Resources

In a large, randomly mating population of pocket mice (N=10,000N = 10{,}000) living in a desert environment, coat color is governed by a single autosomal gene with two alleles displaying complete dominance: the dominant allele DD confers dark fur, while the recessive allele dd confers sandy-colored fur. The baseline frequency of the recessive allele is q0=0.50q_0 = 0.50. A basalt lava flow covers the habitat, shifting the environment to dark rock. In this new habitat, sandy mice are more visible to avian predators, resulting in relative fitness values of wDD=1.0w_{DD} = 1.0, wDd=1.0w_{Dd} = 1.0, and wdd=0.60w_{dd} = 0.60 (selection coefficient against light mice s=0.40s = 0.40). Assuming the population is in Hardy-Weinberg equilibrium immediately prior to the environmental shift, calculate: (1) the mean relative fitness of the population (wˉ\bar{w}) in the first generation after selection, and (2) the new frequency of the recessive allele (q1q_1) after one generation of natural selection. Express both values to three significant figures.

Answer and steps

Final answer

wˉ=0.900\bar{w} = 0.900, q1=0.444q_1 = 0.444

Steps

01

Determine the initial genotype frequencies before selection

Prior to the environmental shift, the population is in Hardy-Weinberg equilibrium with an initial recessive allele frequency of q0=0.50q_0 = 0.50.

The frequency of the dominant allele DD is: p0=1−q0=1−0.50=0.50p_0 = 1 - q_0 = 1 - 0.50 = 0.50

Using the Hardy-Weinberg expansion, the initial genotype frequencies are:

  • Frequency of DDDD: f(DD)=p02=(0.50)2=0.25f(DD) = p_0^2 = (0.50)^2 = 0.25
  • Frequency of DdDd: f(Dd)=2p0q0=2(0.50)(0.50)=0.50f(Dd) = 2p_0 q_0 = 2(0.50)(0.50) = 0.50
  • Frequency of dddd: f(dd)=q02=(0.50)2=0.25f(dd) = q_0^2 = (0.50)^2 = 0.25

02

Calculate the mean relative fitness (wˉ\bar{w})

The mean fitness (wˉ\bar{w}) represents the average reproductive success of the population, calculated as the weighted sum of each genotype's initial frequency multiplied by its relative fitness (ww):

wˉ=f(DD)wDD+f(Dd)wDd+f(dd)wdd\bar{w} = f(DD)w_{DD} + f(Dd)w_{Dd} + f(dd)w_{dd}

Substitute the known values: wˉ=(0.25⋅1.0)+(0.50⋅1.0)+(0.25⋅0.60)\bar{w} = (0.25 \cdot 1.0) + (0.50 \cdot 1.0) + (0.25 \cdot 0.60) wˉ=0.25+0.50+0.15=0.900\bar{w} = 0.25 + 0.50 + 0.15 = 0.900


03

Calculate the allele frequency after selection (q1q_1)

Following selection, the contribution of each genotype to the gene pool is proportional to its post-selection frequency normalized by the mean fitness wˉ\bar{w}.

The recessive allele dd is carried by both heterozygotes (DdDd, contributing half of their alleles) and recessive homozygotes (dddd, contributing all of their alleles):

q1=12f(Dd)wDd+f(dd)wddwˉq_1 = \frac{\frac{1}{2} f(Dd)w_{Dd} + f(dd)w_{dd}}{\bar{w}}

Substitute the values: q1=12(0.50⋅1.0)+(0.25⋅0.60)0.900q_1 = \frac{\frac{1}{2}(0.50 \cdot 1.0) + (0.25 \cdot 0.60)}{0.900} q1=0.25+0.150.900=0.400.900=49≈0.444q_1 = \frac{0.25 + 0.15}{0.900} = \frac{0.40}{0.900} = \frac{4}{9} \approx 0.444

Common Pitfall: A frequent mistake is dividing the post-selection gametic contribution (0.400.40) by 1.01.0 instead of normalizing by the population's mean fitness (wˉ=0.900\bar{w} = 0.900). Because natural selection eliminates a fraction of the sandy individuals, the total surviving pool is reduced, making normalization by wˉ\bar{w} necessary to obtain valid frequencies that sum to 11.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets that heterozygotes carry the recessive allele and computes q₁ considering only surviving recessive homozygotes.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    p0=1−0.50=0.50  ⟹  p02=0.25,  2p0q0=0.50,  q02=0.25p_0 = 1 - 0.50 = 0.50 \implies p_0^2 = 0.25,\; 2p_0 q_0 = 0.50,\; q_0^2 = 0.25

