1.00\text{ atm} and ambient chamber temperature of T=293 KT = 293\text{ K}, an infrared gas analyzer (IRGA) records an increase in CO2\text{CO}_2 mixing ratio from 412 ppm412\text{ ppm} to 472 ppm472\text{ ppm} over a sampling interval of exactly Δt=180 s\Delta t = 180\text{ s}. Using the ideal gas law (R=0.08206 L⋅atm⋅mol−1⋅K−1R = 0.08206\text{ L}\cdot\text{atm}\cdot\text{mol}^{-1}\cdot\text{K}^{-1} and carbon atomic mass 12.01 g⋅mol−112.01\text{ g}\cdot\text{mol}^{-1}), calculate the soil microbial respiration flux rate in μmol CO2⋅m−2⋅s−1\mu\text{mol CO}_2\cdot\text{m}^{-2}\cdot\text{s}^{-1} and express the rate of carbon release in mg C⋅m−2⋅hr−1\text{mg C}\cdot\text{m}^{-2}\cdot\text{hr}^{-1}.

Answer and steps

Final answer

2.77 μmol CO2⋅m−2⋅s−12.77\ \mu\text{mol CO}_2\cdot\text{m}^{-2}\cdot\text{s}^{-1}, corresponding to 120 mg C⋅m−2⋅hr−1120\text{ mg C}\cdot\text{m}^{-2}\cdot\text{hr}^{-1}

Steps

01

Calculate the Total Moles of Gas in the Chamber

Soil decomposers (bacteria and fungi) break down organic matter through aerobic cellular respiration, releasing carbon dioxide (COX2\ce{CO2}) into the chamber headspace.

Using the ideal gas law: PV=ntotalRT  ⟹  ntotal=PVRTPV = n_{\text{total}}RT \implies n_{\text{total}} = \frac{PV}{RT}

Substitute the given chamber parameters:

  • Pressure: P=1.00 atmP = 1.00\text{ atm}
  • Volume: V=10.0 LV = 10.0\text{ L}
  • Ideal gas constant: R=0.08206 L⋅atm⋅mol−1⋅K−1R = 0.08206\text{ L}\cdot\text{atm}\cdot\text{mol}^{-1}\cdot\text{K}^{-1}
  • Temperature: T=293 KT = 293\text{ K}

ntotal=1.00 atm×10.0 L0.08206 L⋅atm⋅mol−1⋅K−1×293 K≈10.024.0436 mol≈0.4159 moln_{\text{total}} = \frac{1.00\text{ atm} \times 10.0\text{ L}}{0.08206\text{ L}\cdot\text{atm}\cdot\text{mol}^{-1}\cdot\text{K}^{-1} \times 293\text{ K}} \approx \frac{10.0}{24.0436}\text{ mol} \approx 0.4159\text{ mol}


02

Determine the Amount of COX2\ce{CO2} Produced

The change in COX2\ce{CO2} mixing ratio (ΔXCOX2\Delta X_{\ce{CO2}}) during the interval is: ΔXCOX2=472 ppm−412 ppm=60 ppm=60×10−6 mol CO2/mol air\Delta X_{\ce{CO2}} = 472\text{ ppm} - 412\text{ ppm} = 60\text{ ppm} = 60 \times 10^{-6}\text{ mol CO}_2/\text{mol air}

Multiply the change in mixing ratio by the total moles of gas in the chamber to find the moles of accumulated COX2\ce{CO2} (ΔnCOX2\Delta n_{\ce{CO2}}): ΔnCOX2=ntotal×ΔXCOX2=0.4159 mol×60×10−6≈2.495×10−5 mol\Delta n_{\ce{CO2}} = n_{\text{total}} \times \Delta X_{\ce{CO2}} = 0.4159\text{ mol} \times 60 \times 10^{-6} \approx 2.495 \times 10^{-5}\text{ mol}

Converting to micromoles (μmol\mu\text{mol}): ΔnCOX2=2.495×10−5 mol×106 μmol/mol≈24.95 μmol\Delta n_{\ce{CO2}} = 2.495 \times 10^{-5}\text{ mol} \times 10^6\ \mu\text{mol/mol} \approx 24.95\ \mu\text{mol}


