Resources

An agricultural geneticist sequences the nuclear genome of a diploid crop plant (2n=142n = 14). The total haploid nuclear genome length is measured to be 4.90×108 base pairs (bp)4.90 \times 10^8\text{ base pairs (bp)}. High-throughput bioinformatic analysis annotates 28,00028{,}000 protein-coding genes distributed across the chromosomes. The average protein-coding gene in this species contains an open reading frame and regulatory regions spanning 3,500 bp3{,}500\text{ bp} of primary genomic DNA. Calculate: (a) The average chromosome physical length in megabase pairs (Mb\text{Mb}) per haploid set. (b) The mean gene density expressed as the average number of genes per megabase (genes/Mb\text{genes/Mb}). (c) The percentage of the haploid nuclear genome that corresponds directly to these annotated gene loci.

Answer and steps

Final answer

(a) 70.0 Mb70.0\text{ Mb}; (b) 57.1 genes/Mb57.1\text{ genes/Mb}; (c) 20.0%20.0\%.

Steps

01

Determine the haploid chromosome number and genome size in megabases

  • Chromosome number per haploid set (nn):
    The plant is diploid with 2n=142n = 14. Therefore, the haploid set consists of: n=142=7 chromosomesn = \frac{14}{2} = 7\text{ chromosomes}
  • Haploid genome size in megabase pairs (Mb\text{Mb}):
    Recall that 1 Mb=106 bp1\text{ Mb} = 10^6\text{ bp}. Converting the total haploid genome length: Genome size=4.90×108 bp106 bp/Mb=490 Mb\text{Genome size} = \frac{4.90 \times 10^8\text{ bp}}{10^6\text{ bp/Mb}} = 490\text{ Mb}

Common Pitfall: Do not divide the haploid genome size by the diploid chromosome number (2n=142n = 14). A haploid genome measurement represents one complete set of n=7n = 7 chromosomes.


02

(a) Calculate the average chromosome length

Assuming the DNA is distributed evenly across all chromosomes in the haploid set: Average chromosome length=Total haploid genome sizen=490 Mb7=70.0 Mb\text{Average chromosome length} = \frac{\text{Total haploid genome size}}{n} = \frac{490\text{ Mb}}{7} = 70.0\text{ Mb}


03

(b) Calculate the mean gene density

Gene density measures how many genes are found per unit length of genomic DNA: Gene density=Total annotated genesTotal haploid genome size in Mb=28,000 genes490 Mb≈57.14 genes/Mb\text{Gene density} = \frac{\text{Total annotated genes}}{\text{Total haploid genome size in Mb}} = \frac{28{,}000\text{ genes}}{490\text{ Mb}} \approx 57.14\text{ genes/Mb}

Rounding to three significant figures gives: Gene density≈57.1 genes/Mb\text{Gene density} \approx 57.1\text{ genes/Mb}


04

(c) Calculate the proportion of genomic DNA within gene loci

  1. Calculate the total span of all annotated gene loci: Total gene span=28,000 genes×3,500 bp/gene=9.80×107 bp=98.0 Mb\text{Total gene span} = 28{,}000\text{ genes} \times 3{,}500\text{ bp/gene} = 9.80 \times 10^7\text{ bp} = 98.0\text{ Mb}
  2. Calculate the percentage of the haploid genome occupied by genes: Percentage=(Total gene spanTotal haploid genome size)×100%\text{Percentage} = \left( \frac{\text{Total gene span}}{\text{Total haploid genome size}} \right) \times 100\% Percentage=(9.80×107 bp4.90×108 bp)×100%=20.0%\text{Percentage} = \left( \frac{9.80 \times 10^7\text{ bp}}{4.90 \times 10^8\text{ bp}} \right) \times 100\% = 20.0\%

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student divides the haploid genome size by the diploid chromosome number 2n = 14 instead of the haploid number n = 7, halving the average chromosome length to 35 Mb.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Haploid genome=4.90×108 bp=490 Mb  ⟹  Chromosomes=14  ⟹  Average length=490 Mb/14=35 Mb\text{Haploid genome} = 4.90 \times 10^8\text{ bp} = 490\text{ Mb} \implies \text{Chromosomes} = 14 \implies \text{Average length} = 490\text{ Mb} / 14 = 35\text{ Mb}

