Resources

A Warburg respirometer is used in a cell physiology laboratory to monitor oxygen uptake by an isolated rat liver homogenate oxidizing sodium pyruvate at 25∘C25^{\circ}\text{C}. The manometer reading records a net consumption of 2.24 mL2.24\text{ mL} of dry O2\text{O}_2 gas measured at standard temperature and pressure (0∘C0^{\circ}\text{C} and 1.00 atm1.00\text{ atm}, where 1 mole of ideal gas=22.4 L1\text{ mole of ideal gas} = 22.4\text{ L}). Simultaneously, enzymatic analysis of the reaction flask reveals that 8.70×10−4 moles8.70\times 10^{-4}\text{ moles} of inorganic phosphate (Pi\text{P}_i) were esterified into ATP during this incubation period. Calculate: (1) the total moles of O2\text{O}_2 consumed, (2) the gram-atoms of oxygen consumed (nO=2×nO2n_{\text{O}} = 2 \times n_{\text{O}_2}), and (3) the experimental P/O\text{P/O} ratio (moles of Pi\text{P}_i esterified per gram-atom of oxygen consumed).

Answer and steps

Final answer

(1) Moles of O2\text{O}_2 consumed = 1.00×10−4 moles of O21.00\times 10^{-4}\text{ moles of O}_2; (2) Gram-atoms of oxygen consumed = 2.00×10−4 g-atoms of O2.00\times 10^{-4}\text{ g-atoms of O}; (3) Experimental P/O\text{P/O} ratio = 8.70×10−4 mol Pi2.00×10−4 g-atoms O=4.35\frac{8.70\times 10^{-4}\text{ mol P}_i}{2.00\times 10^{-4}\text{ g-atoms O}} = 4.35.

Steps

01

Calculate the moles of OX2\ce{O2} consumed

The volume of dry oxygen gas consumed at standard temperature and pressure (STP\text{STP}) is given in milliliters:

VOX2=2.24 mL=2.24×10−3 LV_{\ce{O2}} = 2.24\text{ mL} = 2.24 \times 10^{-3}\text{ L}

At STP\text{STP} (0∘C0^{\circ}\text{C} and 1.00 atm1.00\text{ atm}), 1 mole1\text{ mole} of an ideal gas occupies 22.4 L22.4\text{ L}. Using the molar volume of an ideal gas:

nOX2=VOX2Vmolar=2.24×10−3 L22.4 L/mol=1.00×10−4 moles of OX2n_{\ce{O2}} = \frac{V_{\ce{O2}}}{V_{\text{molar}}} = \frac{2.24 \times 10^{-3}\text{ L}}{22.4\text{ L/mol}} = 1.00 \times 10^{-4}\text{ moles of }\ce{O2}


02

Determine the gram-atoms of oxygen consumed

In cellular respiration biochemistry, oxygen uptake is conventionally expressed in terms of gram-atoms of oxygen (g-atoms of O\text{g-atoms of O}), where 1 g-atom1\text{ g-atom} represents 1 mole of atomic oxygen (O)1\text{ mole of atomic oxygen (O)}.

Because each diatomic oxygen molecule (OX2\ce{O2}) consists of 22 oxygen atoms:

nO=2×nOX2=2×(1.00×10−4 mol)=2.00×10−4 g-atoms of On_{\ce{O}} = 2 \times n_{\ce{O2}} = 2 \times (1.00 \times 10^{-4}\text{ mol}) = 2.00 \times 10^{-4}\text{ g-atoms of O}

Common Pitfall: Do not divide by 22. One mole of OX2\ce{O2} yields two moles of atomic oxygen (O\ce{O}), meaning the number of gram-atoms of oxygen is double the moles of molecular OX2\ce{O2}.