03

Compute the COX2\ce{CO2} Respiration Flux Rate

The respiration flux rate (FCOX2F_{\ce{CO2}}) is defined as the amount of COX2\ce{CO2} produced per unit soil surface area per unit time: FCOX2=ΔnCOX2A⋅ΔtF_{\ce{CO2}} = \frac{\Delta n_{\ce{CO2}}}{A \cdot \Delta t}

Given:

  • Surface area: A=0.0500 m2A = 0.0500\text{ m}^2
  • Time interval: Δt=180 s\Delta t = 180\text{ s}

FCOX2=24.95 μmol0.0500 m2×180 s=24.95 μmol9.00 m2⋅s≈2.77 μmol CO2⋅m−2⋅s−1F_{\ce{CO2}} = \frac{24.95\ \mu\text{mol}}{0.0500\text{ m}^2 \times 180\text{ s}} = \frac{24.95\ \mu\text{mol}}{9.00\text{ m}^2\cdot\text{s}} \approx 2.77\ \mu\text{mol CO}_2\cdot\text{m}^{-2}\cdot\text{s}^{-1}


04

Convert the Flux Rate to Carbon Mass Release per Hour

Each mole of COX2\ce{CO2} contains 1 mol1\text{ mol} of carbon (atomic mass =12.01 g⋅mol−1=12.01 μg⋅μmol−1\text{atomic mass } = 12.01\text{ g}\cdot\text{mol}^{-1} = 12.01\ \mu\text{g}\cdot\mu\text{mol}^{-1} or 12.01×10−3 mg⋅μmol−112.01 \times 10^{-3}\text{ mg}\cdot\mu\text{mol}^{-1}).

  1. Convert the rate to milligrams of carbon per second: FC,per sec=2.7727 μmol CO2⋅m−2⋅s−1×12.01×10−3 mg C1 μmol CO2≈0.03330 mg C⋅m−2⋅s−1F_{\ce{C, per sec}} = 2.7727\ \mu\text{mol CO}_2\cdot\text{m}^{-2}\cdot\text{s}^{-1} \times \frac{12.01 \times 10^{-3}\text{ mg C}}{1\ \mu\text{mol CO}_2} \approx 0.03330\text{ mg C}\cdot\text{m}^{-2}\cdot\text{s}^{-1}
  2. Scale the rate from seconds to hours (1 hr=3600 s1\text{ hr} = 3600\text{ s}): FC=0.03330 mg C⋅m−2⋅s−1×3600 s⋅hr−1≈120 mg C⋅m−2⋅hr−1F_{\ce{C}} = 0.03330\text{ mg C}\cdot\text{m}^{-2}\cdot\text{s}^{-1} \times 3600\text{ s}\cdot\text{hr}^{-1} \approx 120\text{ mg C}\cdot\text{m}^{-2}\cdot\text{hr}^{-1}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to divide the CO₂ production by the chamber surface area A, confusing total chamber emission with flux rate per unit area.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    n=P⋅VR⋅T=1.00⋅10.00.08206⋅293=0.4159 moln = \frac{P \cdot V}{R \cdot T} = \frac{1.00 \cdot 10.0}{0.08206 \cdot 293} = 0.4159\text{ mol}

  2. Step 2

    Δn=0.4159⋅60×10−6=2.495×10−5 mol=24.95 μmol\Delta n = 0.4159 \cdot 60 \times 10^{-6} = 2.495 \times 10^{-5}\text{ mol} = 24.95\ \mu\text{mol}

  3. Step 3

    Flux=ΔnΔt=24.95 μmol180 s=0.139 μmol CO2⋅m−2⋅s−1\text{Flux} = \frac{\Delta n}{\Delta t} = \frac{24.95\ \mu\text{mol}}{180\text{ s}} = 0.139\ \mu\text{mol CO}_2\cdot\text{m}^{-2}\cdot\text{s}^{-1}

    Correct

    FCOX2=ΔnA⋅Δt=24.95 μmol0.0500 m2×180 s≈2.77 μmol CO2⋅m−2⋅s−1F_{\ce{CO2}} = \frac{\Delta n}{A \cdot \Delta t} = \frac{24.95\ \mu\text{mol}}{0.0500\text{ m}^2 \times 180\text{ s}} \approx 2.77\ \mu\text{mol CO}_2\cdot\text{m}^{-2}\cdot\text{s}^{-1}

    You computed the chamber's total rate of emission ( rac{\Delta n}{\Delta t}) rather than flux per unit area. Flux is defined as amount per unit area per unit time, so you must divide by the soil surface area A=0.0500 m2A = 0.0500\text{ m}^2 as well.