    Correct

    Haploid chromosomes n=142=7  ⟹  Average length=490 Mb7=70.0 Mb\text{Haploid chromosomes } n = \frac{14}{2} = 7 \implies \text{Average length} = \frac{490\text{ Mb}}{7} = 70.0\text{ Mb}

    You converted the base pairs to megabases correctly as 490 Mb490\text{ Mb}. However, because the genome size given is for the haploid set, you must divide by the haploid chromosome number (n=7n = 7), not the diploid number (2n=142n = 14).

  2. Step 2

    Gene density=28000/490 Mb  ⟹  Gene density=57.1 genes/Mb\text{Gene density} = 28000 / 490\text{ Mb} \implies \text{Gene density} = 57.1\text{ genes/Mb}

  3. Step 3

    Total gene DNA=28000×3500 bp=9.8×107 bp  ⟹  Percentage=(9.8×107/4.90×108)×100%  ⟹  Percentage=20%\text{Total gene DNA} = 28000 \times 3500\text{ bp} = 9.8 \times 10^7\text{ bp} \implies \text{Percentage} = \left(9.8 \times 10^7 / 4.90 \times 10^8\right) \times 100\% \implies \text{Percentage} = 20\%

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately converted genomic base pairs into megabases (1 Mb=106 bp1\text{ Mb} = 10^6\text{ bp}).

You set up and evaluated the gene density calculation correctly with appropriate units and rounding.

You correctly calculated the total gene span and its proportion of the haploid genome.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Ploidy level mismatch in chromosome calculation

You used the diploid chromosome count 2n=142n = 14 instead of halving it to the haploid count n=7n = 7 when averaging the haploid genome size.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the diploid chromosome number (2n2n) with the haploid chromosome number (nn) when distributing the DNA of a haploid genome assembly.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match genome assembly ploidy to chromosome count
  • A haploid genome assembly contains the DNA of exactly one set of chromosomes (nn).

  • Whenever a problem specifies a haploid genome size for a 2n2n organism, calculate n=2n2n = \frac{2n}{2} first before calculating per-chromosome averages.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the haploid chromosome number: n=2n2=142=7 chromosomesn = \frac{2n}{2} = \frac{14}{2} = 7\text{ chromosomes}.

  2. Divide the total haploid genome length by nn: Average length=490 Mb7 chromosomes=70.0 Mb\text{Average length} = \frac{490\text{ Mb}}{7\text{ chromosomes}} = 70.0\text{ Mb}.

Final answer

(a) 70.0 Mb70.0\text{ Mb}; (b) 57.1 genes/Mb57.1\text{ genes/Mb}; (c) 20.0%20.0\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between haploid (nn) and diploid (2n2n) genomic definitions before setting up division steps.

  • Practice checking whether given genome assemblies describe the 1C1C (haploid) or 2C2C (diploid) DNA content.

OverviewACEpath Teacher's Diagnosis

02 The student inverts the gene density ratio by dividing the genome length in Mb by the number of genes instead of genes by Mb, yielding 0.0175 Mb/gene.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    4.90×108 bp=490 Mb  ⟹  n=142=7  ⟹  Average length=490 Mb7=70 Mb4.90 \times 10^8\text{ bp} = 490\text{ Mb} \implies n = \frac{14}{2} = 7 \implies \text{Average length} = \frac{490\text{ Mb}}{7} = 70\text{ Mb}

  2. Step 2

    Gene density=490 Mb28000 genes=0.0175 genes/Mb\text{Gene density} = \frac{490\text{ Mb}}{28000\text{ genes}} = 0.0175\text{ genes/Mb}

    Correct

    Gene density=28,000 genes490 Mb≈57.1 genes/Mb\text{Gene density} = \frac{28{,}000\text{ genes}}{490\text{ Mb}} \approx 57.1\text{ genes/Mb}

    You set up the ratio as lengthgenes\frac{\text{length}}{\text{genes}} instead of geneslength\frac{\text{genes}}{\text{length}}. The requested unit is genes/Mb\text{genes/Mb}, which requires dividing the total number of genes by the genome size in megabases.