03

Calculate the experimental P/O\text{P/O} ratio

The P/O\text{P/O} ratio reflects the efficiency of oxidative phosphorylation, defined as the moles of inorganic phosphate (PXi\ce{P_i}) esterified into ATP\ce{ATP} per gram-atom of oxygen consumed (which corresponds to the transfer of one pair of electrons, 2eX−2\ce{e-}, to 12OX2\frac{1}{2}\ce{O2}):

P/O ratio=Moles of PXi esterifiedGram-atoms of O consumed\text{P/O ratio} = \frac{\text{Moles of }\ce{P_i}\text{ esterified}}{\text{Gram-atoms of O consumed}}

Substitute the given and calculated values:

P/O ratio=8.70×10−4 mol PXi2.00×10−4 g-atoms O=4.35\text{P/O ratio} = \frac{8.70 \times 10^{-4}\text{ mol }\ce{P_i}}{2.00 \times 10^{-4}\text{ g-atoms O}} = 4.35

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates the P/O ratio using moles of molecular oxygen O₂ instead of gram-atoms of oxygen O in the denominator.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    V=2.24 mL=0.00224 L  ⟹  n(OX2)=0.00224 L22.4 L/mol=1.00×10−4 molV = 2.24\text{ mL} = 0.00224\text{ L} \implies n(\ce{O2}) = \frac{0.00224\text{ L}}{22.4\text{ L/mol}} = 1.00 \times 10^{-4}\text{ mol}

  2. Step 2

    n(O)=2×(1.00×10−4 mol)=2.00×10−4 gram-atomsn(\ce{O}) = 2 \times (1.00 \times 10^{-4}\text{ mol}) = 2.00 \times 10^{-4}\text{ gram-atoms}

  3. Step 3

    P/O ratio=8.70×10−4 mol1.00×10−4 mol=8.70\text{P/O ratio} = \frac{8.70 \times 10^{-4}\text{ mol}}{1.00 \times 10^{-4}\text{ mol}} = 8.70

    Correct

    P/O ratio=8.70×10−4 mol Pi2.00×10−4 g-atoms O=4.35\text{P/O ratio} = \frac{8.70 \times 10^{-4}\text{ mol P}_i}{2.00 \times 10^{-4}\text{ g-atoms O}} = 4.35

    You substituted the moles of molecular oxygen (1.00×10−4 mol1.00 \times 10^{-4}\text{ mol}) into the denominator rather than the gram-atoms of oxygen (2.00×10−4 g-atoms2.00 \times 10^{-4}\text{ g-atoms}) that you calculated in Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the gas volume to liters and determined the moles of OX2\ce{O2} consumed using standard molar volume.

You correctly recognized that each molecule of OX2\ce{O2} provides two atoms of oxygen and found the gram-atoms of oxygen.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Denominator entity mismatch in P/O ratio

You calculated the correct number of gram-atoms of oxygen (2.00×10−4 g-atoms2.00 \times 10^{-4}\text{ g-atoms}) in Step 2, but accidentally plugged the moles of OX2\ce{O2} (1.00×10−4 mol1.00 \times 10^{-4}\text{ mol}) into the denominator of the ratio.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating molecular oxygen (OX2\ce{O2}) with atomic oxygen (O\ce{O} / gram-atoms of oxygen) in bioenergetics definitions. By definition, the P/O\text{P/O} ratio measures phosphate esterified per single atom of oxygen reduced (equivalent to 2e−2\text{e}^- transferred), not per OX2\ce{O2} molecule.

REASONING PATH
Your ACEpath teacher’s suggested approach
Definition of P/O Ratio
  • P/O ratio=moles of Pi esterifiedgram-atoms of atomic oxygen (O) consumed\text{P/O ratio} = \frac{\text{moles of }\ce{P}_i\text{ esterified}}{\text{gram-atoms of atomic oxygen (O) consumed}}

  • Always verify that the denominator uses moles of atomic oxygen (nO=2×nOX2n_{\ce{O}} = 2 \times n_{\ce{O2}}), not molecular OX2\ce{O2}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. P/O ratio=Moles of PiGram-atoms of O=8.70×10−4 mol2.00×10−4 g-atoms=4.35\text{P/O ratio} = \frac{\text{Moles of }\ce{P}_i}{\text{Gram-atoms of O}} = \frac{8.70 \times 10^{-4}\text{ mol}}{2.00 \times 10^{-4}\text{ g-atoms}} = 4.35

