Resources

Following a marine mass extinction event, an ammonoid clade radiated into vacant pelagic zones. The survivorship of species within this radiating clade follows an exponential decay model N(t)=N0e−mtN(t) = N_0 e^{-m t}, where mm is the species extinction risk coefficient. Simultaneously, body size LL (in cm\text{cm}) across the radiation increases over evolutionary time according to Cope's rule: L(t)=L0(1+0.040t)L(t) = L_0 (1 + 0.040 t), with L0=2.50 cmL_0 = 2.50\text{ cm} and tt measured in millions of years (Myr\text{Myr}). If physiological metabolic scaling dictates that extinction vulnerability couples to body length such that m(L)=0.020⋅[L(t)]1.5m(L) = 0.020 \cdot [L(t)]^{1.5}, calculate the instantaneous per-capita extinction coefficient mm (in Myr−1\text{Myr}^{-1}) at t=15.0 Myrt = 15.0\text{ Myr} post-extinction. Express your answer to three significant figures.

Answer and steps

Final answer

m=0.160 Myr−1m = 0.160\text{ Myr}^{-1}

Steps

01

Calculate body length L(t)L(t) at t=15.0 Myrt = 15.0\text{ Myr}

Method: Direct Functional Substitution

To find the instantaneous extinction coefficient mm at a specific point in evolutionary time, we couple the morphological evolutionary trajectory (Cope's rule) with the physiological-ecological scaling law.

According to the given linear model for Cope's rule: L(t)=L0(1+0.040t)L(t) = L_0 (1 + 0.040 t)

Substitute the initial length L0=2.50 cmL_0 = 2.50\text{ cm} and time t=15.0 Myrt = 15.0\text{ Myr}: L(15.0)=2.50⋅(1+0.040⋅15.0)L(15.0) = 2.50 \cdot (1 + 0.040 \cdot 15.0) L(15.0)=2.50⋅(1+0.600)=2.50⋅1.60=4.00 cmL(15.0) = 2.50 \cdot (1 + 0.600) = 2.50 \cdot 1.60 = 4.00\text{ cm}


02

Calculate the extinction risk coefficient mm from body length

The scaling equation relates extinction risk mm to body length LL: m(L)=0.020⋅[L(t)]1.5m(L) = 0.020 \cdot [L(t)]^{1.5}

Substitute L(15.0)=4.00 cmL(15.0) = 4.00\text{ cm}: m=0.020⋅(4.00)1.5m = 0.020 \cdot (4.00)^{1.5}

Evaluating the exponent: (4.00)1.5=(4.001/2)3=2.003=8.00(4.00)^{1.5} = (4.00^{1/2})^3 = 2.00^3 = 8.00

Now multiply by the scaling coefficient: m=0.020⋅8.00=0.160 Myr−1m = 0.020 \cdot 8.00 = 0.160\text{ Myr}^{-1}


Biological Context and Common Pitfalls

  • Biological Rationale: Cope's rule posits that lineages tend to increase in body size over macroevolutionary timescales. However, larger body size is often correlated with lower population densities, larger home ranges, and slower reproductive turnover, which physiologically and ecologically elevates extinction susceptibility (mm).
  • Common Pitfall: Do not confuse the instantaneous per-capita extinction rate m(t)m(t) with the number of surviving lineages N(t)N(t). The question asks directly for mm, which is evaluated through the function composition m(t)=m(L(t))m(t) = m(L(t)).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to raise body size to the 1.5 power when evaluating the scaling formula, treating m as directly proportional to length.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    L(15.0)=2.50⋅(1+0.040⋅15.0)  ⟹  L(15.0)=2.50⋅1.60=4.00 cmL(15.0) = 2.50 \cdot (1 + 0.040 \cdot 15.0) \implies L(15.0) = 2.50 \cdot 1.60 = 4.00\text{ cm}

  2. Step 2

    m=0.020⋅4.00=0.0800 Myr−1m = 0.020 \cdot 4.00 = 0.0800\text{ Myr}^{-1}

    Correct

    m=0.020⋅[4.00]1.5=0.020⋅8.00=0.160 Myr−1m = 0.020 \cdot [4.00]^{1.5} = 0.020 \cdot 8.00 = 0.160\text{ Myr}^{-1}

    You multiplied the coefficient directly by LL rather than raising LL to the exponent 1.51.5 as defined by m(L)=0.020⋅[L(t)]1.5m(L) = 0.020 \cdot [L(t)]^{1.5}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the evolved body length at 15.0 Myr15.0\text{ Myr} using the linear model for Cope's rule.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted allometric exponent

You evaluated 0.020⋅L0.020 \cdot L instead of 0.020⋅L1.50.020 \cdot L^{1.5}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating an allometric power-law relationship as a simple linear proportion by dropping the fractional power (1.51.5) during numerical substitution.

