Resources

An activated macrophage engages in receptor-mediated endocytosis to ingest low-density lipoprotein (LDL) particles, after which endosomes fuse with lysosomes to form endolysosomes. To acidify the lumen from the initial endosomal pHi=7.20\text{pH}_i = 7.20 to the degradative lysosomal pHf=4.80\text{pH}_f = 4.80, vacuolar H+\text{H}^+-ATPases (V-ATPases) actively import protons. Consider a spherical lysosome of radius r=0.500 μmr = 0.500\ \mu\text{m} possessing an internal buffering capacity of β=25.0 mM/pH unit\beta = 25.0\text{ mM}/\text{pH unit} (where β=d[H+]totaldpH\beta = \frac{d[\text{H}^+]_{\text{total}}}{d\text{pH}}, meaning 25.0 mmol25.0\text{ mmol} of total H+\text{H}^+ per liter of vesicle volume must be actively pumped to drop the internal pH by 1.001.00 unit). Assuming the V-ATPase consumes 1 mol1\text{ mol} of ATP\text{ATP} per 2 mol2\text{ mol} of H+\text{H}^+ transported: (a) calculate the total number of H+\text{H}^+ ions that must be pumped into the lysosome to achieve this acidification, and (b) calculate the total number of ATP\text{ATP} molecules hydrolyzed by the V-ATPases.

Answer and steps

Final answer

(a) 1.89×107 H+ ions1.89 \times 10^7\text{ H}^+\text{ ions}; (b) 9.47×106 ATP molecules9.47 \times 10^6\text{ ATP molecules}

Steps

01

Calculate the internal volume of the lysosome

The lysosome is modeled as a sphere of radius r=0.500 μmr = 0.500\ \mu\text{m}.

First, convert the radius to centimeters or meters to determine the volume in liters: r=0.500 μm=5.00×10−5 cmr = 0.500\ \mu\text{m} = 5.00 \times 10^{-5}\text{ cm}

Using the formula for the volume of a sphere, V=43πr3V = \frac{4}{3}\pi r^3: V=43π(5.00×10−5 cm)3=43π(1.25×10−13 cm3)≈5.236×10−14 cm3V = \frac{4}{3}\pi (5.00 \times 10^{-5}\text{ cm})^3 = \frac{4}{3}\pi (1.25 \times 10^{-13}\text{ cm}^3) \approx 5.236 \times 10^{-14}\text{ cm}^3

Since 1 cm3=1 mL=10−3 L1\text{ cm}^3 = 1\text{ mL} = 10^{-3}\text{ L}: V≈5.236×10−16 LV \approx 5.236 \times 10^{-16}\text{ L}


02

Determine the total concentration of HX+\ce{H+} ions required

The pH drop required for lumen acidification is: ΔpH=pHi−pHf=7.20−4.80=2.40 pH units\Delta\text{pH} = \text{pH}_i - \text{pH}_f = 7.20 - 4.80 = 2.40\text{ pH units}

Common Pitfall: A frequent mistake is calculating only the difference in free proton concentration, Δ[HX+]free=10−4.80−10−7.20≈1.58×10−5 M\Delta[\ce{H+}]_{\text{free}} = 10^{-4.80} - 10^{-7.20} \approx 1.58 \times 10^{-5}\text{ M}. In biological compartments, luminal proteins, lipids, and metabolites act as extensive buffers. The buffering capacity β\beta dictates the total number of protons that must be imported to effect a given pH shift.

