Resources

An agronomy team analyzes root hydrotropism toward a subsurface irrigation drip line. In the rhizosphere, soil matric water potential ψm\psi_m increases from −1.40 MPa-1.40\text{ MPa} at horizontal position x1=0.0 cmx_1 = 0.0\text{ cm} to −200 kPa-200\text{ kPa} at x2=6.00 cmx_2 = 6.00\text{ cm}. A lateral corn root of initial length L0=15.0 mmL_0 = 15.0\text{ mm} grows toward the higher water potential zone. The rate of differential cell elongation between the moist-facing side and the dry-facing side is given by Δv=Kw∣dψmdx∣\Delta v = K_w \left|\frac{d\psi_m}{dx}\right|, where the biological responsiveness constant is Kw=1.25×10−4 mm2/(h⋅bar)K_w = 1.25\times 10^{-4}\text{ mm}^2/(\text{h}\cdot\text{bar}). Given that 1.00 bar=100 kPa=0.100 MPa1.00\text{ bar} = 100\text{ kPa} = 0.100\text{ MPa}: (a) convert the matric water potential gradient ∣dψmdx∣\left|\frac{d\psi_m}{dx}\right| into units of bar/cm\text{bar/cm}, and (b) calculate the differential elongation velocity Δv\Delta v across the root in μm/h\mu\text{m/h}.

Answer and steps

Final answer

(a) ∣dψmdx∣=2.00 bar/cm\left|\frac{d\psi_m}{dx}\right| = 2.00\text{ bar/cm}; (b) Δv=0.250 μm/h\Delta v = 0.250\,\mu\text{m/h}

Steps

Part (a): Calculating the Matric Water Potential Gradient

  1. Convert the matric potentials to bars: The conversion factor given is 1.00 bar=100 kPa=0.100 MPa1.00\text{ bar} = 100\text{ kPa} = 0.100\text{ MPa}.

    • At position x1=0.0 cmx_1 = 0.0\text{ cm}: ψm1=−1.40 MPa=−1.40 MPa0.100 MPa/bar=−14.0 bar\psi_{m1} = -1.40\text{ MPa} = \frac{-1.40\text{ MPa}}{0.100\text{ MPa/bar}} = -14.0\text{ bar}
    • At position x2=6.00 cmx_2 = 6.00\text{ cm}: ψm2=−200 kPa=−200 kPa100 kPa/bar=−2.00 bar\psi_{m2} = -200\text{ kPa} = \frac{-200\text{ kPa}}{100\text{ kPa/bar}} = -2.00\text{ bar}
  2. Compute the gradient across the distance: The magnitude of the matric potential gradient is given by the change in potential divided by the distance: ∣dψmdx∣=∣ψm2−ψm1∣x2−x1\left|\frac{d\psi_m}{dx}\right| = \frac{|\psi_{m2} - \psi_{m1}|}{x_2 - x_1} ∣dψmdx∣=∣−2.00 bar−(−14.0 bar)∣6.00 cm−0.0 cm=12.0 bar6.00 cm=2.00 bar/cm\left|\frac{d\psi_m}{dx}\right| = \frac{|-2.00\text{ bar} - (-14.0\text{ bar})|}{6.00\text{ cm} - 0.0\text{ cm}} = \frac{12.0\text{ bar}}{6.00\text{ cm}} = 2.00\text{ bar/cm}

