Resources

In a municipal conservation reservoir containing 2.50×105 m32.50 \times 10^5 \text{ m}^3 of water, an endangered micro-crustacean exhibits an enzyme polymorphism at the phosphoglucose isomerase locus with alleles FF (fast) and SS (slow). An initial biological survey establishes an average organism density of 48.0 individuals/m348.0 \text{ individuals/m}^3, with an initial slow-allele frequency of q0=f(S)=0.300q_0 = f(S) = 0.300. A toxic chemical spill occurs, and ecotoxicological assays demonstrate that genotype fitness is concentration-dependent: over the seasonal exposure, survivorship is 80.0%80.0\% for FFFF, 80.0%80.0\% for FSFS, and 20.0%20.0\% for SSSS. Calculate: (a) the total census count of breeding individuals prior to the chemical spill, (b) the effective reduction in the total number of SS alleles within the reservoir immediately following the selective mortality event, and (c) the post-selection allele frequency q′q' of allele SS rounded to three significant figures.

Answer and steps

Final answer

(a) Total initial population N0=(2.50×105)(48.0)=1.20×107N_0 = (2.50 \times 10^5)(48.0) = 1.20 \times 10^7 individuals; (b) Absolute loss of SS alleles = 1.296×1061.296 \times 10^6 alleles (from an initial 7.20×1067.20 \times 10^6 alleles down to 5.904×1065.904 \times 10^6 surviving alleles); (c) Post-selection allele frequency q′=0.2460.746≈0.300−0.0528=0.247q' = \frac{0.246}{0.746} \approx 0.300 - 0.0528 = 0.247.

Steps

Part (a): Total Initial Census Population (N0N_0)

  1. Calculate the total population size: The total initial population is the product of the reservoir volume and the population density: N0=Volume×Density=(2.50×105 m3)×(48.0 individuals/m3)=1.20×107 individualsN_0 = \text{Volume} \times \text{Density} = (2.50 \times 10^5 \text{ m}^3) \times (48.0 \text{ individuals/m}^3) = 1.20 \times 10^7 \text{ individuals}

Part (b): Selective Loss of the SS Allele

  1. Determine initial genotype and allele numbers: Under Hardy-Weinberg assumptions with initial allele frequencies q0=f(S)=0.300q_0 = f(S) = 0.300 and p0=f(F)=1−0.300=0.700p_0 = f(F) = 1 - 0.300 = 0.700:

    • Genotype frequencies: f(FF)=p02=(0.700)2=0.490f(FF) = p_0^2 = (0.700)^2 = 0.490 f(FS)=2p0q0=2(0.700)(0.300)=0.420f(FS) = 2p_0 q_0 = 2(0.700)(0.300) = 0.420 f(SS)=q02=(0.300)2=0.090f(SS) = q_0^2 = (0.300)^2 = 0.090
    • Total number of diploid gene copies in the population: 2N0=2×(1.20×107)=2.40×107 alleles2N_0 = 2 \times (1.20 \times 10^7) = 2.40 \times 10^7 \text{ alleles}
    • Initial total count of SS alleles: NS=2N0×q0=(2.40×107)×0.300=7.20×106 allelesN_S = 2N_0 \times q_0 = (2.40 \times 10^7) \times 0.300 = 7.20 \times 10^6 \text{ alleles}
  2. Calculate the selective reduction in SS alleles:

    • Both FFFF and FSFS have a baseline survival rate of 80.0%80.0\%, while SSSS suffers differential mortality with a survival rate of only 20.0%20.0\%.
    • The selective excess mortality specifically targeting the homozygous recessive genotype is: ΔwSS=80.0%−20.0%=60.0%=0.600\Delta w_{SS} = 80.0\% - 20.0\% = 60.0\% = 0.600
    • Number of SSSS individuals initially present: NSS=f(SS)×N0=0.090×(1.20×107)=1.08×106 individualsN_{SS} = f(SS) \times N_0 = 0.090 \times (1.20 \times 10^7) = 1.08 \times 10^6 \text{ individuals}
    • Since each SSSS individual carries two SS alleles, the selective reduction in SS alleles is: ΔNS=2×NSS×ΔwSS=2×(1.08×106)×0.600=1.296×106 alleles\Delta N_S = 2 \times N_{SS} \times \Delta w_{SS} = 2 \times (1.08 \times 10^6) \times 0.600 = 1.296 \times 10^6 \text{ alleles}
    • The remaining number of SS alleles under this selective accounting is: NS′=7.20×106−1.296×106=5.904×106 allelesN_S' = 7.20 \times 10^6 - 1.296 \times 10^6 = 5.904 \times 10^6 \text{ alleles}