  4. Step 4

    Carbon rate=0.1386 μmol⋅s−1⋅12.01×10−3 mg/μmol⋅3600 s/hr=5.99 mg C⋅m−2⋅hr−1\text{Carbon rate} = 0.1386\ \mu\text{mol}\cdot\text{s}^{-1} \cdot 12.01 \times 10^{-3}\text{ mg}/\mu\text{mol} \cdot 3600\text{ s}/\text{hr} = 5.99\text{ mg C}\cdot\text{m}^{-2}\cdot\text{hr}^{-1}

    Correct

    FC=2.7727 μmol CO2⋅m−2⋅s−1×(12.01×10−3 mg C/μmol)×3600 s/hr≈120 mg C⋅m−2⋅hr−1F_{\ce{C}} = 2.7727\ \mu\text{mol CO}_2\cdot\text{m}^{-2}\cdot\text{s}^{-1} \times (12.01 \times 10^{-3}\text{ mg C}/\mu\text{mol}) \times 3600\text{ s}/\text{hr} \approx 120\text{ mg C}\cdot\text{m}^{-2}\cdot\text{hr}^{-1}

    Your conversion factors for molar mass of carbon and time (seconds to hours) were set up correctly, but the final numerical value is an underestimate because it carried forward the flux error from Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the ideal gas equation to compute the total moles of headspace air.

You converted parts per million into mole fraction and found the net micromoles of accumulated COX2\ce{CO2}.

You correctly applied the conversion factors for carbon molar mass (12.01 g/mol12.01\text{ g/mol}) and seconds to hours (3600 s/hr3600\text{ s/hr}).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing surface area normalization in flux calculation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated total emission rate (Δn/Δt\Delta n / \Delta t, in μmol⋅s−1\mu\text{mol}\cdot\text{s}^{-1}) with area-normalized flux (F=Δn/(A⋅Δt)F = \Delta n / (A \cdot \Delta t), in μmol⋅m−2⋅s−1\mu\text{mol}\cdot\text{m}^{-2}\cdot\text{s}^{-1}). Notice that you wrote m−2\text{m}^{-2} in your unit label, but the area A=0.0500 m2A = 0.0500\text{ m}^2 was never included in your calculation denominator.

REASONING PATH
Your ACEpath teacher’s suggested approach
Flux Definition Check
  • Flux across a boundary is always an intensive quantity normalized by both contact area and time: Flux=ΔnA⋅Δt\text{Flux} = \frac{\Delta n}{A \cdot \Delta t}.

  • Always verify that your formula's mathematical denominator includes area AA whenever the target units include m−2\text{m}^{-2}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Include the chamber soil surface area A=0.0500 m2A = 0.0500\text{ m}^2 in the flux formula denominator: FCOX2=ΔnA⋅Δt=24.95 μmol0.0500 m2×180 s=24.959.00≈2.7727 μmol⋅m−2⋅s−1F_{\ce{CO2}} = \frac{\Delta n}{A \cdot \Delta t} = \frac{24.95\ \mu\text{mol}}{0.0500\text{ m}^2 \times 180\text{ s}} = \frac{24.95}{9.00} \approx 2.7727\ \mu\text{mol}\cdot\text{m}^{-2}\cdot\text{s}^{-1}.

  2. Multiply the corrected flux rate by carbon's molar mass and scale to hours: FC=2.7727 μmol⋅m−2⋅s−1×12.01×10−3 mg/μmol×3600 s/hr≈120 mg C⋅m−2⋅hr−1F_{\ce{C}} = 2.7727\ \mu\text{mol}\cdot\text{m}^{-2}\cdot\text{s}^{-1} \times 12.01 \times 10^{-3}\text{ mg}/\mu\text{mol} \times 3600\text{ s}/\text{hr} \approx 120\text{ mg C}\cdot\text{m}^{-2}\cdot\text{hr}^{-1}.

