Resources

A purified bacterial catalase operates at 25∘C25^\circ\text{C} and pH 7.0\text{pH } 7.0 with Km=25.0 mMK_m = 25.0\text{ mM} for hydrogen peroxide. Determine the substrate concentration [S][S] (in mM\text{mM}) required to achieve an initial reaction velocity v0v_0 that is exactly 80.0%80.0\% of its maximum velocity Vmax⁡V_{\max}.

Answer and steps

Final answer

[S]=100 mM[S] = 100\text{ mM}

Steps

01

Identify the Governing Relationship

The rate of an enzyme-catalyzed reaction following hyperbolic saturation kinetics is modeled by the Michaelis-Menten equation:

v0=Vmax⁡[S]Km+[S]v_0 = \frac{V_{\max}[S]}{K_m + [S]}

where:

  • v0v_0 is the initial reaction velocity,
  • Vmax⁡V_{\max} is the maximum possible reaction velocity,
  • [S][S] is the substrate concentration,
  • KmK_m is the Michaelis constant (the substrate concentration at which v0=12Vmax⁡v_0 = \frac{1}{2}V_{\max}).

02

Relate the Given Velocity to Vmax⁡V_{\max}

We are asked to find [S][S] when the reaction reaches 80.0%80.0\% of its maximal velocity:

v0=0.800⋅Vmax⁡v_0 = 0.800 \cdot V_{\max}

Substitute this value into the Michaelis-Menten equation:

0.800⋅Vmax⁡=Vmax⁡[S]Km+[S]0.800 \cdot V_{\max} = \frac{V_{\max}[S]}{K_m + [S]}


03

Solve for [S][S] in Terms of KmK_m

Divide both sides by Vmax⁡V_{\max} (assuming Vmax⁡≠0V_{\max} \neq 0):

0.800=[S]Km+[S]0.800 = \frac{[S]}{K_m + [S]}

Multiply both sides by (Km+[S])(K_m + [S]):

0.800(Km+[S])=[S]0.800(K_m + [S]) = [S]

0.800 Km+0.800[S]=[S]0.800\,K_m + 0.800[S] = [S]

Subtract 0.800[S]0.800[S] from both sides:

0.800 Km=0.200[S]0.800\,K_m = 0.200[S]

Isolate [S][S]:

[S]=0.8000.200 Km=4 Km[S] = \frac{0.800}{0.200}\,K_m = 4\,K_m


04

Calculate the Numerical Value

Given that Km=25.0 mMK_m = 25.0\text{ mM}:

[S]=4⋅25.0 mM=100 mM[S] = 4 \cdot 25.0\text{ mM} = 100\text{ mM}

Common Pitfall: Do not confuse the percentage of Vmax⁡V_{\max} with a linear increase in substrate concentration. Because the enzyme approaches saturation asymptotically, raising the velocity from 50%50\% to 80%80\% of Vmax⁡V_{\max} requires quadrupling the substrate concentration from 1 Km1\,K_m to 4 Km4\,K_m, rather than simply increasing it by 30%30\%.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the fraction of V_max achieved with the fraction of K_m, setting [S] directly equal to 0.800 K_m instead of solving the Michaelis-Menten equation, resulting in [S] = 20.0 mM.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v0=0.80 Vmax⁡v_0 = 0.80\,V_{\max}

  2. Step 2

    [S]=0.80 Km[S] = 0.80\,K_m

    Correct

    0.800 Vmax⁡=Vmax⁡[S]Km+[S]  ⟹  [S]=4 Km0.800\,V_{\max} = \frac{V_{\max}[S]}{K_m + [S]} \implies [S] = 4\,K_m

    You treated [S][S] as being directly proportional to KmK_m by setting [S]=0.80 Km[S] = 0.80\,K_m. Because enzyme saturation kinetics follow the non-linear Michaelis-Menten curve, reaching 80%80\% of Vmax⁡V_{\max} actually requires [S]=0.801−0.80 Km=4 Km[S] = \frac{0.80}{1 - 0.80}\,K_m = 4\,K_m.

  3. Step 3

    [S]=0.80×25.0 mM=20.0 mM[S] = 0.80 \times 25.0\text{ mM} = 20.0\text{ mM}

    Correct

    [S]=4×25.0 mM=100 mM[S] = 4 \times 25.0\text{ mM} = 100\text{ mM}

    Your arithmetic evaluation followed correctly from your formula in Step 2, but the resulting concentration is incorrect due to the initial algebraic error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly translated the given condition of 80.0%80.0\% maximal velocity into v0=0.80 Vmax⁡v_0 = 0.80\,V_{\max}.

