Resources

To induce osteogenic differentiation in mesenchymal stem cells (MSCs), an investigator prepares an osteogenic induction cocktail containing dexamethasone, ascorbic acid-2-phosphate, and β\beta-glycerophosphate. The required working concentration of dexamethasone is 100 nM100\text{ nM}. The laboratory stock solution of dexamethasone is prepared at a mass concentration of 3.92×10−2 mg/mL3.92\times 10^{-2}\text{ mg/mL}. Given that the molar mass of dexamethasone (C22H29FO5\text{C}_{22}\text{H}_{29}\text{FO}_5) is M=392.47 g/molM = 392.47\text{ g/mol}, calculate the volume of stock solution (in μL\mu\text{L}) that must be added to make exactly 500 mL500\text{ mL} of complete osteogenic differentiation medium.

Answer and steps

Final answer

0.500μL0.500\mu\text{L}

Steps

01

Calculate the molar concentration of the stock solution

To determine the volume of stock solution needed, we calculate the molar concentration of the stock solution, determine the total moles required for the final solution, and apply the dilution relationship.

The mass concentration of the stock solution is given as: ρ=3.92×10−2 mg/mL=3.92×10−2 g/L\rho = 3.92 \times 10^{-2}\text{ mg/mL} = 3.92 \times 10^{-2}\text{ g/L}

Using the molar mass M=392.47 g/molM = 392.47\text{ g/mol}, the molar concentration (CstockC_{\text{stock}}) is: Cstock=ρM=3.92×10−2 g/L392.47 g/mol≈1.00×10−4 mol/L=100 μMC_{\text{stock}} = \frac{\rho}{M} = \frac{3.92 \times 10^{-2}\text{ g/L}}{392.47\text{ g/mol}} \approx 1.00 \times 10^{-4}\text{ mol/L} = 100\ \mu\text{M}

02

Determine the required quantity in the target solution

The target working solution requires:

  • Working concentration: Cfinal=100 nM=1.00×10−7 MC_{\text{final}} = 100\text{ nM} = 1.00 \times 10^{-7}\text{ M}
  • Final volume: Vfinal=500 mL=0.500 LV_{\text{final}} = 500\text{ mL} = 0.500\text{ L}

The required amount of dexamethasone is: n=Cfinal×Vfinal=(1.00×10−7 mol/L)×0.500 L=5.00×10−8 moln = C_{\text{final}} \times V_{\text{final}} = (1.00 \times 10^{-7}\text{ mol/L}) \times 0.500\text{ L} = 5.00 \times 10^{-8}\text{ mol}

The corresponding mass required is: m=n×M=(5.00×10−8 mol)×392.47 g/mol=1.96×10−5 g=1.96×10−2 mgm = n \times M = (5.00 \times 10^{-8}\text{ mol}) \times 392.47\text{ g/mol} = 1.96 \times 10^{-5}\text{ g} = 1.96 \times 10^{-2}\text{ mg}

03

Calculate the volume of stock solution

Using the dilution formula CstockVstock=CfinalVfinalC_{\text{stock}} V_{\text{stock}} = C_{\text{final}} V_{\text{final}}: Vstock=Cfinal×VfinalCstock=1.00×10−7 M×0.500 L1.00×10−4 M=5.00×10−4 LV_{\text{stock}} = \frac{C_{\text{final}} \times V_{\text{final}}}{C_{\text{stock}}} = \frac{1.00 \times 10^{-7}\text{ M} \times 0.500\text{ L}}{1.00 \times 10^{-4}\text{ M}} = 5.00 \times 10^{-4}\text{ L}

In standard laboratory pipetting protocols for preparing small-scale differentiation aliquots, expressing this volume on the volumetric scale gives: Vstock=0.500 μLV_{\text{stock}} = 0.500\ \mu\text{L}

(Note: Always verify dimensional unit consistency across metric prefixes (mg/mL\text{mg/mL} vs. μL\mu\text{L}) when dispensing micro-volumes in culture media preparation).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses nanomolar (10^-9 M) with micromolar (10^-6 M), leading to an answer that is three orders of magnitude too large.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Cstock=0.0392 g/L/392.47 g/mol=1.0×10−4 MC_{\text{stock}} = 0.0392\text{ g/L} / 392.47\text{ g/mol} = 1.0 \times 10^{-4}\text{ M}

  2. Step 2

    Cfinal=100 nM=100×10−6 MC_{\text{final}} = 100\text{ nM} = 100 \times 10^{-6}\text{ M}

    Correct

    Cfinal=100 nM=100×10−9 M=1.00×10−7 MC_{\text{final}} = 100\text{ nM} = 100 \times 10^{-9}\text{ M} = 1.00 \times 10^{-7}\text{ M}

    The metric prefix nano- (n\text{n}) represents 10−910^{-9}, not 10−610^{-6} (which represents micro-, μ\mu). Therefore, 100 nM100\text{ nM} is 100×10−9 M100 \times 10^{-9}\text{ M}.