  2. Step 2

    wˉ=0.25(1.0)+0.50(1.0)+0.25(0.60)=0.900\bar{w} = 0.25(1.0) + 0.50(1.0) + 0.25(0.60) = 0.900

  3. Step 3

    q1=q02⋅wddwˉq_1 = \frac{q_0^2 \cdot w_{dd}}{\bar{w}}

    Correct

    q1=12f(Dd)wDd+f(dd)wddwˉ=p0q0wDd+q02wddwˉq_1 = \frac{\frac{1}{2} f(Dd)w_{Dd} + f(dd)w_{dd}}{\bar{w}} = \frac{p_0 q_0 w_{Dd} + q_0^2 w_{dd}}{\bar{w}}

    You calculated the post-selection genotype frequency of homozygous recessive individuals (dddd) rather than the total frequency of the recessive allele (dd). In diploid organisms, heterozygotes (DdDd) also carry one copy of the recessive allele, so their surviving contribution must be included.

  4. Step 4

    q1=0.150.900  ⟹  q1=0.167q_1 = \frac{0.15}{0.900} \implies q_1 = 0.167

    Correct

    q1=12(0.50⋅1.0)+(0.25⋅0.60)0.900=0.25+0.150.900≈0.444q_1 = \frac{\frac{1}{2}(0.50 \cdot 1.0) + (0.25 \cdot 0.60)}{0.900} = \frac{0.25 + 0.15}{0.900} \approx 0.444

    Because the numerator omitted the gametes contributed by DdDd heterozygotes, your final evaluation resulted in 0.1670.167 instead of 0.4440.444.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly computed the dominant allele frequency from q0q_0.

You accurately derived the initial Hardy-Weinberg genotype frequencies.

You set up and evaluated the mean relative fitness wˉ=0.900\bar{w} = 0.900 without error.

You correctly recognized that post-selection values must be normalized by wˉ\bar{w}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of heterozygous carriers in allele frequency calculation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the post-selection frequency of the recessive genotype (dddd) with the post-selection frequency of the recessive allele (dd), forgetting that heterozygotes (DdDd) also pass on the dd allele.

REASONING PATH
Your ACEpath teacher’s suggested approach
Allele contribution vs. genotype frequency
  • An allele's frequency is the proportion of total gametes carrying that allele: q1=f′(Dd)/2+f′(dd)wˉq_1 = \frac{f'(Dd)/2 + f'(dd)}{\bar{w}}.

  • Whenever calculating an allele frequency from diploid genotypes, always remember to add half the surviving heterozygote frequency: 12f(Dd)wDd\frac{1}{2} f(Dd) w_{Dd}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify all genotypes carrying the recessive allele dd: both DdDd (which contributes half its alleles as dd) and dddd (which contributes all its alleles as dd).

  2. Write the weighted post-selection contribution for allele dd: Numerator=12f(Dd)wDd+f(dd)wdd=12(0.50×1.0)+(0.25×0.60)=0.25+0.15=0.40\text{Numerator} = \frac{1}{2} f(Dd)w_{Dd} + f(dd)w_{dd} = \frac{1}{2}(0.50 \times 1.0) + (0.25 \times 0.60) = 0.25 + 0.15 = 0.40.

  3. Divide by the mean relative fitness to normalize: q1=0.400.900=49≈0.444q_1 = \frac{0.40}{0.900} = \frac{4}{9} \approx 0.444.

Final answer

wˉ=0.900,  q1=0.444\bar{w} = 0.900,\; q_1 = 0.444

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between genotype frequency f(dd)f(dd) and allele frequency q=f(dd)+12f(Dd)q = f(dd) + \frac{1}{2}f(Dd).

  • Practice tracking alleles through gamete pools rather than whole individual counts after selection.