Using the buffering capacity β=25.0 mM/pH unit\beta = 25.0\text{ mM}/\text{pH unit}: [HX+]total=β⋅ΔpH=25.0 mM/pH unit⋅2.40 pH units=60.0 mM=6.00×10−2 mol/L[\ce{H+}]_{\text{total}} = \beta \cdot \Delta\text{pH} = 25.0\text{ mM}/\text{pH unit} \cdot 2.40\text{ pH units} = 60.0\text{ mM} = 6.00 \times 10^{-2}\text{ mol/L}


03

Calculate the total number of pumped HX+\ce{H+} ions (Part a)

Multiply the required molar concentration of protons by the lysosomal volume to find the total moles of HX+\ce{H+}: n(HX+)=[HX+]total⋅V=(6.00×10−2 mol/L)⋅(5.236×10−16 L)≈3.142×10−17 moln(\ce{H+}) = [\ce{H+}]_{\text{total}} \cdot V = (6.00 \times 10^{-2}\text{ mol/L}) \cdot (5.236 \times 10^{-16}\text{ L}) \approx 3.142 \times 10^{-17}\text{ mol}

Multiply by Avogadro's number (NA≈6.022×1023 ions/molN_A \approx 6.022 \times 10^{23}\text{ ions/mol}) to obtain the total number of HX+\ce{H+} ions: N(HX+)=n(HX+)⋅NA=(3.142×10−17 mol)⋅(6.022×1023 ions/mol)≈1.89×107 H+ ionsN(\ce{H+}) = n(\ce{H+}) \cdot N_A = (3.142 \times 10^{-17}\text{ mol}) \cdot (6.022 \times 10^{23}\text{ ions/mol}) \approx 1.89 \times 10^7\text{ H}^+\text{ ions}


04

Calculate the total number of ATP\text{ATP} molecules hydrolyzed (Part b)

The vacuolar HX+\ce{H+}-ATPase operates with a stoichiometry of 1 ATP1\text{ ATP} hydrolyzed per 2 H+2\text{ H}^+ ions transported: Stoichiometric ratio=1 ATP molecule2 H+ ions\text{Stoichiometric ratio} = \frac{1\text{ ATP molecule}}{2\text{ H}^+\text{ ions}}

Therefore, the total number of ATP\text{ATP} molecules consumed is: N(ATP)=N(HX+)2=1.89×107 H+ ions2≈9.47×106 ATP moleculesN(\text{ATP}) = \frac{N(\ce{H+})}{2} = \frac{1.89 \times 10^7\text{ H}^+\text{ ions}}{2} \approx 9.47 \times 10^6\text{ ATP molecules}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student ignores the buffering capacity and calculates proton accumulation based solely on the change in free hydrogen ion concentration.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    V=43⋅π⋅(0.500×10−6 m)3=5.236×10−19 m3=5.236×10−16 LV = \frac{4}{3} \cdot \pi \cdot (0.500 \times 10^{-6}\text{ m})^3 = 5.236 \times 10^{-19}\text{ m}^3 = 5.236 \times 10^{-16}\text{ L}

  2. Step 2

    [HX+]i=10−7.20=6.31×10−8 M  ⟹  [HX+]f=10−4.80=1.58×10−5 M  ⟹  Δ[HX+]=1.58×10−5 M−6.31×10−8 M=1.58×10−5 M[\ce{H+}]_i = 10^{-7.20} = 6.31 \times 10^{-8}\text{ M} \implies [\ce{H+}]_f = 10^{-4.80} = 1.58 \times 10^{-5}\text{ M} \implies \Delta[\ce{H+}] = 1.58 \times 10^{-5}\text{ M} - 6.31 \times 10^{-8}\text{ M} = 1.58 \times 10^{-5}\text{ M}

    Correct

    [HX+]total=β⋅ΔpH=(25.0 mM/pH unit)⋅(7.20−4.80)=60.0 mM=6.00×10−2 mol/L[\ce{H+}]_{\text{total}} = \beta \cdot \Delta\text{pH} = (25.0\text{ mM/pH unit}) \cdot (7.20 - 4.80) = 60.0\text{ mM} = 6.00 \times 10^{-2}\text{ mol/L}

    You calculated the change in free [HX+][\ce{H+}], but biological organelles contain abundant luminal buffers. The total concentration of protons that must be pumped is governed by the buffering capacity: [HX+]total=β⋅ΔpH[\ce{H+}]_{\text{total}} = \beta \cdot \Delta\text{pH}.