You performed the multiplication correctly based on your written equation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Linear scaling assumption for non-linear saturation kinetics

You set [S]=0.80 Km[S] = 0.80\,K_m instead of substituting v0=0.80 Vmax⁡v_0 = 0.80\,V_{\max} into the Michaelis-Menten equation.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated enzyme velocity as a linear function of substrate concentration scaled by KmK_m. In reality, KmK_m represents the substrate concentration at 50%50\% of Vmax⁡V_{\max}, and velocity approaches Vmax⁡V_{\max} along a hyperbolic curve described by v0=Vmax⁡[S]Km+[S]v_0 = \frac{V_{\max}[S]}{K_m + [S]}, requiring much higher substrate concentrations to reach higher fractions of Vmax⁡V_{\max}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Recall the Definition of $K_m$
  • KmK_m is the substrate concentration [S][S] at which v0=0.50 Vmax⁡v_0 = 0.50\,V_{\max}, not the substrate concentration at Vmax⁡V_{\max}.

  • Check whether your calculated [S][S] makes sense relative to KmK_m: reaching 80%80\% of Vmax⁡V_{\max} must require [S]>Km[S] > K_m, so an answer of 20.0 mM20.0\text{ mM} (which is less than Km=25.0 mMK_m = 25.0\text{ mM}) is physically impossible.

Use the Ratio Form of Michaelis-Menten
  • When given v0=f⋅Vmax⁡v_0 = f \cdot V_{\max} where 0<f<10 < f < 1, the relation is f=[S]Km+[S]f = \frac{[S]}{K_m + [S]}, which rearranges to [S]=f1−f Km[S] = \frac{f}{1 - f}\,K_m.

  • Always substitute v0v_0 into the full Michaelis-Menten rate equation or use the rearranged formula [S]=f1−f Km[S] = \frac{f}{1 - f}\,K_m when determining the substrate concentration for a target fraction of Vmax⁡V_{\max}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute v0=0.800 Vmax⁡v_0 = 0.800\,V_{\max} into the Michaelis-Menten equation: 0.800 Vmax⁡=Vmax⁡[S]Km+[S]0.800\,V_{\max} = \frac{V_{\max}[S]}{K_m + [S]}.

  2. Divide both sides by Vmax⁡V_{\max}: 0.800=[S]Km+[S]0.800 = \frac{[S]}{K_m + [S]}.

  3. Rearrange to solve for [S][S]: 0.800(Km+[S])=[S]  ⟹  0.800 Km=0.200[S]  ⟹  [S]=4 Km0.800(K_m + [S]) = [S] \implies 0.800\,K_m = 0.200[S] \implies [S] = 4\,K_m.

  4. Substitute Km=25.0 mMK_m = 25.0\text{ mM}: [S]=4×25.0 mM=100 mM[S] = 4 \times 25.0\text{ mM} = 100\text{ mM}.

Final answer

[S]=100 mM[S] = 100\text{ mM}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice solving for [S][S] when v0v_0 is given as various percentages of Vmax⁡V_{\max} (e.g., 50%50\%, 75%75\%, 90%90\%).

  • Verify your answers qualitatively: if the desired velocity is greater than 0.50 Vmax⁡0.50\,V_{\max}, the required [S][S] must always be strictly greater than KmK_m.

OverviewACEpath Teacher's Diagnosis

02 The student inverts the velocity ratio during algebraic rearrangement of the Michaelis-Menten equation, leading to [S] = 0.25 K_m and an incorrect substrate concentration of 6.25 mM.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    V0=Vmax⁡[S]Km+[S]  ⟹  0.80=[S]25.0+[S]V_0 = \frac{V_{\max}[S]}{K_m + [S]} \implies 0.80 = \frac{[S]}{25.0 + [S]}

  2. Step 2

    0.80×25.0+0.80[S]=[S]  ⟹  20.0=0.20[S]0.80 \times 25.0 + 0.80[S] = [S] \implies 20.0 = 0.20[S]

  3. Step 3

    [S]=0.200.80×25.0=6.25 mM[S] = \frac{0.20}{0.80} \times 25.0 = 6.25\text{ mM}

    Correct

    [S]=20.00.20=100 mM[S] = \frac{20.0}{0.20} = 100\text{ mM}

    You inverted the division when isolating [S][S]. From 20.0=0.20[S]20.0 = 0.20[S], dividing both sides by 0.200.20 gives [S]=20.00.20=100 mM[S] = \frac{20.0}{0.20} = 100\text{ mM} (or [S]=0.800.20×25.0=4×25.0=100 mM[S] = \frac{0.80}{0.20} \times 25.0 = 4 \times 25.0 = 100\text{ mM}).