OverviewACEpath Teacher's Diagnosis

02 The student fails to normalize by the mean fitness of the population when calculating allele frequency after selection.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    p0=0.50,  q0=0.50  ⟹  p02=0.25,  2p0q0=0.50,  q02=0.25p_0 = 0.50,\; q_0 = 0.50 \implies p_0^2 = 0.25,\; 2p_0 q_0 = 0.50,\; q_0^2 = 0.25

  2. Step 2

    wˉ=0.25(1.0)+0.50(1.0)+0.25(0.60)=0.900\bar{w} = 0.25(1.0) + 0.50(1.0) + 0.25(0.60) = 0.900

  3. Step 3

    q1=p0q0⋅wDd+q02⋅wdd  ⟹  q1=0.25(1.0)+0.25(0.60)  ⟹  q1=0.400q_1 = p_0 q_0 \cdot w_{Dd} + q_0^2 \cdot w_{dd} \implies q_1 = 0.25(1.0) + 0.25(0.60) \implies q_1 = 0.400

    Correct

    q1=p0q0⋅wDd+q02⋅wddwˉ=0.4000.900≈0.444q_1 = \frac{p_0 q_0 \cdot w_{Dd} + q_0^2 \cdot w_{dd}}{\bar{w}} = \frac{0.400}{0.900} \approx 0.444

    You calculated the raw post-selection contribution of the dd allele (0.4000.400), but you did not divide by the mean relative fitness wˉ\bar{w}. Because natural selection removes individuals from the population, the total surviving gene pool is reduced to wˉ\bar{w}, requiring division by wˉ\bar{w} to re-normalize the allele frequency so that p1+q1=1p_1 + q_1 = 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the pre-selection genotype frequencies using Hardy-Weinberg proportions.

You accurately calculated the population's mean fitness wˉ=0.900\bar{w} = 0.900.

You correctly identified that the surviving gametic contribution of the recessive allele comes from half of the heterozygotes and all of the recessive homozygotes.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Normalization by Mean Fitness

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You omitted the denominator wˉ\bar{w} in the allele frequency update formula. Allele frequencies must always sum to 11; since selection reduces the total population size relative to the baseline, post-selection contributions must be scaled by the population's average survival wˉ\bar{w}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Post-Selection Normalization
  • q1=p0q0wDd+q02wddwˉq_1 = \frac{p_0 q_0 w_{Dd} + q_0^2 w_{dd}}{\bar{w}}

  • Always divide the weighted post-selection gametic contributions by wˉ\bar{w} so the resulting allele frequencies sum to 11.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use your raw gamete contribution 0.4000.400 from Step 3: contribution(d)=p0q0wDd+q02wdd=0.400\text{contribution}(d) = p_0 q_0 w_{Dd} + q_0^2 w_{dd} = 0.400.

  2. Divide this raw contribution by the mean fitness obtained in Step 2: q1=0.400wˉ=0.4000.900q_1 = \frac{0.400}{\bar{w}} = \frac{0.400}{0.900}.

  3. Simplify the fraction: q1=49≈0.444q_1 = \frac{4}{9} \approx 0.444.

Final answer

wˉ=0.900,  q1=0.444\bar{w} = 0.900,\; q_1 = 0.444

NEXT STEPS
Final Takeaways from Your Teacher
  • Always perform a quick sanity check: verify whether p1+q1=1p_1 + q_1 = 1. If you calculate p1=0.25(1.0)+0.25(1.0)1=0.500p_1 = \frac{0.25(1.0) + 0.25(1.0)}{1} = 0.500 and q1=0.400q_1 = 0.400, their sum is only 0.9000.900, which signals that normalization by wˉ\bar{w} is missing.

  • Practice one-generation selection problems with varying selection coefficients to solidify the formula q1=Wdwˉq_1 = \frac{W_d}{\bar{w}}.

OverviewACEpath Teacher's Diagnosis

03 The student misapplies selection directly to the allele frequency instead of genotype frequencies.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    p0=0.50, q0=0.50p_0 = 0.50,\ q_0 = 0.50

  2. Step 2

    wˉ=p0(1.0)+q0(0.60)=0.50(1.0)+0.50(0.60)=0.800\bar{w} = p_0(1.0) + q_0(0.60) = 0.50(1.0) + 0.50(0.60) = 0.800

    Correct

    wˉ=p02wDD+2p0q0wDd+q02wdd=0.25(1.0)+0.50(1.0)+0.25(0.60)=0.900\bar{w} = p_0^2 w_{DD} + 2p_0 q_0 w_{Dd} + q_0^2 w_{dd} = 0.25(1.0) + 0.50(1.0) + 0.25(0.60) = 0.900

    You calculated mean fitness by weighting allele frequencies directly. Because natural selection acts on diploid individuals (genotypes), you need to weight each genotype's Hardy-Weinberg frequency (p2p^2, 2pq2pq, q2q^2) by its respective fitness.

