Resources

An analytical immunology team standardizes an intravenous immunoglobulin (IVIG) preparation against tetanus toxin. A radial immunodiffusion (RID) assay is calibrated with five purified polyclonal IgG\text{IgG} standards. The diameter dd of the circular precipitin ring is related to the applied antigen-antibody equilibrium concentration by the Mancini equation: d2=d02+k⋅Cd^2 = d_0^2 + k \cdot C, where dd is in millimeters (mm\text{mm}), CC is the IgG\text{IgG} concentration in mg/mL\text{mg}/\text{mL}, d0=2.00  mmd_0 = 2.00\;\text{mm} is the diameter of the sample well, and k=4.50  mm2/(mg/mL)k = 4.50\;\text{mm}^2/(\text{mg}/\text{mL}) is the calibrated plate diffusion constant. (a) If an unknown clinical plasma sample yields a precipitin ring with a measured outer diameter d=7.20  mmd = 7.20\;\text{mm}, calculate the IgG\text{IgG} concentration (CC) of the sample in mg/mL\text{mg}/\text{mL}. (b) If the patient's total serum volume is estimated at 3.00  L3.00\;\text{L}, calculate the total intravascular mass of IgG\text{IgG} in grams (gg).

Answer and steps

Final answer

(a) C=10.6  mg/mLC = 10.6\;\text{mg}/\text{mL} (calculated from 7.202=2.002+4.50⋅C  ⟹  51.84=4.00+4.50C  ⟹  4.50C=47.84  ⟹  C=10.63  mg/mL7.20^2 = 2.00^2 + 4.50 \cdot C \implies 51.84 = 4.00 + 4.50 C \implies 4.50 C = 47.84 \implies C = 10.63\;\text{mg}/\text{mL}, rounded to 33 sig figs as 10.6  mg/mL10.6\;\text{mg}/\text{mL}); (b) Total mass =31.9  g= 31.9\;\text{g} (calculated as 10.63  mg/mL×3000  mL=31893  mg≈31.9  g10.63\;\text{mg}/\text{mL} \times 3000\;\text{mL} = 31893\;\text{mg} \approx 31.9\;\text{g}).

Steps

Part (a): Determining the Unknown IgG\text{IgG} Concentration

The Mancini method for radial immunodiffusion (RID) establishes that at diffusion-precipitation equilibrium, the square of the precipitin ring diameter (d2d^2) is directly proportional to the antigen (or antibody) concentration (CC).

The relationship is given by the Mancini equation: d2=d02+k⋅Cd^2 = d_0^2 + k \cdot C

Where:

  • d=7.20 mmd = 7.20\text{ mm} (diameter of the precipitin ring)
  • d0=2.00 mmd_0 = 2.00\text{ mm} (diameter of the central sample well)
  • k=4.50 mm2/(mg/mL)k = 4.50\text{ mm}^2/(\text{mg}/\text{mL}) (plate diffusion constant)
  • CC is the concentration of IgG\text{IgG} in mg/mL\text{mg}/\text{mL}

Step 1: Substitute the given values into the equation (7.20)2=(2.00)2+4.50⋅C(7.20)^2 = (2.00)^2 + 4.50 \cdot C

Step 2: Calculate the squared terms 51.84=4.00+4.50⋅C51.84 = 4.00 + 4.50 \cdot C

Step 3: Isolate and solve for CC 4.50⋅C=51.84−4.004.50 \cdot C = 51.84 - 4.00 4.50⋅C=47.844.50 \cdot C = 47.84 C=47.844.50≈10.631 mg/mLC = \frac{47.84}{4.50} \approx 10.631\text{ mg}/\text{mL}

Rounded to three significant figures, the IgG\text{IgG} concentration is: C=10.6 mg/mLC = 10.6\text{ mg}/\text{mL}

Common Pitfall: Remember to square the diameters (d2d^2 and d02d_0^2) before performing subtraction. Subtracting the unsquared diameters (d−d0)(d - d_0) will produce an incorrect concentration.


Part (b): Calculating Total Intravascular Mass of IgG\text{IgG}

To find the total intravascular mass, multiply the concentration of IgG\text{IgG} by the patient's total serum volume.

