Resources

A tropical forest reserve experiences progressive fragmentation due to logging roads, dividing a contiguous 1.00 km×1.00 km1.00\text{ km} \times 1.00\text{ km} (100.0 ha100.0\text{ ha}) square forest tract into four equal, isolated square fragments separated by wide cleared corridors. Ecological field surveys demonstrate that the microclimatic 'edge effect' (elevated desiccating winds, invasive weeds, and elevated tree mortality) penetrates perpendicularly to a critical threshold depth of d=50.0 md = 50.0\text{ m} from every forest boundary. Determine the percentage of original interior core habitat (the area unaffected by edge effects) that is permanently lost when the single 100.0 ha100.0\text{ ha} tract is bisected into four equal square patches of 25.0 ha25.0\text{ ha} each.

Answer and steps

Final answer

21.0%21.0\%

Steps

01

Understanding Core Habitat and the Edge Effect

The edge effect refers to ecological and microclimatic changes (such as increased wind, sunlight, desiccating microclimates, and elevated tree mortality) that penetrate into a forest boundary up to a distance dd.

The interior core habitat is the protected inner area that lies at a distance strictly greater than dd from all external boundaries. For any square forest tract of side length LL, the edge effect encroaches by dd on all four sides, so the protected inner core is a smaller concentric square of side length: Lcore=L−2dL_{\text{core}} = L - 2d

Given the depth of edge penetration: d=50.0 md = 50.0\text{ m}


02

Calculate Original Core Area (Before Fragmentation)

The original tract is a single contiguous square with:

  • Total area A0=100.0 ha=1,000,000 m2A_0 = 100.0\text{ ha} = 1{,}000{,}000\text{ m}^2
  • Side length L0=1,000,000 m2=1000 m=1.00 kmL_0 = \sqrt{1{,}000{,}000\text{ m}^2} = 1000\text{ m} = 1.00\text{ km}

Subtracting the edge buffer from both ends along each dimension: Lcore, 0=1000 m−2(50.0 m)=900 mL_{\text{core, 0}} = 1000\text{ m} - 2(50.0\text{ m}) = 900\text{ m}

The original interior core habitat area is: Acore, 0=(900 m)×(900 m)=810,000 m2=81.0 haA_{\text{core, 0}} = (900\text{ m}) \times (900\text{ m}) = 810{,}000\text{ m}^2 = 81.0\text{ ha}


03

Calculate New Core Area (After Fragmentation)

The tract is divided into four equal, isolated square patches, each with:

  • Patch area Apatch=25.0 ha=250,000 m2A_{\text{patch}} = 25.0\text{ ha} = 250{,}000\text{ m}^2
  • Patch side length Lpatch=250,000 m2=500 mL_{\text{patch}} = \sqrt{250{,}000\text{ m}^2} = 500\text{ m}

Because each patch is completely isolated by wide corridors, the edge effect penetrates d=50.0 md = 50.0\text{ m} inward from all four boundaries of each patch: Lcore, patch=500 m−2(50.0 m)=400 mL_{\text{core, patch}} = 500\text{ m} - 2(50.0\text{ m}) = 400\text{ m}

The core habitat of a single patch is: Acore, patch=(400 m)×(400 m)=160,000 m2=16.0 haA_{\text{core, patch}} = (400\text{ m}) \times (400\text{ m}) = 160{,}000\text{ m}^2 = 16.0\text{ ha}

The total core habitat across all four patches is: Acore, total=4×16.0 ha=64.0 haA_{\text{core, total}} = 4 \times 16.0\text{ ha} = 64.0\text{ ha}


04

Determine the Percentage of Core Habitat Lost

The reduction in interior core habitat is: ΔAcore=Acore, 0−Acore, total=81.0 ha−64.0 ha=17.0 ha\Delta A_{\text{core}} = A_{\text{core, 0}} - A_{\text{core, total}} = 81.0\text{ ha} - 64.0\text{ ha} = 17.0\text{ ha}

The percentage of the original core habitat lost is: Percentage lost=ΔAcoreAcore, 0×100%=17.0 ha81.0 ha×100%≈20.988%≈21.0%\text{Percentage lost} = \frac{\Delta A_{\text{core}}}{A_{\text{core, 0}}} \times 100\% = \frac{17.0\text{ ha}}{81.0\text{ ha}} \times 100\% \approx 20.988\% \approx 21.0\%