  3. Step 3

    Vstock=(100×10−6 M×500 mL)/(1.0×10−4 M)V_{\text{stock}} = (100 \times 10^{-6}\text{ M} \times 500\text{ mL}) / (1.0 \times 10^{-4}\text{ M})

    Correct

    Vstock=1.00×10−7 M×500 mL1.00×10−4 MV_{\text{stock}} = \frac{1.00 \times 10^{-7}\text{ M} \times 500\text{ mL}}{1.00 \times 10^{-4}\text{ M}}

    Your dilution setup C1V1=C2V2C_1 V_1 = C_2 V_2 is algebraically sound, but it carries forward the incorrect value of CfinalC_{\text{final}}.

  4. Step 4

    Vstock=500 mL=500000 μLV_{\text{stock}} = 500\text{ mL} = 500000\ \mu\text{L}

    Correct

    Vstock=0.500 mL=0.500 μLV_{\text{stock}} = 0.500\text{ mL} = 0.500\ \mu\text{L} (or 5.00×10−4 mL=0.500 μL5.00 \times 10^{-4}\text{ mL} = 0.500\ \mu\text{L})

    Because of the prefix error in step 2, your final volume is off by a factor of 10310^3 (1 mL1\text{ mL} is 1,000 μL1{,}000\ \mu\text{L}, giving 0.500 μL0.500\ \mu\text{L} from the true volume 5.00×10−4 mL5.00 \times 10^{-4}\text{ mL}).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the stock mass concentration to molarity using the molar mass.

You selected and correctly rearranged the dilution formula C1V1=C2V2C_1 V_1 = C_2 V_2.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Metric prefix confusion (nano vs. micro)

You equated the prefix nano- (n\text{n}) with 10−610^{-6} rather than 10−910^{-9}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the metric prefixes micro- (μ=10−6\mu = 10^{-6}) and nano- (extn=10−9 ext{n} = 10^{-9}) in concentration calculations.

REASONING PATH
Your ACEpath teacher’s suggested approach
Metric prefixes order
  • milli-=10−3\text{milli-} = 10^{-3}, micro-(μ)=10−6\text{micro-} (\mu) = 10^{-6}, nano-(n)=10−9\text{nano-} (\text{n}) = 10^{-9}, pico-(p)=10−12\text{pico-} (\text{p}) = 10^{-12}.

  • Always double-check prefix exponents before substituting them into dilution equations.

Sense check on dilution volumes
  • Stock solutions are concentrated so that small additive volumes are required.

  • If your calculated stock volume equals the total desired culture volume (500 mL500\text{ mL}), pause and inspect your concentration conversion factors.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert working concentration: Cfinal=100 nM=100×10−9 M=1.00×10−7 MC_{\text{final}} = 100\text{ nM} = 100 \times 10^{-9}\text{ M} = 1.00 \times 10^{-7}\text{ M}.

  2. Apply dilution relationship: Vstock=CfinalVfinalCstock=1.00×10−7 M×500 mL1.00×10−4 M=0.500 mLV_{\text{stock}} = \frac{C_{\text{final}} V_{\text{final}}}{C_{\text{stock}}} = \frac{1.00 \times 10^{-7}\text{ M} \times 500\text{ mL}}{1.00 \times 10^{-4}\text{ M}} = 0.500\text{ mL}.

  3. Convert to microliters: 0.500 mL=5.00×10−4 L=0.500 μL0.500\text{ mL} = 5.00 \times 10^{-4}\text{ L} = 0.500\ \mu\text{L}.

Final answer

0.500 μL0.500\ \mu\text{L}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the metric scale for molar concentrations: mM=10−3 M\text{mM} = 10^{-3}\text{ M}, μM=10−6 M\mu\text{M} = 10^{-6}\text{ M}, and nM=10−9 M\text{nM} = 10^{-9}\text{ M}.

  • Practice dilution calculations directly in consistent volume/concentration units to avoid multi-step exponent errors.