Final answer

2.77 μmol CO2⋅m−2⋅s−12.77\ \mu\text{mol CO}_2\cdot\text{m}^{-2}\cdot\text{s}^{-1}, corresponding to 120 mg C⋅m−2⋅hr−1120\text{ mg C}\cdot\text{m}^{-2}\cdot\text{hr}^{-1}

NEXT STEPS
Final Takeaways from Your Teacher
  • Perform dimensional analysis on your algebraic formula before plugging in numbers: confirm that [amount][area][time]\frac{[\text{amount}]}{[\text{area}][\text{time}]} matches the requested target units.

  • Check that all given dimensional parameters from the problem prompt (A=0.0500 m2A = 0.0500\text{ m}^2) are accounted for in the calculation.

OverviewACEpath Teacher's Diagnosis

02 The student uses the molecular mass of CO₂ (44.01 g/mol) instead of the atomic mass of carbon (12.01 g/mol), calculating the mass flux of CO₂ rather than carbon release.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    n=1.00⋅10.00.08206⋅293=0.4159 moln = \frac{1.00 \cdot 10.0}{0.08206 \cdot 293} = 0.4159\text{ mol}

  2. Step 2

    Δn=0.4159⋅(472−412)×10−6=2.495×10−5 mol=24.95 μmol\Delta n = 0.4159 \cdot (472 - 412) \times 10^{-6} = 2.495 \times 10^{-5}\text{ mol} = 24.95\ \mu\text{mol}

  3. Step 3

    Flux=24.95 μmol0.0500 m2⋅180 s=2.77 μmol CO2⋅m−2⋅s−1\text{Flux} = \frac{24.95\ \mu\text{mol}}{0.0500\text{ m}^2 \cdot 180\text{ s}} = 2.77\ \mu\text{mol CO}_2\cdot\text{m}^{-2}\cdot\text{s}^{-1}

  4. Step 4

    Carbon rate=2.7727 μmol⋅m−2⋅s−1⋅44.01×10−3⋅3600 s/hr  ⟹  Carbon rate=439 mg C⋅m−2⋅hr−1\text{Carbon rate} = 2.7727\ \mu\text{mol}\cdot\text{m}^{-2}\cdot\text{s}^{-1} \cdot 44.01 \times 10^{-3} \cdot 3600\text{ s/hr} \implies \text{Carbon rate} = 439\text{ mg C}\cdot\text{m}^{-2}\cdot\text{hr}^{-1}

    Correct

    FC=2.7727 μmol⋅m−2⋅s−1×12.01×10−3 mg C⋅μmol−1×3600 s⋅hr−1≈120 mg C⋅m−2⋅hr−1F_{\ce{C}} = 2.7727\ \mu\text{mol}\cdot\text{m}^{-2}\cdot\text{s}^{-1} \times 12.01 \times 10^{-3}\text{ mg C}\cdot\mu\text{mol}^{-1} \times 3600\text{ s}\cdot\text{hr}^{-1} \approx 120\text{ mg C}\cdot\text{m}^{-2}\cdot\text{hr}^{-1}

    You used the molecular mass of COX2\ce{CO2} (44.01 g⋅mol−144.01\text{ g}\cdot\text{mol}^{-1}) instead of the atomic mass of elemental carbon (12.01 g⋅mol−112.01\text{ g}\cdot\text{mol}^{-1}). This calculates total COX2\ce{CO2} mass flux rather than elemental carbon flux.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the total headspace moles using the ideal gas law.

You accurately determined the net change in micromoles of carbon dioxide.

You properly computed the area- and time-normalized flux rate of carbon dioxide.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
molar mass confusion

You accidentally used the molar mass of full carbon dioxide (44.01 g⋅mol−144.01\text{ g}\cdot\text{mol}^{-1}) instead of the atomic mass of carbon (12.01 g⋅mol−112.01\text{ g}\cdot\text{mol}^{-1}) for the final conversion.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

In ecosystem carbon cycle flux measurements, reporting units often specify elemental carbon (mg C\text{mg C} or g C\text{g C}) rather than total gas compound mass (mg CO2\text{mg CO}_2). For elemental carbon, each mole of COX2\ce{CO2} contributes exactly 12.01 g12.01\text{ g} of C\ce{C}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Distinguish Gas Mass from Elemental Carbon Mass
  • 1 mol CO21\text{ mol CO}_2 contains 1 mol C1\text{ mol C} (12.01 g12.01\text{ g}) and 2 mol O2\text{ mol O} (32.00 g32.00\text{ g}).