Common Pitfall: A frequent mistake is dividing the lost core area (17.0 ha17.0\text{ ha}) by the total forest area (100.0 ha100.0\text{ ha}), which would incorrectly yield 17.0%17.0\%. Always verify the denominator specified by the question—here, it is the original interior core habitat (81.0 ha81.0\text{ ha}).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student subtracts the edge penetration depth only once per dimension rather than from both opposing boundaries when calculating the core side lengths.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Original tract side=1000 m  ⟹  Original core side=1000 m−50 m=950 m  ⟹  Original core area=(950 m)2=902,500 m2=90.25 ha\text{Original tract side} = 1000\text{ m} \implies \text{Original core side} = 1000\text{ m} - 50\text{ m} = 950\text{ m} \implies \text{Original core area} = (950\text{ m})^2 = 902{,}500\text{ m}^2 = 90.25\text{ ha}

    Correct

    Lcore, 0=1000 m−2(50.0 m)=900 m  ⟹  Acore, 0=(900 m)2=810,000 m2=81.0 haL_{\text{core, 0}} = 1000\text{ m} - 2(50.0\text{ m}) = 900\text{ m} \implies A_{\text{core, 0}} = (900\text{ m})^2 = 810{,}000\text{ m}^2 = 81.0\text{ ha}

    Because the edge effect penetrates inward from all boundaries, each dimension loses depth d=50 md = 50\text{ m} from both opposite edges, meaning you must subtract 2d=100 m2d = 100\text{ m} from the side length.

  2. Step 2

    Each fragment side=500 m  ⟹  Fragment core side=500 m−50 m=450 m  ⟹  Fragment core area=(450 m)2=202,500 m2=20.25 ha  ⟹  Total fragmented core area=4×20.25 ha=81.0 ha\text{Each fragment side} = 500\text{ m} \implies \text{Fragment core side} = 500\text{ m} - 50\text{ m} = 450\text{ m} \implies \text{Fragment core area} = (450\text{ m})^2 = 202{,}500\text{ m}^2 = 20.25\text{ ha} \implies \text{Total fragmented core area} = 4 \times 20.25\text{ ha} = 81.0\text{ ha}

    Correct

    Lcore, patch=500 m−2(50.0 m)=400 m  ⟹  Acore, patch=(400 m)2=16.0 ha  ⟹  Acore, total=4×16.0 ha=64.0 haL_{\text{core, patch}} = 500\text{ m} - 2(50.0\text{ m}) = 400\text{ m} \implies A_{\text{core, patch}} = (400\text{ m})^2 = 16.0\text{ ha} \implies A_{\text{core, total}} = 4 \times 16.0\text{ ha} = 64.0\text{ ha}

    You repeated the same error for each isolated fragment: subtracting 50 m50\text{ m} once instead of subtracting 2×50 m=100 m2 \times 50\text{ m} = 100\text{ m} across opposing patch edges.

  3. Step 3

    Core habitat lost=90.25 ha−81.0 ha=9.25 ha  ⟹  Percentage of original core habitat lost=(9.25 ha90.25 ha)×100%=10.2%\text{Core habitat lost} = 90.25\text{ ha} - 81.0\text{ ha} = 9.25\text{ ha} \implies \text{Percentage of original core habitat lost} = \left(\frac{9.25\text{ ha}}{90.25\text{ ha}}\right) \times 100\% = 10.2\%

    Correct

    ΔAcore=81.0 ha−64.0 ha=17.0 ha  ⟹  Percentage lost=(17.0 ha81.0 ha)×100%≈21.0%\Delta A_{\text{core}} = 81.0\text{ ha} - 64.0\text{ ha} = 17.0\text{ ha} \implies \text{Percentage lost} = \left(\frac{17.0\text{ ha}}{81.0\text{ ha}}\right) \times 100\% \approx 21.0\%

    Your reasoning for calculating the lost core habitat and finding the percentage relative to the original core area was mathematically sound, but your numerical answer was affected by the core dimensions computed in Steps 1 and 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the patch side lengths from the given hectare areas.

