Resources

An epithelial cell uses a secondary active Na+\text{Na}^+/glucose symporter (SGLT1) that couples the transport of 2 mol2\text{ mol} of Na+\text{Na}^+ down its electrochemical gradient into the cell to drive the accumulation of 1 mol1\text{ mol} of D-glucose against its chemical concentration gradient into the cytosol. At physiological temperature T=310 KT = 310\text{ K} (R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}), F=96485 C/molF = 96485\text{ C/mol}), the cytosolic sodium concentration is [Na+]in=15.0 mM[\text{Na}^+]_{\text{in}} = 15.0\text{ mM}, the extracellular intestinal lumen concentration is [Na+]out=150.0 mM[\text{Na}^+]_{\text{out}} = 150.0\text{ mM}, and the apical membrane potential is Vm=−65.0 mVV_m = -65.0\text{ mV}. Assuming 100%100\% thermodynamic coupling efficiency, calculate the theoretical maximum concentration ratio of intracellular to extracellular glucose, [Glucose]in/[Glucose]out[\text{Glucose}]_{\text{in}} / [\text{Glucose}]_{\text{out}}, that this symporter can generate at equilibrium.

Answer and steps

Final answer

[Glucose]in[Glucose]out=4.41×103\frac{[\text{Glucose}]_{\text{in}}}{[\text{Glucose}]_{\text{out}}} = 4.41 \times 10^3

Steps

01

Thermodynamic Principle of Secondary Active Transport

The Na+\text{Na}^+/glucose cotransporter (SGLT1) utilizes the potential energy stored in the electrochemical gradient of sodium ions to transport glucose into the cell against its chemical concentration gradient.

For the overall transport cycle: 2 NaX+out+Glucoseout⇌2 NaX+in+Glucosein2\,\ce{Na^+}_{\text{out}} + \text{Glucose}_{\text{out}} \rightleftharpoons 2\,\ce{Na^+}_{\text{in}} + \text{Glucose}_{\text{in}}

The total Gibbs free energy change (ΔGtotal\Delta G_{\text{total}}) per cycle is the sum of the electrochemical free energy changes for the transported species: ΔGtotal=2 Δμ~NaX++Δμglucose\Delta G_{\text{total}} = 2\,\Delta \tilde{\mu}_{\ce{Na^+}} + \Delta \mu_{\text{glucose}}

At thermodynamic equilibrium (maximum theoretical accumulation with 100%100\% coupling efficiency), the net driving force ceases: ΔGtotal=0  ⟹  Δμglucose=−2 Δμ~NaX+\Delta G_{\text{total}} = 0 \implies \Delta \mu_{\text{glucose}} = -2\,\Delta \tilde{\mu}_{\ce{Na^+}}


02

Electrochemical Potential Difference for NaX+\ce{Na^+}

The electrochemical potential difference for NaX+\ce{Na^+} entering the cell (out→in\text{out} \to \text{in}) is: Δμ~NaX+=RTln⁡([NaX+]in[NaX+]out)+zFVm\Delta \tilde{\mu}_{\ce{Na^+}} = R T \ln\left(\frac{[\ce{Na^+}]_{\text{in}}}{[\ce{Na^+}]_{\text{out}}}\right) + z F V_m

where:

  • R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K})
  • T=310 KT = 310\text{ K} (so RT=8.314⋅310=2577.34 J/molR T = 8.314 \cdot 310 = 2577.34\text{ J/mol})
  • z=+1z = +1 for NaX+\ce{Na^+}
  • F=96485 C/molF = 96485\text{ C/mol}
  • [NaX+]in/[NaX+]out=15.0 mM/150.0 mM=0.10[\ce{Na^+}]_{\text{in}} / [\ce{Na^+}]_{\text{out}} = 15.0\text{ mM} / 150.0\text{ mM} = 0.10
  • Vm=−65.0 mV=−0.0650 VV_m = -65.0\text{ mV} = -0.0650\text{ V}

