Resources

An isolated red blood cell (erythrocyte) with an initial internal volume of 90.0 μm390.0\,\mu\text{m}^3 and an initial non-permeating internal osmolarity of 300 mOsm/L300\text{ mOsm/L} is placed into 1.0 mL1.0\text{ mL} of a solution containing 150 mM NaCl150\text{ mM }\text{NaCl} (which completely dissociates into Na+\text{Na}^+ and Cl−\text{Cl}^-, σNaCl=1.0\sigma_{\text{NaCl}} = 1.0) and 100 mM100\text{ mM} urea (a membrane-permeating solute with reflection coefficient σurea=0.0\sigma_{\text{urea}} = 0.0). Assuming the erythrocyte membrane behaves as an ideal osmometer where cell volume changes only in response to effective osmotic pressure across the selective barrier: (a) Calculate the initial effective osmolarity of the external solution Πeff, initial=∑σiCi\Pi_{\text{eff, initial}} = \sum \sigma_i C_i. (b) Calculate the final steady-state equilibrium volume of the erythrocyte (VfinalV_{\text{final}} in μm3\mu\text{m}^3) after urea reaches complete diffusion equilibrium across the plasma membrane.

Answer and steps

Final answer

(a) Initial effective osmolarity: Πeff, initial=(1.0)(300 mOsm/L)+(0.0)(100 mM)=300 mOsm/L\Pi_{\text{eff, initial}} = (1.0)(300\text{ mOsm/L}) + (0.0)(100\text{ mM}) = 300\text{ mOsm/L}; (b) Final equilibrium volume: Vfinal=90.0 μm3V_{\text{final}} = 90.0\,\mu\text{m}^3 (no net sustained change in volume because external non-permeating osmolarity equals internal non-permeating osmolarity).

Steps

Part (a): Calculating the Initial Effective Osmolarity

  1. Understand Osmolarity and the Reflection Coefficient (σ\sigma):

    • Total osmolarity measures the total number of solute particles per liter of solution.
    • Effective osmolarity (Πeff\Pi_{\text{eff}}), often termed tonicity, accounts for whether solutes can cross the plasma membrane. It is defined as: Πeff=∑σiCi\Pi_{\text{eff}} = \sum \sigma_i C_i where CiC_i is the osmolarity of solute ii and σi\sigma_i is its reflection coefficient.
    • A solute with σ=1.0\sigma = 1.0 is completely impermeable (non-penetrating), exerting full osmotic pressure.
    • A solute with σ=0.0\sigma = 0.0 is freely permeable (penetrating), exerting zero effective osmotic pressure across the membrane.
  2. Determine the Concentration of Each Solute:

    • NaCl\ce{NaCl} dissociates completely into NaX+\ce{Na+} and ClX−\ce{Cl-} ions: CNaCl=150 mM×2=300 mOsm/LC_{\ce{NaCl}} = 150\text{ mM} \times 2 = 300\text{ mOsm/L}
    • Urea does not dissociate: Curea=100 mM=100 mOsm/LC_{\text{urea}} = 100\text{ mM} = 100\text{ mOsm/L}
  3. Compute the Initial Effective Osmolarity: Πeff, initial=σNaClCNaCl+σureaCurea\Pi_{\text{eff, initial}} = \sigma_{\ce{NaCl}} C_{\ce{NaCl}} + \sigma_{\text{urea}} C_{\text{urea}} Πeff, initial=(1.0)(300 mOsm/L)+(0.0)(100 mOsm/L)=300 mOsm/L\Pi_{\text{eff, initial}} = (1.0)(300\text{ mOsm/L}) + (0.0)(100\text{ mOsm/L}) = 300\text{ mOsm/L}

Part (b): Determining the Final Equilibrium Volume (VfinalV_{\text{final}})