  3. Step 3

    Total gene DNA=28000×3500 bp=98000000 bp  ⟹  Percentage=(98000000490000000)×100%=20%\text{Total gene DNA} = 28000 \times 3500\text{ bp} = 98000000\text{ bp} \implies \text{Percentage} = \left(\frac{98000000}{490000000}\right) \times 100\% = 20\%

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted base pairs to megabase pairs using the factor 1 Mb=106 bp1\text{ Mb} = 10^6\text{ bp}.

You correctly recognized that a haploid genome corresponds to n=7n = 7 chromosomes rather than the diploid number 2n=142n = 14.

You determined the total base pairs occupied by annotated genes and accurately calculated their genomic percentage.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Rate Ratio

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You inverted the numerator and denominator in the density calculation, computing the average physical distance per gene (Mb/gene\text{Mb/gene}) rather than the gene density (genes/Mb\text{genes/Mb}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Match the fraction setup to the target unit
  • In any rate or density expression of the form Unit A/Unit B\text{Unit } A / \text{Unit } B, the quantity measured in Unit A\text{Unit } A must be the numerator and the quantity measured in Unit B\text{Unit } B must be the denominator.

  • Check your units before dividing: genes/Mb\text{genes/Mb} requires Number of genesGenome size in Mb\frac{\text{Number of genes}}{\text{Genome size in Mb}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Gene density=Total genesGenome size in Mb=28,000 genes490 Mb\text{Gene density} = \frac{\text{Total genes}}{\text{Genome size in Mb}} = \frac{28{,}000\text{ genes}}{490\text{ Mb}}

  2. Gene density≈57.14 genes/Mb\text{Gene density} \approx 57.14\text{ genes/Mb}

Final answer

(a) 70.0 Mb70.0\text{ Mb}; (b) 57.1 genes/Mb57.1\text{ genes/Mb}; (c) 20.0%20.0\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out the units alongside numbers in your fraction to ensure the resulting unit matches the prompt.

  • Perform a quick plausibility check: with thousands of genes distributed across hundreds of megabases, each megabase should contain tens of genes, not a tiny fraction of a gene.

OverviewACEpath Teacher's Diagnosis

03 The student omits multiplying by 100 when calculating percentage, reporting the fractional value 0.20% instead of 20%.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    4.90×108 bp=490 Mb  ⟹  n=7  ⟹  Average length=4907=70 Mb4.90 \times 10^8\text{ bp} = 490\text{ Mb} \implies n = 7 \implies \text{Average length} = \frac{490}{7} = 70\text{ Mb}

  2. Step 2

    Gene density=28000 genes490 Mb  ⟹  Gene density=57.1 genes/Mb\text{Gene density} = \frac{28000\text{ genes}}{490\text{ Mb}} \implies \text{Gene density} = 57.1\text{ genes/Mb}

  3. Step 3

    Total gene length=28000×3500 bp=9.80×107 bp\text{Total gene length} = 28000 \times 3500\text{ bp} = 9.80 \times 10^7\text{ bp}

  4. Step 4

    Percentage=9.80×1074.90×108  ⟹  Percentage=0.20%\text{Percentage} = \frac{9.80 \times 10^7}{4.90 \times 10^8} \implies \text{Percentage} = 0.20\%

    Correct

    Percentage=(9.80×107 bp4.90×108 bp)×100%=20.0%\text{Percentage} = \left(\frac{9.80 \times 10^7\text{ bp}}{4.90 \times 10^8\text{ bp}}\right) \times 100\% = 20.0\%

    You calculated the decimal fraction 9.80×1074.90×108=0.20\frac{9.80 \times 10^7}{4.90 \times 10^8} = 0.20, but you attached the percent symbol without multiplying by 100100. A fraction of 0.200.20 equals 20%20\%, whereas 0.20%0.20\% represents only 0.00200.0020.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted base pairs to megabase pairs using the factor 1 Mb=106 bp1\text{ Mb} = 10^6\text{ bp}.