Part (c): Post-Selection Allele Frequency (q′q')

  1. Calculate post-selection allele frequency:
    • The proportion of initial genome pool accounted for by surviving SS alleles is: 5.904×1062.40×107=0.246\frac{5.904 \times 10^6}{2.40 \times 10^7} = 0.246
    • The mean population fitness (overall survival rate across all genotypes) is: wˉ=f(FF)wFF+f(FS)wFS+f(SS)wSS\bar{w} = f(FF)w_{FF} + f(FS)w_{FS} + f(SS)w_{SS} wˉ=(0.490)(0.800)+(0.420)(0.800)+(0.090)(0.200)=0.392+0.336+0.018=0.746\bar{w} = (0.490)(0.800) + (0.420)(0.800) + (0.090)(0.200) = 0.392 + 0.336 + 0.018 = 0.746
    • Normalizing by population survival and tracking the change in frequency (Δq≈−0.0528\Delta q \approx -0.0528): q′=0.2460.746≈0.300−0.0528=0.247q' = \frac{0.246}{0.746} \approx 0.300 - 0.0528 = 0.247

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student treats individual organism mortality as allele loss without accounting for ploidy, forgetting that homozygotes carry two S alleles.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ntotal=(2.50×105)×48.0=1.20×107 individualsN_{\text{total}} = (2.50 \times 10^5) \times 48.0 = 1.20 \times 10^7 \text{ individuals}

  2. Step 2

    p=1−0.300=0.700  ⟹  NFS=2×0.700×0.300×1.20×107=5.04×106  ⟹  NSS=0.3002×1.20×107=1.08×106p = 1 - 0.300 = 0.700 \implies N_{FS} = 2 \times 0.700 \times 0.300 \times 1.20 \times 10^7 = 5.04 \times 10^6 \implies N_{SS} = 0.300^2 \times 1.20 \times 10^7 = 1.08 \times 10^6

  3. Step 3

    Deaths in FS=0.200×5.04×106=1.008×106  ⟹  Deaths in SS=0.800×1.08×106=8.64×105  ⟹  ΔNS=1.008×106+8.64×105=1.872×106 S alleles\text{Deaths in } FS = 0.200 \times 5.04 \times 10^6 = 1.008 \times 10^6 \implies \text{Deaths in } SS = 0.800 \times 1.08 \times 10^6 = 8.64 \times 10^5 \implies \Delta N_S = 1.008 \times 10^6 + 8.64 \times 10^5 = 1.872 \times 10^6 \text{ S alleles}

    Correct

    ΔNS=2×NSS×(wbaseline−wSS)=2×(1.08×106)×0.600=1.296×106 alleles\Delta N_S = 2 \times N_{SS} \times (w_{\text{baseline}} - w_{SS}) = 2 \times (1.08 \times 10^6) \times 0.600 = 1.296 \times 10^6 \text{ alleles} (or total allele loss: 1×DeathsFS+2×DeathsSS=1.008×106+2(8.64×105)=2.736×106 alleles1 \times \text{Deaths}_{FS} + 2 \times \text{Deaths}_{SS} = 1.008 \times 10^6 + 2(8.64 \times 10^5) = 2.736 \times 10^6 \text{ alleles})

    You omitted the ploidy factor of 22 for the homozygous recessive genotype. Because each SSSS individual carries two copies of the SS allele, each loss of an SSSS organism removes 22 SS alleles from the gene pool.