  3. Step 3

    q1=q0⋅wddwˉ=0.50×0.600.800=0.375q_1 = \frac{q_0 \cdot w_{dd}}{\bar{w}} = \frac{0.50 \times 0.60}{0.800} = 0.375

    Correct

    q1=p0q0wDd+q02wddwˉ=0.25+0.150.900=0.400.900≈0.444q_1 = \frac{p_0 q_0 w_{Dd} + q_0^2 w_{dd}}{\bar{w}} = \frac{0.25 + 0.15}{0.900} = \frac{0.40}{0.900} \approx 0.444

    You multiplied the initial allele frequency q0q_0 by wddw_{dd} and divided by your wˉ\bar{w}. This formula assumes only dddd individuals carry dd alleles and ignores that half of the alleles in surviving heterozygotes (DdDd) are also dd.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly established the initial allele frequencies p0=0.50p_0 = 0.50 and q0=0.50q_0 = 0.50.

You recognized that calculating post-selection frequency requires dividing by the population mean fitness wˉ\bar{w}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Applying selection to alleles instead of genotypes

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated natural selection as acting directly on individual haploid alleles rather than on diploid phenotypes/genotypes, which caused you to bypass Hardy-Weinberg genotype frequencies and miss the dd alleles sheltered within dark heterozygotes (DdDd).

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit of Selection in Diploids
  • In sexually reproducing diploid organisms, natural selection acts on phenotypic fitness determined by genotypes (DD,Dd,ddDD, Dd, dd), not directly on isolated alleles.

  • Always expand allele frequencies into Hardy-Weinberg genotype proportions (p2,2pq,q2p^2, 2pq, q^2) before applying relative fitness values (ww).

Allele Accounting After Selection
  • The post-selection frequency q1q_1 equals the sum of gametes contributed by surviving heterozygotes and recessive homozygotes, normalized by mean fitness: q1=pq⋅wDd+q2⋅wddwˉq_1 = \frac{pq \cdot w_{Dd} + q^2 \cdot w_{dd}}{\bar{w}}.

  • Include the gametic contribution of heterozygotes (frac12×2pq⋅wDd=pq⋅wDd\\frac{1}{2} \times 2pq \cdot w_{Dd} = pq \cdot w_{Dd}) whenever an allele is not strictly lethal in all carriers.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Expand initial genotype frequencies under Hardy-Weinberg equilibrium: f(DD)=p02=0.25f(DD) = p_0^2 = 0.25, f(Dd)=2p0q0=0.50f(Dd) = 2p_0 q_0 = 0.50, and f(dd)=q02=0.25f(dd) = q_0^2 = 0.25.

  2. Calculate the population mean fitness as the weighted sum of all three genotypes: wˉ=(0.25)(1.0)+(0.50)(1.0)+(0.25)(0.60)=0.25+0.50+0.15=0.900\bar{w} = (0.25)(1.0) + (0.50)(1.0) + (0.25)(0.60) = 0.25 + 0.50 + 0.15 = 0.900.

  3. Calculate the post-selection frequency of allele dd by combining the contributions from surviving DdDd and dddd genotypes: q1=0.50(0.50)(1.0)+(0.25)(0.60)0.900=0.25+0.150.900=0.4000.900≈0.444q_1 = \frac{0.50(0.50)(1.0) + (0.25)(0.60)}{0.900} = \frac{0.25 + 0.15}{0.900} = \frac{0.400}{0.900} \approx 0.444.

Final answer

wˉ=0.900, q1=0.444\bar{w} = 0.900,\ q_1 = 0.444

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting baseline allele frequencies into Hardy-Weinberg genotype frequencies before applying selection coefficients.

  • Write out the two-part numerator for q1q_1 (DdDd contribution plus dddd contribution) to ensure recessive alleles in heterozygotes are never omitted.