Step 1: Convert units to ensure compatibility

  • Serum volume: V=3.00 L=3000 mLV = 3.00\text{ L} = 3000\text{ mL}
  • Concentration: C≈10.631 mg/mLC \approx 10.631\text{ mg}/\text{mL} (keeping unrounded intermediate digits to avoid rounding errors)

Step 2: Calculate the total mass in milligrams Mass=C⋅V=10.631 mg/mL⋅3000 mL=31893 mg\text{Mass} = C \cdot V = 10.631\text{ mg}/\text{mL} \cdot 3000\text{ mL} = 31893\text{ mg}

Step 3: Convert the mass to grams Mass in grams=31893 mg1000 mg/g≈31.89 g\text{Mass in grams} = \frac{31893\text{ mg}}{1000\text{ mg}/\text{g}} \approx 31.89\text{ g}

Rounded to three significant figures, the total intravascular mass is: Total Mass=31.9 g\text{Total Mass} = 31.9\text{ g}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 A student forgets to square the well diameter d0 and the measured diameter d in the Mancini equation, treating the relationship as linear.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    d=d0+k⋅C  ⟹  7.20=2.00+4.50⋅C  ⟹  4.50⋅C=5.20  ⟹  C=5.204.50=1.16 mg/mLd = d_0 + k \cdot C \implies 7.20 = 2.00 + 4.50 \cdot C \implies 4.50 \cdot C = 5.20 \implies C = \frac{5.20}{4.50} = 1.16\text{ mg/mL}

    Correct

    d2=d02+k⋅C  ⟹  7.202=2.002+4.50⋅C  ⟹  51.84=4.00+4.50⋅C  ⟹  C=47.844.50≈10.6 mg/mLd^2 = d_0^2 + k \cdot C \implies 7.20^2 = 2.00^2 + 4.50 \cdot C \implies 51.84 = 4.00 + 4.50 \cdot C \implies C = \frac{47.84}{4.50} \approx 10.6\text{ mg/mL}

    In radial immunodiffusion (RID) at equilibrium, the Mancini equation states that antigen concentration is proportional to the area of the precipitin ring, meaning the diameters must be squared (d2=d02+k⋅Cd^2 = d_0^2 + k \cdot C), rather than related linearly.

  2. Step 2

    Total mass=C⋅V  ⟹  Total mass=1.16 mg/mL⋅3000 mL  ⟹  Total mass=3480 mg=3.48 g\text{Total mass} = C \cdot V \implies \text{Total mass} = 1.16\text{ mg/mL} \cdot 3000\text{ mL} \implies \text{Total mass} = 3480\text{ mg} = 3.48\text{ g}

    Correct

    Total mass=C⋅V=10.63 mg/mL⋅3000 mL=31893 mg≈31.9 g\text{Total mass} = C \cdot V = 10.63\text{ mg/mL} \cdot 3000\text{ mL} = 31893\text{ mg} \approx 31.9\text{ g}

    Your method and unit conversions (3.00 L=3000 mL3.00\text{ L} = 3000\text{ mL} and milligrams to grams) were completely sound, but your final mass value is inaccurate because it carried forward the concentration calculated without squaring the diameters.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly isolated the unknown variable algebraically using your written equation.

You correctly converted the patient's serum volume from 3.00 L3.00\text{ L} to 3000 mL3000\text{ mL}.

You correctly converted the resulting intravascular mass from milligrams to grams.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Linearized Mancini Relationship

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the relationship between ring diameter and antibody concentration as linear (d∝Cd \propto C) rather than areal (d2∝Cd^2 \propto C). In radial immunodiffusion at equilibrium, antigen diffusion expands as a circular front, so concentration is proportional to the precipitin ring area (represented by d2−d02d^2 - d_0^2), not the linear diameter.

REASONING PATH
Your ACEpath teacher’s suggested approach
Square the Diameters in the Mancini Equation
  • The Mancini equation for equilibrium RID is d2=d02+k⋅Cd^2 = d_0^2 + k \cdot C.

  • Always square both the precipitin ring diameter (d2d^2) and the well diameter (d02d_0^2) before solving for concentration.

Check the Units of the Diffusion Constant $k$
  • The constant kk has units of mm2/(mg/mL)\text{mm}^2/(\text{mg}/\text{mL}), which signals that the left-hand terms must have units of mm2\text{mm}^2.