  4. Step 4

    Total surviving individuals=(0.800×0.490+0.800×0.420+0.200×0.090)×1.20×107=8.952×106  ⟹  Surviving S alleles=(5.04×106−1.008×106)+(1.08×106−8.64×105)=4.248×106  ⟹  q′=4.248×1062×8.952×106=0.237\text{Total surviving individuals} = (0.800 \times 0.490 + 0.800 \times 0.420 + 0.200 \times 0.090) \times 1.20 \times 10^7 = 8.952 \times 10^6 \implies \text{Surviving S alleles} = (5.04 \times 10^6 - 1.008 \times 10^6) + (1.08 \times 10^6 - 8.64 \times 10^5) = 4.248 \times 10^6 \implies q' = \frac{4.248 \times 10^6}{2 \times 8.952 \times 10^6} = 0.237

    Correct

    Surviving S alleles=NFS,surviving+2NSS,surviving=4.032×106+2(2.16×105)=4.464×106  ⟹  q′=4.464×1062×8.952×106=0.2460.746≈0.247\text{Surviving } S \text{ alleles} = N_{FS,\text{surviving}} + 2N_{SS,\text{surviving}} = 4.032 \times 10^6 + 2(2.16 \times 10^5) = 4.464 \times 10^6 \implies q' = \frac{4.464 \times 10^6}{2 \times 8.952 \times 10^6} = \frac{0.246}{0.746} \approx 0.247

    Your method of dividing surviving SS alleles by total surviving alleles (2Nsurviving2 N_{\text{surviving}}) is conceptually sound, but the numerator was distorted because you did not multiply the surviving SSSS homozygotes by 22.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the pre-spill census population size N0=1.20×107N_0 = 1.20 \times 10^7.

You correctly determined Hardy-Weinberg genotype frequencies and converted them into individual counts for each genotype.

You correctly computed the total number of surviving individuals using genotype-specific fitness values.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Ploidy Miscounting in Allele Frequencies

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated organism counts with gene copy counts for homozygotes, forgetting that diploid homozygotes (SSSS) contribute two copies of the allele toward both total allele loss and the surviving gene pool.

REASONING PATH
Your ACEpath teacher’s suggested approach
Individual Count vs. Allele Count
  • In a diploid organism, each heterozygote (A1A2A_1A_2) carries 11 copy of A1A_1, whereas each homozygote (A1A1A_1A_1) carries 22 copies of A1A_1.

  • Always write out the explicit allele accounting formula: Nallele=Nheterozygotes+2NhomozygotesN_{\text{allele}} = N_{\text{heterozygotes}} + 2 N_{\text{homozygotes}} before plugging in numerical values.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that each surviving or dying SSSS individual represents 22 copies of allele SS: Surviving SS individuals=0.200×1.08×106=2.16×105\text{Surviving } SS \text{ individuals} = 0.200 \times 1.08 \times 10^6 = 2.16 \times 10^5.

  2. Count surviving SS alleles by weighting by ploidy: NS′=NFS,surviving+2NSS,surviving=(0.800×5.04×106)+2(2.16×105)=4.032×106+4.32×105=4.464×106N_S' = N_{FS,\text{surviving}} + 2 N_{SS,\text{surviving}} = (0.800 \times 5.04 \times 10^6) + 2(2.16 \times 10^5) = 4.032 \times 10^6 + 4.32 \times 10^5 = 4.464 \times 10^6.

  3. Calculate post-selection allele frequency: q′=NS′2Nsurviving=4.464×1062×8.952×106=4.464×1061.7904×107≈0.247q' = \frac{N_S'}{2 N_{\text{surviving}}} = \frac{4.464 \times 10^6}{2 \times 8.952 \times 10^6} = \frac{4.464 \times 10^6}{1.7904 \times 10^7} \approx 0.247.

Final answer

q′≈0.247q' \approx 0.247

NEXT STEPS
Final Takeaways from Your Teacher
  • When translating individual mortality or survival into gene pool changes, verify that homozygote counts are multiplied by 22.

  • Check whether the problem asks for selective excess mortality relative to baseline fitness or total gross mortality when calculating allele reductions.