  3. Step 3

    Total HX+=1.58×10−5 mol/L⋅5.236×10−16 L⋅6.022×1023 ions/mol=4.98×103 H+ ions\text{Total }\ce{H+} = 1.58 \times 10^{-5}\text{ mol/L} \cdot 5.236 \times 10^{-16}\text{ L} \cdot 6.022 \times 10^{23}\text{ ions/mol} = 4.98 \times 10^3\text{ H}^+\text{ ions}

    Correct

    N(HX+)=[HX+]total⋅V⋅NA=(6.00×10−2 mol/L)⋅(5.236×10−16 L)⋅(6.022×1023 ions/mol)=1.89×107 H+ ionsN(\ce{H+}) = [\ce{H+}]_{\text{total}} \cdot V \cdot N_A = (6.00 \times 10^{-2}\text{ mol/L}) \cdot (5.236 \times 10^{-16}\text{ L}) \cdot (6.022 \times 10^{23}\text{ ions/mol}) = 1.89 \times 10^7\text{ H}^+\text{ ions}

    Your conversion method from molarity to total number of ions was correct, but the result was thrown off by using the free [HX+][\ce{H+}] value from Step 2.

  4. Step 4

    ATP molecules=4.98×103 H+2=2.49×103 ATP molecules\text{ATP molecules} = \frac{4.98 \times 10^3\text{ H}^+}{2} = 2.49 \times 10^3\text{ ATP molecules}

    Correct

    N(ATP)=N(HX+)2=1.89×1072=9.47×106 ATP moleculesN(\text{ATP}) = \frac{N(\ce{H+})}{2} = \frac{1.89 \times 10^7}{2} = 9.47 \times 10^6\text{ ATP molecules}

    You correctly applied the 1 ATP:2 H+1\text{ ATP} : 2\text{ H}^+ transport stoichiometry, but your value propagates the error from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately determined the volume of the spherical lysosome in liters.

You used the correct stoichiometric ratio of 1 ATP1\text{ ATP} hydrolyzed per 2 H+2\text{ H}^+ transported.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Free vs. Buffered Proton Misconception

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the organelle interior as unbuffered pure water where pH depends only on free [HX+][\ce{H+}], omitting the luminal buffering capacity β\beta which requires orders of magnitude more protons to achieve the same pH drop.

REASONING PATH
Your ACEpath teacher’s suggested approach
Account for Buffering Capacity in Organelles
  • In buffered cellular compartments, the total protons needed to lower pH by ΔpH\Delta\text{pH} is [HX+]total=β⋅ΔpH[\ce{H+}]_{\text{total}} = \beta \cdot \Delta\text{pH}, not Δ[HX+]free\Delta[\ce{H+}]_{\text{free}}.

  • Always check whether a buffering capacity β\beta is given before calculating proton requirements from 10−pH10^{-\text{pH}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the pH change: ΔpH=7.20−4.80=2.40 pH units\Delta\text{pH} = 7.20 - 4.80 = 2.40\text{ pH units}.

  2. Find the total proton concentration required: [HX+]total=β⋅ΔpH=25.0 mM/pH unit⋅2.40=60.0 mM=6.00×10−2 mol/L[\ce{H+}]_{\text{total}} = \beta \cdot \Delta\text{pH} = 25.0\text{ mM/pH unit} \cdot 2.40 = 60.0\text{ mM} = 6.00 \times 10^{-2}\text{ mol/L}.

  3. Compute the total moles of protons: n(HX+)=(6.00×10−2 mol/L)⋅(5.236×10−16 L)=3.142×10−17 moln(\ce{H+}) = (6.00 \times 10^{-2}\text{ mol/L}) \cdot (5.236 \times 10^{-16}\text{ L}) = 3.142 \times 10^{-17}\text{ mol}.