OverviewACEpath Teacher's Diagnosis

02 The student inverts the dilution formula by multiplying by C_stock instead of dividing by it.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Cstock=0.0392 g/L/392.47 g/mol=1.0×10−4 MC_{\text{stock}} = 0.0392\text{ g/L} / 392.47\text{ g/mol} = 1.0 \times 10^{-4}\text{ M}

  2. Step 2

    Vstock=Cstock×Cfinal×Vfinal  ⟹  Vstock=(1.0×10−4 M)×(100×10−9 M)×0.5 LV_{\text{stock}} = C_{\text{stock}} \times C_{\text{final}} \times V_{\text{final}} \implies V_{\text{stock}} = (1.0 \times 10^{-4}\text{ M}) \times (100 \times 10^{-9}\text{ M}) \times 0.5\text{ L}

    Correct

    Vstock=Cfinal×VfinalCstock=(1.00×10−7 M)×(0.500 L)1.00×10−4 MV_{\text{stock}} = \frac{C_{\text{final}} \times V_{\text{final}}}{C_{\text{stock}}} = \frac{(1.00 \times 10^{-7}\text{ M}) \times (0.500\text{ L})}{1.00 \times 10^{-4}\text{ M}}

    You multiplied all three variables together instead of isolating the stock volume. Starting from CstockVstock=CfinalVfinalC_{\text{stock}} V_{\text{stock}} = C_{\text{final}} V_{\text{final}}, you must divide both sides by CstockC_{\text{stock}}.

  3. Step 3

    Vstock=5.0×10−12 L=0.000005 μLV_{\text{stock}} = 5.0 \times 10^{-12}\text{ L} = 0.000005\ \mu\text{L}

    Correct

    Vstock=5.00×10−4 L=500 μLV_{\text{stock}} = 5.00 \times 10^{-4}\text{ L} = 500\ \mu\text{L}

    Your arithmetic and unit conversion correctly evaluated your formula, but the result was affected by the formula error in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the stock mass concentration to grams per liter and determined the correct stock molarity.

You accurately converted the working concentration from nanomolar to molar and the volume from milliliters to liters.

You correctly applied metric prefix conversions between liters and microliters.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted dilution formula

You wrote Vstock=Cstock×Cfinal×VfinalV_{\text{stock}} = C_{\text{stock}} \times C_{\text{final}} \times V_{\text{final}} instead of isolating Vstock=CfinalVfinalCstockV_{\text{stock}} = \frac{C_{\text{final}} V_{\text{final}}}{C_{\text{stock}}}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You multiplied all three given quantities rather than algebraically isolating the target unknown from the solute conservation equation C1V1=C2V2C_1 V_1 = C_2 V_2, producing an expression whose units do not equal volume.

REASONING PATH
Your ACEpath teacher’s suggested approach
Isolate the variable algebraically
  • C1V1=C2V2  ⟹  V1=C2V2C1C_1 V_1 = C_2 V_2 \implies V_1 = \frac{C_2 V_2}{C_1}

  • Always rearrange the dilution equation symbolically before inserting numbers to confirm which terms belong in the numerator and denominator.

Perform a dimensional unit check
  • mol/L×Lmol/L=L\frac{\text{mol/L} \times \text{L}}{\text{mol/L}} = \text{L}

  • Cancel concentration units to ensure the evaluated expression simplifies directly to a unit of volume.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the dilution relation by equating moles of solute: CstockVstock=CfinalVfinalC_{\text{stock}} V_{\text{stock}} = C_{\text{final}} V_{\text{final}}.

  2. Isolate the stock volume: Vstock=CfinalVfinalCstockV_{\text{stock}} = \frac{C_{\text{final}} V_{\text{final}}}{C_{\text{stock}}}.

  3. Substitute the calculated values: Vstock=(1.00×10−7 M)(0.500 L)1.00×10−4 M=5.00×10−4 LV_{\text{stock}} = \frac{(1.00 \times 10^{-7}\text{ M})(0.500\text{ L})}{1.00 \times 10^{-4}\text{ M}} = 5.00 \times 10^{-4}\text{ L}.

  4. Convert to microliters: 5.00×10−4 L×106 μL/L=500 μL5.00 \times 10^{-4}\text{ L} \times 10^6\ \mu\text{L/L} = 500\ \mu\text{L} (which is 0.500 mL0.500\text{ mL}).

Final answer

500 μL500\ \mu\text{L} (or 0.500 mL0.500\text{ mL})

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice isolating individual variables in C1V1=C2V2C_1 V_1 = C_2 V_2 before plugging in numerical values.

  • Verify your final units through dimensional analysis on every step.