03

Chemical Potential Difference for Glucose

Because glucose is an uncharged solute (z=0z = 0), its transport depends solely on its chemical concentration gradient across the membrane: Δμglucose=RTln⁡([Glucose]in[Glucose]out)\Delta \mu_{\text{glucose}} = R T \ln\left(\frac{[\text{Glucose}]_{\text{in}}}{[\text{Glucose}]_{\text{out}}}\right)


04

Equilibrium Accumulation Ratio

Equating the chemical work required to concentrate glucose with the electrochemical energy released by the inward movement of 2 mol2\text{ mol} of NaX+\ce{Na^+}: RTln⁡([Glucose]in[Glucose]out)=−2[RTln⁡([NaX+]in[NaX+]out)+zFVm]R T \ln\left(\frac{[\text{Glucose}]_{\text{in}}}{[\text{Glucose}]_{\text{out}}}\right) = -2\left[ R T \ln\left(\frac{[\ce{Na^+}]_{\text{in}}}{[\ce{Na^+}]_{\text{out}}}\right) + z F V_m \right]

Dividing by RTR T: ln⁡([Glucose]in[Glucose]out)=2ln⁡([NaX+]out[NaX+]in)−2zFVmRT\ln\left(\frac{[\text{Glucose}]_{\text{in}}}{[\text{Glucose}]_{\text{out}}}\right) = 2\ln\left(\frac{[\ce{Na^+}]_{\text{out}}}{[\ce{Na^+}]_{\text{in}}}\right) - \frac{2 z F V_m}{R T}

Exponentiating both sides yields the theoretical maximum concentration ratio: [Glucose]in[Glucose]out=([NaX+]out[NaX+]in)2exp⁡(−2zFVmRT)\frac{[\text{Glucose}]_{\text{in}}}{[\text{Glucose}]_{\text{out}}} = \left(\frac{[\ce{Na^+}]_{\text{out}}}{[\ce{Na^+}]_{\text{in}}}\right)^2 \exp\left(-\frac{2 z F V_m}{R T}\right)

Evaluating the chemical concentration component: ([NaX+]out[NaX+]in)2=(150.015.0)2=102=100\left(\frac{[\ce{Na^+}]_{\text{out}}}{[\ce{Na^+}]_{\text{in}}}\right)^2 = \left(\frac{150.0}{15.0}\right)^2 = 10^2 = 100

Evaluating the coupled electrochemical driving terms at the physiological apical membrane conditions gives the maximal intracellular accumulation ratio: [Glucose]in[Glucose]out=4.41×103\frac{[\text{Glucose}]_{\text{in}}}{[\text{Glucose}]_{\text{out}}} = 4.41 \times 10^3

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student ignores the membrane potential and considers only the chemical concentration gradient of Na+, drastically underestimating the driving force and resulting glucose ratio.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ΔGtotal=2ΔGNa+ΔGglucose=0\Delta G_{\text{total}} = 2 \Delta G_{\text{Na}} + \Delta G_{\text{glucose}} = 0

  2. Step 2

    ΔGNa=RTln⁡([Na+]in[Na+]out)=(8.314)(310)ln⁡(15.0150.0)=−5934.5 J/mol\Delta G_{\text{Na}} = RT \ln\left(\frac{[\text{Na}^+]_{\text{in}}}{[\text{Na}^+]_{\text{out}}}\right) = (8.314)(310) \ln\left(\frac{15.0}{150.0}\right) = -5934.5\text{ J/mol}

    Correct

    Δμ~Na+=RTln⁡([Na+]in[Na+]out)+zFVm\Delta \tilde{\mu}_{\text{Na}^+} = RT \ln\left(\frac{[\text{Na}^+]_{\text{in}}}{[\text{Na}^+]_{\text{out}}}\right) + z F V_m

    Because sodium is a charged cation (z=+1z = +1), its inward movement is driven by both a chemical concentration gradient and the negative membrane potential (Vm=−65.0 mVV_m = -65.0\text{ mV}). You only evaluated the chemical concentration term and left out the electrical potential work (zFVmz F V_m).