You correctly set up the percentage loss equation by dividing lost core habitat by original core habitat rather than total area.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
One-sided buffer deduction

You subtracted the edge penetration buffer dd only once along each dimension instead of accounting for both opposing edges.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing linear distance from an edge with total width reduction across a bounded two-dimensional shape. A square has two opposing boundaries along each axis (left/right and top/bottom), so the core side length is always L−2dL - 2d.

REASONING PATH
Your ACEpath teacher’s suggested approach
Core Dimension Formula
  • For a square patch of side length LL surrounded on all sides by edge depth dd, the interior core side length is Lcore=L−2dL_{\text{core}} = L - 2d.

  • Always sketch the patch and verify that edge buffers are deducted from both ends of the dimension.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Deduct 2d=2(50.0 m)=100 m2d = 2(50.0\text{ m}) = 100\text{ m} from the original tract side: Lcore, 0=1000 m−100 m=900 mL_{\text{core, 0}} = 1000\text{ m} - 100\text{ m} = 900\text{ m}, giving Acore, 0=(900 m)2=810,000 m2=81.0 haA_{\text{core, 0}} = (900\text{ m})^2 = 810{,}000\text{ m}^2 = 81.0\text{ ha}.

  2. Deduct 2d=100 m2d = 100\text{ m} from each patch side: Lcore, patch=500 m−100 m=400 mL_{\text{core, patch}} = 500\text{ m} - 100\text{ m} = 400\text{ m}, giving single patch core Acore, patch=(400 m)2=16.0 haA_{\text{core, patch}} = (400\text{ m})^2 = 16.0\text{ ha} and total core 4×16.0 ha=64.0 ha4 \times 16.0\text{ ha} = 64.0\text{ ha}.

  3. Calculate the lost core habitat: ΔAcore=81.0 ha−64.0 ha=17.0 ha\Delta A_{\text{core}} = 81.0\text{ ha} - 64.0\text{ ha} = 17.0\text{ ha}.

  4. Find the percentage of original core habitat lost: 17.0 ha81.0 ha×100%≈20.988%≈21.0%\frac{17.0\text{ ha}}{81.0\text{ ha}} \times 100\% \approx 20.988\% \approx 21.0\%.

Final answer

21.0%21.0\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw a quick cross-section or top-down diagram to mark edge zones on both opposing sides before writing down core dimensions.

  • Practice calculating interior core areas for rectangular and circular habitat reserves with uniform edge buffers.

OverviewACEpath Teacher's Diagnosis

02 The student calculates the loss relative to the total tract area (100.0 ha) instead of expressing it as a percentage of the original interior core habitat (81.0 ha).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Original core side=1000 m−2(50 m)=900 m  ⟹  Original core area=(900 m)2=810,000 m2=81.0 ha\text{Original core side} = 1000\text{ m} - 2(50\text{ m}) = 900\text{ m} \implies \text{Original core area} = (900\text{ m})^2 = 810{,}000\text{ m}^2 = 81.0\text{ ha}

  2. Step 2

    Fragment side=500 m  ⟹  Fragment core side=500 m−2(50 m)=400 m  ⟹  Total fragmented core area=4×(400 m)2=640,000 m2=64.0 ha\text{Fragment side} = 500\text{ m} \implies \text{Fragment core side} = 500\text{ m} - 2(50\text{ m}) = 400\text{ m} \implies \text{Total fragmented core area} = 4 \times (400\text{ m})^2 = 640{,}000\text{ m}^2 = 64.0\text{ ha}

  3. Step 3

    Core habitat lost=81.0 ha−64.0 ha=17.0 ha\text{Core habitat lost} = 81.0\text{ ha} - 64.0\text{ ha} = 17.0\text{ ha}

  4. Step 4

    Percentage of core habitat lost=(17.0 ha100.0 ha)×100%=17.0%\text{Percentage of core habitat lost} = \left(\frac{17.0\text{ ha}}{100.0\text{ ha}}\right) \times 100\% = 17.0\%

    Correct

    Percentage of core habitat lost=(17.0 ha81.0 ha)×100%≈21.0%\text{Percentage of core habitat lost} = \left(\frac{17.0\text{ ha}}{81.0\text{ ha}}\right) \times 100\% \approx 21.0\%

    The problem asks for the percentage of original interior core habitat that is lost. You divided by the total tract area (100.0 ha100.0\text{ ha}) instead of the original core area (81.0 ha81.0\text{ ha}).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly accounted for the two-sided edge penetration buffer of 2d=100 m2d = 100\text{ m} along each dimension.