Part (b): Determining the Differential Elongation Velocity

  1. Calculate the differential velocity Δv\Delta v: Root hydrotropism is driven by asymmetric cell elongation in the elongation zone, bending the root toward the region of higher water potential (wetter soil). Using the responsiveness formula: Δv=Kw∣dψmdx∣\Delta v = K_w \left|\frac{d\psi_m}{dx}\right| Substitute Kw=1.25×10−4 mm2/(h⋅bar)K_w = 1.25 \times 10^{-4}\text{ mm}^2/(\text{h}\cdot\text{bar}) and the gradient value of 2.00 bar/cm2.00\text{ bar/cm}: Δv=(1.25×10−4 mm2/(h⋅bar))×2.00 bar/cm=2.50×10−4 mm/h\Delta v = (1.25 \times 10^{-4}\text{ mm}^2/(\text{h}\cdot\text{bar})) \times 2.00\text{ bar/cm} = 2.50 \times 10^{-4}\text{ mm/h}
  2. Convert the velocity from mm/h\text{mm/h} to μm/h\mu\text{m/h}: Since 1 mm=1000 μm1\text{ mm} = 1000\,\mu\text{m}: Δv=2.50×10−4 mm/h×1000 μm/mm=0.250 μm/h\Delta v = 2.50 \times 10^{-4}\text{ mm/h} \times 1000\,\mu\text{m/mm} = 0.250\,\mu\text{m/h}

(Note: The initial root length L0=15.0 mmL_0 = 15.0\text{ mm} is background context and does not affect the local rate of differential elongation across the root tip.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert centimeters to millimeters in the denominator of the gradient when multiplying by mm², yielding an answer that is ten times too large.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Δψm=−0.200 MPa−(−1.40 MPa)=1.20 MPa  ⟹  1.20 MPa=12.0 bar  ⟹  ∣dψmdx∣=12.0 bar6.00 cm=2.00 bar/cm\Delta\psi_m = -0.200\text{ MPa} - (-1.40\text{ MPa}) = 1.20\text{ MPa} \implies 1.20\text{ MPa} = 12.0\text{ bar} \implies \left|\frac{d\psi_m}{dx}\right| = \frac{12.0\text{ bar}}{6.00\text{ cm}} = 2.00\text{ bar/cm}

  2. Step 2

    Δv=Kw∣dψmdx∣  ⟹  Δv=1.25×10−4 mm2/(h⋅bar)×2.00 bar/cm  ⟹  Δv=2.50×10−4 mm/h\Delta v = K_w \left|\frac{d\psi_m}{dx}\right| \implies \Delta v = 1.25 \times 10^{-4}\text{ mm}^2/(\text{h}\cdot\text{bar}) \times 2.00\text{ bar/cm} \implies \Delta v = 2.50 \times 10^{-4}\text{ mm/h}

    Correct

    Δv=1.25×10−4 mm2/(h⋅bar)×(2.00 bar10 mm)=2.50×10−5 mm/h\Delta v = 1.25 \times 10^{-4}\text{ mm}^2/(\text{h}\cdot\text{bar}) \times \left(\frac{2.00\text{ bar}}{10\text{ mm}}\right) = 2.50 \times 10^{-5}\text{ mm/h}

    You multiplied KwK_w (which contains mm2\text{mm}^2) directly by the gradient in bar/cm\text{bar/cm} without harmonizing length units. Dividing mm2\text{mm}^2 by cm\text{cm} does not yield mm\text{mm}; since 1 cm=10 mm1\text{ cm} = 10\text{ mm}, the gradient is 0.200 bar/mm0.200\text{ bar/mm}, giving Δv=2.50×10−5 mm/h\Delta v = 2.50 \times 10^{-5}\text{ mm/h}.

  3. Step 3

    Δv=2.50×10−4×1000 μm/h=0.250 μm/h\Delta v = 2.50 \times 10^{-4} \times 1000\,\mu\text{m/h} = 0.250\,\mu\text{m/h}

    Correct

    Δv=2.50×10−5 mm/h×1000 μm/mm=0.0250 μm/h\Delta v = 2.50 \times 10^{-5}\text{ mm/h} \times 1000\,\mu\text{m/mm} = 0.0250\,\mu\text{m/h}

    Your conversion factor from millimeters to micrometers was applied correctly, but the numerical answer inherits the ten-fold overestimation from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately converted soil matric water potential from megapascals and kilopascals into bars.

You correctly calculated the magnitude of the matric potential gradient across the rhizosphere distance.