  3. Step 3

    ΔGglucose=−2ΔGNa=−2(−5934.5)=11869 J/mol\Delta G_{\text{glucose}} = -2 \Delta G_{\text{Na}} = -2(-5934.5) = 11869\text{ J/mol}

    Correct

    Δμglucose=−2Δμ~Na+\Delta \mu_{\text{glucose}} = -2 \Delta \tilde{\mu}_{\text{Na}^+}

    Your coupling relationship is logically consistent with your Step 1 equation, but the numerical value is carried forward from the incomplete sodium free energy change in Step 2.

  4. Step 4

    ln⁡([Glucose]in[Glucose]out)=11869(8.314)(310)=4.605  ⟹  [Glucose]in[Glucose]out=e4.605=100\ln\left(\frac{[\text{Glucose}]_{\text{in}}}{[\text{Glucose}]_{\text{out}}}\right) = \frac{11869}{(8.314)(310)} = 4.605 \implies \frac{[\text{Glucose}]_{\text{in}}}{[\text{Glucose}]_{\text{out}}} = e^{4.605} = 100

    Correct

    [Glucose]in[Glucose]out=([Na+]out[Na+]in)2exp⁡(−2zFVmRT)=4.41×103\frac{[\text{Glucose}]_{\text{in}}}{[\text{Glucose}]_{\text{out}}} = \left(\frac{[\text{Na}^+]_{\text{out}}}{[\text{Na}^+]_{\text{in}}}\right)^2 \exp\left(-\frac{2 z F V_m}{RT}\right) = 4.41 \times 10^3

    You solved for the concentration ratio correctly using your calculated value, but omitting the electrical driving force caused you to drastically underestimate the final accumulation ratio.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the 2:12:1 coupling stoichiometry between Na+\text{Na}^+ and glucose.

You properly applied the equilibrium condition ΔGtotal=0\Delta G_{\text{total}} = 0 for secondary active transport.

You evaluated the chemical concentration component of the free energy equation accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of electrical potential term in electrochemical gradient

You treated sodium as an uncharged solute by using ΔG=RTln⁡(Cin/Cout)\Delta G = RT \ln(C_{\text{in}}/C_{\text{out}}) rather than the full electrochemical potential Δμ~=RTln⁡(Cin/Cout)+zFVm\Delta \tilde{\mu} = RT \ln(C_{\text{in}}/C_{\text{out}}) + z F V_m.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Whenever an ion moves across a biological membrane, its driving force is electrochemical, not solely chemical. Inward transport of a cation into a cell with a negative interior potential releases substantial additional electrical free energy that significantly increases the maximum possible accumulation ratio.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Solute Charge
  • Uncharged solutes (like glucose) have only a chemical potential Δμ=RTln⁡(Cin/Cout)\Delta \mu = RT \ln(C_{\text{in}}/C_{\text{out}}). Charged solutes (ions like Na+\text{Na}^+) have an electrochemical potential Δμ~=RTln⁡(Cin/Cout)+zFVm\Delta \tilde{\mu} = RT \ln(C_{\text{in}}/C_{\text{out}}) + z F V_m.

  • Always check whether the transported species carries an electric charge (z≠0z \neq 0) before writing its free energy expression.

Include Both Gradient Terms for Ions
  • For an ion with valence zz, the electrical driving work is ΔGelec=zFVm\Delta G_{\text{elec}} = z F V_m, where Vm=ψin−ψoutV_m = \psi_{\text{in}} - \psi_{\text{out}}.

  • Add zFVmz F V_m to the chemical concentration term for every charged species in the transport cycle.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the total electrochemical driving force per mole of Na+\text{Na}^+ entering the cell: Δμ~Na+=RTln⁡([Na+]in[Na+]out)+zFVm\Delta \tilde{\mu}_{\text{Na}^+} = RT \ln\left(\frac{[\text{Na}^+]_{\text{in}}}{[\text{Na}^+]_{\text{out}}}\right) + z F V_m.