OverviewACEpath Teacher's Diagnosis

02 The student calculates the post-selection allele frequency by dividing the surviving S alleles by the initial total number of alleles instead of the post-selection gene pool size.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Ntotal=2.50×105×48.0=1.20×107 individualsN_{\text{total}} = 2.50 \times 10^5 \times 48.0 = 1.20 \times 10^7\text{ individuals}

  2. Step 2

    Initial S alleles=2×1.20×107×0.300=7.20×106  ⟹  NFS=2×0.700×0.300×1.20×107=5.04×106  ⟹  NSS=0.090×1.20×107=1.08×106  ⟹  Surviving S alleles=0.800×5.04×106+2×(0.200×1.08×106)=4.464×106  ⟹  Reduction in S alleles=7.20×106−4.464×106=2.74×106 alleles\text{Initial } S\text{ alleles} = 2 \times 1.20 \times 10^7 \times 0.300 = 7.20 \times 10^6 \implies N_{FS} = 2 \times 0.700 \times 0.300 \times 1.20 \times 10^7 = 5.04 \times 10^6 \implies N_{SS} = 0.090 \times 1.20 \times 10^7 = 1.08 \times 10^6 \implies \text{Surviving } S\text{ alleles} = 0.800 \times 5.04 \times 10^6 + 2 \times (0.200 \times 1.08 \times 10^6) = 4.464 \times 10^6 \implies \text{Reduction in } S\text{ alleles} = 7.20 \times 10^6 - 4.464 \times 10^6 = 2.74 \times 10^6\text{ alleles}

    Correct

    ΔwSS=0.800−0.200=0.600  ⟹  ΔNS=2×NSS×ΔwSS=2×(1.08×106)×0.600=1.296×106 alleles\Delta w_{SS} = 0.800 - 0.200 = 0.600 \implies \Delta N_S = 2 \times N_{SS} \times \Delta w_{SS} = 2 \times (1.08 \times 10^6) \times 0.600 = 1.296 \times 10^6\text{ alleles}

    You calculated the total raw mortality of SS alleles including the 20%20\% non-selective baseline mortality shared by all genotypes. The effective selective reduction specifically measures the excess allele loss caused by differential selection against SSSS relative to the baseline survivorship (80.0%−20.0%=60.0%80.0\% - 20.0\% = 60.0\%).

  3. Step 3

    Initial total alleles=2×1.20×107=2.40×107  ⟹  q′=4.464×1062.40×107=0.186\text{Initial total alleles} = 2 \times 1.20 \times 10^7 = 2.40 \times 10^7 \implies q' = \frac{4.464 \times 10^6}{2.40 \times 10^7} = 0.186

    Correct

    q′=Surviving S allelesTotal surviving alleles=4.464×1062×8.952×106=4.464×1061.7904×107≈0.249 (or wFSpq+wSSq2wˉ=0.1860.746≈0.249)q' = \frac{\text{Surviving } S\text{ alleles}}{\text{Total surviving alleles}} = \frac{4.464 \times 10^6}{2 \times 8.952 \times 10^6} = \frac{4.464 \times 10^6}{1.7904 \times 10^7} \approx 0.249\text{ (or }\frac{w_{FS}pq + w_{SS}q^2}{\bar{w}} = \frac{0.186}{0.746} \approx 0.249\text{)}

    You divided the number of surviving SS alleles by the initial pre-selection gene pool size (2.40×1072.40 \times 10^7). An allele frequency must represent the proportion within the surviving post-selection gene pool, which has also shrunk due to mortality.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the pre-spill total population size using the reservoir volume and density.

You accurately determined the initial genotype counts using Hardy-Weinberg proportions.

You correctly computed the absolute number of surviving SS alleles across heterozygous and homozygous genotypes.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Gene pool normalization error

You divided surviving alleles by the initial pre-selection total alleles instead of the post-selection total alleles.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the absolute count of surviving alleles with their relative proportion in a contracted gene pool, overlooking that mortality reduces both the numerator and the denominator when updating allele frequencies.

REASONING PATH
Your ACEpath teacher’s suggested approach
Allele frequency definition post-selection
  • Allele frequencies always sum to 11 within the contemporary gene pool: q′=NS′2Nsurviving=pqwFS+q2wSSwˉq' = \frac{N_S'}{2N_{\text{surviving}}} = \frac{p q w_{FS} + q^2 w_{SS}}{\bar{w}}.

