Resources

An asynchronous culture of mammalian fibroblasts undergoing exponential growth has a steady-state population doubling time (generation time, TT) of 24.0 hours24.0\text{ hours}. Fluorescence-activated cell sorting (FACS) and microscopic inspection determine that out of 1,2001{,}200 randomly sampled proliferating cells, 650650 are in G1G_1 phase, 300300 are in S\text{S} phase, 175175 are in G2G_2 phase, and 7575 are in active MM phase (mitosis). Assuming an ideal logarithmic growth distribution where the fraction of cells in each phase is proportional to its duration, calculate: (a) the duration of S\text{S} phase (tSt_{\text{S}}) in hours, and (b) the mitotic index (MI) expressed as a percentage.

Answer and steps

Final answer

(a) tS=6.00 hourst_{\text{S}} = 6.00\text{ hours}; (b) Mitotic Index (MI)=6.25%\text{Mitotic Index (MI)} = 6.25\%.

Steps

01

Calculate the Duration of S\text{S} Phase (tSt_{\text{S}})

Understanding the Proportional Relationship in an Asynchronous Population

In an asynchronous, actively dividing cell population, cells are distributed across the different phases of the cell cycle (G1G_1, S\text{S}, G2G_2, and M\text{M}). Under the given model where the fraction of cells observed in any specific phase is directly proportional to the time cells spend in that phase, we use the following relationship: NphaseNtotal=tphaseT\frac{N_{\text{phase}}}{N_{\text{total}}} = \frac{t_{\text{phase}}}{T} where:

  • NphaseN_{\text{phase}} is the number of cells observed in a given phase.
  • NtotalN_{\text{total}} is the total number of cells scored (1,2001{,}200).
  • tphaset_{\text{phase}} is the duration of that specific phase.
  • TT is the total generation (doubling) time of the cell cycle (24.0 hours24.0\text{ hours}).

  1. Identify the given values for S\text{S} phase:

    • Number of cells in S\text{S} phase (NSN_{\text{S}}) =300= 300
    • Total number of cells (NtotalN_{\text{total}}) =1,200= 1{,}200
    • Total cell cycle duration (TT) =24.0 hours= 24.0\text{ hours}
  2. Determine the fraction of cells in S\text{S} phase: Fraction of S phase=3001,200=14=0.25\text{Fraction of S phase} = \frac{300}{1{,}200} = \frac{1}{4} = 0.25
  3. Multiply by the total generation time to find tSt_{\text{S}}: tS=(NSNtotal)⋅T=0.25⋅24.0 hours=6.00 hourst_{\text{S}} = \left(\frac{N_{\text{S}}}{N_{\text{total}}}\right) \cdot T = 0.25 \cdot 24.0\text{ hours} = 6.00\text{ hours}

02

Calculate the Mitotic Index (MI\text{MI})

The Mitotic Index is defined as the percentage of cells undergoing active mitosis (M\text{M} phase) within a given cell population:

Mitotic Index (MI)=NMNtotal×100%\text{Mitotic Index (MI)} = \frac{N_{\text{M}}}{N_{\text{total}}} \times 100\%

  1. Identify the given values for M\text{M} phase:

    • Number of cells in mitosis (NMN_{\text{M}}) =75= 75
    • Total number of cells (NtotalN_{\text{total}}) =1,200= 1{,}200
  2. Substitute the values into the formula: MI=751,200×100%=116×100%=6.25%\text{MI} = \frac{75}{1{,}200} \times 100\% = \frac{1}{16} \times 100\% = 6.25\%

(Note: Ensure that the denominator used is the total number of sampled cells rather than the number of interphase cells.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates the mitotic index by dividing the number of mitotic cells by only the interphase cells instead of the total population.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Total cells=650+300+175+75=1200  ⟹  tS=(3001200)∗24.0=6.0 hours\text{Total cells} = 650 + 300 + 175 + 75 = 1200 \implies t_{\text{S}} = \left(\frac{300}{1200}\right) * 24.0 = 6.0\text{ hours}

  2. Step 2

    Interphase cells=650+300+175=1125  ⟹  MI=(751125)∗100%=6.67%\text{Interphase cells} = 650 + 300 + 175 = 1125 \implies \text{MI} = \left(\frac{75}{1125}\right) * 100\% = 6.67\%

    Correct

    MI=(NMNtotal)×100%=(751200)×100%=6.25%\text{MI} = \left(\frac{N_{\text{M}}}{N_{\text{total}}}\right) \times 100\% = \left(\frac{75}{1200}\right) \times 100\% = 6.25\%

    The mitotic index is defined as the fraction of all observed cells undergoing mitosis, so the denominator must be the total population (1,2001{,}200), not just the interphase cells (1,1251{,}125).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly summed the cells across all stages to verify the total sample size of 1,2001{,}200.