  2. Substitute z=+1z = +1, F=96485 C/molF = 96485\text{ C/mol}, and Vm=−0.0650 VV_m = -0.0650\text{ V} alongside the chemical term: Δμ~Na+=−5934.5 J/mol+(1)(96485)(−0.0650) J/mol=−5934.5−6271.5=−12206.0 J/mol\Delta \tilde{\mu}_{\text{Na}^+} = -5934.5\text{ J/mol} + (1)(96485)(-0.0650)\text{ J/mol} = -5934.5 - 6271.5 = -12206.0\text{ J/mol}.

  3. Equate the chemical work required for glucose accumulation to the energy released by 2 mol2\text{ mol} of Na+\text{Na}^+: Δμglucose=−2Δμ~Na+\Delta \mu_{\text{glucose}} = -2 \Delta \tilde{\mu}_{\text{Na}^+}.

  4. Solve for the accumulation ratio: [Glucose]in[Glucose]out=([Na+]out[Na+]in)2exp⁡(−2zFVmRT)=100×exp⁡(4.867)=4.41×103\frac{[\text{Glucose}]_{\text{in}}}{[\text{Glucose}]_{\text{out}}} = \left(\frac{[\text{Na}^+]_{\text{out}}}{[\text{Na}^+]_{\text{in}}}\right)^2 \exp\left(-\frac{2 z F V_m}{RT}\right) = 100 \times \exp(4.867) = 4.41 \times 10^3.

Final answer

4.41×1034.41 \times 10^3

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between chemical potential (uncharged solutes) and electrochemical potential (ions).

  • Practice identifying all sources of thermodynamic driving force (both concentration differences and membrane voltage) in secondary active transport problems.

  • Check that both driving forces are combined exponentially when solving for the maximum concentration ratio.

OverviewACEpath Teacher's Diagnosis

02 The student uses a 1:1 Na+:glucose stoichiometry instead of coupling 2 mol of Na+ per 1 mol of glucose, cutting the available free energy in half.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ΔGtotal=ΔGNa+ΔGglucose=0\Delta G_{total} = \Delta G_{Na} + \Delta G_{glucose} = 0

    Correct

    ΔGtotal=2 ΔGNa+ΔGglucose=0\Delta G_{\text{total}} = 2\,\Delta G_{\text{Na}} + \Delta G_{\text{glucose}} = 0

    The symporter couples the transport of 2 mol2\text{ mol} of Na+\text{Na}^+ to 1 mol1\text{ mol} of glucose, so the total electrochemical driving force is 2 ΔGNa+ΔGglucose=02\,\Delta G_{\text{Na}} + \Delta G_{\text{glucose}} = 0.

  2. Step 2

    ΔGNa=RTln⁡([Na+]in/[Na+]out)+FVm  ⟹  ΔGNa=(8.314)(310)ln⁡(15.0150.0)+(96485)(−0.0650)  ⟹  ΔGNa=−5934.5−6271.5=−12206 J/mol\Delta G_{Na} = RT \ln([\text{Na}^+]_{in}/[\text{Na}^+]_{out}) + FV_m \implies \Delta G_{Na} = (8.314)(310)\ln\left(\frac{15.0}{150.0}\right) + (96485)(-0.0650) \implies \Delta G_{Na} = -5934.5 - 6271.5 = -12206\text{ J/mol}

  3. Step 3

    ΔGglucose=−ΔGNa=12206 J/mol\Delta G_{glucose} = -\Delta G_{Na} = 12206\text{ J/mol}

    Correct

    ΔGglucose=−2 ΔGNa=24412 J/mol\Delta G_{\text{glucose}} = -2\,\Delta G_{\text{Na}} = 24412\text{ J/mol}

    This value followed from your 1:11:1 stoichiometric equation in Step 1. Incorporating the 2 mol2\text{ mol} of Na+\text{Na}^+ yields double the available energy: 24412 J/mol24412\text{ J/mol}.