You selected the correct biophysical relation for differential root elongation velocity.

You correctly applied the conversion factor between millimeters and micrometers.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Mismatch in Dimensional Analysis

You treated mm2/cm\text{mm}^2 / \text{cm} as equal to mm\text{mm}, omitting the factor of 10 mm/cm10\text{ mm/cm} in the denominator.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Incomplete dimensional reconciliation across composite units: when rate constants and spatial gradients mix different length scales (such as millimeters and centimeters), every length dimension must be converted to a common base unit before simplifying the product.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Composite Dimensions
  • When multiplying quantities with length terms in both numerator and denominator, ensure both lengths share the identical unit: mm2cm=mm210 mm=0.1 mm\frac{\text{mm}^2}{\text{cm}} = \frac{\text{mm}^2}{10\text{ mm}} = 0.1\text{ mm}.

  • Write out full unit fractions and cancel unit names explicitly before performing numerical multiplication.

Convert Gradients to Match Constant Dimensions
  • If a biological responsiveness constant KK is calibrated in mm\text{mm}, convert spatial gradients dψdx\frac{d\psi}{dx} from bar/cm\text{bar/cm} to bar/mm\text{bar/mm} using 1 cm=10 mm1\text{ cm} = 10\text{ mm}.

  • Divide gradients given per centimeter by 1010 before multiplying by constants expressed in square millimeters.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the gradient to millimeters: ∣dψmdx∣=2.00 bar1 cm×1 cm10 mm=0.200 bar/mm\left|\frac{d\psi_m}{dx}\right| = \frac{2.00\text{ bar}}{1\text{ cm}} \times \frac{1\text{ cm}}{10\text{ mm}} = 0.200\text{ bar/mm}.

  2. Calculate differential elongation velocity: Δv=(1.25×10−4 mm2/(h⋅bar))×0.200 bar/mm=2.50×10−5 mm/h\Delta v = (1.25 \times 10^{-4}\text{ mm}^2/(\text{h}\cdot\text{bar})) \times 0.200\text{ bar/mm} = 2.50 \times 10^{-5}\text{ mm/h}.

  3. Convert to micrometers per hour: Δv=2.50×10−5 mm/h×1000 μm/mm=0.0250 μm/h\Delta v = 2.50 \times 10^{-5}\text{ mm/h} \times 1000\,\mu\text{m/mm} = 0.0250\,\mu\text{m/h}.

Final answer

(a) ∣dψmdx∣=2.00 bar/cm\left|\frac{d\psi_m}{dx}\right| = 2.00\text{ bar/cm}; (b) Δv=0.0250 μm/h\Delta v = 0.0250\,\mu\text{m/h}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out full dimensional units alongside every numerical substitution rather than dropping unit names until the end.

  • Highlight mixed metric prefixes (such as cm\text{cm} and mm\text{mm}) before carrying out algebraic products.

  • Practice gradient rate calculations where physical constants and field measurements are provided in different unit prefixes.

OverviewACEpath Teacher's Diagnosis

02 The student subtracts the numerical values directly without converting kPa to MPa or bar, miscalculating Δψ_m.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Δψm=−200−(−1.40)=−198.6 bar\Delta\psi_m = -200 - (-1.40) = -198.6\text{ bar}

    Correct

    ψm1=−1.40 MPa=−14.0 bar,  ψm2=−200 kPa=−2.00 bar  ⟹  Δψm=−2.00−(−14.0)=12.0 bar\psi_{m1} = -1.40\text{ MPa} = -14.0\text{ bar},\; \psi_{m2} = -200\text{ kPa} = -2.00\text{ bar} \implies \Delta\psi_m = -2.00 - (-14.0) = 12.0\text{ bar}

    You subtracted the numerical value of ψm1\psi_{m1} in MPa\text{MPa} directly from ψm2\psi_{m2} in kPa\text{kPa} without first converting both into bar\text{bar} using the given conversion factors (1.00 bar=100 kPa=0.100 MPa1.00\text{ bar} = 100\text{ kPa} = 0.100\text{ MPa}).