REASONING PATH
Your ACEpath teacher’s suggested approach
Inspect Allometric Exponents
  • Biological allometric scaling laws typically take the power-law form Y=aXbY = a X^b, where b≠1b \neq 1.

  • Before evaluating your expression, highlight any non-unity exponent bb and ensure it is evaluated before multiplying by the prefactor aa.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write out the scaling function with its full exponent: m=0.020⋅[L(15.0)]1.5m = 0.020 \cdot [L(15.0)]^{1.5}.

  2. Substitute L=4.00 cmL = 4.00\text{ cm}: m=0.020⋅(4.00)1.5m = 0.020 \cdot (4.00)^{1.5}.

  3. Evaluate the fractional power: (4.00)1.5=(4.00)3=2.003=8.00(4.00)^{1.5} = (\sqrt{4.00})^3 = 2.00^3 = 8.00.

  4. Multiply by the coefficient: m=0.020⋅8.00=0.160 Myr−1m = 0.020 \cdot 8.00 = 0.160\text{ Myr}^{-1}.

Final answer

m=0.160 Myr−1m = 0.160\text{ Myr}^{-1}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how allometric scaling laws relate morphological traits to physiological and macroevolutionary rates.

  • Practice evaluating non-integer powers like x1.5x^{1.5} as x3/2=(x)3x^{3/2} = (\sqrt{x})^3 before combining them with constants.

OverviewACEpath Teacher's Diagnosis

02 The student miscalculates the 1.5 power by multiplying by 1.5 instead of raising to the 1.5 power.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    L=2.50⋅(1+0.040⋅15.0)=4.00 cmL = 2.50 \cdot (1 + 0.040 \cdot 15.0) = 4.00\text{ cm}

  2. Step 2

    4.001.5=4.00⋅1.5=6.004.00^{1.5} = 4.00 \cdot 1.5 = 6.00

    Correct

    4.001.5=(4.001/2)3=2.003=8.004.00^{1.5} = (4.00^{1/2})^3 = 2.00^3 = 8.00

    You multiplied the base by 1.51.5 rather than raising it to the power of 1.51.5. Raising a number to the power 1.5=321.5 = \frac{3}{2} means taking the square root and cubing the result.

  3. Step 3

    m=0.020⋅6.00=0.120 Myr−1m = 0.020 \cdot 6.00 = 0.120\text{ Myr}^{-1}

    Correct

    m=0.020⋅8.00=0.160 Myr−1m = 0.020 \cdot 8.00 = 0.160\text{ Myr}^{-1}

    You carried through the multiplication correctly using your value from Step 2, but the result is affected by the earlier exponent error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and applied Cope's rule equation to calculate L(15.0)=4.00 cmL(15.0) = 4.00\text{ cm}.

You substituted your intermediate value into the scaling equation with the correct units and significant figures.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Exponentiation Confused with Multiplication

You wrote 4.001.5=4.00⋅1.54.00^{1.5} = 4.00 \cdot 1.5 instead of evaluating 4.003/24.00^{3/2}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated raising a base to a decimal exponent with multiplying the base by that decimal value.

REASONING PATH
Your ACEpath teacher’s suggested approach
Fractional Exponent Rule
  • For any positive base aa, a1.5=a3/2=(a)3a^{1.5} = a^{3/2} = (\sqrt{a})^3, whereas a⋅1.5=1.5aa \cdot 1.5 = 1.5a.

  • Whenever you encounter a decimal exponent like 1.51.5, convert it to the fraction 32\frac{3}{2} and evaluate the root before applying the power.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the exponent to a fraction: 4.001.5=4.003/2=(4.00)3=2.003=8.004.00^{1.5} = 4.00^{3/2} = (\sqrt{4.00})^3 = 2.00^3 = 8.00.