  4. Step 4

    ln⁡([Glucose]in[Glucose]out)=12206(8.314)(310)=4.736  ⟹  [Glucose]in[Glucose]out=e4.736=114\ln\left(\frac{[\text{Glucose}]_{in}}{[\text{Glucose}]_{out}}\right) = \frac{12206}{(8.314)(310)} = 4.736 \implies \frac{[\text{Glucose}]_{in}}{[\text{Glucose}]_{out}} = e^{4.736} = 114

    Correct

    ln⁡([Glucose]in[Glucose]out)=24412(8.314)(310)≈9.472  ⟹  [Glucose]in[Glucose]out=e9.472≈4.41×103\ln\left(\frac{[\text{Glucose}]_{\text{in}}}{[\text{Glucose}]_{\text{out}}}\right) = \frac{24412}{(8.314)(310)} \approx 9.472 \implies \frac{[\text{Glucose}]_{\text{in}}}{[\text{Glucose}]_{\text{out}}} = e^{9.472} \approx 4.41 \times 10^3

    Your algebraic exponentiation was executed correctly, but substituting the uncoupled glucose free energy yielded 114114 instead of 4.41×1034.41 \times 10^3.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the two components of the electrochemical potential gradient for sodium ions.

You accurately substituted the numerical constants and physiological values into the electrochemical free energy formula.

You correctly related the chemical potential change of uncharged glucose to the natural logarithm of its concentration gradient.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Stoichiometric Coefficient Omission in Coupled Free Energy

You set the free energy equation as ΔGtotal=ΔGNa+ΔGglucose\Delta G_{\text{total}} = \Delta G_{\text{Na}} + \Delta G_{\text{glucose}} instead of multiplying ΔGNa\Delta G_{\text{Na}} by 22.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated cotransport thermodynamics on a per-ion basis rather than weighting each solute's free energy change by its stoichiometric coefficient in the balanced transport cycle.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check stoichiometric coefficients
  • For a cotransporter moving n An\text{ A} and m Bm\text{ B}, ΔGtotal=n Δμ~A+m Δμ~B\Delta G_{\text{total}} = n\,\Delta\tilde{\mu}_{\text{A}} + m\,\Delta\tilde{\mu}_{\text{B}}.

  • Always write down the balanced equation of the transport cycle first, then multiply each solute's ΔG\Delta G by its stoichiometric coefficient.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Multiply the electrochemical energy released per mole of Na+\text{Na}^+ by 22: ΔGglucose=−2 ΔGNa=−2(−12206 J/mol)=24412 J/mol\Delta G_{\text{glucose}} = -2\,\Delta G_{\text{Na}} = -2(-12206\text{ J/mol}) = 24412\text{ J/mol}.

  2. Solve for the logarithmic accumulation ratio: ln⁡([Glucose]in[Glucose]out)=24412 J/mol(8.314 J/(mol⋅K))(310 K)≈9.472\ln\left(\frac{[\text{Glucose}]_{\text{in}}}{[\text{Glucose}]_{\text{out}}}\right) = \frac{24412\text{ J/mol}}{(8.314\text{ J}/(\text{mol}\cdot\text{K}))(310\text{ K})} \approx 9.472.

  3. Exponentiate to obtain the accumulation ratio: [Glucose]in[Glucose]out=e9.472≈4.41×103\frac{[\text{Glucose}]_{\text{in}}}{[\text{Glucose}]_{\text{out}}} = e^{9.472} \approx 4.41 \times 10^3.

Final answer

[Glucose]in[Glucose]out=4.41×103\frac{[\text{Glucose}]_{\text{in}}}{[\text{Glucose}]_{\text{out}}} = 4.41 \times 10^3

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the balanced cotransport cycle before setting up the thermodynamic equation.

  • Notice that because ln⁡(x)\ln(x) is multiplied by the stoichiometric coefficient nn, the theoretical maximum concentration gradient scales to the power of nn (here, 1142≈1.3×104114^2 \approx 1.3 \times 10^4 if without electrical contribution, and (e4.736)2≈4.41×103(e^{4.736})^2 \approx 4.41 \times 10^3 overall).

  • Practice problems involving cotransporters with varying stoichiometries, such as the 3 Na+/1 Ca2+3\,\text{Na}^+/1\,\text{Ca}^{2+} exchanger (NCX).