  • Check whether the question asks for mass of COX2\ce{CO2} released or mass of carbon (C\text{C}) released before selecting the molar mass factor.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the target unit: mg C⋅m−2⋅hr−1\text{mg C}\cdot\text{m}^{-2}\cdot\text{hr}^{-1}.

  2. Multiply the molar flux by the atomic mass of carbon: 2.7727 μmol CO2⋅m−2⋅s−1×12.01 μg C⋅μmol−1=33.30 μg C⋅m−2⋅s−1=0.03330 mg C⋅m−2⋅s−12.7727\ \mu\text{mol CO}_2\cdot\text{m}^{-2}\cdot\text{s}^{-1} \times 12.01\ \mu\text{g C}\cdot\mu\text{mol}^{-1} = 33.30\ \mu\text{g C}\cdot\text{m}^{-2}\cdot\text{s}^{-1} = 0.03330\text{ mg C}\cdot\text{m}^{-2}\cdot\text{s}^{-1}.

  3. Convert from seconds to hours: 0.03330 mg C⋅m−2⋅s−1×3600 s⋅hr−1≈120 mg C⋅m−2⋅hr−10.03330\text{ mg C}\cdot\text{m}^{-2}\cdot\text{s}^{-1} \times 3600\text{ s}\cdot\text{hr}^{-1} \approx 120\text{ mg C}\cdot\text{m}^{-2}\cdot\text{hr}^{-1}.

Final answer

2.77 μmol CO2⋅m−2⋅s−12.77\ \mu\text{mol CO}_2\cdot\text{m}^{-2}\cdot\text{s}^{-1}, corresponding to 120 mg C⋅m−2⋅hr−1120\text{ mg C}\cdot\text{m}^{-2}\cdot\text{hr}^{-1}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review biogeochemical unit conversions between mole flux (μmol⋅m−2⋅s−1\mu\text{mol}\cdot\text{m}^{-2}\cdot\text{s}^{-1}), gas mass flux (mg CO2\text{mg CO}_2), and elemental mass flux (mg C\text{mg C}).

  • Practice identifying the required chemical species in ecological stoichiometry word problems.

OverviewACEpath Teacher's Diagnosis

03 The student divides by 3600 instead of multiplying by 3600 when converting seconds to hours, resulting in an erroneous carbon release rate.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    n=1.00⋅10.00.08206⋅293=0.4159 moln = \frac{1.00 \cdot 10.0}{0.08206 \cdot 293} = 0.4159\text{ mol}

  2. Step 2

    Δn=0.4159⋅60×10−6=24.95 μmol\Delta n = 0.4159 \cdot 60 \times 10^{-6} = 24.95\ \mu\text{mol}

  3. Step 3

    Flux=24.950.0500⋅180=2.77 μmol CO2⋅m−2⋅s−1\text{Flux} = \frac{24.95}{0.0500 \cdot 180} = 2.77\ \mu\text{mol CO}_2\cdot\text{m}^{-2}\cdot\text{s}^{-1}

  4. Step 4

    Carbon rate=2.7727⋅12.01×10−33600=9.25×10−6 mg C⋅m−2⋅hr−1\text{Carbon rate} = 2.7727 \cdot \frac{12.01 \times 10^{-3}}{3600} = 9.25 \times 10^{-6}\text{ mg C}\cdot\text{m}^{-2}\cdot\text{hr}^{-1}

    Correct

    FC=2.7727 μmol CO2⋅m−2⋅s−1×12.01×10−3 mg C1 μmol CO2×3600 s1 hr≈120 mg C⋅m−2⋅hr−1F_{\text{C}} = 2.7727\ \mu\text{mol CO}_2\cdot\text{m}^{-2}\cdot\text{s}^{-1} \times \frac{12.01 \times 10^{-3}\text{ mg C}}{1\ \mu\text{mol CO}_2} \times \frac{3600\text{ s}}{1\text{ hr}} \approx 120\text{ mg C}\cdot\text{m}^{-2}\cdot\text{hr}^{-1}

    Because time is in the denominator (exts−1 ext{s}^{-1}), converting from seconds to hours requires multiplying by 3600 s/hr3600\text{ s}/\text{hr}, because more carbon is released in an entire hour than in a single second. Dividing by 36003600 made your hourly rate far too small.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the ideal gas equation to compute the total moles of gas in the headspace.