WHAT YOU DID WELL
Compliments from Your Teacher

You chose the correct Michaelis-Menten rate equation.

You substituted the fractional velocity 0.80Vmax⁡0.80V_{\max} and Michaelis constant Km=25.0 mMK_m = 25.0\text{ mM} correctly.

You expanded and collected linear terms in [S][S] accurately up to 20.0=0.20[S]20.0 = 0.20[S].

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
algebraic inversion error

You divided the coefficient of [S][S] by the constant term instead of dividing the constant term by the coefficient of [S][S].

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Inverting the ratio when isolating a variable in a=b[S]a = b[S], compounded by missing a biological sanity check: because v0=0.80Vmax⁡>0.50Vmax⁡v_0 = 0.80V_{\max} > 0.50V_{\max}, the required substrate concentration must be strictly greater than KmK_m ([S]>25.0 mM[S] > 25.0\text{ mM}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Isolating the Unknown
  • For an equation c=a[S]c = a[S], divide both sides by the coefficient of [S][S]: [S]=ca[S] = \frac{c}{a}.

  • Divide 20.020.0 by 0.200.20 to obtain [S]=100 mM[S] = 100\text{ mM}, rather than computing 0.2020.0\frac{0.20}{20.0} or 0.200.80×Km\frac{0.20}{0.80} \times K_m.

Biological Sanity Check
  • By definition, v0=0.50Vmax⁡v_0 = 0.50V_{\max} when [S]=Km[S] = K_m. Any velocity greater than 50%Vmax⁡50\% V_{\max} requires [S]>Km[S] > K_m.

  • Check whether your result exceeds Km=25.0 mMK_m = 25.0\text{ mM}. A value of 6.25 mM6.25\text{ mM} is below KmK_m, signaling that an algebraic inversion occurred.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Divide both sides by 0.200.20: [S]=20.00.20[S] = \frac{20.0}{0.20}

  2. Simplify the fraction: [S]=100 mM[S] = 100\text{ mM}

Final answer

[S]=100 mM[S] = 100\text{ mM}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice isolating variables of the form f⋅Km=(1−f)[S]f \cdot K_m = (1 - f)[S] to reinforce that [S]=f1−fKm[S] = \frac{f}{1 - f}K_m.

  • Always apply the KmK_m benchmark ([S]=Km[S] = K_m at 50%Vmax⁡50\% V_{\max}) as a quick qualitative sanity check on your final concentration.

OverviewACEpath Teacher's Diagnosis

03 The student misinterprets 80.0% of V_max as setting the denominator to 0.800 K_m or omitting the [S] term in the denominator (linear approximation v₀ = V_max [S] / K_m), yielding [S] = 20.0 mM.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    0.80=[S]Km+[S]0.80 = \frac{[S]}{K_m + [S]}

  2. Step 2

    0.80Km+[S]=[S]0.80 K_m + [S] = [S]

    Correct

    0.80(Km+[S])=[S]  ⟹  0.80Km+0.80[S]=[S]0.80(K_m + [S]) = [S] \implies 0.80 K_m + 0.80[S] = [S]

    When multiplying both sides by (Km+[S])(K_m + [S]), remember to distribute the factor 0.800.80 across both terms: 0.80(Km+[S])=0.80Km+0.80[S]0.80(K_m + [S]) = 0.80 K_m + 0.80[S].

  3. Step 3

    0.80Km=[S]−0.80  ⟹  0.80(25.0)=0.80[S]0.80 K_m = [S] - 0.80 \implies 0.80(25.0) = 0.80[S]

    Correct

    0.80Km=[S]−0.80[S]  ⟹  0.80Km=0.20[S]  ⟹  [S]=4Km0.80 K_m = [S] - 0.80[S] \implies 0.80 K_m = 0.20[S] \implies [S] = 4 K_m

    Carrying through the distributed equation allows you to combine like terms for [S][S]: 0.80Km=(1−0.80)[S]=0.20[S]0.80 K_m = (1 - 0.80)[S] = 0.20[S].

  4. Step 4

    [S]=25.0 mM[S] = 25.0\text{ mM}

    Correct

    [S]=4(25.0 mM)=100 mM[S] = 4(25.0\text{ mM}) = 100\text{ mM}

    Multiplying the Michaelis constant Km=25.0 mMK_m = 25.0\text{ mM} by 44 gives the correct substrate concentration of 100 mM100\text{ mM}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the Michaelis-Menten rate equation.

You set the initial velocity ratio to 0.800.80 correctly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Distributive property error during algebraic rearrangement

You dropped the coefficient 0.800.80 when multiplying it by [S][S] in the numerator clearance step.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Failing to place parentheses around the binomial denominator (Km+[S])(K_m + [S]) when clearing fractions led to an incomplete distribution, disrupting the balance of like terms.