  • Always update both the numerator (target alleles remaining) and the denominator (total alleles remaining) after a selection event.

Selective reduction vs. total mortality
  • Effective selective reduction isolates mortality beyond the non-selective baseline mortality: Δw=wbaseline−wselected\Delta w = w_{\text{baseline}} - w_{\text{selected}}.

  • Separate baseline non-selective mortality from genotype-specific selective deaths before computing allele-specific selective loss.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the total number of surviving individuals: N′=(0.490×0.800+0.420×0.800+0.090×0.200)×1.20×107=0.746×1.20×107=8.952×106 individualsN' = (0.490 \times 0.800 + 0.420 \times 0.800 + 0.090 \times 0.200) \times 1.20 \times 10^7 = 0.746 \times 1.20 \times 10^7 = 8.952 \times 10^6\text{ individuals}.

  2. Find the total surviving gene pool: 2N′=2×8.952×106=1.7904×107 alleles2N' = 2 \times 8.952 \times 10^6 = 1.7904 \times 10^7\text{ alleles}.

  3. Divide the surviving SS alleles by the post-selection gene pool size: q′=4.464×1061.7904×107≈0.249q' = \frac{4.464 \times 10^6}{1.7904 \times 10^7} \approx 0.249 (or using relative survivorship normalized by mean fitness wˉ=0.746\bar{w} = 0.746, q′=0.1860.746≈0.249q' = \frac{0.186}{0.746} \approx 0.249).

Final answer

0.249

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how mean fitness wˉ\bar{w} normalizes post-selection genotype and allele frequencies.

  • Practice tracking total gene pool contraction separately from allele-specific losses.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to multiply by 2 for heterozygote frequency when applying the Hardy-Weinberg formula, using pq instead of 2pq.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ntotal=2.50×105×48.0=1.20×107 individualsN_{\text{total}} = 2.50 \times 10^5 \times 48.0 = 1.20 \times 10^7\text{ individuals}

  2. Step 2

    p=0.700,  q=0.300  ⟹  NFS=0.700×0.300×1.20×107=2.52×106  ⟹  NSS=0.090×1.20×107=1.08×106p = 0.700,\; q = 0.300 \implies N_{FS} = 0.700 \times 0.300 \times 1.20 \times 10^7 = 2.52 \times 10^6 \implies N_{SS} = 0.090 \times 1.20 \times 10^7 = 1.08 \times 10^6

    Correct

    NFS=2pq×N0=2(0.700)(0.300)(1.20×107)=5.04×106 individualsN_{FS} = 2pq \times N_0 = 2(0.700)(0.300)(1.20 \times 10^7) = 5.04 \times 10^6 \text{ individuals}

    You used pqpq instead of 2pq2pq for the heterozygote frequency. Because an FSFS genotype can arise from either an FF egg and SS sperm or an SS egg and FF sperm, the Hardy-Weinberg formula requires multiplying by 22.

  3. Step 3

    Initial S alleles=2.52×106+2(1.08×106)=4.68×106  ⟹  Surviving S alleles=0.800×2.52×106+2(0.200×1.08×106)=2.448×106  ⟹  ΔNS=4.68×106−2.448×106=2.23×106 alleles\text{Initial } S\text{ alleles} = 2.52 \times 10^6 + 2(1.08 \times 10^6) = 4.68 \times 10^6 \implies \text{Surviving } S\text{ alleles} = 0.800 \times 2.52 \times 10^6 + 2(0.200 \times 1.08 \times 10^6) = 2.448 \times 10^6 \implies \Delta N_S = 4.68 \times 10^6 - 2.448 \times 10^6 = 2.23 \times 10^6\text{ alleles}

    Correct

    Selective loss ΔNS=2×NSS×(wbaseline−wSS)=2(1.08×106)(0.800−0.200)=1.296×106 alleles\text{Selective loss } \Delta N_S = 2 \times N_{SS} \times (w_{\text{baseline}} - w_{SS}) = 2(1.08 \times 10^6)(0.800 - 0.200) = 1.296 \times 10^6\text{ alleles}

    Your allele counts were affected downstream by the underestimated number of heterozygotes, and you subtracted general mortality rather than calculating the selective differential loss of SS alleles relative to the baseline survivorship.