  4. Multiply by Avogadro's number: N(HX+)=3.142×10−17 mol⋅6.022×1023 ions/mol=1.89×107 H+ ionsN(\ce{H+}) = 3.142 \times 10^{-17}\text{ mol} \cdot 6.022 \times 10^{23}\text{ ions/mol} = 1.89 \times 10^7\text{ H}^+\text{ ions}.

  5. Divide by the transport ratio (2 H+/ATP2\text{ H}^+/\text{ATP}): N(ATP)=1.89×1072=9.47×106 ATP moleculesN(\text{ATP}) = \frac{1.89 \times 10^7}{2} = 9.47 \times 10^6\text{ ATP molecules}.

Final answer

(a) 1.89×107 H+ ions1.89 \times 10^7\text{ H}^+\text{ ions}; (b) 9.47×106 ATP molecules9.47 \times 10^6\text{ ATP molecules}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice distinguishing between free proton concentration [HX+]=10−pH[\ce{H+}] = 10^{-\text{pH}} and total buffered proton exchange Δ[HX+]total=β⋅ΔpH\Delta[\ce{H+}]_{\text{total}} = \beta \cdot \Delta\text{pH}.

  • Review physiological organelle acidification problems involving the vacuolar HX+\ce{H+}-ATPase.

OverviewACEpath Teacher's Diagnosis

02 The student inverts the transport stoichiometry, multiplying the number of pumped protons by 2 instead of dividing by 2.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    V=43π(0.500×10−4 cm)3=5.236×10−16 LV = \frac{4}{3}\pi (0.500 \times 10^{-4}\text{ cm})^3 = 5.236 \times 10^{-16}\text{ L}

  2. Step 2

    ΔpH=7.20−4.80=2.40  ⟹  Δ[H+]total=25.0 mM×2.40=60.0 mM=0.0600 mol/L\Delta\text{pH} = 7.20 - 4.80 = 2.40 \implies \Delta[\text{H}^+]_{\text{total}} = 25.0\text{ mM} \times 2.40 = 60.0\text{ mM} = 0.0600\text{ mol/L}

  3. Step 3

    Total H+=0.0600 mol/L×5.236×10−16 L×6.022×1023 ions/mol=1.89×107 H+ ions\text{Total } \text{H}^+ = 0.0600\text{ mol/L} \times 5.236 \times 10^{-16}\text{ L} \times 6.022 \times 10^{23}\text{ ions/mol} = 1.89 \times 10^7\text{ H}^+\text{ ions}

  4. Step 4

    N(ATP)=1.89×107×2=3.78×107 ATP moleculesN(\text{ATP}) = 1.89 \times 10^7 \times 2 = 3.78 \times 10^7\text{ ATP molecules}

    Correct

    N(ATP)=N(H+)2=1.89×1072=9.47×106 ATP moleculesN(\text{ATP}) = \frac{N(\text{H}^+)}{2} = \frac{1.89 \times 10^7}{2} = 9.47 \times 10^6\text{ ATP molecules}

    Because each hydrolyzed ATP\text{ATP} transports 2 H+2\text{ H}^+ ions, fewer ATP\text{ATP} molecules are needed than H+\text{H}^+ ions; you should divide the number of protons by 22 rather than multiply.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the spherical volume of the lysosome in liters.

You used the luminal buffering capacity rather than relying only on free proton concentration.

You correctly determined the total number of protons required for Part a.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted transport stoichiometry

You set up the ratio upside down in the final calculation, multiplying by the stoichiometric coefficient instead of dividing.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the direction of dimensional cancellation when converting between transported substrate ions and hydrolyzed energy molecules.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Stoichiometry Check
  • Always write conversion factors with explicit units: ions×(1 ATP2 H+)=ATP molecules\text{ions} \times \left(\frac{1\text{ ATP}}{2\text{ H}^+}\right) = \text{ATP molecules}.

  • Ensure the unwanted unit cancels out in the denominator.

Sanity Check on Ion-to-ATP Ratio
  • If one pump cycle moves multiple ions per single ATP\text{ATP}, the total count of ATP\text{ATP} molecules consumed must be strictly less than the count of ions moved.