Final answer

(1) 1.00×10−4 moles of OX21.00 \times 10^{-4}\text{ moles of }\ce{O2}; (2) 2.00×10−4 g-atoms of O2.00 \times 10^{-4}\text{ g-atoms of O}; (3) P/O ratio=4.35\text{P/O ratio} = 4.35

NEXT STEPS
Final Takeaways from Your Teacher
  • When calculating the P/O\text{P/O} ratio, explicitly label your denominator as g-atoms of O\text{g-atoms of O} (or mol O\text{mol O}) rather than just mol\text{mol} to prevent accidentally grabbing nOX2n_{\ce{O2}}.

  • Remember that reduction of 1 g-atom of O1\text{ g-atom of O} corresponds to 2eX−2\ce{e-}, so dividing by moles of OX2\ce{O2} instead of O\ce{O} will double your calculated ratio.

OverviewACEpath Teacher's Diagnosis

02 The student misapplies the metric conversion factor between milliliters and liters, using 100 mL per liter instead of 1000 mL per liter.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    V=2.24 mL=0.0224 LV = 2.24\text{ mL} = 0.0224\text{ L}

    Correct

    V=2.24 mL=2.24×10−3 L=0.00224 LV = 2.24\text{ mL} = 2.24 \times 10^{-3}\text{ L} = 0.00224\text{ L}

    You divided 2.24 mL2.24\text{ mL} by 100100 instead of 10001000. Because 1 L=1000 mL1\text{ L} = 1000\text{ mL}, 2.24 mL2.24\text{ mL} equals 2.24×10−3 L2.24 \times 10^{-3}\text{ L} (0.00224 L0.00224\text{ L}).

  2. Step 2

    n(O2)=0.0224 L/22.4 L/mol=1.00×10−3 moln(\text{O}_2) = 0.0224\text{ L} / 22.4\text{ L/mol} = 1.00 \times 10^{-3}\text{ mol}

    Correct

    n(O2)=2.24×10−3 L22.4 L/mol=1.00×10−4 moln(\text{O}_2) = \frac{2.24 \times 10^{-3}\text{ L}}{22.4\text{ L/mol}} = 1.00 \times 10^{-4}\text{ mol}

    You applied the molar volume formula correctly (n=V/Vmn = V / V_m), but the result is ten times too large due to the volume conversion error from Step 1.

  3. Step 3

    n(O)=2×(1.00×10−3 mol)=2.00×10−3 gram-atomsn(\text{O}) = 2 \times (1.00 \times 10^{-3}\text{ mol}) = 2.00 \times 10^{-3}\text{ gram-atoms}

    Correct

    n(O)=2×(1.00×10−4 mol)=2.00×10−4 g-atoms of On(\text{O}) = 2 \times (1.00 \times 10^{-4}\text{ mol}) = 2.00 \times 10^{-4}\text{ g-atoms of O}

    You correctly multiplied the moles of diatomic O2\text{O}_2 by 22 to find the gram-atoms of atomic oxygen, but the value reflects the earlier decimal error.

  4. Step 4

    P/O ratio=8.70×10−4 mol2.00×10−3 mol=0.435\text{P/O ratio} = \frac{8.70 \times 10^{-4}\text{ mol}}{2.00 \times 10^{-3}\text{ mol}} = 0.435

    Correct

    P/O ratio=8.70×10−4 mol Pi2.00×10−4 g-atoms O=4.35\text{P/O ratio} = \frac{8.70 \times 10^{-4}\text{ mol P}_i}{2.00 \times 10^{-4}\text{ g-atoms O}} = 4.35

    You set up the ratio of esterified Pi\text{P}_i to atomic oxygen consumed correctly, but the resulting value is off by a factor of ten due to the carried-over error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the molar volume of an ideal gas at STP (22.4 L/mol22.4\text{ L/mol}) to relate gas volume to moles.