  1. Behavior of Permeating vs. Non-Permeating Solutes at Steady State:

    • Because urea is membrane-permeant (σurea=0.0\sigma_{\text{urea}} = 0.0), it diffuses down its chemical gradient into the red blood cell until its internal concentration equals the external concentration (100 mM100\text{ mM}).
    • Once urea equilibrates across the membrane, it exerts no transmembrane gradient and cannot drive net water flow at steady state.
  2. Equilibrium Governed by Non-Permeating Solutes:

    • At final osmotic equilibrium, water distributes so that the concentration of non-permeating solutes inside the cell equals the concentration of non-permeating solutes outside the cell: Cin, non-perm, final=Cout, non-permC_{\text{in, non-perm, final}} = C_{\text{out, non-perm}}
    • The volume of the external solution (1.0 mL=1.0×109 μm31.0\text{ mL} = 1.0 \times 10^9\,\mu\text{m}^3) is vast compared to a single cell (90.0 μm390.0\,\mu\text{m}^3), meaning the external non-permeating concentration remains fixed at 300 mOsm/L300\text{ mOsm/L}.
  3. Calculate Final Volume:

    • The total amount of internal non-permeating solute particles remains constant: nnon-perm=Cin, non-perm, initial⋅Vinitial=Cin, non-perm, final⋅Vfinaln_{\text{non-perm}} = C_{\text{in, non-perm, initial}} \cdot V_{\text{initial}} = C_{\text{in, non-perm, final}} \cdot V_{\text{final}}
    • Rearranging for VfinalV_{\text{final}}: Vfinal=Vinitial⋅Cin, non-perm, initialCout, non-permV_{\text{final}} = V_{\text{initial}} \cdot \frac{C_{\text{in, non-perm, initial}}}{C_{\text{out, non-perm}}} Vfinal=90.0 μm3⋅300 mOsm/L300 mOsm/L=90.0 μm3V_{\text{final}} = 90.0\,\mu\text{m}^3 \cdot \frac{300\text{ mOsm/L}}{300\text{ mOsm/L}} = 90.0\,\mu\text{m}^3

Key Pitfall: Do not use the total osmolarity of the external bath (300+100=400 mOsm/L300 + 100 = 400\text{ mOsm/L}) to calculate the final volume. While the bath is hyperosmotic, it is isotonic because the excess osmolarity comes entirely from the penetrating solute (urea). Penetrating solutes cause only transient fluid shifts; the final steady-state cell volume is determined solely by the balance of non-penetrating solutes.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student ignores the reflection coefficient of urea and treats it as an effective osmolyte in the initial solution, yielding 400 mOsm/L.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    CNaCl=2×150=300 mOsm/L  ⟹  Curea=100 mOsm/LC_{\text{NaCl}} = 2 \times 150 = 300\text{ mOsm/L} \implies C_{\text{urea}} = 100\text{ mOsm/L}

  2. Step 2

    Πeff, initial=300+100=400 mOsm/L\Pi_{\text{eff, initial}} = 300 + 100 = 400\text{ mOsm/L}

    Correct

    Πeff, initial=σNaClCNaCl+σureaCurea=(1.0)(300)+(0.0)(100)=300 mOsm/L\Pi_{\text{eff, initial}} = \sigma_{\text{NaCl}} C_{\text{NaCl}} + \sigma_{\text{urea}} C_{\text{urea}} = (1.0)(300) + (0.0)(100) = 300\text{ mOsm/L}

    You summed the total osmolarities directly rather than weighting each solute by its reflection coefficient σ\sigma. Because urea is freely permeating (σ=0.0\sigma = 0.0), it exerts zero effective osmotic pressure.

  3. Step 3

    At final steady-state, urea equilibrates across the membrane so only non-permeating NaCl dictates final volume.\text{At final steady-state, urea equilibrates across the membrane so only non-permeating NaCl dictates final volume.}   ⟹  \implies C_{ext, nonperm\text{ext, nonperm}} = 300 mOsm/L\text{ mOsm/L}   ⟹  \implies V_{final\text{final}} = 90.0 ×\times (300300)\left(\frac{300}{300}\right) = 90.0,\mu$$\text{m}^3$$

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the osmolarity of each solute in the external solution, accounting for ionic dissociation.