  • Compare your final counts to make sure N(ATP)<N(H+)N(\text{ATP}) < N(\text{H}^+) when the stoichiometry is >1 H+/ATP> 1\text{ H}^+/\text{ATP}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the given transport stoichiometry: 1 molecule of ATP1\text{ molecule of ATP} hydrolyzes to pump 2 H+ ions2\text{ H}^+\text{ ions}.

  2. Set up dimensional analysis: N(ATP)=1.89×107 H+ ions×1 ATP2 H+ ionsN(\text{ATP}) = 1.89 \times 10^7\text{ H}^+\text{ ions} \times \frac{1\text{ ATP}}{2\text{ H}^+\text{ ions}}.

  3. Divide to find the final quantity: N(ATP)=9.47×106 ATP moleculesN(\text{ATP}) = 9.47 \times 10^6\text{ ATP molecules}.

Final answer

(a) 1.89×107 H+ ions1.89 \times 10^7\text{ H}^+\text{ ions}; (b) 9.47×106 ATP molecules9.47 \times 10^6\text{ ATP molecules}

NEXT STEPS
Final Takeaways from Your Teacher
  • Include explicit units in intermediate conversion steps to avoid multiplying instead of dividing.

  • Do a quick magnitude sanity check: verify whether you expect more or fewer ATP molecules than transported ions.

OverviewACEpath Teacher's Diagnosis

03 The student miscalculates the volume of the sphere by omitting the factor of 4/3 from the sphere volume formula.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    V=π⋅r3=π⋅(5.00×10−5 cm)3=3.927×10−13 cm3=3.927×10−16 LV = \pi \cdot r^3 = \pi \cdot (5.00 \times 10^{-5}\text{ cm})^3 = 3.927 \times 10^{-13}\text{ cm}^3 = 3.927 \times 10^{-16}\text{ L}

    Correct

    V=43πr3=43π(5.00×10−5 cm)3≈5.236×10−14 cm3=5.236×10−16 LV = \frac{4}{3}\pi r^3 = \frac{4}{3}\pi (5.00 \times 10^{-5}\text{ cm})^3 \approx 5.236 \times 10^{-14}\text{ cm}^3 = 5.236 \times 10^{-16}\text{ L}

    You calculated the volume using V=πr3V = \pi r^3 instead of the geometric formula for a sphere, V=43πr3V = \frac{4}{3}\pi r^3. Missing the factor of 43\frac{4}{3} resulted in an underestimated volume.

  2. Step 2

    ΔpH=7.20−4.80=2.40  ⟹  Δ[H+]total=25.0 mM⋅2.40=60.0 mM=0.0600 mol/L\Delta\text{pH} = 7.20 - 4.80 = 2.40 \implies \Delta[\text{H}^+]_{\text{total}} = 25.0\text{ mM} \cdot 2.40 = 60.0\text{ mM} = 0.0600\text{ mol/L}

  3. Step 3

    Total H+=0.0600 mol/L⋅3.927×10−16 L⋅6.022×1023 ions/mol=1.42×107 H+ ions\text{Total H}^+ = 0.0600\text{ mol/L} \cdot 3.927 \times 10^{-16}\text{ L} \cdot 6.022 \times 10^{23}\text{ ions/mol} = 1.42 \times 10^7\text{ H}^+\text{ ions}

    Correct

    N(H+)=(0.0600 mol/L)⋅(5.236×10−16 L)⋅(6.022×1023 ions/mol)≈1.89×107 H+ ionsN(\text{H}^+) = (0.0600\text{ mol/L}) \cdot (5.236 \times 10^{-16}\text{ L}) \cdot (6.022 \times 10^{23}\text{ ions/mol}) \approx 1.89 \times 10^7\text{ H}^+\text{ ions}

    Your method of multiplying concentration by volume and Avogadro's number is entirely correct, but the numerical answer is off due to the volume calculated in Step 1.