You correctly multiplied moles of O2\text{O}_2 by 22 to determine the gram-atoms of atomic oxygen.

You correctly defined and calculated the experimental P/O ratio as moles of inorganic phosphate esterified divided by gram-atoms of oxygen consumed.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Metric prefix conversion error

You converted milliliters to liters by shifting the decimal point two places left instead of three places left.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the metric prefix 'milli-' (10−310^{-3}, factor of 10001000) with 'centi-' (10−210^{-2}, factor of 100100), leading to a tenfold overestimation of the volume of gas.

REASONING PATH
Your ACEpath teacher’s suggested approach
Metric prefix standard
  • The prefix milli- (m) represents 10−310^{-3} (1 L=1000 mL1\text{ L} = 1000\text{ mL}), whereas centi- (c) represents 10−210^{-2} (1 m=100 cm1\text{ m} = 100\text{ cm}).

  • Always convert milliliters to liters using scientific notation: V (mL)×10−3 L/mLV\text{ (mL)} \times 10^{-3}\text{ L/mL}.

Biological sanity check for P/O ratio
  • Standard mitochondrial respiration typically yields a P/O ratio between 1.51.5 and 3.03.0 for physiological substrates (or slightly higher with substrate-level phosphorylation).

  • If your calculated P/O ratio falls under 1.01.0 for an active respiratory substrate, immediately double-check your initial oxygen volume unit conversions.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the volume using 1 mL=10−3 L1\text{ mL} = 10^{-3}\text{ L}: V=2.24 mL=2.24×10−3 LV = 2.24\text{ mL} = 2.24 \times 10^{-3}\text{ L}.

  2. Calculate moles of O2\text{O}_2: n(O2)=2.24×10−3 L22.4 L/mol=1.00×10−4 moln(\text{O}_2) = \frac{2.24 \times 10^{-3}\text{ L}}{22.4\text{ L/mol}} = 1.00 \times 10^{-4}\text{ mol}.

  3. Calculate gram-atoms of atomic oxygen: n(O)=2×1.00×10−4 mol=2.00×10−4 g-atoms of On(\text{O}) = 2 \times 1.00 \times 10^{-4}\text{ mol} = 2.00 \times 10^{-4}\text{ g-atoms of O}.

  4. Compute the P/O ratio: P/O=8.70×10−4 mol Pi2.00×10−4 g-atoms O=4.35\text{P/O} = \frac{8.70 \times 10^{-4}\text{ mol P}_i}{2.00 \times 10^{-4}\text{ g-atoms O}} = 4.35.

Final answer

(1) 1.00×10−4 mol of O21.00 \times 10^{-4}\text{ mol of O}_2; (2) 2.00×10−4 g-atoms of O2.00 \times 10^{-4}\text{ g-atoms of O}; (3) P/O ratio=4.35\text{P/O ratio} = 4.35

NEXT STEPS
Final Takeaways from Your Teacher
  • Review metric prefix conversions between mL\text{mL}, μL\mu\text{L}, and L\text{L} to ensure accurate decimal placement.

  • Practice converting gas volumes directly into scientific notation before dividing by molar gas volume.

  • Perform physiological sanity checks on energetic ratios like P/O and respiratory quotient (RQ) at the end of every multi-step problem.

OverviewACEpath Teacher's Diagnosis

03 The student divides moles of O₂ by 2 instead of multiplying by 2 when determining gram-atoms of oxygen.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    V=2.24 mL=0.00224 L  ⟹  n(OX2)=0.00224 L22.4 L/mol=1.00×10−4 molV = 2.24\text{ mL} = 0.00224\text{ L} \implies n(\ce{O2}) = \frac{0.00224\text{ L}}{22.4\text{ L/mol}} = 1.00 \times 10^{-4}\text{ mol}

  2. Step 2

    n(O)=1.00×10−4 mol2=5.00×10−5 gram-atomsn(\ce{O}) = \frac{1.00 \times 10^{-4}\text{ mol}}{2} = 5.00 \times 10^{-5}\text{ gram-atoms}