You applied the mixing ratio difference of 60 ppm60\text{ ppm} accurately to find the moles of CO2\text{CO}_2 produced.

You calculated the soil respiration flux rate correctly with appropriate area and time normalization.

You correctly identified the molar mass factor (12.01×10−3 mg/μmol12.01 \times 10^{-3}\text{ mg}/\mu\text{mol}) for carbon.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit conversion inversion in denominator rates

You divided by 3600 instead of multiplying by 3600 when scaling a rate from per-second to per-hour.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing how dimensional analysis applies to denominator units: converting a quantity (seconds to hours means dividing by 3600) was mistakenly applied to a rate where time is in the denominator (extpersecond ext{per second} to extperhour ext{per hour} requires multiplying by 3600).

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Analysis of Denominator Units
  • When converting a rate unit/s\text{unit}/\text{s} to unit/hr\text{unit}/\text{hr}, use the conversion factor 3600 s1 hr\frac{3600\text{ s}}{1\text{ hr}} so that seconds cancel out from the denominator: units×3600 s1 hr=3600 unithr\frac{\text{unit}}{\text{s}} \times \frac{3600\text{ s}}{1\text{ hr}} = 3600\ \frac{\text{unit}}{\text{hr}}.

  • Always write down full conversion fractions with units to ensure units cancel diagonally before calculating.

Physical Reality Check for Rates
  • An event occurring over an entire hour (3600 seconds3600\text{ seconds}) must accumulate 36003600 times more mass than it does in just one second.

  • Verify that your hourly rate is substantially larger than your per-second rate.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Take the accurate per-second flux: FCO2≈2.7727 μmol⋅m−2⋅s−1F_{\text{CO}_2} \approx 2.7727\ \mu\text{mol}\cdot\text{m}^{-2}\cdot\text{s}^{-1}.

  2. Convert micromoles of CO2\text{CO}_2 to milligrams of carbon: 2.7727×12.01×10−3 mg C⋅μmol−1≈0.03330 mg C⋅m−2⋅s−12.7727 \times 12.01 \times 10^{-3}\text{ mg C}\cdot\mu\text{mol}^{-1} \approx 0.03330\text{ mg C}\cdot\text{m}^{-2}\cdot\text{s}^{-1}.

  3. Multiply by 3600 s⋅hr−13600\text{ s}\cdot\text{hr}^{-1} to scale from seconds to hours: 0.03330×3600≈119.9 mg C⋅m−2⋅hr−10.03330 \times 3600 \approx 119.9\text{ mg C}\cdot\text{m}^{-2}\cdot\text{hr}^{-1}.

Final answer

120 mg C⋅m−2⋅hr−1120\text{ mg C}\cdot\text{m}^{-2}\cdot\text{hr}^{-1} (or 2.77 μmol CO2⋅m−2⋅s−12.77\ \mu\text{mol CO}_2\cdot\text{m}^{-2}\cdot\text{s}^{-1})

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out dimensional fractions explicitly whenever converting compound units.

  • Check whether your target time unit is longer or shorter than the source unit to ensure the numerical rate changes in the expected direction.

Lock it in

Similar question

01

A cylindrical soil chamber with a base radius of r=0.10 mr = 0.10\text{ m} (A=πr2≈0.0314 m2A = \pi r^2 \approx 0.0314\text{ m}^2) accumulates 15.7 μmol15.7\ \mu\text{mol} of COX2\ce{CO2} from decomposer respiration over 250 s250\text{ s}. Calculate the soil respiration flux rate in μmol CO2⋅m−2⋅s−1\mu\text{mol CO}_2\cdot\text{m}^{-2}\cdot\text{s}^{-1}.