  2. Step 2

    ∣dψmdx∣=198.6 bar6.00 cm=33.1 bar/cm\left|\frac{d\psi_m}{dx}\right| = \frac{198.6\text{ bar}}{6.00\text{ cm}} = 33.1\text{ bar/cm}

    Correct

    ∣dψmdx∣=12.0 bar6.00 cm=2.00 bar/cm\left|\frac{d\psi_m}{dx}\right| = \frac{12.0\text{ bar}}{6.00\text{ cm}} = 2.00\text{ bar/cm}

    You correctly divided the potential difference by the distance Δx=6.00 cm\Delta x = 6.00\text{ cm}, but this step is affected by your earlier miscalculated Δψm\Delta\psi_m.

  3. Step 3

    Δv=Kw∣dψmdx∣  ⟹  ∣dψmdx∣=33.1 bar10 mm=3.31 bar/mm\Delta v = K_w \left|\frac{d\psi_m}{dx}\right| \implies \left|\frac{d\psi_m}{dx}\right| = \frac{33.1\text{ bar}}{10\text{ mm}} = 3.31\text{ bar/mm}

    Correct

    Δv=Kw∣dψmdx∣=(1.25×10−4 mm2/(h⋅bar))×2.00 bar/cm=2.50×10−4 mm/h\Delta v = K_w \left|\frac{d\psi_m}{dx}\right| = (1.25\times 10^{-4}\text{ mm}^2/(\text{h}\cdot\text{bar})) \times 2.00\text{ bar/cm} = 2.50\times 10^{-4}\text{ mm/h}

    You recognized the formula Δv=Kw∣dψmdx∣\Delta v = K_w \left|\frac{d\psi_m}{dx}\right|, but the input gradient was carrying your previous calculation error.

  4. Step 4

    Δv=1.25×10−4 mm2/(h⋅bar)×3.31 bar/mm  ⟹  Δv=4.14×10−4×1000 μm/h=0.414 μm/h\Delta v = 1.25\times 10^{-4}\text{ mm}^2/(\text{h}\cdot\text{bar}) \times 3.31\text{ bar/mm} \implies \Delta v = 4.14\times 10^{-4}\times 1000\,\mu\text{m/h} = 0.414\,\mu\text{m/h}

    Correct

    Δv=2.50×10−4 mm/h×1000 μm/mm=0.250 μm/h\Delta v = 2.50\times 10^{-4}\text{ mm/h} \times 1000\,\mu\text{m/mm} = 0.250\,\mu\text{m/h}

    Your conversion from mm/h\text{mm/h} to μm/h\mu\text{m/h} was performed correctly, but the resulting numerical value reflects the earlier incorrect potential difference.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled the definition of a gradient as the change in water potential divided by spatial distance.

You correctly applied the differential elongation velocity formula Δv=Kw∣dψmdx∣\Delta v = K_w \left|\frac{d\psi_m}{dx}\right|.

You converted your final velocity from mm/h\text{mm/h} to μm/h\mu\text{m/h} using the correct factor of 1000 μm/mm1000\,\mu\text{m/mm}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion Error

You combined −200-200 and −1.40-1.40 into a single arithmetic subtraction while ignoring their mismatched units of kPa\text{kPa} and MPa\text{MPa}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated physical quantities as bare numbers during subtraction instead of converting all water potential measurements to the required base unit (bar\text{bar}) before computing the gradient.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match Units Before Subtracting
  • Before calculating ΔY=Y2−Y1\Delta Y = Y_2 - Y_1, ensure both Y1Y_1 and Y2Y_2 share the exact same units.