  2. Multiply by the metabolic scaling factor: m=0.020⋅8.00=0.160 Myr−1m = 0.020 \cdot 8.00 = 0.160\text{ Myr}^{-1}.

Final answer

m=0.160 Myr−1m = 0.160\text{ Myr}^{-1}

NEXT STEPS
Final Takeaways from Your Teacher
  • Rewrite decimal powers as rational exponents (x1.5=x3/2=x3x^{1.5} = x^{3/2} = \sqrt{x^3}) before calculating.

  • Check that x1.5>xx^{1.5} > x for any base x>1x > 1 by recalling that exponents represent repeated multiplication, not linear scaling.

OverviewACEpath Teacher's Diagnosis

03 The student evaluates body length without adding 1 inside the parenthesis of Cope's rule, using 0.040 · t instead of (1 + 0.040 · t).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    L=2.50⋅(0.040⋅15.0)=2.50⋅0.60=1.50 cmL = 2.50 \cdot (0.040 \cdot 15.0) = 2.50 \cdot 0.60 = 1.50\text{ cm}

    Correct

    L(15.0)=2.50⋅(1+0.040⋅15.0)=2.50⋅1.60=4.00 cmL(15.0) = 2.50 \cdot (1 + 0.040 \cdot 15.0) = 2.50 \cdot 1.60 = 4.00\text{ cm}

    You omitted the 1+1 + inside the parentheses from Cope's rule L(t)=L0(1+0.040t)L(t) = L_0 (1 + 0.040 t). Calculating only the growth increment L0⋅0.040tL_0 \cdot 0.040 t yielded 1.50 cm1.50\text{ cm}, which would imply that the organisms shrank below their initial size of 2.50 cm2.50\text{ cm} despite Cope's rule predicting phyletic size increase.

  2. Step 2

    m=0.020⋅(1.50)1.5=0.020⋅1.837=0.0367 Myr−1m = 0.020 \cdot (1.50)^{1.5} = 0.020 \cdot 1.837 = 0.0367\text{ Myr}^{-1}

    Correct

    m=0.020⋅(4.00)1.5=0.020⋅8.00=0.160 Myr−1m = 0.020 \cdot (4.00)^{1.5} = 0.020 \cdot 8.00 = 0.160\text{ Myr}^{-1}

    You correctly evaluated the allometric power function m=0.020⋅L1.5m = 0.020 \cdot L^{1.5}, but your final numerical value was thrown off by substituting the incorrect length from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly coupled body length to the allometric metabolic scaling equation m(L)=0.020⋅[L(t)]1.5m(L) = 0.020 \cdot [L(t)]^{1.5}.

You carried out the fractional exponent calculation and rounding accurately based on your intermediate value.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of baseline term in linear growth formula

You wrote (0.040⋅15.0)(0.040 \cdot 15.0) instead of (1+0.040⋅15.0)(1 + 0.040 \cdot 15.0), calculating the net growth increment rather than the total updated body length.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating relative growth increment with total size. In linear evolutionary models of the form L(t)=L0(1+rt)L(t) = L_0(1 + r t), the term 11 represents the baseline ancestral dimension (100%100\% of L0L_0), while rtr t is the fractional increase over time. Omitting the 11 calculates only the added length rather than the accumulated length.

REASONING PATH
Your ACEpath teacher’s suggested approach
Biological Reality Check
  • Cope's rule describes phyletic size increase over macroevolutionary time, meaning L(t)≥L0L(t) \ge L_0 for all t>0t > 0.

  • Always verify that your computed body size at t>0t > 0 is strictly larger than the ancestral size L0=2.50 cmL_0 = 2.50\text{ cm}.

Total Size vs. Size Increment
  • L(t)=L0+ΔL=L0(1+rt)L(t) = L_0 + \Delta L = L_0(1 + r t), whereas ΔL=L0rt\Delta L = L_0 r t.

  • Ensure you retain the term (1+rt)(1 + r t) inside the parentheses when evaluating the total trait value at time tt.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the full linear growth model: L(15.0)=2.50⋅(1+0.040⋅15.0)=2.50⋅(1+0.600)=4.00 cmL(15.0) = 2.50 \cdot (1 + 0.040 \cdot 15.0) = 2.50 \cdot (1 + 0.600) = 4.00\text{ cm}.