You set up and evaluated the proportionality equation accurately to find tS=6.0 hourst_{\text{S}} = 6.0\text{ hours}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Denominator misidentification in mitotic index calculation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the mitotic index as an odds ratio between mitotic cells and non-mitotic (interphase) cells, rather than as a proportion of the entire sampled population.

REASONING PATH
Your ACEpath teacher’s suggested approach
Definition of Mitotic Index
  • Mitotic Index (MI)=Number of cells in mitosisTotal number of cells scored×100%\text{Mitotic Index (MI)} = \frac{\text{Number of cells in mitosis}}{\text{Total number of cells scored}} \times 100\%

  • Always use the total cell count (Ntotal=Ninterphase+NmitosisN_{\text{total}} = N_{\text{interphase}} + N_{\text{mitosis}}) in the denominator when calculating the mitotic index.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the total number of cells scored: Ntotal=1,200N_{\text{total}} = 1{,}200.

  2. Identify the number of cells in active mitosis: NM=75N_{\text{M}} = 75.

  3. Calculate the percentage: MI=751,200×100%=6.25%\text{MI} = \frac{75}{1{,}200} \times 100\% = 6.25\%.

Final answer

(a) tS=6.00 hourst_{\text{S}} = 6.00\text{ hours}; (b) Mitotic Index (MI)=6.25%\text{Mitotic Index (MI)} = 6.25\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the exact formula for the mitotic index to remember that it represents a part-to-whole fraction.

  • Recalculate mitotic indices on practice sets to build the habit of checking whether your denominator includes mitotic cells.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the cell count of G1 phase with S phase when calculating the duration of S phase.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    tS=(6501200)×24.0  ⟹  tS=13.0 hourst_{\text{S}} = \left(\frac{650}{1200}\right) \times 24.0 \implies t_{\text{S}} = 13.0\text{ hours}

    Correct

    tS=(3001200)×24.0=6.00 hourst_{\text{S}} = \left(\frac{300}{1200}\right) \times 24.0 = 6.00\text{ hours}

    You applied the proportional relationship correctly, but you substituted N=650N = 650 (the count for G1G_1 phase) instead of N=300N = 300 (the count for S\text{S} phase).

  2. Step 2

    MI=(751200)×100%  ⟹  MI=6.25%\text{MI} = \left(\frac{75}{1200}\right) \times 100\% \implies \text{MI} = 6.25\%

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and applied the proportionality formula relating phase cell count to phase duration.

You correctly identified the total cell count as 1,2001{,}200 and the generation time as 24.0 hours24.0\text{ hours}.

You correctly calculated the mitotic index using the mitotic cell count and total cell population.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Data extraction error (substituted G1 cell count for S phase)

You extracted 650650 cells into the formula for tSt_{\text{S}}, which corresponds to G1G_1 phase rather than S\text{S} phase (300300 cells).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You selected the first numerical phase count listed in the prompt (G1=650G_1 = 650) rather than matching the specific phase requested in part (a) (extS ext{S} phase =300= 300).

REASONING PATH
Your ACEpath teacher’s suggested approach
Match Phase Label to Data
  • Each cell cycle phase (G1G_1, S\text{S}, G2G_2, M\text{M}) has a distinct cell count. Always verify that the numerator matches the specific phase being solved.

  • Before calculating, write out NS=300N_{\text{S}} = 300 explicitly to avoid grabbing NG1=650N_{G_1} = 650 by accident.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the number of cells specifically in S\text{S} phase: NS=300N_{\text{S}} = 300.

  2. Set up the proportionality equation: tS=(NSNtotal)×T=(3001200)×24.0 hourst_{\text{S}} = \left(\frac{N_{\text{S}}}{N_{\text{total}}}\right) \times T = \left(\frac{300}{1200}\right) \times 24.0\text{ hours}.

  3. Simplify the fraction: 3001200=0.25\frac{300}{1200} = 0.25.

  4. Multiply by the generation time: tS=0.25×24.0=6.00 hourst_{\text{S}} = 0.25 \times 24.0 = 6.00\text{ hours}.

Final answer

(a) tS=6.00 hourst_{\text{S}} = 6.00\text{ hours}; (b) Mitotic Index (MI)=6.25%\text{Mitotic Index (MI)} = 6.25\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Explicitly list each phase and its corresponding cell count (G1=650G_1 = 650, S=300\text{S} = 300, G2=175G_2 = 175, M=75\text{M} = 75) before plugging numbers into the duration formula.