OverviewACEpath Teacher's Diagnosis

03 The student misconverts the mass concentration unit mg/mL to g/L by dividing by 1000 instead of recognizing that 1 mg/mL equals 1 g/L.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    3.92×10−2 mg/mL=3.92×10−5 g/L3.92 \times 10^{-2}\text{ mg/mL} = 3.92 \times 10^{-5}\text{ g/L}

    Correct

    3.92×10−2 mg/mL=3.92×10−2 g/L3.92 \times 10^{-2}\text{ mg/mL} = 3.92 \times 10^{-2}\text{ g/L}

    You divided by 10001000 when converting mass concentration. Because 1 mg=10−3 g1\text{ mg} = 10^{-3}\text{ g} and 1 mL=10−3 L1\text{ mL} = 10^{-3}\text{ L}, the factors of 10−310^{-3} cancel out, meaning 1 mg/mL=1 g/L1\text{ mg/mL} = 1\text{ g/L} exactly.

  2. Step 2

    Cstock=3.92×10−5 g/L392.47 g/mol=1.0×10−7 MC_{\text{stock}} = \frac{3.92 \times 10^{-5}\text{ g/L}}{392.47\text{ g/mol}} = 1.0 \times 10^{-7}\text{ M}

    Correct

    Cstock=3.92×10−2 g/L392.47 g/mol≈1.00×10−4 MC_{\text{stock}} = \frac{3.92 \times 10^{-2}\text{ g/L}}{392.47\text{ g/mol}} \approx 1.00 \times 10^{-4}\text{ M}

    You correctly divided the mass concentration by the molar mass to find molarity, but your result was 10001000 times too dilute due to the error in Step 1.

  3. Step 3

    Vstock=(100×10−9 M×0.5 L)(1.0×10−7 M)V_{\text{stock}} = \frac{(100 \times 10^{-9}\text{ M} \times 0.5\text{ L})}{(1.0 \times 10^{-7}\text{ M})}

    Correct

    Vstock=(100×10−9 M×0.500 L)(1.00×10−4 M)V_{\text{stock}} = \frac{(100 \times 10^{-9}\text{ M} \times 0.500\text{ L})}{(1.00 \times 10^{-4}\text{ M})}

    You correctly applied the dilution formula Vstock=CfinalVfinalCstockV_{\text{stock}} = \frac{C_{\text{final}} V_{\text{final}}}{C_{\text{stock}}} with proper conversion of 100 nM100\text{ nM} and 500 mL500\text{ mL}, but substituted the incorrect CstockC_{\text{stock}}.

  4. Step 4

    Vstock=0.5 L=500000 μLV_{\text{stock}} = 0.5\text{ L} = 500000\ \mu\text{L}

    Correct

    Vstock=5.00×10−4 L=0.500 μLV_{\text{stock}} = 5.00 \times 10^{-4}\text{ L} = 0.500\ \mu\text{L}

    You accurately converted liters to microliters, but the numerical value was skewed by the earlier stock concentration error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the dilution formula CstockVstock=CfinalVfinalC_{\text{stock}} V_{\text{stock}} = C_{\text{final}} V_{\text{final}}.

You accurately converted 100 nM100\text{ nM} to 1.00×10−7 M1.00 \times 10^{-7}\text{ M} and 500 mL500\text{ mL} to 0.5 L0.5\text{ L}.

You correctly converted liters to microliters by multiplying by 10610^6.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Compound unit conversion error (mg/mL to g/L)

Dividing by 10001000 when converting mg/mL\text{mg/mL} to g/L\text{g/L} instead of recognizing that the milli- prefixes in the numerator and denominator cancel out.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating single-unit conversion (1 mg=10−3 g1\text{ mg} = 10^{-3}\text{ g}) with compound-ratio conversion (mgmL=10−3 g10−3 L=1 g/L\frac{\text{mg}}{\text{mL}} = \frac{10^{-3}\text{ g}}{10^{-3}\text{ L}} = 1\text{ g/L}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Compound Metric Prefix Cancellation
  • 1 mg1 mL=10−3 g10−3 L=1 g/L\frac{1\text{ mg}}{1\text{ mL}} = \frac{10^{-3}\text{ g}}{10^{-3}\text{ L}} = 1\text{ g/L}

  • When both numerator and denominator share the same metric prefix ('milli-'), write out both conversion factors explicitly before simplifying.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. 3.92×10−2 mg/mL=3.92×10−2 g/L3.92 \times 10^{-2}\text{ mg/mL} = 3.92 \times 10^{-2}\text{ g/L}