  2. Substitute L=4.00 cmL = 4.00\text{ cm} into the allometric vulnerability function: m=0.020⋅(4.00)1.5m = 0.020 \cdot (4.00)^{1.5}.

  3. Evaluate (4.00)1.5=(4.00)3=2.003=8.00(4.00)^{1.5} = (\sqrt{4.00})^3 = 2.00^3 = 8.00.

  4. Calculate m=0.020⋅8.00=0.160 Myr−1m = 0.020 \cdot 8.00 = 0.160\text{ Myr}^{-1}.

Final answer

m=0.160 Myr−1m = 0.160\text{ Myr}^{-1}

NEXT STEPS
Final Takeaways from Your Teacher
  • Re-evaluate the Cope's rule formula ensuring the initial baseline factor 11 is preserved.

  • Perform a sanity check on macroevolutionary trends: confirm that calculated sizes expand over time rather than contract.

  • Practice distinguishing total state variables y(t)=y0(1+rt)y(t) = y_0(1 + r t) from their accumulated change Δy=y0rt\Delta y = y_0 r t in ecological models.

Lock it in

Similar question

01

A gastropod lineage increases in shell diameter DD according to Cope's rule such that D=9.0 mmD = 9.0\text{ mm} at t=10 Myrt = 10\text{ Myr}. If per-capita predation vulnerability scales allometrically as v(D)=0.050⋅D1.5v(D) = 0.050 \cdot D^{1.5}, calculate vv at this time point to two significant figures.

Answer

v=1.4 Myr−1v = 1.4\text{ Myr}^{-1}. Key step: D1.5=9.01.5=(9.0)3=27D^{1.5} = 9.0^{1.5} = (\sqrt{9.0})^3 = 27; then v=0.050⋅27=1.35≈1.4v = 0.050 \cdot 27 = 1.35 \approx 1.4.

02

In a post-extinction radiation of bivalves, initial length is L0=1.00 cmL_0 = 1.00\text{ cm} and grows as L(t)=L0(1+0.125t)L(t) = L_0 (1 + 0.125 t), with tt in Myr\text{Myr}. Extinction risk follows m(L)=0.010⋅L2.5m(L) = 0.010 \cdot L^{2.5}. Determine mm at t=24.0 Myrt = 24.0\text{ Myr}.

Answer

m=0.320 Myr−1m = 0.320\text{ Myr}^{-1}. Key steps: L(24.0)=1.00⋅(1+0.125⋅24.0)=1.00⋅(1+3.00)=4.00 cmL(24.0) = 1.00 \cdot (1 + 0.125 \cdot 24.0) = 1.00 \cdot (1 + 3.00) = 4.00\text{ cm}. Then m=0.010⋅(4.00)2.5=0.010⋅(4.00)5=0.010⋅32.0=0.320 Myr−1m = 0.010 \cdot (4.00)^{2.5} = 0.010 \cdot (\sqrt{4.00})^5 = 0.010 \cdot 32.0 = 0.320\text{ Myr}^{-1}.

03

Suppose lineage body mass MM (in kg\text{kg}) increases exponentially as M(t)=M0e0.020tM(t) = M_0 e^{0.020 t} with M0=1.0 kgM_0 = 1.0\text{ kg}. If mass-specific metabolic rate (and thus vulnerability) scales as B(M)=3.0⋅M−0.25B(M) = 3.0 \cdot M^{-0.25}, find the ratio of vulnerability at t=50 Myrt = 50\text{ Myr} to initial vulnerability at t=0t = 0.

Answer

Ratio≈0.78\text{Ratio} \approx 0.78. Key steps: M(50)=1.0⋅e1.0=e kgM(50) = 1.0 \cdot e^{1.0} = e\text{ kg}. The ratio is B(M(50))B(M(0))=3.0⋅(e)−0.253.0⋅(1.0)−0.25=e−0.25=1e0.25≈0.7788≈0.78\frac{B(M(50))}{B(M(0))} = \frac{3.0 \cdot (e)^{-0.25}}{3.0 \cdot (1.0)^{-0.25}} = e^{-0.25} = \frac{1}{e^{0.25}} \approx 0.7788 \approx 0.78.

Loading workspace…