  • Perform a sanity check: sum the calculated durations of all phases to confirm they add up to the total cycle time (T=24.0 hoursT = 24.0\text{ hours}).

OverviewACEpath Teacher's Diagnosis

03 The student computes the mitotic index as a decimal fraction without multiplying by 100 to express it as a percentage.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    tS=(3001200)⋅24.0  ⟹  tS=6.0 hourst_{\text{S}} = \left(\frac{300}{1200}\right) \cdot 24.0 \implies t_{\text{S}} = 6.0\text{ hours}

  2. Step 2

    MI=751200  ⟹  MI=0.0625\text{MI} = \frac{75}{1200} \implies \text{MI} = 0.0625

    Correct

    MI=751200×100%=6.25%\text{MI} = \frac{75}{1200} \times 100\% = 6.25\%

    You correctly identified the number of mitotic cells over total cells, but you stopped at the decimal fraction 0.06250.0625 instead of multiplying by 100%100\% to express the mitotic index as a percentage.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the total cell count as 1,2001{,}200.

You correctly applied the proportional time formula to determine the length of S phase.

You correctly identified the mitotic cell count and computed the fraction of cells in mitosis.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted percentage conversion

Leaving the mitotic index as a decimal fraction (0.06250.0625) instead of multiplying by 100%100\%.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the explicit unit requirement in the question prompt to express the mitotic index as a percentage.

REASONING PATH
Your ACEpath teacher’s suggested approach
Format and Units Check
  • When an index or rate is requested as a percentage, multiply the decimal fraction by 100%100\%.

  • Re-read the prompt prompt's final phrasing to confirm whether the index should be reported as a decimal proportion (0.06250.0625) or a percentage (6.25%6.25\%).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the decimal fraction to a percentage: MI=0.0625×100%=6.25%\text{MI} = 0.0625 \times 100\% = 6.25\%.

Final answer

(a) tS=6.00 hourst_{\text{S}} = 6.00\text{ hours}; (b) Mitotic Index (MI)=6.25%\text{Mitotic Index (MI)} = 6.25\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Always double-check the requested format in the prompt (decimal vs. percentage vs. ratio) before boxing your final answer.

  • Practice explicitly writing out the unit factor ×100%\times 100\% in mitotic index definitions so it becomes automatic.

Lock it in

Similar question

01

A root apical meristem sample contains 4040 cells in prophase, 1515 in metaphase, 1010 in anaphase, 1515 in telophase, and 720720 cells in interphase. Calculate the mitotic index of this tissue.

Answer

MI=10.0%\text{MI} = 10.0\% Total mitotic cells NM=40+15+10+15=80N_{\text{M}} = 40 + 15 + 10 + 15 = 80. Total cells Ntotal=80+720=800N_{\text{total}} = 80 + 720 = 800. MI=80800×100%=10.0%\text{MI} = \frac{80}{800} \times 100\% = 10.0\%.

02

An asynchronous culture of HeLa cells has a total generation time of 20.0 hours20.0\text{ hours}. In a random sample of 2,5002{,}500 cells, 150150 are observed in active mitosis. (a) Determine the mitotic index. (b) Assuming phase duration is proportional to cell count, calculate the average duration of mitosis (tMt_{\text{M}}) in minutes.

Answer

(a) MI=6.00%\text{MI} = 6.00\%; (b) tM=72.0 minutest_{\text{M}} = 72.0\text{ minutes} (a) MI=1502500×100%=6.00%\text{MI} = \frac{150}{2500} \times 100\% = 6.00\%. (b) tM=0.0600×20.0 hours=1.20 hours=72.0 minutest_{\text{M}} = 0.0600 \times 20.0\text{ hours} = 1.20\text{ hours} = 72.0\text{ minutes}.

03

A tissue biopsy displays a mitotic index of 8.0%8.0\%. If an observer counted 368368 cells in interphase, how many cells in total were undergoing mitosis in that sample?

Answer

NM=32 cellsN_{\text{M}} = 32\text{ cells} Interphase represents 100%−8.0%=92.0%100\% - 8.0\% = 92.0\% of the total population. Total cells Ntotal=3680.92=400N_{\text{total}} = \frac{368}{0.92} = 400. Mitotic cells NM=400−368=32 cellsN_{\text{M}} = 400 - 368 = 32\text{ cells} (or 400×0.08=32400 \times 0.08 = 32).

Loading workspace…