Lock it in

Similar question

01

A population in Hardy-Weinberg equilibrium has an initial recessive allele frequency of q0=0.40q_0 = 0.40. Selection acts against homozygous recessive individuals such that wAA=1.0w_{AA} = 1.0, wAa=1.0w_{Aa} = 1.0, and waa=0.50w_{aa} = 0.50. Calculate the mean relative fitness wˉ\bar{w} and the new allele frequency q1q_1 after one generation of selection.

Answer

wˉ=0.920\bar{w} = 0.920, q1=0.348q_1 = 0.348. Key steps: p0=0.60p_0 = 0.60. Genotype frequencies are f(AA)=0.36f(AA) = 0.36, f(Aa)=0.48f(Aa) = 0.48, f(aa)=0.16f(aa) = 0.16. Mean fitness wˉ=0.36(1.0)+0.48(1.0)+0.16(0.50)=0.36+0.48+0.08=0.920\bar{w} = 0.36(1.0) + 0.48(1.0) + 0.16(0.50) = 0.36 + 0.48 + 0.08 = 0.920. Surviving contribution to allele aa is 12(0.48)(1.0)+(0.16)(0.50)=0.24+0.08=0.32\frac{1}{2}(0.48)(1.0) + (0.16)(0.50) = 0.24 + 0.08 = 0.32. Normalizing gives q1=0.320.920≈0.348q_1 = \frac{0.32}{0.920} \approx 0.348.

02

Consider a lethal recessive trait where wAA=1.0w_{AA} = 1.0, wAa=1.0w_{Aa} = 1.0, and waa=0w_{aa} = 0 (complete selection against homozygotes). If the initial frequency of the recessive allele is q0=0.20q_0 = 0.20, determine q1q_1 after one generation. Show how the surviving heterozygotes determine the outcome.

Answer

q1=0.167q_1 = 0.167 (or 16\frac{1}{6}). Key steps: p0=0.80p_0 = 0.80. wˉ=p02(1)+2p0q0(1)+q02(0)=1−q02=1−0.04=0.96\bar{w} = p_0^2(1) + 2p_0q_0(1) + q_0^2(0) = 1 - q_0^2 = 1 - 0.04 = 0.96. Recessive homozygotes contribute zero alleles. All surviving aa alleles come exclusively from heterozygotes: numerator =12(2p0q0)(1.0)=p0q0=(0.80)(0.20)=0.16= \frac{1}{2}(2p_0q_0)(1.0) = p_0 q_0 = (0.80)(0.20) = 0.16. Thus, q1=0.160.96=16≈0.167q_1 = \frac{0.16}{0.96} = \frac{1}{6} \approx 0.167 (or using q1=q01+q0=0.201.20=16q_1 = \frac{q_0}{1 + q_0} = \frac{0.20}{1.20} = \frac{1}{6}).

03

In a plant population, codominance is observed at a flower-color locus (CRCRC^R C^R red, CRCWC^R C^W pink, CWCWC^W C^W white). Initial frequencies are p0=f(CR)=0.30p_0 = f(C^R) = 0.30 and q0=f(CW)=0.70q_0 = f(C^W) = 0.70. A pollinator preference results in relative fitness values of wRR=1.0w_{RR} = 1.0, wRW=0.80w_{RW} = 0.80, and wWW=0.50w_{WW} = 0.50. Calculate the population mean fitness wˉ\bar{w} and the new allele frequency q1=f(CW)q_1 = f(C^W) after one generation.

Answer

wˉ=0.671\bar{w} = 0.671, q1=0.615q_1 = 0.615. Key steps: Initial genotype frequencies are f(RR)=0.09f(RR) = 0.09, f(RW)=0.42f(RW) = 0.42, f(WW)=0.49f(WW) = 0.49. Mean fitness wˉ=0.09(1.0)+0.42(0.80)+0.49(0.50)=0.09+0.336+0.245=0.671\bar{w} = 0.09(1.0) + 0.42(0.80) + 0.49(0.50) = 0.09 + 0.336 + 0.245 = 0.671. Post-selection contribution for allele CWC^W comes from pink heterozygotes (half) and white homozygotes (all): numerator =12(0.42×0.80)+(0.49×0.50)=0.168+0.245=0.413= \frac{1}{2}(0.42 \times 0.80) + (0.49 \times 0.50) = 0.168 + 0.245 = 0.413. Normalizing gives q1=0.4130.671≈0.615q_1 = \frac{0.413}{0.671} \approx 0.615.

Loading workspace…