  • Convert −1.40 MPa-1.40\text{ MPa} and −200 kPa-200\text{ kPa} into bar\text{bar} individually before taking their difference.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert each potential to bar\text{bar}: ψm1=−1.40 MPa0.100 MPa/bar=−14.0 bar\psi_{m1} = \frac{-1.40\text{ MPa}}{0.100\text{ MPa/bar}} = -14.0\text{ bar}, and ψm2=−200 kPa100 kPa/bar=−2.00 bar\psi_{m2} = \frac{-200\text{ kPa}}{100\text{ kPa/bar}} = -2.00\text{ bar}.

  2. Compute the gradient: ∣dψmdx∣=∣−2.00−(−14.0)∣ bar6.00 cm=12.0 bar6.00 cm=2.00 bar/cm\left|\frac{d\psi_m}{dx}\right| = \frac{|-2.00 - (-14.0)|\text{ bar}}{6.00\text{ cm}} = \frac{12.0\text{ bar}}{6.00\text{ cm}} = 2.00\text{ bar/cm}.

  3. Compute Δv\Delta v: Δv=(1.25×10−4 mm2/(h⋅bar))×2.00 bar/cm=2.50×10−4 mm/h\Delta v = (1.25\times 10^{-4}\text{ mm}^2/(\text{h}\cdot\text{bar})) \times 2.00\text{ bar/cm} = 2.50\times 10^{-4}\text{ mm/h}.

  4. Convert to μm/h\mu\text{m/h}: 2.50×10−4 mm/h×1000 μm/mm=0.250 μm/h2.50\times 10^{-4}\text{ mm/h} \times 1000\,\mu\text{m/mm} = 0.250\,\mu\text{m/h}.

Final answer

(a) ∣dψmdx∣=2.00 bar/cm\left|\frac{d\psi_m}{dx}\right| = 2.00\text{ bar/cm}; (b) Δv=0.250 μm/h\Delta v = 0.250\,\mu\text{m/h}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write down the explicit unit next to each number before entering it into a difference formula.

  • Verify that prefixes like mega- (M\text{M}) and kilo- (k\text{k}) are reconciled to the target unit before completing any arithmetic.

OverviewACEpath Teacher's Diagnosis

03 The student misinterprets the root length L_0 as the gradient distance instead of using the spatial position interval Δx.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Δψm=−0.200 MPa−(−1.40 MPa)=1.20 MPa=12.0 bar\Delta\psi_m = -0.200\text{ MPa} - (-1.40\text{ MPa}) = 1.20\text{ MPa} = 12.0\text{ bar}

  2. Step 2

    Δx=15.0 mm=1.50 cm  ⟹  ∣dψmdx∣=12.0 bar1.50 cm=8.00 bar/cm\Delta x = 15.0\text{ mm} = 1.50\text{ cm} \implies \left|\frac{d\psi_m}{dx}\right| = \frac{12.0\text{ bar}}{1.50\text{ cm}} = 8.00\text{ bar/cm}

    Correct

    Δx=x2−x1=6.00 cm−0.0 cm=6.00 cm  ⟹  ∣dψmdx∣=12.0 bar6.00 cm=2.00 bar/cm\Delta x = x_2 - x_1 = 6.00\text{ cm} - 0.0\text{ cm} = 6.00\text{ cm} \implies \left|\frac{d\psi_m}{dx}\right| = \frac{12.0\text{ bar}}{6.00\text{ cm}} = 2.00\text{ bar/cm}

    You substituted the root's initial length L0=15.0 mmL_0 = 15.0\text{ mm} for Δx\Delta x. The spatial gradient in the soil is measured across the distance between the two soil measurement points, x2−x1=6.00 cmx_2 - x_1 = 6.00\text{ cm}.