You correctly identified that permeating solutes equilibrate at steady state and leave the final cell volume dictated solely by non-permeating solutes.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confused total osmolarity with effective osmolarity

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You calculated the total bath osmolarity instead of applying the reflection coefficient formula given in the prompt (Πeff=∑σiCi\Pi_{\text{eff}} = \sum \sigma_i C_i). A completely permeating solute (σ=0.0\sigma = 0.0) crosses the membrane freely and cannot generate effective osmotic pressure.

REASONING PATH
Your ACEpath teacher’s suggested approach
Effective Osmolarity (Tonicity) Formula
  • Effective osmolarity requires weighting each solute by its reflection coefficient: Πeff=∑σiCi\Pi_{\text{eff}} = \sum \sigma_i C_i.

  • Always multiply solute concentrations by σi\sigma_i; if σ=0\sigma = 0, that solute contributes 0 mOsm/L0\text{ mOsm/L} to Πeff\Pi_{\text{eff}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute σNaCl=1.0\sigma_{\text{NaCl}} = 1.0 and CNaCl=300 mOsm/LC_{\text{NaCl}} = 300\text{ mOsm/L}.

  2. Substitute σurea=0.0\sigma_{\text{urea}} = 0.0 and Curea=100 mOsm/LC_{\text{urea}} = 100\text{ mOsm/L}.

  3. Πeff, initial=(1.0)(300)+(0.0)(100)=300 mOsm/L\Pi_{\text{eff, initial}} = (1.0)(300) + (0.0)(100) = 300\text{ mOsm/L}.

Final answer

(a) Πeff, initial=300 mOsm/L\Pi_{\text{eff, initial}} = 300\text{ mOsm/L}; (b) Vfinal=90.0 μm3V_{\text{final}} = 90.0\,\mu\text{m}^3

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the physical meaning of the reflection coefficient σ\sigma (ranging from 00 for completely penetrating solutes to 11 for completely non-penetrating solutes).

  • Practice differentiating between total osmolarity (a colligative property) and effective osmolarity/tonicity (a biological property dependent on membrane permeability).

OverviewACEpath Teacher's Diagnosis

02 The student treats urea as non-permeating at final equilibrium and adds external urea osmolarity to external NaCl osmolarity when calculating final cell volume, obtaining 67.5 μm³.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    CNaCl=2×150=300 mOsm/L  ⟹  Πeff, initial=1.0×300+0.0×100=300 mOsm/LC_{\text{NaCl}} = 2 \times 150 = 300\text{ mOsm/L} \implies \Pi_{\text{eff, initial}} = 1.0 \times 300 + 0.0 \times 100 = 300\text{ mOsm/L}

  2. Step 2

    Total external osmolarity=400 mOsm/L  ⟹  Vfinal=90.0×(300400)=67.5 μm3\text{Total external osmolarity} = 400\text{ mOsm/L} \implies V_{\text{final}} = 90.0 \times \left(\frac{300}{400}\right) = 67.5\,\mu\text{m}^3

    Correct

    Vfinal=Vinitial⋅Cin, non-perm, initialCout, non-perm=90.0 μm3⋅300 mOsm/L300 mOsm/L=90.0 μm3V_{\text{final}} = V_{\text{initial}} \cdot \frac{C_{\text{in, non-perm, initial}}}{C_{\text{out, non-perm}}} = 90.0\,\mu\text{m}^3 \cdot \frac{300\text{ mOsm/L}}{300\text{ mOsm/L}} = 90.0\,\mu\text{m}^3

    Urea is completely membrane-permeant (σ=0.0\sigma = 0.0), meaning it diffuses across the membrane until its internal and external concentrations are equal (100 mM100\text{ mM}). At steady-state diffusion equilibrium, urea exerts zero osmotic pressure difference across the membrane. Therefore, steady-state volume is determined exclusively by non-permeating solutes (extNaCl ext{NaCl}).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the dissociated osmolarity of NaCl\text{NaCl} as 300 mOsm/L300\text{ mOsm/L}.