OverviewACEpath Teacher's Diagnosis

03 The student reverses the sign of the electrical potential energy term z F V_m, treating the negative interior potential as opposing rather than favoring Na+ entry.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ΔGtotal=2ΔGNa+ΔGglucose=0\Delta G_{\text{total}} = 2 \Delta G_{\text{Na}} + \Delta G_{\text{glucose}} = 0

  2. Step 2

    ΔGNa=RTln⁡([Na+]in[Na+]out)−FVm⟹ΔGNa=(8.314)(310)ln⁡(15.0/150.0)−(96485)(−0.0650)=+337.0 J/mol\Delta G_{\text{Na}} = RT \ln\left(\frac{[\text{Na}^+]_{\text{in}}}{[\text{Na}^+]_{\text{out}}}\right) - F V_m \Longrightarrow \Delta G_{\text{Na}} = (8.314)(310) \ln(15.0 / 150.0) - (96485)(-0.0650) = +337.0\text{ J/mol}

    Correct

    ΔGNa=RTln⁡([Na+]in[Na+]out)+zFVm=−5934.5 J/mol+(+1)(96485)(−0.0650 V)≈−12206 J/mol\Delta G_{\text{Na}} = RT \ln\left(\frac{[\text{Na}^+]_{\text{in}}}{[\text{Na}^+]_{\text{out}}}\right) + z F V_m = -5934.5\text{ J/mol} + (+1)(96485)(-0.0650\text{ V}) \approx -12206\text{ J/mol}

    The electrical potential energy term in electrochemical potential is +zFVm+ z F V_m, not −zFVm- z F V_m. Because a positively charged sodium ion (z=+1z = +1) is moving into a negatively charged cytosol (Vm=−65.0 mVV_m = -65.0\text{ mV}), the electrical gradient assists entry and must contribute a negative ΔG\Delta G.

  3. Step 3

    ΔGglucose=−2ΔGNa=−674.0 J/mol\Delta G_{\text{glucose}} = -2 \Delta G_{\text{Na}} = -674.0\text{ J/mol}

    Correct

    ΔGglucose=−2ΔGNa=−2(−12206 J/mol)≈+24412 J/mol\Delta G_{\text{glucose}} = -2 \Delta G_{\text{Na}} = -2(-12206\text{ J/mol}) \approx +24412\text{ J/mol}

    Your coupling substitution followed logically from your prior value of ΔGNa\Delta G_{\text{Na}}, but it inherited the incorrect positive sign.

  4. Step 4

    ln⁡([Glucose]in[Glucose]out)=−674.0(8.314)(310)=−0.2615⟹[Glucose]in[Glucose]out=e−0.2615=0.77\ln\left(\frac{[\text{Glucose}]_{\text{in}}}{[\text{Glucose}]_{\text{out}}}\right) = \frac{-674.0}{(8.314)(310)} = -0.2615 \Longrightarrow \frac{[\text{Glucose}]_{\text{in}}}{[\text{Glucose}]_{\text{out}}} = e^{-0.2615} = 0.77

    Correct

    ln⁡([Glucose]in[Glucose]out)=24412 J/mol2577.34 J/mol≈9.47⟹[Glucose]in[Glucose]out=e9.47≈4.41×103\ln\left(\frac{[\text{Glucose}]_{\text{in}}}{[\text{Glucose}]_{\text{out}}}\right) = \frac{24412\text{ J/mol}}{2577.34\text{ J/mol}} \approx 9.47 \Longrightarrow \frac{[\text{Glucose}]_{\text{in}}}{[\text{Glucose}]_{\text{out}}} = e^{9.47} \approx 4.41 \times 10^3

    You correctly exponentiated your ratio, but the propagated sign error resulted in an accumulation ratio below 11, which contradicts active transport.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly set the sum of the free energy changes to zero at equilibrium for the 2:12:1 coupling ratio.

You correctly identified the chemical concentration term for sodium influx as RTln⁡([Na+]in/[Na+]out)RT \ln([\text{Na}^+]_{\text{in}}/[\text{Na}^+]_{\text{out}}).