  3. Step 3

    Δ\Delta v = K_w ∣dψmdx∣\left|\frac{d\psi_m}{dx}\right|   ⟹  \implies ∣dψmdx∣\left|\frac{d\psi_m}{dx}\right| = 8.00 bar10 mm\frac{8.00\text{ bar}}{10\text{ mm}} = 0.800 bar/mm\text{ bar/mm}   ⟹  \implies Δ\Delta v = 1.25×\times 10^{-4} mm\text{ mm}^2/(\text{h}$$\cdot$$\text{bar}) ×\times 0.800 bar/mm\text{ bar/mm} = 1.00×\times 10^{-4} mm/h\text{ mm/h}   ⟹  \implies Δ\Delta v = 0.100,$\mum/h\text{m/h}

    Correct

    Δ\Delta v = K_w ∣dψmdx∣\left|\frac{d\psi_m}{dx}\right| = (1.25×\times 10^{-4} mm\text{ mm}^2/(\text{h}$$\cdot$$\text{bar})) ×\times 2.00 bar/cm\text{ bar/cm} = 2.50×\times 10^{-4} mm/h\text{ mm/h} = 0.250,$\mum/h\text{m/h}

    Your calculation of the differential velocity carried forward the incorrect gradient value from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted all water potentials to consistent bar units.

You correctly identified the hydrotropic response equation Δv=Kw∣dψmdx∣\Delta v = K_w \left|\frac{d\psi_m}{dx}\right|.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Variable confusion: organ dimension vs. environmental field coordinate

You set Δx\Delta x equal to the root's anatomical length L0=15.0 mmL_0 = 15.0\text{ mm} rather than the soil position difference x2−x1=6.00 cmx_2 - x_1 = 6.00\text{ cm}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated an anatomical dimension of the responding organ (root length L0L_0) with the spatial separation across which the environmental stimulus gradient (dψm/dxd\psi_m/dx) exists in the soil matrix.

REASONING PATH
Your ACEpath teacher’s suggested approach
Environmental Gradient vs. Organ Size
  • Environmental gradients dΦdx\frac{d\Phi}{dx} depend solely on external field coordinates (x1,x2)(x_1, x_2), not the physical dimensions of the organism situated within the field.

  • Always compute Δx\Delta x as x2−x1x_2 - x_1 from the designated field or soil coordinate markers before looking at plant dimensions.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the soil coordinate interval: Δx=x2−x1=6.00 cm−0.0 cm=6.00 cm\Delta x = x_2 - x_1 = 6.00\text{ cm} - 0.0\text{ cm} = 6.00\text{ cm}.

  2. Calculate the true soil matric potential gradient: ∣dψmdx∣=12.0 bar6.00 cm=2.00 bar/cm\left|\frac{d\psi_m}{dx}\right| = \frac{12.0\text{ bar}}{6.00\text{ cm}} = 2.00\text{ bar/cm}.

  3. Substitute into the responsiveness formula: Δv=(1.25×10−4 mm2/(h⋅bar))×2.00 bar/cm=2.50×10−4 mm/h\Delta v = (1.25\times 10^{-4}\text{ mm}^2/(\text{h}\cdot\text{bar})) \times 2.00\text{ bar/cm} = 2.50\times 10^{-4}\text{ mm/h}.

  4. Convert elongation velocity from mm/h\text{mm/h} to μm/h\mu\text{m/h}: 2.50×10−4 mm/h×1000 μm/mm=0.250 μm/h2.50\times 10^{-4}\text{ mm/h} \times 1000\,\mu\text{m/mm} = 0.250\,\mu\text{m/h}.

Final answer

(a) ∣dψmdx∣=2.00 bar/cm\left|\frac{d\psi_m}{dx}\right| = 2.00\text{ bar/cm}; (b) Δv=0.250 μm/h\Delta v = 0.250\,\mu\text{m/h}

NEXT STEPS
Final Takeaways from Your Teacher
  • Before setting up a spatial derivative or gradient ΔYΔx\frac{\Delta Y}{\Delta x}, highlight the coordinate positions of the medium in the problem text to distinguish them from biological organ measurements.

  • Practice separating background biological descriptions (such as initial root or stem length) from external environmental field variables.