    Correct

    nO=2×nOX2=2×(1.00×10−4 mol)=2.00×10−4 g-atoms of On_{\ce{O}} = 2 \times n_{\ce{O2}} = 2 \times (1.00 \times 10^{-4}\text{ mol}) = 2.00 \times 10^{-4}\text{ g-atoms of O}

    Because each diatomic molecule of oxygen (OX2\ce{O2}) contains two oxygen atoms, 1 mole of OX21\text{ mole of }\ce{O2} yields 2 gram-atoms (moles) of atomic oxygen (O)2\text{ gram-atoms (moles) of atomic oxygen (O)}. You should multiply by 22 rather than divide by 22.

  3. Step 3

    P/O ratio=8.70×10−4 mol5.00×10−5 mol=17.4\text{P/O ratio} = \frac{8.70 \times 10^{-4}\text{ mol}}{5.00 \times 10^{-5}\text{ mol}} = 17.4

    Correct

    P/O ratio=8.70×10−4 mol PXi2.00×10−4 g-atoms O=4.35\text{P/O ratio} = \frac{8.70 \times 10^{-4}\text{ mol }\ce{P_i}}{2.00 \times 10^{-4}\text{ g-atoms O}} = 4.35

    Your formula setup and division were carried out correctly using your calculated value from Step 2, but the numerical answer is incorrect due to the propagated error in gram-atoms of oxygen.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the gas volume from milliliters to liters.

You applied the STP molar volume of 22.4 L/mol22.4\text{ L/mol} accurately to determine the moles of OX2\ce{O2}.

You correctly set up the definition of the P/O\text{P/O} ratio as moles of phosphate esterified divided by gram-atoms of oxygen.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Stoichiometric Multiplier

You divided by 22 instead of multiplying by 22 when converting moles of OX2\ce{O2} to gram-atoms of oxygen.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

A gram-atom is equivalent to one mole of single atoms. Since molecular oxygen is diatomic (OX2\ce{O2}), breaking apart 1 mole1\text{ mole} of OX2\ce{O2} produces 2 moles of O atoms2\text{ moles of O atoms}. Confusing the direction of unit conversion leads to dividing by the subscript rather than multiplying by the atom count per molecule.

REASONING PATH
Your ACEpath teacher’s suggested approach
Counting Atoms in Diatomic Molecules
  • 1 mol of XXn=n gram-atoms (or moles) of X1\text{ mol of }\ce{X_n} = n\text{ gram-atoms (or moles) of }\ce{X}.

  • Always verify that the count of individual atoms is larger than the count of multi-atom molecules: nO=2×nOX2n_{\ce{O}} = 2 \times n_{\ce{O2}}.

Biological Sense-Check on P/O Ratios
  • Standard physiological P/O\text{P/O} ratios for mitochondrial substrate oxidation typically range between 11 and 33 (or slightly higher for multi-step substrates such as pyruvate).

  • An experimental P/O\text{P/O} ratio exceeding 1010 strongly signals an underestimated oxygen denominator.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the correct gram-atoms of oxygen: nO=2×(1.00×10−4 mol)=2.00×10−4 g-atoms of On_{\ce{O}} = 2 \times (1.00 \times 10^{-4}\text{ mol}) = 2.00 \times 10^{-4}\text{ g-atoms of O}.

  2. Compute the experimental P/O\text{P/O} ratio using the corrected denominator: P/O ratio=8.70×10−4 mol PXi2.00×10−4 g-atoms O=4.35\text{P/O ratio} = \frac{8.70 \times 10^{-4}\text{ mol }\ce{P_i}}{2.00 \times 10^{-4}\text{ g-atoms O}} = 4.35.

Final answer

(1) 1.00×10−4 mol of OX21.00 \times 10^{-4}\text{ mol of }\ce{O2}; (2) 2.00×10−4 g-atoms of O2.00 \times 10^{-4}\text{ g-atoms of O}; (3) P/O ratio=4.35\text{P/O ratio} = 4.35

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the definition of 'gram-atom' as simply a historical synonym for a mole of atoms.