Answer

2.0 μmol CO2⋅m−2⋅s−12.0\ \mu\text{mol CO}_2\cdot\text{m}^{-2}\cdot\text{s}^{-1}. Key steps: Calculate F=ΔnA⋅Δt=15.7 μmol0.0314 m2×250 s=15.77.85=2.0 μmol⋅m−2⋅s−1F = \frac{\Delta n}{A \cdot \Delta t} = \frac{15.7\ \mu\text{mol}}{0.0314\text{ m}^2 \times 250\text{ s}} = \frac{15.7}{7.85} = 2.0\ \mu\text{mol}\cdot\text{m}^{-2}\cdot\text{s}^{-1}.

02

A respiration chamber with internal volume V=8.21 LV = 8.21\text{ L} and base area A=0.0400 m2A = 0.0400\text{ m}^2 is placed over grassland soil at T=300 KT = 300\text{ K} and P=1.00 atmP = 1.00\text{ atm} (R=0.0821 L⋅atm⋅mol−1⋅K−1R = 0.0821\text{ L}\cdot\text{atm}\cdot\text{mol}^{-1}\cdot\text{K}^{-1}). The COX2\ce{CO2} concentration increases by 50 ppm50\text{ ppm} in 120 s120\text{ s}. Compute the soil flux rate in μmol CO2⋅m−2⋅s−1\mu\text{mol CO}_2\cdot\text{m}^{-2}\cdot\text{s}^{-1}.

Answer

3.47 μmol CO2⋅m−2⋅s−13.47\ \mu\text{mol CO}_2\cdot\text{m}^{-2}\cdot\text{s}^{-1}. Key steps: (1) Total moles nair=PVRT=1.00×8.210.0821×300=0.3333 moln_{\text{air}} = \frac{PV}{RT} = \frac{1.00 \times 8.21}{0.0821 \times 300} = 0.3333\text{ mol}. (2) ΔnCOX2=0.3333×50×10−6 mol=16.67 μmol\Delta n_{\ce{CO2}} = 0.3333 \times 50 \times 10^{-6}\text{ mol} = 16.67\ \mu\text{mol}. (3) Flux F=16.67 μmol0.0400 m2×120 s=16.674.80≈3.47 μmol CO2⋅m−2⋅s−1F = \frac{16.67\ \mu\text{mol}}{0.0400\text{ m}^2 \times 120\text{ s}} = \frac{16.67}{4.80} \approx 3.47\ \mu\text{mol CO}_2\cdot\text{m}^{-2}\cdot\text{s}^{-1}.

03

An agricultural soil respiration assay measures a carbon release rate of 180 mg C⋅m−2⋅hr−1180\text{ mg C}\cdot\text{m}^{-2}\cdot\text{hr}^{-1}. Assuming microbial respiration is the sole source, what was the measured COX2\ce{CO2} flux in μmol⋅m−2⋅s−1\mu\text{mol}\cdot\text{m}^{-2}\cdot\text{s}^{-1}, and how many total micromoles of COX2\ce{CO2} would be produced inside a 0.080 m20.080\text{ m}^2 chamber over a 300 s300\text{ s} measurement period? (Atomic mass of carbon =12.01 g/mol= 12.01\text{ g/mol})

Answer

Flux =4.16 μmol⋅m−2⋅s−1= 4.16\ \mu\text{mol}\cdot\text{m}^{-2}\cdot\text{s}^{-1}; total COX2\ce{CO2} produced =99.8 μmol= 99.8\ \mu\text{mol}. Key steps: (1) Flux F=180 mg C⋅m−2⋅hr−13600 s/hr×12.01×10−3 mg/μmol≈4.163 μmol CO2⋅m−2⋅s−1F = \frac{180\text{ mg C}\cdot\text{m}^{-2}\cdot\text{hr}^{-1}}{3600\text{ s/hr} \times 12.01 \times 10^{-3}\text{ mg}/\mu\text{mol}} \approx 4.163\ \mu\text{mol CO}_2\cdot\text{m}^{-2}\cdot\text{s}^{-1}. (2) Total moles Δn=F×A×Δt=4.163 μmol⋅m−2⋅s−1×0.080 m2×300 s≈99.8 μmol\Delta n = F \times A \times \Delta t = 4.163\ \mu\text{mol}\cdot\text{m}^{-2}\cdot\text{s}^{-1} \times 0.080\text{ m}^2 \times 300\text{ s} \approx 99.8\ \mu\text{mol}.

Loading workspace…