Lock it in

Similar question

01

A primary root encounters a moisture gradient of 4.00 bar/cm4.00\text{ bar/cm}. If its hydrotropic responsiveness constant is Kw=2.00×10−4 mm2/(h⋅bar)K_w = 2.00 \times 10^{-4}\text{ mm}^2/(\text{h}\cdot\text{bar}), calculate the differential elongation velocity Δv\Delta v in μm/h\mu\text{m/h}.

Answer

Δv=0.0800 μm/h\Delta v = 0.0800\,\mu\text{m/h}. Convert gradient: 4.00 bar/cm=0.400 bar/mm4.00\text{ bar/cm} = 0.400\text{ bar/mm}. Multiply: Δv=(2.00×10−4 mm2/(h⋅bar))×(0.400 bar/mm)=8.00×10−5 mm/h=0.0800 μm/h\Delta v = (2.00 \times 10^{-4}\text{ mm}^2/(\text{h}\cdot\text{bar})) \times (0.400\text{ bar/mm}) = 8.00 \times 10^{-5}\text{ mm/h} = 0.0800\,\mu\text{m/h}.

02

Soil matric potential changes linearly from −800 kPa-800\text{ kPa} to −200 kPa-200\text{ kPa} over a horizontal distance of 3.00 cm3.00\text{ cm}. A root tip has responsiveness Kw=1.50×10−4 mm2/(h⋅bar)K_w = 1.50 \times 10^{-4}\text{ mm}^2/(\text{h}\cdot\text{bar}). Given 1 bar=100 kPa1\text{ bar} = 100\text{ kPa}, determine: (a) the gradient in bar/mm\text{bar/mm}, and (b) Δv\Delta v in μm/h\mu\text{m/h}.

Answer

(a) 0.200 bar/mm0.200\text{ bar/mm}; (b) 0.0300 μm/h0.0300\,\mu\text{m/h}. Change in potential: ∣−2.00 bar−(−8.00 bar)∣=6.00 bar|-2.00\text{ bar} - (-8.00\text{ bar})| = 6.00\text{ bar}. Distance: 3.00 cm=30.0 mm3.00\text{ cm} = 30.0\text{ mm}. Gradient: 6.00 bar30.0 mm=0.200 bar/mm\frac{6.00\text{ bar}}{30.0\text{ mm}} = 0.200\text{ bar/mm}. Then Δv=(1.50×10−4)×0.200=3.00×10−5 mm/h=0.0300 μm/h\Delta v = (1.50 \times 10^{-4}) \times 0.200 = 3.00 \times 10^{-5}\text{ mm/h} = 0.0300\,\mu\text{m/h}.

03

An experimental mutant root exhibits differential elongation velocity Δv=0.0600 μm/h\Delta v = 0.0600\,\mu\text{m/h} when growing in a moisture gradient of 1.50 bar/cm1.50\text{ bar/cm}. Calculate the root's biological responsiveness constant KwK_w in units of mm2/(h⋅bar)\text{mm}^2/(\text{h}\cdot\text{bar}).

Answer

Kw=4.00×10−4 mm2/(h⋅bar)K_w = 4.00 \times 10^{-4}\text{ mm}^2/(\text{h}\cdot\text{bar}). Convert velocity: Δv=0.0600 μm/h=6.00×10−5 mm/h\Delta v = 0.0600\,\mu\text{m/h} = 6.00 \times 10^{-5}\text{ mm/h}. Convert gradient: 1.50 bar/cm=0.150 bar/mm1.50\text{ bar/cm} = 0.150\text{ bar/mm}. Solve: Kw=Δv∣dψm/dx∣=6.00×10−5 mm/h0.150 bar/mm=4.00×10−4 mm2/(h⋅bar)K_w = \frac{\Delta v}{|d\psi_m/dx|} = \frac{6.00 \times 10^{-5}\text{ mm/h}}{0.150\text{ bar/mm}} = 4.00 \times 10^{-4}\text{ mm}^2/(\text{h}\cdot\text{bar}).

Loading workspace…