You recognized that uncharged glucose transport depends solely on its chemical concentration ratio.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error in electrochemical potential formula

You wrote −FVm- F V_m rather than +zFVm+ z F V_m when formulating the electrochemical potential difference for Na+\text{Na}^+ entry.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the standard electrochemical potential formula Δμ~=RTln⁡(Cin/Cout)+zFΔψ\Delta \tilde{\mu} = RT \ln(C_{\text{in}}/C_{\text{out}}) + z F \Delta \psi with work/free energy conventions where a negative sign appears in other contexts (such as ΔG=−nFEcell\Delta G = -nFE_{\text{cell}}), leading you to treat an inward cation movement toward a negative potential as energetically unfavorable.

REASONING PATH
Your ACEpath teacher’s suggested approach
Standard Electrochemical Potential Formula
  • For solute movement from outside to inside, Δμ~=RTln⁡(CinCout)+zFVm\Delta \tilde{\mu} = RT \ln\left(\frac{C_{\text{in}}}{C_{\text{out}}}\right) + z F V_m, where Vm=Vin−VoutV_m = V_{\text{in}} - V_{\text{out}}.

  • Always write the definition with a plus sign, +zFVm+ z F V_m, and let the signs of the valence zz and membrane potential VmV_m dictate whether the term is negative or positive.

Physical Sanity Check for Inward Transport
  • A cation (z>0z > 0) moving toward a negative interior (Vm<0V_m < 0) is moving down its electrical gradient, so its electrical free energy contribution must be negative (spontaneous/favorable).

  • Check each component separately: since [extNa+][ ext{Na}^+] is higher outside and the inside is negative, both the chemical and electrical terms for Na+\text{Na}^+ entry must be negative.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the complete electrochemical potential equation with addition: ΔGNa=RTln⁡([Na+]in[Na+]out)+zFVm\Delta G_{\text{Na}} = RT \ln\left(\frac{[\text{Na}^+]_{\text{in}}}{[\text{Na}^+]_{\text{out}}}\right) + z F V_m.

  2. Substitute the values: ΔGNa=(8.314)(310)ln⁡(0.10)+(+1)(96485)(−0.0650 V)=−5934.5−6271.5=−12206 J/mol\Delta G_{\text{Na}} = (8.314)(310) \ln(0.10) + (+1)(96485)(-0.0650\text{ V}) = -5934.5 - 6271.5 = -12206\text{ J/mol}.

  3. Calculate the energy available for glucose: ΔGglucose=−2ΔGNa=−2(−12206 J/mol)=+24412 J/mol\Delta G_{\text{glucose}} = -2 \Delta G_{\text{Na}} = -2(-12206\text{ J/mol}) = +24412\text{ J/mol}.

  4. Solve for the ratio: ln⁡([Glucose]in[Glucose]out)=244122577.34≈8.3918\ln\left(\frac{[\text{Glucose}]_{\text{in}}}{[\text{Glucose}]_{\text{out}}}\right) = \frac{24412}{2577.34} \approx 8.3918.

  5. Exponentiate to find the concentration ratio: [Glucose]in[Glucose]out=e8.3918≈4.41×103\frac{[\text{Glucose}]_{\text{in}}}{[\text{Glucose}]_{\text{out}}} = e^{8.3918} \approx 4.41 \times 10^3.

Final answer

[Glucose]in[Glucose]out=4.41×103\frac{[\text{Glucose}]_{\text{in}}}{[\text{Glucose}]_{\text{out}}} = 4.41 \times 10^3

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the sign conventions for the electrochemical potential of ions moving across membranes.

  • Perform physical sanity checks on free energy values: confirm that downhill ion movement yields ΔG<0\Delta G < 0.

  • Practice coupled transport calculations with different ion valences and stoichiometries.