  • Practice unit conversions involving diatomic gases (OX2\ce{O2}, HX2\ce{H2}, NX2\ce{N2}) to build automaticity with stoichiometric multipliers.

  • Perform quick biological plausibility checks on respiratory parameters like P/O\text{P/O} ratios before finalizing your answers.

Lock it in

Similar question

01

An isolated mitochondrial suspension consumes 3.36 mL3.36\text{ mL} of dry OX2\ce{O2} gas at STP (22.4 L/mol22.4\text{ L/mol}) while esterifying 7.20×10−4 moles7.20 \times 10^{-4}\text{ moles} of inorganic phosphate into ATP\ce{ATP}. Calculate: (1) the gram-atoms of oxygen consumed and (2) the experimental P/O\text{P/O} ratio.

Answer

(1) nOX2=3.36×10−3 L22.4 L/mol=1.50×10−4 moln_{\ce{O2}} = \frac{3.36 \times 10^{-3}\text{ L}}{22.4\text{ L/mol}} = 1.50 \times 10^{-4}\text{ mol}. Thus, nO=2×1.50×10−4=3.00×10−4 g-atoms of On_{\ce{O}} = 2 \times 1.50 \times 10^{-4} = 3.00 \times 10^{-4}\text{ g-atoms of O}. (2) P/O ratio=7.20×10−4 mol Pi3.00×10−4 g-atoms O=2.40\text{P/O ratio} = \frac{7.20 \times 10^{-4}\text{ mol P}_i}{3.00 \times 10^{-4}\text{ g-atoms O}} = 2.40.

02

Mitochondria oxidizing succinate synthesize 1.80 mmol1.80\text{ mmol} of ATP\ce{ATP} while consuming 0.60 mmol0.60\text{ mmol} of molecular oxygen (OX2\ce{O2}). Determine the experimental P/O\text{P/O} ratio and state whether this value is consistent with the standard theoretical P/O\text{P/O} ratio for succinate oxidation (approx. 1.51.5).

Answer

nO=2×0.60 mmol=1.20 mg-atoms of On_{\ce{O}} = 2 \times 0.60\text{ mmol} = 1.20\text{ mg-atoms of O}. P/O ratio=1.80 mmol Pi1.20 mg-atoms O=1.50\text{P/O ratio} = \frac{1.80\text{ mmol P}_i}{1.20\text{ mg-atoms O}} = 1.50. This value matches the modern theoretical consensus of approximately 1.5 ATP1.5\text{ ATP} per pair of electrons from succinate entering via Complex II.

03

A Warburg respirometer experiment measures the oxidation of an unknown substrate. The reaction consumes 4.48 mL4.48\text{ mL} of OX2\ce{O2} at STP and esterifies 1.20×10−3 moles1.20 \times 10^{-3}\text{ moles} of Pi\ce{P}_i. A student mistakenly calculates the ratio as 1.20×10−32.00×10−4=6.00\frac{1.20 \times 10^{-3}}{2.00 \times 10^{-4}} = 6.00. Identify the student's conceptual error and determine the true P/O\text{P/O} ratio.

Answer

The student used moles of OX2\ce{O2} (nOX2=4.48×10−3 L22.4 L/mol=2.00×10−4 moln_{\ce{O2}} = \frac{4.48 \times 10^{-3}\text{ L}}{22.4\text{ L/mol}} = 2.00 \times 10^{-4}\text{ mol}) instead of gram-atoms of oxygen in the denominator. The correct oxygen quantity is nO=2×2.00×10−4=4.00×10−4 g-atoms of On_{\ce{O}} = 2 \times 2.00 \times 10^{-4} = 4.00 \times 10^{-4}\text{ g-atoms of O}. True P/O ratio=1.20×10−3 mol Pi4.00×10−4 g-atoms O=3.00\text{P/O ratio} = \frac{1.20 \times 10^{-3}\text{ mol P}_i}{4.00 \times 10^{-4}\text{ g-atoms O}} = 3.00.

Loading workspace…