Resources

A wildlife manager analyzes two mortality factors acting on an island deer population of N=500N = 500 individuals: (Factor A) a severe winter freeze that kills exactly 100100 deer; (Factor B) chronic wasting disease transmission, which kills 100100 deer. The manager argues: 'Because both Factor A and Factor B kill an identical absolute number of individuals (100100 deer each), both factors must exert the exact same density-dependent regulatory impact on the herd.' Evaluate this claim: (a) State whether the manager's definition of density dependence is correct or incorrect, referencing the mathematical definition of per capita mortality rate 1NdNdt\frac{1}{N}\frac{dN}{dt}. (b) If the population had instead been N=1,000N = 1{,}000 and Factor A still killed 20%20\% while Factor B killed 35%35\%, calculate the deaths caused by each factor and explain why absolute numbers of mortalities cannot be used to classify a factor as density-dependent.

Answer and steps

Final answer

(a) The manager's claim is incorrect. Density dependence is defined by whether the per capita mortality rate (proportion of the population killed, MN\frac{M}{N}), not the absolute number of deaths, changes as population density changes. (b) At N=1,000N = 1{,}000, Factor A kills 0.20×1,000=200 deer0.20 \times 1{,}000 = 200\text{ deer} (per capita rate remains constant at 20%20\%, confirming it is density-independent). Factor B kills 0.35×1,000=350 deer0.35 \times 1{,}000 = 350\text{ deer} (per capita rate rose from 100500=20%\frac{100}{500} = 20\% to 35%35\%, confirming positive density dependence). Relying on raw mortality counts creates a sign/convention trap because absolute deaths scale with population size even under strictly density-independent rates.

Steps

Part (a): Evaluating the Manager's Definition

The manager's claim is incorrect.

In population ecology, whether an environmental factor is density-dependent or density-independent is defined by how the per capita mortality rate changes with population density NN, not by the raw or absolute number of deaths.

Mathematically, the per capita mortality rate is given by: Per capita mortality rate=1N∣dNlossdt∣≈DeathsN\text{Per capita mortality rate} = \frac{1}{N}\left|\frac{dN_{\text{loss}}}{dt}\right| \approx \frac{\text{Deaths}}{N}

  • Density-independent factors: The proportion or probability of an individual dying (DeathsN\frac{\text{Deaths}}{N}) remains constant regardless of population density. Abiotic events such as severe winter freezes typically kill a certain percentage of the herd irrespective of how crowded the herd is.
  • Density-dependent factors: The per capita mortality rate changes as population density varies (for example, infectious disease transmission rates often increase as individuals live closer together).

Because both factors killed 100500=20%\frac{100}{500} = 20\% of the herd at N=500N = 500, their identical raw count of 100100 deaths is merely a coincidental snapshot at that single population size. A single data point of raw deaths cannot establish density dependence.


Part (b): Calculating Mortalities at N=1,000N = 1{,}000 and Identifying the Conceptual Pitfall

1. Calculate deaths at N=1,000N = 1{,}000:

  • Factor A (Severe Freeze): DeathsA=20%×1,000=0.20×1,000=200 deer\text{Deaths}_A = 20\% \times 1{,}000 = 0.20 \times 1{,}000 = 200\text{ deer}
  • Factor B (Chronic Wasting Disease): DeathsB=35%×1,000=0.35×1,000=350 deer\text{Deaths}_B = 35\% \times 1{,}000 = 0.35 \times 1{,}000 = 350\text{ deer}

2. Why absolute mortality numbers cannot classify density dependence:

  • At N=500N = 500, Factor A killed 100100 deer (100500=20%\frac{100}{500} = 20\%). At N=1,000N = 1{,}000, Factor A killed 200200 deer (2001,000=20%\frac{200}{1{,}000} = 20\%). Even though the absolute number of deaths doubled from 100100 to 200200, the per capita mortality rate remained constant at 20%20\%, confirming that Factor A is density-independent.
  • For Factor B, the per capita rate increased from 20%20\% (100500\frac{100}{500}) at N=500N = 500 to 35%35\% (3501,000\frac{350}{1{,}000}) at N=1,000N = 1{,}000, confirming that Factor B is density-dependent.

Key Pitfall to Avoid: Assuming that an increasing absolute death toll implies density dependence is a common error. Because absolute deaths naturally scale with population size (D=rate×ND = \text{rate} \times N), even a strictly density-independent factor will produce more absolute deaths in a larger population. Classification must always be based on the proportion or per capita rate.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student believes density dependence is defined by an increasing absolute number of deaths rather than an increasing per capita rate, incorrectly classifying Factor A as density-dependent because deaths increased from 100 to 200.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    The manager is incorrect because density dependence requires the mortality rate to increase with density. ⟹ Per capita rate is (1/N)(dN/dt)(1/N)(dN/dt), which must change with NN rather than remaining at a fixed number of deaths.