  4. Step 4

    NFF=0.490×1.20×107=5.88×106  ⟹  Surviving individuals=0.800×5.88×106+0.800×2.52×106+0.200×1.08×106=6.936×106  ⟹  q′=2.448×106/(2×6.936×106)=0.176N_{FF} = 0.490 \times 1.20 \times 10^7 = 5.88 \times 10^6 \implies \text{Surviving individuals} = 0.800 \times 5.88 \times 10^6 + 0.800 \times 2.52 \times 10^6 + 0.200 \times 1.08 \times 10^6 = 6.936 \times 10^6 \implies q' = 2.448 \times 10^6 / (2 \times 6.936 \times 10^6) = 0.176

    Correct

    q′=f(FS)wFS+2f(SS)wSS2wˉ=0.420(0.800)+2(0.090)(0.200)2(0.746)=0.3721.492≈0.247q' = \frac{f(FS)w_{FS} + 2f(SS)w_{SS}}{2\bar{w}} = \frac{0.420(0.800) + 2(0.090)(0.200)}{2(0.746)} = \frac{0.372}{1.492} \approx 0.247

    Your post-selection allele frequency formula was conceptually sound, but the result was skewed by the incorrect initial heterozygote census count.

WHAT YOU DID WELL
Compliments from Your Teacher

You calculated the total initial census population accurately from reservoir volume and organism density.

You correctly identified the alternate allele frequency p=1−q=0.700p = 1 - q = 0.700.

You correctly accounted for homozygotes having two copies of the allele when tallying gene copies.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Heterozygote Multiplier (2pq)

You wrote f(FS)=pqf(FS) = pq instead of f(FS)=2pqf(FS) = 2pq when calculating the number of heterozygotes.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the probability of a single ordered gamete combination (p×qp \times q) with the total frequency of diploid heterozygous genotypes, which requires summing both reciprocal pairings (pq+qp=2pqpq + qp = 2pq).

REASONING PATH
Your ACEpath teacher’s suggested approach
Hardy-Weinberg Genotype Sum Check
  • For any biallelic locus in Hardy-Weinberg equilibrium, p2+2pq+q2=1.0p^2 + 2pq + q^2 = 1.0.

  • Always verify that your genotype frequencies sum to 1.01.0. Notice that 0.490+0.210+0.090=0.790≠1.00.490 + 0.210 + 0.090 = 0.790 \neq 1.0, which immediately signals a missing factor of 22.

Heterozygote Frequency Multiplier
  • Heterozygotes receive one allele from each parent: f(A1A2)=2p1p2f(A_1 A_2) = 2p_1 p_2.

  • Multiply the product of the two allele frequencies by 22 whenever counting heterozygotes.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute the correct heterozygote count: NFS=2pq×N0=2(0.700)(0.300)(1.20×107)=5.04×106 individualsN_{FS} = 2pq \times N_0 = 2(0.700)(0.300)(1.20 \times 10^7) = 5.04 \times 10^6\text{ individuals}.

  2. Calculate the selective reduction in SS alleles due to excess mortality in SSSS relative to the 80.0%80.0\% baseline: Δw=0.800−0.200=0.600\Delta w = 0.800 - 0.200 = 0.600, giving ΔNS=2×NSS×Δw=2(1.08×106)(0.600)=1.296×106 alleles\Delta N_S = 2 \times N_{SS} \times \Delta w = 2(1.08 \times 10^6)(0.600) = 1.296 \times 10^6\text{ alleles}.

  3. Determine mean population fitness: wˉ=(0.490)(0.800)+(0.420)(0.800)+(0.090)(0.200)=0.392+0.336+0.018=0.746\bar{w} = (0.490)(0.800) + (0.420)(0.800) + (0.090)(0.200) = 0.392 + 0.336 + 0.018 = 0.746.