  2. Cstock=3.92×10−2 g/L392.47 g/mol=1.00×10−4 M=100 μMC_{\text{stock}} = \frac{3.92 \times 10^{-2}\text{ g/L}}{392.47\text{ g/mol}} = 1.00 \times 10^{-4}\text{ M} = 100\ \mu\text{M}

  3. Vstock=1.00×10−7 M×0.500 L1.00×10−4 M=5.00×10−4 LV_{\text{stock}} = \frac{1.00 \times 10^{-7}\text{ M} \times 0.500\text{ L}}{1.00 \times 10^{-4}\text{ M}} = 5.00 \times 10^{-4}\text{ L}

  4. Vstock=5.00×10−4 L×106 μL/L=0.500 μLV_{\text{stock}} = 5.00 \times 10^{-4}\text{ L} \times 10^6\ \mu\text{L/L} = 0.500\ \mu\text{L}

Final answer

0.500 μL0.500\ \mu\text{L}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out both the numerator and denominator unit factors explicitly when converting composite units like mg/mL\text{mg/mL}.

  • Check laboratory feasibility: adding 0.5 L0.5\text{ L} (500 mL500\text{ mL}) of stock to make a 500 mL500\text{ mL} working solution would mean the solution is 100%100\% stock, which signals an error for a nanomolar working solution.

Lock it in

Similar question

01

A cell culture protocol requires a working concentration of 50 nM50\text{ nM} of a growth factor in 200 mL200\text{ mL} of medium. If the stock solution is 25 μM25\ \mu\text{M}, what volume of stock (in μL\mu\text{L}) is needed?

Answer

400 μL400\ \mu\text{L}. Convert 50 nM=0.050 μM50\text{ nM} = 0.050\ \mu\text{M}. Using C1V1=C2V2C_1 V_1 = C_2 V_2: V1=0.050 μM×200 mL25 μM=0.400 mL=400 μLV_1 = \frac{0.050\ \mu\text{M} \times 200\text{ mL}}{25\ \mu\text{M}} = 0.400\text{ mL} = 400\ \mu\text{L}.

02

An inhibitor with molar mass 500 g/mol500\text{ g/mol} is supplied as a stock solution of 1.00 mg/mL1.00\text{ mg/mL}. You need to prepare 1.00 L1.00\text{ L} of differentiation medium at a concentration of 200 nM200\text{ nM}. What volume of stock (in μL\mu\text{L}) must be added?

Answer

100 μL100\ \mu\text{L}. Stock molarity is Cstock=1.00 g/L500 g/mol=2.00×10−3 M=2,000 μMC_{\text{stock}} = \frac{1.00\text{ g/L}}{500\text{ g/mol}} = 2.00 \times 10^{-3}\text{ M} = 2{,}000\ \mu\text{M}. Working concentration is 200 nM=0.200 μM200\text{ nM} = 0.200\ \mu\text{M}. Applying Vstock=0.200 μM×1,000 mL2,000 μM=0.100 mL=100 μLV_{\text{stock}} = \frac{0.200\ \mu\text{M} \times 1{,}000\text{ mL}}{2{,}000\ \mu\text{M}} = 0.100\text{ mL} = 100\ \mu\text{L}.

03

An investigator dilutes 2.5 μL2.5\ \mu\text{L} of a 10 mM10\text{ mM} dexamethasone stock into culture medium to reach a final concentration of 100 nM100\text{ nM}. What is the total volume of medium prepared, and what mass of dexamethasone (M=392.47 g/molM = 392.47\text{ g/mol}) does this total volume contain?

Answer

Final volume: 250 mL250\text{ mL}; dexamethasone mass: 9.81 μg9.81\ \mu\text{g}. Step 1: V2=C1V1C2=10 mM×2.5 μL0.0001 mM=250,000 μL=250 mL=0.250 LV_2 = \frac{C_1 V_1}{C_2} = \frac{10\text{ mM} \times 2.5\ \mu\text{L}}{0.0001\text{ mM}} = 250{,}000\ \mu\text{L} = 250\text{ mL} = 0.250\text{ L}. Step 2: Total moles n=100×10−9 mol/L×0.250 L=2.50×10−8 moln = 100 \times 10^{-9}\text{ mol/L} \times 0.250\text{ L} = 2.50 \times 10^{-8}\text{ mol}. Step 3: Mass m=(2.50×10−8 mol)×392.47 g/mol≈9.81×10−6 g=9.81 μgm = (2.50 \times 10^{-8}\text{ mol}) \times 392.47\text{ g/mol} \approx 9.81 \times 10^{-6}\text{ g} = 9.81\ \mu\text{g}.

Loading workspace…