  • Use dimensional analysis on kk to verify whether diameters need to be squared.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute into the correct Mancini equation: d2=d02+k⋅Cd^2 = d_0^2 + k \cdot C

  2. Evaluate the squared diameters: 7.202=2.002+4.50⋅C  ⟹  51.84=4.00+4.50⋅C7.20^2 = 2.00^2 + 4.50 \cdot C \implies 51.84 = 4.00 + 4.50 \cdot C

  3. Subtract d02d_0^2 and isolate CC: 4.50⋅C=47.84  ⟹  C≈10.63 mg/mL4.50 \cdot C = 47.84 \implies C \approx 10.63\text{ mg/mL}

  4. Recalculate total mass: Mass=10.63 mg/mL⋅3000 mL=31893 mg≈31.9 g\text{Mass} = 10.63\text{ mg/mL} \cdot 3000\text{ mL} = 31893\text{ mg} \approx 31.9\text{ g}

Final answer

(a) C=10.6 mg/mLC = 10.6\text{ mg/mL}; (b) Total mass=31.9 g\text{Total mass} = 31.9\text{ g}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the biophysical basis of radial immunodiffusion: diffusion occurs radially in two dimensions, so precipitin ring area (proportional to d2d^2) reflects total antigen amount.

  • Practice dimensional analysis by inspecting constant units (e.g., mm2\text{mm}^2) to confirm whether variable terms must be squared.

  • Redo similar RID problems comparing the Fahey kinetic method (d∝log⁡Cd \propto \log C) with the Mancini equilibrium method (d2∝Cd^2 \propto C).

OverviewACEpath Teacher's Diagnosis

02 A student forgets to subtract the well term d0² from d², solving d² = k · C directly.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    d2=k⋅C  ⟹  (7.20)2=4.50⋅C  ⟹  51.84=4.50⋅C  ⟹  C=51.844.50=11.52  mg/mLd^2 = k \cdot C \implies (7.20)^2 = 4.50 \cdot C \implies 51.84 = 4.50 \cdot C \implies C = \frac{51.84}{4.50} = 11.52\;\text{mg}/\text{mL}

    Correct

    d2=d02+k⋅C  ⟹  7.202=2.002+4.50⋅C  ⟹  51.84=4.00+4.50C  ⟹  C=47.844.50≈10.6  mg/mLd^2 = d_0^2 + k \cdot C \implies 7.20^2 = 2.00^2 + 4.50 \cdot C \implies 51.84 = 4.00 + 4.50 C \implies C = \frac{47.84}{4.50} \approx 10.6\;\text{mg}/\text{mL}

    You omitted the sample well diameter term d02=2.002=4.00  mm2d_0^2 = 2.00^2 = 4.00\;\text{mm}^2 from the Mancini equation. Before dividing by the diffusion constant kk, you need to subtract d02d_0^2 from the total ring diameter squared d2d^2.

  2. Step 2

    Total mass=11.52  mg/mL⋅3000  mL  ⟹  Total mass=34560  mg=34.56  g\text{Total mass} = 11.52\;\text{mg}/\text{mL} \cdot 3000\;\text{mL} \implies \text{Total mass} = 34560\;\text{mg} = 34.56\;\text{g}

    Correct

    Total mass=10.63  mg/mL⋅3000  mL=31893  mg≈31.9  g\text{Total mass} = 10.63\;\text{mg}/\text{mL} \cdot 3000\;\text{mL} = 31893\;\text{mg} \approx 31.9\;\text{g}

    Your unit conversion from liters to milliliters and from milligrams to grams was executed correctly, but your final answer is numerically off because it relies on the uncorrected concentration from part (a).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly squared the outer precipitin diameter d=7.20  mmd = 7.20\;\text{mm} to obtain 51.84  mm251.84\;\text{mm}^2.

You converted 3.00  L3.00\;\text{L} to 3000  mL3000\;\text{mL} and converted the resulting milligrams to grams accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Initial Well Area Term

You wrote d2=k⋅Cd^2 = k \cdot C instead of including the central well diameter term d02d_0^2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the precipitin ring area as originating from a point source at zero area rather than accounting for the physical initial diameter d0d_0 of the punch well from which diffusion begins.

REASONING PATH
Your ACEpath teacher’s suggested approach
Include the Well Diameter Offset
  • The Mancini equation is d2=d02+k⋅Cd^2 = d_0^2 + k \cdot C, where d0d_0 is the non-zero diameter of the punch well.

  • Always subtract the well term d02d_0^2 from the outer diameter squared d2d^2 before dividing by diffusion constant kk.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute the known values: 7.202=2.002+4.50⋅C7.20^2 = 2.00^2 + 4.50 \cdot C.

  2. Evaluate the squares: 51.84=4.00+4.50⋅C51.84 = 4.00 + 4.50 \cdot C.

  3. Subtract the well area term: 4.50⋅C=51.84−4.00=47.844.50 \cdot C = 51.84 - 4.00 = 47.84.

  4. Solve for concentration: C=47.844.50≈10.63  mg/mLC = \frac{47.84}{4.50} \approx 10.63\;\text{mg}/\text{mL}.

  5. Multiply by the serum volume: Total mass=10.631  mg/mL×3000  mL=31893  mg≈31.9  g\text{Total mass} = 10.631\;\text{mg}/\text{mL} \times 3000\;\text{mL} = 31893\;\text{mg} \approx 31.9\;\text{g}.