You accurately converted between square meters and hectares.

You correctly found the net reduction in core habitat of 17.0 ha17.0\text{ ha}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect Base (Denominator) in Percentage Calculation

You used the total reserve area (100.0 ha100.0\text{ ha}) as the denominator instead of the original core habitat area (81.0 ha81.0\text{ ha}).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the total geographical tract area with the baseline reference habitat quantity specified by the question (the original interior core area).

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify the Reference Value (Base)
  • When calculating a percentage change or loss of quantity XX, the denominator must be the initial amount of quantity XX, not the total overall system size.

  • Underline the exact phrase in the prompt: 'percentage of original interior core habitat'. Match your denominator specifically to Acore, 0A_{\text{core, 0}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the baseline value specified by the question: original core habitat Acore, 0=81.0 haA_{\text{core, 0}} = 81.0\text{ ha}.

  2. Divide the lost core area by the original core area: 17.0 ha81.0 ha≈0.20988\frac{17.0\text{ ha}}{81.0\text{ ha}} \approx 0.20988.

  3. Multiply by 100%100\% to obtain 20.988%≈21.0%20.988\% \approx 21.0\%.

Final answer

21.0%21.0\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check percentage word problems by circling the phrase right after 'percentage of' to confirm your denominator.

  • Practice problems comparing loss relative to total reserve area versus loss relative to initial core area.

OverviewACEpath Teacher's Diagnosis

03 The student calculates the remaining core habitat percentage relative to the original core rather than the percentage lost.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Original core side=1000 m−2(50 m)=900 m  ⟹  Original core area=(900 m)2=81.0 ha\text{Original core side} = 1000\text{ m} - 2(50\text{ m}) = 900\text{ m} \implies \text{Original core area} = (900\text{ m})^2 = 81.0\text{ ha}

  2. Step 2

    Fragment core side=500 m−2(50 m)=400 m  ⟹  Fragment core area=(400 m)2=16.0 ha  ⟹  Total fragmented core area=4×16.0 ha=64.0 ha\text{Fragment core side} = 500\text{ m} - 2(50\text{ m}) = 400\text{ m} \implies \text{Fragment core area} = (400\text{ m})^2 = 16.0\text{ ha} \implies \text{Total fragmented core area} = 4 \times 16.0\text{ ha} = 64.0\text{ ha}

  3. Step 3

    Percentage=(64.0 ha81.0 ha)×100%=79.0%\text{Percentage} = \left(\frac{64.0\text{ ha}}{81.0\text{ ha}}\right) \times 100\% = 79.0\%

    Correct

    Percentage lost=81.0 ha−64.0 ha81.0 ha×100%=17.0 ha81.0 ha×100%≈21.0%\text{Percentage lost} = \frac{81.0\text{ ha} - 64.0\text{ ha}}{81.0\text{ ha}} \times 100\% = \frac{17.0\text{ ha}}{81.0\text{ ha}} \times 100\% \approx 21.0\%

    You evaluated the percentage of core habitat retained rather than the percentage lost.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly subtracted double the edge penetration depth from each side length to find the interior core dimensions.

You accurately converted square meters to hectares and calculated the total core area across all four patches.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Complement / Target Quantity Confusion

You evaluated AfinalAinitial\frac{A_{\text{final}}}{A_{\text{initial}}} instead of Ainitial−AfinalAinitial\frac{A_{\text{initial}} - A_{\text{final}}}{A_{\text{initial}}}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You calculated the fraction of core habitat remaining instead of the fraction permanently lost, stopping one step before taking the complement (100%−79.0%=21.0%100\% - 79.0\% = 21.0\%).

REASONING PATH
Your ACEpath teacher’s suggested approach
Target Quantity Audit
  • When a question asks for a 'percentage lost', 'percentage decrease', or 'relative reduction', the numerator must represent the change (ΔA=Ainitial−Afinal\Delta A = A_{\text{initial}} - A_{\text{final}}), not the final amount (AfinalA_{\text{final}}).