REASONING PATH
Your ACEpath teacher’s suggested approach
Use grouping parentheses
  • Whenever clearing a multi-term denominator such as (Km+[S])(K_m + [S]), always write explicit parentheses around the sum before multiplying.

  • Write f⋅(Km+[S])f \cdot (K_m + [S]) and expand to f⋅Km+f⋅[S]f \cdot K_m + f \cdot [S] before isolating terms.

Biological sense check
  • At [S]=Km[S] = K_m, an enzyme operates at exactly 50% Vmax⁡50\%\,V_{\max}.

  • Since 80%>50%80\% > 50\%, the required substrate concentration must be strictly greater than KmK_m (25.0 mM25.0\text{ mM}).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Multiply both sides by (Km+[S])(K_m + [S]): 0.80(Km+[S])=[S]0.80(K_m + [S]) = [S]

  2. Distribute 0.800.80: 0.80Km+0.80[S]=[S]0.80 K_m + 0.80[S] = [S]

  3. Subtract 0.80[S]0.80[S] from both sides: 0.80Km=0.20[S]0.80 K_m = 0.20[S]

  4. Isolate [S][S]: [S]=0.800.20Km=4Km[S] = \frac{0.80}{0.20} K_m = 4 K_m

  5. Substitute Km=25.0 mMK_m = 25.0\text{ mM}: [S]=4×25.0 mM=100 mM[S] = 4 \times 25.0\text{ mM} = 100\text{ mM}

Final answer

[S]=100 mM[S] = 100\text{ mM}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice expressing [S][S] as a multiple of KmK_m for standard percentage velocities (50%50\%, 75%75\%, 90%90\%).

  • Always perform a quick sanity check: verify whether your final [S][S] is greater than KmK_m whenever v0>0.50Vmax⁡v_0 > 0.50 V_{\max}.

Lock it in

Similar question

01

A hexokinase enzyme has a KmK_m of 0.15 mM0.15\text{ mM} for glucose. What substrate concentration is needed for the enzyme to operate at 25.0%25.0\% of its Vmax⁡V_{\max}?

Answer

[S]=0.050 mM[S] = 0.050\text{ mM}. Key steps: set 0.25=[S]Km+[S]0.25 = \frac{[S]}{K_m + [S]}, yielding [S]=0.251−0.25 Km=13Km[S] = \frac{0.25}{1 - 0.25}\,K_m = \frac{1}{3}K_m. Then calculate [S]=13(0.15 mM)=0.050 mM[S] = \frac{1}{3}(0.15\text{ mM}) = 0.050\text{ mM}.

02

An industrial lactase operates with Km=12.0 mMK_m = 12.0\text{ mM} for lactose. Calculate the substrate concentration required to achieve v0=0.75 Vmax⁡v_0 = 0.75\,V_{\max}, and compare this value to KmK_m.

Answer

[S]=36.0 mM[S] = 36.0\text{ mM}, which is exactly 3 Km3\,K_m. Key steps: set 0.75 Vmax⁡=Vmax⁡[S]Km+[S]0.75\,V_{\max} = \frac{V_{\max}[S]}{K_m + [S]}, so [S]=0.750.25 Km=3 Km[S] = \frac{0.75}{0.25}\,K_m = 3\,K_m. With Km=12.0 mMK_m = 12.0\text{ mM}, [S]=3×12.0 mM=36.0 mM[S] = 3 \times 12.0\text{ mM} = 36.0\text{ mM}.

03

An enzyme-catalyzed reaction currently operates at v0=0.50 Vmax⁡v_0 = 0.50\,V_{\max} with Km=8.0 mMK_m = 8.0\text{ mM}. By what factor must the substrate concentration be multiplied to increase the velocity from 50.0%50.0\% to 80.0%80.0\% of Vmax⁡V_{\max}?

Answer

The substrate concentration must be multiplied by a factor of 44 (increased from 8.0 mM8.0\text{ mM} to 32.0 mM32.0\text{ mM}). Key steps: at 50.0% Vmax⁡50.0\%\,V_{\max}, [S]1=Km=8.0 mM[S]_1 = K_m = 8.0\text{ mM}. At 80.0% Vmax⁡80.0\%\,V_{\max}, [S]2=0.801−0.80 Km=4 Km=32.0 mM[S]_2 = \frac{0.80}{1 - 0.80}\,K_m = 4\,K_m = 32.0\text{ mM}. The factor is [S]2[S]1=4 KmKm=4\frac{[S]_2}{[S]_1} = \frac{4\,K_m}{K_m} = 4.

Loading workspace…