  2. Step 2

    Factor A deaths =0.20×1000=200= 0.20 \times 1000 = 200 ⟹ Factor B deaths =0.35×1000=350= 0.35 \times 1000 = 350

  3. Step 3

    Absolute numbers cannot classify density dependence because both factors increased in total deaths from 100100 to 200200 and 350350, so both factors are density-dependent.

    Correct

    Absolute numbers cannot classify density dependence because total deaths naturally scale with population size (D=rate×ND = \text{rate} \times N). Factor A's per capita rate remained constant at 20%20\% (100500=2001,000=0.20\frac{100}{500} = \frac{200}{1{,}000} = 0.20), making it density-independent, whereas Factor B's per capita rate rose from 20%20\% to 35%35\%, making it density-dependent.

    You stated that both factors are density-dependent because total deaths increased. An increase in absolute deaths occurs even under a constant per capita rate simply because the population is larger. Factor A is density-independent because its per capita rate stayed at 20%20\%.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly refuted the manager's claim in part (a) using the per capita rate formulation.

You accurately computed the total mortality counts for both factors at the higher population size.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equating Absolute Death Increase with Density Dependence

You noticed that the absolute death toll doubled for Factor A and concluded it was density-dependent.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated total mortality counts (D=m×ND = m \times N) with the per capita mortality rate (mm). In any population, doubling NN doubles total deaths even when the per capita mortality rate mm remains completely unchanged.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check per capita rate vs. absolute count
  • Density dependence depends on m=DeathsNm = \frac{\text{Deaths}}{N}, never on raw deaths Deaths\text{Deaths}.

  • Always compute DeathsN\frac{\text{Deaths}}{N} at both population sizes to see if the proportion changes.

Distinguish constant proportion from changing proportion
  • If DeathsN\frac{\text{Deaths}}{N} is constant across different densities, the factor is density-independent.

  • Observe that Factor A killed 100500=20%\frac{100}{500} = 20\% and 2001,000=20%\frac{200}{1{,}000} = 20\%, confirming it is density-independent.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compare the per capita mortality rate for Factor A: at N=500N = 500, rate is 100500=20%\frac{100}{500} = 20\%; at N=1,000N = 1{,}000, rate is 2001,000=20%\frac{200}{1{,}000} = 20\%.

  2. Because the per capita rate for Factor A does not change with density, Factor A is density-independent despite total deaths increasing from 100100 to 200200.

  3. Compare the per capita mortality rate for Factor B: at N=500N = 500, rate is 100500=20%\frac{100}{500} = 20\%; at N=1,000N = 1{,}000, rate is 3501,000=35%\frac{350}{1{,}000} = 35\%. Because the rate increased, Factor B is density-dependent.

  4. Conclude that absolute counts scale directly with population size (D=rate×ND = \text{rate} \times N), meaning an increase in raw deaths alone does not indicate density dependence.

Final answer

Factor A causes 200 deaths200\text{ deaths} and is density-independent; Factor B causes 350 deaths350\text{ deaths} and is density-dependent. Absolute counts cannot classify density dependence because raw deaths increase with population size even when mortality rates are density-independent.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice calculating the fraction DeathsN\frac{\text{Deaths}}{N} across two distinct population densities before assigning an ecological classification.

  • Remember that abiotic disturbances (such as freezes or floods) typically kill a constant percentage of organisms, making their raw death counts scale with population size.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the definitions of density-dependent and density-independent factors, asserting that constant absolute mortality defines density dependence.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    The manager is correct because density-dependent factors kill a constant number of individuals. If (1/N)(dN/dt)(1/N)(dN/dt) changes, the absolute number killed varies, which means it would depend on density instead of remaining steady.

    Correct

    The manager's claim is incorrect. Density dependence is defined by whether the per capita mortality rate 1NdNdt\frac{1}{N}\frac{dN}{dt} (the proportion of the population killed) changes as population size NN changes, not by a constant absolute death toll.

    You judged the manager's claim to be correct based on a reversed definition. A factor is density-dependent when the probability or proportion of an individual dying, 1N∣dNdt∣\frac{1}{N}\left|\frac{dN}{dt}\right|, depends on population density NN.

  2. Step 2

    Factor A deaths\text{Factor A deaths} = 0.20 ×\times 1000 = 200   ⟹  \implies Factor B deaths\text{Factor B deaths} = 0.35 ×\times 1000 = 350

  3. Step 3

    Absolute mortalities cannot be used because when population increases, the deaths changed from 100 to 200 and 350, showing that both factors became density-independent.