  • Write down Percentage Lost=LostOriginal×100%=100%−Percentage Retained\text{Percentage Lost} = \frac{\text{Lost}}{\text{Original}} \times 100\% = 100\% - \text{Percentage Retained} before computing the ratio.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. ΔAcore=81.0 ha−64.0 ha=17.0 ha\Delta A_{\text{core}} = 81.0\text{ ha} - 64.0\text{ ha} = 17.0\text{ ha}

  2. Percentage lost=(17.0 ha81.0 ha)×100%≈20.988%≈21.0%\text{Percentage lost} = \left(\frac{17.0\text{ ha}}{81.0\text{ ha}}\right) \times 100\% \approx 20.988\% \approx 21.0\%

Final answer

21.0%21.0\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Always circle or underline whether the prompt asks for 'percentage remaining' or 'percentage lost'.

  • If you compute the remaining percentage first, remember to subtract it from 100%100\% to find the amount lost.

Lock it in

Similar question

01

A square wildlife preserve of size 800 m×800 m800\text{ m} \times 800\text{ m} has an edge buffer zone of depth d=40.0 md = 40.0\text{ m} on all outer boundaries. Calculate the area of the interior core habitat in hectares (1 ha=10,000 m21\text{ ha} = 10{,}000\text{ m}^2).

Answer

51.84 ha51.84\text{ ha}. Step 1: Core side length is 800 m−2(40.0 m)=720 m800\text{ m} - 2(40.0\text{ m}) = 720\text{ m}. Step 2: Core area is (720 m)2=518,400 m2=51.84 ha(720\text{ m})^2 = 518{,}400\text{ m}^2 = 51.84\text{ ha}.

02

A contiguous rectangular forest reserve of 1200 m×800 m1200\text{ m} \times 800\text{ m} is bisected by a cleared highway running parallel to its shorter side, creating two identical 600 m×800 m600\text{ m} \times 800\text{ m} fragments. If the edge penetration depth is d=50.0 md = 50.0\text{ m}, determine the total core area lost across the entire reserve due to this division.

Answer

7.0 ha7.0\text{ ha}. Step 1: Original core is (1200−100) m×(800−100) m=1100 m×700 m=77.0 ha(1200 - 100)\text{ m} \times (800 - 100)\text{ m} = 1100\text{ m} \times 700\text{ m} = 77.0\text{ ha}. Step 2: Each fragment core is (600−100) m×(800−100) m=500 m×700 m=35.0 ha(600 - 100)\text{ m} \times (800 - 100)\text{ m} = 500\text{ m} \times 700\text{ m} = 35.0\text{ ha}, giving a total of 70.0 ha70.0\text{ ha}. Step 3: Area lost is 77.0 ha−70.0 ha=7.0 ha77.0\text{ ha} - 70.0\text{ ha} = 7.0\text{ ha}.

03

An ecologist compares two reserve designs having the same total forest area of 36.0 ha36.0\text{ ha}: Design A is a single square tract (600 m×600 m600\text{ m} \times 600\text{ m}), and Design B consists of nine equal square patches (200 m×200 m200\text{ m} \times 200\text{ m} each). If the edge penetration depth is d=25.0 md = 25.0\text{ m}, what percentage of Design A's core habitat is retained in Design B?

Answer

66.9%66.9\%. Step 1: Design A core side is 600−2(25)=550 m600 - 2(25) = 550\text{ m}, area Acore, A=(550)2=302,500 m2=30.25 haA_{\text{core, A}} = (550)^2 = 302{,}500\text{ m}^2 = 30.25\text{ ha}. Step 2: Each Design B patch has core side 200−2(25)=150 m200 - 2(25) = 150\text{ m}, area (150)2=22,500 m2=2.25 ha(150)^2 = 22{,}500\text{ m}^2 = 2.25\text{ ha}; nine patches yield Acore, B=9×2.25=20.25 haA_{\text{core, B}} = 9 \times 2.25 = 20.25\text{ ha}. Step 3: Retained percentage is 20.2530.25×100%≈66.9%\frac{20.25}{30.25} \times 100\% \approx 66.9\%.

Loading workspace…