You correctly used the haploid chromosome number n=7n = 7 to find the average chromosome size.

You calculated the mean gene density with appropriate units and rounding.

You accurately found the total base pairs occupied by all annotated genes.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Percentage Conversion Error

You appended a percent symbol to a decimal fraction without multiplying by 100.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing a decimal proportion (a value between 0 and 1) with a percentage (parts per hundred). Writing 0.20%0.20\% divides the true percentage by 100, understating the gene coverage by a factor of 100.

REASONING PATH
Your ACEpath teacher’s suggested approach
Fraction to Percentage Conversion
  • Percentage=Fraction×100%\text{Percentage} = \text{Fraction} \times 100\%

  • Always multiply your decimal or fraction quotient by 100100 before attaching the %\% sign.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Take the fractional coverage: 9.80×107 bp4.90×108 bp=0.200\frac{9.80 \times 10^7\text{ bp}}{4.90 \times 10^8\text{ bp}} = 0.200

  2. Multiply by 100%100\% to express the ratio as a percentage: 0.200×100%=20.0%0.200 \times 100\% = 20.0\%

Final answer

(a) 70.0 Mb70.0\text{ Mb}; (b) 57.1 genes/Mb57.1\text{ genes/Mb}; (c) 20.0%20.0\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how to convert between decimals, fractions, and percentages by practicing quick conversions.

  • Double-check that whenever you write a percent sign, the numerical value is 100100 times larger than its decimal equivalent.

Lock it in

Similar question

01

A diploid fruit fly has 2n=82n = 8 chromosomes and a haploid nuclear genome length of 1.80×108 bp1.80 \times 10^8\text{ bp}. Calculate the average physical length of a chromosome in megabase pairs (Mb\text{Mb}) per haploid set.

Answer

22.5 Mb22.5\text{ Mb}. First convert genome size: 1.80×108 bp=180 Mb1.80 \times 10^8\text{ bp} = 180\text{ Mb}. The haploid chromosome count is n=8/2=4n = 8 / 2 = 4. Dividing gives 180 Mb/4=22.5 Mb180\text{ Mb} / 4 = 22.5\text{ Mb}.

02

A diploid legume (2n=222n = 22) has a haploid genome size of 1.10×109 bp1.10 \times 10^9\text{ bp} and contains 33,00033{,}000 protein-coding genes. Calculate: (a) the average chromosome length in Mb\text{Mb} per haploid set, and (b) the overall gene density in genes/Mb\text{genes/Mb}.

Answer

(a) 100 Mb100\text{ Mb}; (b) 30.0 genes/Mb30.0\text{ genes/Mb}. Haploid genome size is 1,100 Mb1{,}100\text{ Mb} and n=11n = 11. (a) Average chromosome length =1,100 Mb/11=100 Mb= 1{,}100\text{ Mb} / 11 = 100\text{ Mb}. (b) Gene density =33,000 genes/1,100 Mb=30.0 genes/Mb= 33{,}000\text{ genes} / 1{,}100\text{ Mb} = 30.0\text{ genes/Mb}.

03

A diploid cereal crop (2n=102n = 10) has an average chromosome length of 80.0 Mb80.0\text{ Mb} per haploid set. If its genome contains 24,00024{,}000 genes with an average length of 4,000 bp4{,}000\text{ bp} each, what percentage of the haploid nuclear genome corresponds to gene loci?

Answer

12.0%12.0\%. Total haploid genome size =10/2×80.0 Mb=5×80.0 Mb=400 Mb=4.00×108 bp= 10 / 2 \times 80.0\text{ Mb} = 5 \times 80.0\text{ Mb} = 400\text{ Mb} = 4.00 \times 10^8\text{ bp}. Total gene span =24,000×4,000 bp=9.60×107 bp= 24{,}000 \times 4{,}000\text{ bp} = 9.60 \times 10^7\text{ bp}. Proportion =(9.60×107/4.00×108)×100%=12.0%= (9.60 \times 10^7 / 4.00 \times 10^8) \times 100\% = 12.0\%.

Loading workspace…