You correctly used reflection coefficients to determine the initial effective osmolarity.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equating total osmolarity with tonicity at equilibrium

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the penetrating solute (urea) as permanently trapped outside the cell when calculating the final steady-state volume, confusing total osmolarity with effective osmolarity (tonicity) at equilibrium.

REASONING PATH
Your ACEpath teacher’s suggested approach
Permeant vs. Impermeant Solutes
  • A solute with σ=0\sigma = 0 diffuses down its concentration gradient until its internal concentration equals its external concentration.

  • Exclude fully permeant solutes when balancing transmembrane osmotic gradients at steady-state equilibrium.

Steady-State Cell Volume Rule
  • Vfinal=Vinitial⋅Cin, non-permCout, non-permV_{\text{final}} = V_{\text{initial}} \cdot \frac{C_{\text{in, non-perm}}}{C_{\text{out, non-perm}}}.

  • Use only non-permeating solute concentrations to find final steady-state volume.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify non-permeating solutes: only NaCl\text{NaCl} is non-permeating (σ=1.0\sigma = 1.0), so Cout, non-perm=300 mOsm/LC_{\text{out, non-perm}} = 300\text{ mOsm/L}.

  2. Recognize that urea equilibrates across the membrane ([urea]in=[urea]out=100 mM\text{[urea]}_{\text{in}} = \text{[urea]}_{\text{out}} = 100\text{ mM}), exerting no net osmotic force at steady state.

  3. Apply the conservation of intracellular non-permeating solutes: Vfinal=90.0 μm3×300 mOsm/L300 mOsm/L=90.0 μm3V_{\text{final}} = 90.0\,\mu\text{m}^3 \times \frac{300\text{ mOsm/L}}{300\text{ mOsm/L}} = 90.0\,\mu\text{m}^3.

Final answer

(a) Πeff, initial=300 mOsm/L\Pi_{\text{eff, initial}} = 300\text{ mOsm/L}; (b) Vfinal=90.0 μm3V_{\text{final}} = 90.0\,\mu\text{m}^3

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between osmolarity (total dissolved particles) and tonicity (effective osmotic pressure from non-penetrating particles).

  • Practice calculating cell volumes in solutions containing mixtures of penetrating solutes (like urea or glycerol) and non-penetrating solutes (like NaCl\text{NaCl} or sucrose).

OverviewACEpath Teacher's Diagnosis

03 The student forgets that NaCl dissociates into two ions (van 't Hoff factor i = 2), calculating external effective osmolarity as 150 mOsm/L and final volume as 180 μm³.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    CNaCl=150 mOsm/LC_{\text{NaCl}} = 150\text{ mOsm/L}

    Correct

    CNaCl=150 mM×2=300 mOsm/LC_{\text{NaCl}} = 150\text{ mM} \times 2 = 300\text{ mOsm/L}

    Because sodium chloride is a strong electrolyte that dissociates into NaX+\ce{Na+} and ClX−\ce{Cl-}, its van 't Hoff factor is i=2i = 2. Therefore, 150 mM NaCl150\text{ mM }\ce{NaCl} yields 300 mOsm/L300\text{ mOsm/L} of solute particles.