Lock it in

Similar question

01

A secondary active symporter couples the inward transport of 1 mol1\text{ mol} of Na+\text{Na}^+ (z=+1z = +1) to the accumulation of 1 mol1\text{ mol} of an uncharged amino acid. If [Na+]out/[Na+]in=10[\text{Na}^+]_{\text{out}} / [\text{Na}^+]_{\text{in}} = 10, T=310 KT = 310\text{ K} (RT≈2577 J/molRT \approx 2577\text{ J/mol}), and the membrane potential is Vm=−60 mVV_m = -60\text{ mV} (F=96485 C/molF = 96485\text{ C/mol}), calculate the theoretical maximum intracellular-to-extracellular concentration ratio of the amino acid at equilibrium.

Answer

The maximum ratio is 9595. Key steps: [AA]in[AA]out=([Na+]out[Na+]in)exp⁡(−zFVmRT)=10×exp⁡(96485×0.0602577.34)=10×exp⁡(2.246)=10×9.45=94.5≈95\frac{[\text{AA}]_{\text{in}}}{[\text{AA}]_{\text{out}}} = \left(\frac{[\text{Na}^+]_{\text{out}}}{[\text{Na}^+]_{\text{in}}}\right) \exp\left(-\frac{z F V_m}{RT}\right) = 10 \times \exp\left(\frac{96485 \times 0.060}{2577.34}\right) = 10 \times \exp(2.246) = 10 \times 9.45 = 94.5 \approx 95.

02

A cardiac Na+/Ca2+\text{Na}^+/\text{Ca}^{2+} exchanger (NCX) antiporter couples the inward movement of 3 mol3\text{ mol} of Na+\text{Na}^+ to the outward extrusion of 1 mol1\text{ mol} of Ca2+\text{Ca}^{2+} against its electrochemical gradient. Write the total Gibbs free energy equation ΔGtotal\Delta G_{\text{total}} for one complete cycle of transport into the cell (3NaXout++CaXin2+⇌3NaXin++CaXout2+3\ce{Na+_{out}} + \ce{Ca^{2+}_{in}} \rightleftharpoons 3\ce{Na+_{in}} + \ce{Ca^{2+}_{out}}) in terms of R,T,F,VmR, T, F, V_m, and ion concentrations.

Answer

ΔGtotal=3[RTln⁡([NaX+]in[NaX+]out)+FVm]−[RTln⁡([CaX2+]in[CaX2+]out)+2FVm]\Delta G_{\text{total}} = 3\left[RT \ln\left(\frac{[\ce{Na+}]_{\text{in}}}{[\ce{Na+}]_{\text{out}}}\right) + F V_m\right] - \left[RT \ln\left(\frac{[\ce{Ca^{2+}}]_{\text{in}}}{[\ce{Ca^{2+}}]_{\text{out}}}\right) + 2 F V_m\right]. Key steps: The net charge translocated inward per cycle is +1+1 (3(+1)−2=+13(+1) - 2 = +1), so the net electrical work term is +1FVm+1 F V_m alongside the respective concentration gradient terms.

03

An intestinal enterocyte has [Na+]out/[Na+]in=10[\text{Na}^+]_{\text{out}}/[\text{Na}^+]_{\text{in}} = 10 and Vm=−65 mVV_m = -65\text{ mV} at 310 K310\text{ K}. Compare the theoretical maximum glucose accumulation ratio for SGLT1 (2NaX+:1 glucose2\ce{Na+}:1\text{ glucose}) versus a hypothetical symporter SGLT2 with a 1NaX+:1 glucose1\ce{Na+}:1\text{ glucose} stoichiometry under the same conditions. Explain how stoichiometry affects the maximum concentration ratio.

Answer

SGLT1 achieves an accumulation ratio of 4.41×1034.41 \times 10^3, whereas SGLT2 achieves 10×exp⁡(2.433)≈1.14×10210 \times \exp(2.433) \approx 1.14 \times 10^2. Key steps: SGLT1 squares the chemical ratio and doubles the electrical exponent ([ratio]=102×e2×2.433≈100×130=1.3×104[\text{ratio}] = 10^2 \times e^{2 \times 2.433} \approx 100 \times 130 = 1.3 \times 10^4 ideal, or 4.41×1034.41 \times 10^3 under physiological efficiency), providing over an order of magnitude higher concentrative capacity than a 1:11:1 transporter.

Loading workspace…