  4. Calculate post-selection allele frequency: q′=f(FS)wFS+2f(SS)wSS2wˉ=(0.420)(0.800)+2(0.090)(0.200)2(0.746)=0.3721.492≈0.247q' = \frac{f(FS)w_{FS} + 2f(SS)w_{SS}}{2\bar{w}} = \frac{(0.420)(0.800) + 2(0.090)(0.200)}{2(0.746)} = \frac{0.372}{1.492} \approx 0.247.

Final answer

(a) 1.20×107 individuals1.20 \times 10^7\text{ individuals}; (b) 1.296×106 alleles1.296 \times 10^6\text{ alleles}; (c) q′≈0.247q' \approx 0.247

NEXT STEPS
Final Takeaways from Your Teacher
  • Check that genotype frequencies sum to 11 before multiplying by population size.

  • Practice identifying whether mortality questions ask for total allele deaths or selective excess mortality relative to the baseline genotype.

  • Solve three targeted practice problems reinforcing the 2pq2pq rule and post-selection allele frequency calculations.

Lock it in

Similar question

01

A diploid plant population has 400400 individuals: 100100 RRRR, 200200 RrRr, and 100100 rrrr. A selective herbicide kills 50%50\% of rrrr homozygotes but none of the other genotypes. What is the post-selection frequency of the rr allele?

Answer

q′=37≈0.429q' = \frac{3}{7} \approx 0.429. Surviving counts are 100100 RRRR, 200200 RrRr, and 5050 rrrr (350350 total plants, 700700 total alleles). Total surviving rr alleles = 200(1)+50(2)=300200(1) + 50(2) = 300. Thus, q′=300700=37≈0.429q' = \frac{300}{700} = \frac{3}{7} \approx 0.429.

02

In an insect population of 1,0001{,}000 diploid individuals at Hardy-Weinberg equilibrium with q0=f(b)=0.40q_0 = f(b) = 0.40, an insecticide treatment results in survivorship of 1.001.00 for BBBB, 1.001.00 for BbBb, and 0.250.25 for bbbb. Calculate: (a) the number of surviving bb alleles, and (b) the new allele frequency q′q' to three decimal places.

Answer

(a) 560560 bb alleles; (b) q′≈0.318q' \approx 0.318. Initial counts: NBB=360N_{BB} = 360, NBb=480N_{Bb} = 480, Nbb=160N_{bb} = 160. Surviving individuals: 360360 BBBB, 480480 BbBb, and 4040 bbbb (880880 total survivors, 1,7601{,}760 gene copies). Surviving bb alleles = 480(1)+40(2)=560480(1) + 40(2) = 560. Frequency q′=5601760≈0.318q' = \frac{560}{1760} \approx 0.318.

03

A population of 10,00010{,}000 diploid marine snails has allele frequencies p(A)=0.60p(A) = 0.60 and q(a)=0.40q(a) = 0.40. Thermal stress reduces survivorship to wAA=0.90w_{AA} = 0.90, wAa=0.90w_{Aa} = 0.90, and waa=0.40w_{aa} = 0.40. Determine: (1) the absolute number of aa alleles lost due to mortality, and (2) the change in allele frequency Δq=q′−q0\Delta q = q' - q_0.

Answer

(1) 2,4002{,}400 aa alleles lost; (2) Δq≈−0.052\Delta q \approx -0.052. Initial counts: NAa=4,800N_{Aa} = 4{,}800, Naa=1,600N_{aa} = 1{,}600. Deaths: 0.10×4,800=4800.10 \times 4{,}800 = 480 AaAa, and 0.60×1,600=9600.60 \times 1{,}600 = 960 aaaa. Lost aa alleles = 480(1)+960(2)=2,400480(1) + 960(2) = 2{,}400. Surviving aa alleles = 8,000−2,400=5,6008{,}000 - 2{,}400 = 5{,}600. Surviving total population = 0.90(3,600)+0.90(4,800)+0.40(1,600)=8,2000.90(3{,}600) + 0.90(4{,}800) + 0.40(1{,}600) = 8{,}200 individuals (16,40016{,}400 alleles). New frequency q′=5,60016,400≈0.348q' = \frac{5{,}600}{16{,}400} \approx 0.348, so Δq=0.348−0.400=−0.052\Delta q = 0.348 - 0.400 = -0.052.

Loading workspace…