  4. Step 4

    ATP molecules=1.42×1072=7.10×106 ATP molecules\text{ATP molecules} = \frac{1.42 \times 10^7}{2} = 7.10 \times 10^6\text{ ATP molecules}

    Correct

    N(ATP)=1.89×1072≈9.47×106 ATP moleculesN(\text{ATP}) = \frac{1.89 \times 10^7}{2} \approx 9.47 \times 10^6\text{ ATP molecules}

    You correctly applied the 2:12:1 stoichiometry of proton transport to ATP hydrolysis, but the value is affected by the earlier volume error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used buffering capacity rather than free proton concentration to find the total required protons.

You converted units from cubic centimeters to liters accurately.

You correctly applied Avogadro's constant to convert moles to individual ions.

You applied the 1 ATP:2 H+1\text{ ATP} : 2\text{ H}^+ transport stoichiometry accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Sphere Volume Factor

You used V=πr3V = \pi r^3 instead of V=43πr3V = \frac{4}{3}\pi r^3 when calculating the internal volume of the spherical lysosome.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating geometric formulas or accidentally dropping fractional coefficients when setting up geometric calculations in biophysical problems.

REASONING PATH
Your ACEpath teacher’s suggested approach
Sphere Volume Formula
  • V=43πr3V = \frac{4}{3}\pi r^3 for any sphere of radius rr.

  • Write down the standard formula V=43πr3V = \frac{4}{3}\pi r^3 explicitly before substituting numerical values.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute r=5.00×10−5 cmr = 5.00 \times 10^{-5}\text{ cm} into V=43πr3V = \frac{4}{3}\pi r^3: V=43π(5.00×10−5 cm)3≈5.236×10−14 cm3=5.236×10−16 LV = \frac{4}{3}\pi (5.00 \times 10^{-5}\text{ cm})^3 \approx 5.236 \times 10^{-14}\text{ cm}^3 = 5.236 \times 10^{-16}\text{ L}.

  2. Calculate total protons: N(H+)=(0.0600 mol/L)⋅(5.236×10−16 L)⋅(6.022×1023 ions/mol)≈1.89×107 H+ ionsN(\text{H}^+) = (0.0600\text{ mol/L}) \cdot (5.236 \times 10^{-16}\text{ L}) \cdot (6.022 \times 10^{23}\text{ ions/mol}) \approx 1.89 \times 10^7\text{ H}^+\text{ ions}.

  3. Calculate hydrolyzed ATP: N(ATP)=1.89×1072≈9.47×106 ATP moleculesN(\text{ATP}) = \frac{1.89 \times 10^7}{2} \approx 9.47 \times 10^6\text{ ATP molecules}.

Final answer

(a) 1.89×107 H+ ions1.89 \times 10^7\text{ H}^+\text{ ions}; (b) 9.47×106 ATP molecules9.47 \times 10^6\text{ ATP molecules}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check standard geometric formulas before beginning numerical substitutions.

  • Remember that a sphere's volume contains the prefactor 43\frac{4}{3} and radius cubed, while surface area contains 4πr24\pi r^2.

Lock it in

Similar question

01

A synaptic vesicle has an internal volume of 4.00×10−20 L4.00 \times 10^{-20}\text{ L} and a buffering capacity of β=20.0 mM/pH unit\beta = 20.0\text{ mM/pH unit}. How many total HX+\ce{H+} ions must be imported to lower the pH by 1.501.50 units?