  2. Step 2

    Πeff, initial=1.0×150+0.0×100=150 mOsm/L\Pi_{\text{eff, initial}} = 1.0 \times 150 + 0.0 \times 100 = 150\text{ mOsm/L}

    Correct

    Πeff, initial=1.0×300 mOsm/L+0.0×100 mOsm/L=300 mOsm/L\Pi_{\text{eff, initial}} = 1.0 \times 300\text{ mOsm/L} + 0.0 \times 100\text{ mOsm/L} = 300\text{ mOsm/L}

    You correctly set up the effective osmolarity formula using the reflection coefficients σNaCl=1.0\sigma_{\text{NaCl}} = 1.0 and σurea=0.0\sigma_{\text{urea}} = 0.0. The numerical value was affected by using 150 mOsm/L150\text{ mOsm/L} instead of 300 mOsm/L300\text{ mOsm/L} for NaCl\ce{NaCl}.

  3. Step 3

    Urea equilibrates across the membrane and exerts no net effective osmotic pressure at equilibrium.

  4. Step 4

    Vfinal=90.0×(300150)=180 μm3V_{\text{final}} = 90.0 \times \left(\frac{300}{150}\right) = 180\text{ }\mu\text{m}^3

    Correct

    Vfinal=90.0 μm3×(300 mOsm/L300 mOsm/L)=90.0 μm3V_{\text{final}} = 90.0\text{ }\mu\text{m}^3 \times \left(\frac{300\text{ mOsm/L}}{300\text{ mOsm/L}}\right) = 90.0\text{ }\mu\text{m}^3

    Your dilution formula for final volume was set up logically, but substituting the incorrect external concentration (150 mOsm/L150\text{ mOsm/L} instead of 300 mOsm/L300\text{ mOsm/L}) caused you to calculate a doubled cell volume rather than no net change.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the reflection coefficient equation Πeff=∑σiCi\Pi_{\text{eff}} = \sum \sigma_i C_i to determine effective osmolarity.

You correctly understood that urea equilibrates fully across the membrane and produces no net osmotic driving force at steady state.

You correctly applied the inverse relationship between external non-permeating solute concentration and equilibrium cell volume.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Electrolyte Dissociation Factor Omission

You equated the molar concentration (150 mM150\text{ mM}) directly to osmolar concentration without multiplying by the dissociation factor i=2i = 2 for NaCl\ce{NaCl}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the distinction between molarity (moles of compound per liter) and osmolarity (osmoles of dissociated particles per liter) when working with ionic salts in physiological solutions.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Dissociation Factor (i)
  • For an electrolyte dissociating into nn ions, Osmolarity=i×Molarity\text{Osmolarity} = i \times \text{Molarity}. For fully dissociated NaCl\ce{NaCl}, i=2i = 2.

  • Always write out the dissociation equation (e.g., NaCl→NaX++ClX−\ce{NaCl -> Na+ + Cl-}) before calculating osmolarity.

Separate Penetrating vs. Non-Penetrating Solutes
  • Final cell volume at steady state depends exclusively on non-penetrating solutes (σ=1.0\sigma = 1.0), because penetrating solutes (σ=0\sigma = 0) distribute equally inside and outside.

  • Calculate the external non-penetrating osmolarity independently and compare it directly to internal non-penetrating osmolarity.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Account for dissociation: CNaCl=150 mM×2=300 mOsm/LC_{\ce{NaCl}} = 150\text{ mM} \times 2 = 300\text{ mOsm/L}.

  2. Calculate initial effective osmolarity: Πeff, initial=(1.0)(300 mOsm/L)+(0.0)(100 mOsm/L)=300 mOsm/L\Pi_{\text{eff, initial}} = (1.0)(300\text{ mOsm/L}) + (0.0)(100\text{ mOsm/L}) = 300\text{ mOsm/L}.

  3. Apply non-permeating solute balance at equilibrium: Vfinal=Vinitial×Cin, non-permCout, non-perm=90.0 μm3×300 mOsm/L300 mOsm/L=90.0 μm3V_{\text{final}} = V_{\text{initial}} \times \frac{C_{\text{in, non-perm}}}{C_{\text{out, non-perm}}} = 90.0\text{ }\mu\text{m}^3 \times \frac{300\text{ mOsm/L}}{300\text{ mOsm/L}} = 90.0\text{ }\mu\text{m}^3.