Final answer

(a) C=10.6  mg/mLC = 10.6\;\text{mg}/\text{mL}; (b) Total mass=31.9  g\text{Total mass} = 31.9\;\text{g}

NEXT STEPS
Final Takeaways from Your Teacher
  • When using the Mancini formula, underline d0d_0 in the problem text and write down the full equation d2=d02+k⋅Cd^2 = d_0^2 + k \cdot C before inserting numerical values.

  • Practice isolating C=d2−d02kC = \frac{d^2 - d_0^2}{k} symbolically first to prevent dropping the baseline well term.

OverviewACEpath Teacher's Diagnosis

03 A student correctly calculates the concentration but fails to convert volume from liters to milliliters, resulting in an answer off by a factor of 1000.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    (7.20)2=(2.00)2+4.50⋅C  ⟹  51.84=4.00+4.50⋅C  ⟹  47.84=4.50⋅C  ⟹  C=47.844.50=10.63 mg/mL(7.20)^2 = (2.00)^2 + 4.50 \cdot C \implies 51.84 = 4.00 + 4.50 \cdot C \implies 47.84 = 4.50 \cdot C \implies C = \frac{47.84}{4.50} = 10.63\text{ mg}/\text{mL}

  2. Step 2

    Total mass=C⋅V  ⟹  Total mass=10.63 mg/mL⋅3.00 L  ⟹  Total mass=31.89 mg=0.0319 g\text{Total mass} = C \cdot V \implies \text{Total mass} = 10.63\text{ mg}/\text{mL} \cdot 3.00\text{ L} \implies \text{Total mass} = 31.89\text{ mg} = 0.0319\text{ g}

    Correct

    Total mass=10.63 mg/mL×3000 mL=31890 mg≈31.9 g\text{Total mass} = 10.63\text{ mg}/\text{mL} \times 3000\text{ mL} = 31890\text{ mg} \approx 31.9\text{ g}

    You multiplied volume in liters (L\text{L}) directly by concentration in milligrams per milliliter (mg/mL\text{mg}/\text{mL}). Because the volume units mL\text{mL} and L\text{L} do not cancel, you must convert 3.00 L3.00\text{ L} to 3000 mL3000\text{ mL} (or convert 10.63 mg/mL10.63\text{ mg}/\text{mL} to 10.63 g/L10.63\text{ g}/\text{L}) before computing the product.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled and substituted the values into the Mancini equation.

You isolated the unknown concentration variable accurately through algebraic manipulation.

You correctly identified that total mass is the product of concentration and total volume.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incompatible Volume Units in Mass Calculation

You multiplied concentration in mg/mL\text{mg}/\text{mL} directly by 3.00 L3.00\text{ L} without converting liters to milliliters first.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You omitted unit tracking and dimensional cancellation during the substitution step, treating the numerical values as unitless and resulting in an answer that was three orders of magnitude too small.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Consistency Check
  • When computing mass=concentration×volume\text{mass} = \text{concentration} \times \text{volume}, the volume unit in the denominator of concentration must match the unit of total volume: mgmL×mL=mg\frac{\text{mg}}{\text{mL}} \times \text{mL} = \text{mg}.

  • Always write out the units explicitly with every numerical value and cancel matching numerator and denominator units before completing the calculation.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the serum volume from liters to milliliters: V=3.00 L=3000 mLV = 3.00\text{ L} = 3000\text{ mL}.

  2. Multiply the concentration by the converted volume: Mass=10.631 mg/mL×3000 mL=31893 mg\text{Mass} = 10.631\text{ mg}/\text{mL} \times 3000\text{ mL} = 31893\text{ mg}.

  3. Convert milligrams to grams: Mass=31893 mg1000 mg/g≈31.9 g\text{Mass} = \frac{31893\text{ mg}}{1000\text{ mg}/\text{g}} \approx 31.9\text{ g}.

Final answer

31.9 g31.9\text{ g}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always perform dimensional analysis by writing units alongside numbers during substitutions.

  • Remember the standard laboratory equivalence: 1 mg/mL=1 g/L1\text{ mg}/\text{mL} = 1\text{ g}/\text{L}.