Answer

723 H+ ions723\text{ H}^+\text{ ions}. Key steps: [HX+]total=β⋅ΔpH=20.0 mM⋅1.50=30.0 mM=0.0300 mol/L[\ce{H+}]_{\text{total}} = \beta \cdot \Delta\text{pH} = 20.0\text{ mM} \cdot 1.50 = 30.0\text{ mM} = 0.0300\text{ mol/L}. Moles of HX+=0.0300 mol/L⋅4.00×10−20 L=1.20×10−21 mol\ce{H+} = 0.0300\text{ mol/L} \cdot 4.00 \times 10^{-20}\text{ L} = 1.20 \times 10^{-21}\text{ mol}. Number of ions =1.20×10−21 mol⋅6.022×1023 ions/mol≈723 ions= 1.20 \times 10^{-21}\text{ mol} \cdot 6.022 \times 10^{23}\text{ ions/mol} \approx 723\text{ ions}.

02

A secretory granule has a volume of 1.00×10−16 L1.00 \times 10^{-16}\text{ L} and an internal buffering capacity of β=40.0 mM/pH unit\beta = 40.0\text{ mM/pH unit}. A V-ATPase with a stoichiometry of 2 H+2\text{ H}^+ per 1 ATP1\text{ ATP} acidifies the granule from pH 7.00\text{pH } 7.00 to pH 5.50\text{pH } 5.50. Calculate the total number of ATP molecules consumed.

Answer

1.81×106 ATP molecules1.81 \times 10^6\text{ ATP molecules}. Key steps: ΔpH=1.50\Delta\text{pH} = 1.50. [HX+]total=40.0 mM⋅1.50=60.0 mM=0.060 mol/L[\ce{H+}]_{\text{total}} = 40.0\text{ mM} \cdot 1.50 = 60.0\text{ mM} = 0.060\text{ mol/L}. Moles of HX+=0.060 mol/L⋅1.00×10−16 L=6.00×10−18 mol\ce{H+} = 0.060\text{ mol/L} \cdot 1.00 \times 10^{-16}\text{ L} = 6.00 \times 10^{-18}\text{ mol}. Ions of HX+=6.00×10−18⋅6.022×1023≈3.613×106 ions\ce{H+} = 6.00 \times 10^{-18} \cdot 6.022 \times 10^{23} \approx 3.613 \times 10^6\text{ ions}. ATP required =3.613×1062≈1.81×106 molecules= \frac{3.613 \times 10^6}{2} \approx 1.81 \times 10^6\text{ molecules}.

03

An endosome with a radius of 0.200 μm0.200\ \mu\text{m} acidifies from pH 7.40\text{pH } 7.40 to pH 6.00\text{pH } 6.00. If the V-ATPase hydrolyzes 3.50×105 ATP3.50 \times 10^5\text{ ATP} molecules during this process (at 2 H+/ATP2\text{ H}^+/\text{ATP}), determine the effective internal buffering capacity β\beta of the endosome in mM/pH unit\text{mM/pH unit}.

Answer

24.9 mM/pH unit24.9\text{ mM/pH unit}. Key steps: Total HX+\ce{H+} pumped =2×(3.50×105)=7.00×105 ions=1.162×10−18 mol= 2 \times (3.50 \times 10^5) = 7.00 \times 10^5\text{ ions} = 1.162 \times 10^{-18}\text{ mol}. Vesicle volume V=43π(2.00×10−5 cm)3=3.351×10−14 cm3=3.351×10−17 LV = \frac{4}{3}\pi (2.00 \times 10^{-5}\text{ cm})^3 = 3.351 \times 10^{-14}\text{ cm}^3 = 3.351 \times 10^{-17}\text{ L}. [HX+]total=1.162×10−18 mol3.351×10−17 L=0.03468 mol/L=34.68 mM[\ce{H+}]_{\text{total}} = \frac{1.162 \times 10^{-18}\text{ mol}}{3.351 \times 10^{-17}\text{ L}} = 0.03468\text{ mol/L} = 34.68\text{ mM}. With ΔpH=1.40\Delta\text{pH} = 1.40, β=[HX+]totalΔpH=34.68 mM1.40≈24.9 mM/pH unit\beta = \frac{[\ce{H+}]_{\text{total}}}{\Delta\text{pH}} = \frac{34.68\text{ mM}}{1.40} \approx 24.9\text{ mM/pH unit}.

Loading workspace…