    Correct

    Absolute mortalities scale directly with population size (D=rate×ND = \text{rate} \times N). For Factor A, the per capita rate remained constant at 100500=2001,000=20%\frac{100}{500} = \frac{200}{1{,}000} = 20\%, making it density-independent. For Factor B, the per capita rate increased from 20%20\% to 35%35\%, demonstrating positive density dependence.

    You concluded that both factors became density-independent because their absolute deaths changed. In reality, absolute deaths almost always increase with population size even under constant per capita mortality. Classification requires comparing the per capita rates: Factor A remained constant (20%20\%, density-independent), while Factor B increased (20%→35%20\% \to 35\%, density-dependent).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly set up and solved the arithmetic to determine the absolute mortalities at N=1,000N = 1{,}000.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Definition Confusion: Absolute vs. Per Capita Rate

You treated an absolute count of deaths as the diagnostic indicator of density dependence rather than the per capita mortality rate.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated absolute mortality count (MM) with the per capita mortality rate (MN\frac{M}{N}). Because total deaths naturally equal rate multiplied by population size, raw counts scale with density and cannot reveal regulatory impact.

REASONING PATH
Your ACEpath teacher’s suggested approach
Per Capita vs. Absolute Count
  • Density dependence is governed by the per capita rate 1NdNdt\frac{1}{N}\frac{dN}{dt} (or proportion DeathsN\frac{\text{Deaths}}{N}), never by raw death counts.

  • Always convert raw death totals into proportions of the total population (NN) before evaluating density dependence.

Scaling of Density-Independent Mortality
  • For a density-independent factor, the per capita death rate remains constant, meaning absolute deaths increase proportionally as NN grows.

  • Do not assume that an increase in absolute deaths implies density dependence.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the per capita mortality rate for Factor A at both population sizes: at N=500N = 500, rate is 100500=20%\frac{100}{500} = 20\%; at N=1,000N = 1{,}000, rate is 2001,000=20%\frac{200}{1{,}000} = 20\%. Because the per capita rate is invariant to density, Factor A is density-independent.

  2. Calculate the per capita mortality rate for Factor B at both population sizes: at N=500N = 500, rate is 100500=20%\frac{100}{500} = 20\%; at N=1,000N = 1{,}000, rate is 3501,000=35%\frac{350}{1{,}000} = 35\%. Because the per capita rate increases with population density, Factor B is density-dependent.

Final answer

(a) Incorrect; density dependence depends on whether the per capita rate 1NdNdt\frac{1}{N}\frac{dN}{dt} changes with NN. (b) Factor A causes 200200 deaths and Factor B causes 350350 deaths; absolute counts cannot classify density dependence because raw deaths scale with NN even when the mortality rate is completely constant.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the mathematical definition of per capita growth and mortality rates in logistic and exponential models.

  • Practice identifying density dependence from two-point population tables by computing DeathsN\frac{\text{Deaths}}{N} for each data point.

Lock it in

Similar question

01

An early blizzard hits two separate pheasant populations: Population 1 has N=400N = 400 and suffers 8080 deaths; Population 2 has N=1,200N = 1{,}200 and suffers 240240 deaths. Calculate the per capita mortality rate for each population and state whether the blizzard acts as a density-dependent or density-independent factor.

Answer

For Population 1: 80400=0.20\frac{80}{400} = 0.20 (20%20\%). For Population 2: 2401,200=0.20\frac{240}{1{,}200} = 0.20 (20%20\%). The blizzard is density-independent because the per capita mortality rate is identical (20%20\%) regardless of density.

02

A parasitoid wasp attacks a caterpillar population. At density N=200N = 200, the wasp kills 3030 caterpillars. At density N=800N = 800, the wasp kills 240240 caterpillars. (a) Determine the per capita mortality rate at both densities. (b) Classify the wasp's regulatory effect as density-dependent, inverse density-dependent, or density-independent.

Answer

(a) At N=200N = 200, rate =30200=15%= \frac{30}{200} = 15\%. At N=800N = 800, rate =240800=30%= \frac{240}{800} = 30\%. (b) It is density-dependent (positive density dependence) because the per capita mortality rate increases as population density increases.

03

A fish population of size NN is subject to two fishing policies. Policy 1 harvests a fixed quota of 500500 fish each year. Policy 2 harvests a fixed proportion of 20%20\% of the population each year. For each policy, express the per capita mortality rate as a function of NN, and identify whether the policy acts in a density-dependent, density-independent, or inversely density-dependent manner.

Answer

Policy 1: Per capita rate is 500N\frac{500}{N}. As NN increases, the per capita rate decreases; this is inversely density-dependent (depensatory). Policy 2: Per capita rate is 0.20NN=0.20\frac{0.20N}{N} = 0.20 (constant 20%20\%); this is density-independent.

Loading workspace…