Lock it in

Similar question

01

A clinical immunologist performs a Mancini radial immunodiffusion assay to quantify serum IgA\text{IgA}. The calibration curve obeys d2=d02+k⋅Cd^2 = d_0^2 + k \cdot C, where d0=3.00 mmd_0 = 3.00\text{ mm} and k=8.00 mm2/(mg/mL)k = 8.00\text{ mm}^2/(\text{mg}/\text{mL}). A patient's serum sample produces a precipitin ring of outer diameter d=9.00 mmd = 9.00\text{ mm}. Calculate the patient's IgA\text{IgA} concentration in mg/mL\text{mg}/\text{mL}.

Answer

C=9.00 mg/mLC = 9.00\text{ mg/mL}. Steps: d2=9.002=81.00 mm2d^2 = 9.00^2 = 81.00\text{ mm}^2; d02=3.002=9.00 mm2d_0^2 = 3.00^2 = 9.00\text{ mm}^2; k⋅C=81.00−9.00=72.00 mm2k \cdot C = 81.00 - 9.00 = 72.00\text{ mm}^2; C=72.008.00=9.00 mg/mLC = \frac{72.00}{8.00} = 9.00\text{ mg/mL}.

02

In a Mancini RID assay for IgM\text{IgM}, the well diameter is d0=2.00 mmd_0 = 2.00\text{ mm} and the slope constant is k=12.0 mm2/(mg/mL)k = 12.0\text{ mm}^2/(\text{mg}/\text{mL}). (a) An unknown sample yields a precipitin diameter of 8.00 mm8.00\text{ mm}. Find its concentration CC. (b) If the sample was pre-diluted 1:41:4 with buffer before loading into the well, calculate the true undiluted serum IgM\text{IgM} concentration.

Answer

(a) Cwell=5.00 mg/mLC_\text{well} = 5.00\text{ mg/mL}; (b) Ctrue=20.0 mg/mLC_\text{true} = 20.0\text{ mg/mL}. Steps: (a) d2−d02=8.002−2.002=64.0−4.00=60.0 mm2d^2 - d_0^2 = 8.00^2 - 2.00^2 = 64.0 - 4.00 = 60.0\text{ mm}^2; Cwell=60.012.0=5.00 mg/mLC_\text{well} = \frac{60.0}{12.0} = 5.00\text{ mg/mL}. (b) Multiply by the dilution factor: 5.00 mg/mL×4=20.0 mg/mL5.00\text{ mg/mL} \times 4 = 20.0\text{ mg/mL}.

03

A standard curve for an RID assay gives precipitin diameters of 4.00 mm4.00\text{ mm} for C1=2.00 mg/mLC_1 = 2.00\text{ mg/mL} and 6.00 mm6.00\text{ mm} for C2=6.00 mg/mLC_2 = 6.00\text{ mg/mL} at equilibrium. Assuming the Mancini equation d2=d02+k⋅Cd^2 = d_0^2 + k \cdot C holds: (a) Determine the plate constant kk and the well diameter d0d_0. (b) Calculate the expected ring diameter dd for a standard of concentration C3=10.0 mg/mLC_3 = 10.0\text{ mg/mL}.

Answer

(a) k=5.00 mm2/(mg/mL)k = 5.00\text{ mm}^2/(\text{mg}/\text{mL}), d0=2.45 mmd_0 = 2.45\text{ mm}; (b) d=7.48 mmd = 7.48\text{ mm}. Steps: (a) Subtract equations: d22−d12=k(C2−C1)  ⟹  36.0−16.0=k(6.00−2.00)  ⟹  20.0=4.00k  ⟹  k=5.00 mm2/(mg/mL)d_2^2 - d_1^2 = k(C_2 - C_1) \implies 36.0 - 16.0 = k(6.00 - 2.00) \implies 20.0 = 4.00 k \implies k = 5.00\text{ mm}^2/(\text{mg}/\text{mL}). Then d02=16.0−5.00(2.00)=6.00 mm2  ⟹  d0=6.00≈2.45 mmd_0^2 = 16.0 - 5.00(2.00) = 6.00\text{ mm}^2 \implies d_0 = \sqrt{6.00} \approx 2.45\text{ mm}. (b) For C3=10.0 mg/mLC_3 = 10.0\text{ mg/mL}: d32=6.00+5.00(10.0)=56.0 mm2  ⟹  d3=56.0≈7.48 mmd_3^2 = 6.00 + 5.00(10.0) = 56.0\text{ mm}^2 \implies d_3 = \sqrt{56.0} \approx 7.48\text{ mm}.

Loading workspace…