Final answer

(a) Πeff, initial=300 mOsm/L\Pi_{\text{eff, initial}} = 300\text{ mOsm/L}; (b) Vfinal=90.0 μm3V_{\text{final}} = 90.0\text{ }\mu\text{m}^3

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting molarity to osmolarity for salts with different stoichiometric coefficients, such as CaClX2\ce{CaCl2} (i=3i = 3) and NaX2SOX4\ce{Na2SO4} (i=3i = 3).

  • Review the physiological distinction between hyperosmotic and hypertonic solutions when penetrating solutes are present.

Lock it in

Similar question

01

A red blood cell with internal non-permeating osmolarity of 290 mOsm/L290\text{ mOsm/L} is placed into a solution containing 100 mM CaCl2100\text{ mM }\text{CaCl}_2 (fully dissociates, σ=1.0\sigma = 1.0) and 80 mM80\text{ mM} ethanol (membrane-permeant, σ=0.0\sigma = 0.0). Calculate the initial effective osmolarity of this solution.

Answer

300 mOsm/L300\text{ mOsm/L}. Dissociation of CaCl2\text{CaCl}_2 gives 100 mM×3=300 mOsm/L100\text{ mM} \times 3 = 300\text{ mOsm/L}. With σethanol=0.0\sigma_{\text{ethanol}} = 0.0, Πeff=(1.0)(300)+(0.0)(80)=300 mOsm/L\Pi_{\text{eff}} = (1.0)(300) + (0.0)(80) = 300\text{ mOsm/L}.

02

An erythrocyte (V0=95.0 μm3V_0 = 95.0\,\mu\text{m}^3, internal non-permeating osmolarity 300 mOsm/L300\text{ mOsm/L}) is placed into a large volume of solution containing 100 mM NaCl100\text{ mM }\text{NaCl} (completely dissociates, σ=1.0\sigma = 1.0) and 150 mM150\text{ mM} urea (permeant, σ=0.0\sigma = 0.0). Calculate the final steady-state volume (VfinalV_{\text{final}}) of the erythrocyte.

Answer

142.5 μm3142.5\,\mu\text{m}^3. External non-permeating concentration is Cext, nonperm=2×100=200 mOsm/LC_{\text{ext, nonperm}} = 2 \times 100 = 200\text{ mOsm/L}. At steady state, urea equilibrates, so Vfinal=V0⋅(Cin, nonperm/Cext, nonperm)=95.0×(300/200)=142.5 μm3V_{\text{final}} = V_0 \cdot (C_{\text{in, nonperm}} / C_{\text{ext, nonperm}}) = 95.0 \times (300 / 200) = 142.5\,\mu\text{m}^3.

03

A cell with an initial volume of 100 μm3100\,\mu\text{m}^3 and internal non-penetrating solute concentration of 300 mOsm/L300\text{ mOsm/L} is placed into an external bath containing a non-penetrating solute AA (CA=200 mOsm/LC_A = 200\text{ mOsm/L}, σA=1.0\sigma_A = 1.0) and a slowly penetrating solute BB (CB=200 mOsm/LC_B = 200\text{ mOsm/L}, σB=0.5\sigma_B = 0.5). Calculate the effective osmolarity immediately upon immersion, and state whether the cell initially shrinks, swells, or maintains volume.

Answer

Πeff, initial=300 mOsm/L\Pi_{\text{eff, initial}} = 300\text{ mOsm/L}; the cell initially maintains volume. Calculation: Πeff=(1.0)(200)+(0.5)(200)=200+100=300 mOsm/L\Pi_{\text{eff}} = (1.0)(200) + (0.5)(200) = 200 + 100 = 300\text{ mOsm/L}. Since internal effective osmolarity (300 mOsm/L300\text{ mOsm/L}) equals external effective osmolarity (300 mOsm/L300\text{ mOsm/L}), initial net water flux is zero.

Loading workspace…