Resources

A bacteriophage initiates a lytic cycle in an Escherichia coli suspension. Each infected bacterium has an average burst size of 120120 virions, and the latent period is 30 minutes30\text{ minutes}. Assuming an initial synchronous infection where exactly 2.5×1032.5 \times 10^3 host cells are each infected by a single virion at time t=0t = 0, calculate the total number of newly released free virions produced after two complete, synchronous cycles of replication (at t=60 minutest = 60\text{ minutes}), assuming every released phage infects an uninfected bacterial cell in excess.

Answer and steps

Final answer

3.60×107 virions3.60 \times 10^7\text{ virions}

Steps

01

Determine the Number of Phages Released in Cycle 1 (t=30 minutest = 30\text{ minutes})

Understanding the Viral Lytic Replication Cycle

Bacteriophages are obligate intracellular parasites that rely completely on the host cell's metabolic machinery to replicate. In a lytic cycle:

  1. Attachment and Entry: A phage infects a host bacterium.
  2. Biosynthesis and Assembly: The viral genome directs the host to synthesize viral proteins and nucleic acids, assembling new virions inside the cell during the latent period.
  3. Lysis and Release: The bacterial host cell lyses (breaks open), releasing a burst of mature phages into the surrounding medium. The number of new phages released per infected host is called the burst size (BB).

At t=0t = 0, N0=2.5×103N_0 = 2.5 \times 10^3 host cells are infected.

After one latent period of 30 minutes30\text{ minutes}, all initially infected cells lyse simultaneously. With an average burst size of B=120B = 120:

V1=N0⋅BV_1 = N_0 \cdot B

V1=(2.5×103 cells)⋅(120 virions/cell)=3.0×105 virionsV_1 = (2.5 \times 10^3\text{ cells}) \cdot (120\text{ virions/cell}) = 3.0 \times 10^5\text{ virions}


02

Determine the Number of Phages Released in Cycle 2 (t=60 minutest = 60\text{ minutes})

Because bacterial hosts are present in excess, each of the 3.0×1053.0 \times 10^5 newly released virions immediately and synchronously infects a new, uninfected bacterial cell:

N1=3.0×105 infected cellsN_1 = 3.0 \times 10^5\text{ infected cells}

These cells undergo the second 30-minute lytic cycle. At t=60 minutest = 60\text{ minutes}, this second cohort of infected bacteria lyses, each releasing an average of 120120 virions:

V2=N1⋅BV_2 = N_1 \cdot B

V2=(3.0×105 cells)⋅(120 virions/cell)=3.60×107 virionsV_2 = (3.0 \times 10^5\text{ cells}) \cdot (120\text{ virions/cell}) = 3.60 \times 10^7\text{ virions}


General Geometric Formula

For nn synchronous rounds of lytic replication, the number of virions produced in generation nn is given by:

Vn=N0⋅BnV_n = N_0 \cdot B^n

Substituting N0=2.5×103N_0 = 2.5 \times 10^3, B=120B = 120, and n=2n = 2:

V2=(2.5×103)⋅(120)2=(2.5×103)⋅14,400=3.60×107 virionsV_2 = (2.5 \times 10^3) \cdot (120)^2 = (2.5 \times 10^3) \cdot 14{,}400 = 3.60 \times 10^7\text{ virions}

Common Pitfall: Do not confuse viral replication with binary fission. Bacteria reproduce by dividing into two (2n2^n), whereas viruses reproduce by intracellular burst, multiplying by a factor equal to the burst size (BnB^n) in each cycle.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student treats the two replication cycles additively by multiplying the single-cycle yield by 2 instead of compounding exponentially.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Virions from cycle 1=2.5×103×120=3.0×105\text{Virions from cycle 1} = 2.5 \times 10^3 \times 120 = 3.0 \times 10^5

  2. Step 2

    Virions after 2 cycles=3.0×105×2=6.0×105\text{Virions after 2 cycles} = 3.0 \times 10^5 \times 2 = 6.0 \times 10^5

    Correct

    V2=V1⋅B=(3.0×105)⋅120=3.60×107 virionsV_2 = V_1 \cdot B = (3.0 \times 10^5) \cdot 120 = 3.60 \times 10^7\text{ virions}

    You multiplied the cycle 1 yield by 22 rather than multiplying by the burst size (120120). Because each of the 3.0×1053.0 \times 10^5 released phages infects a new bacterium and each newly infected bacterium bursts to release 120120 more phages, the yield compounds multiplicatively as V2=V1×120V_2 = V_1 \times 120.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the initial cell count must be multiplied by the burst size to find the first-generation phage yield.

You performed the scientific notation multiplication accurately in the first step.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Linear scaling instead of geometric multiplication

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated consecutive viral replication cycles as an additive or linear process (doubling for two cycles) rather than an exponential geometric cascade where each newly released virion initiates a new burst of 120 virions.

REASONING PATH
Your ACEpath teacher’s suggested approach
Compound Burst Rule
  • In synchronous lytic replication with excess host cells, each generation's virion count is multiplied by the burst size: Vn=N0⋅BnV_n = N_0 \cdot B^n.

  • For each additional complete lytic cycle, multiply the preceding virion count by the burst size (BB), never by the cycle number (nn).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Each of the 3.0×1053.0 \times 10^5 newly released phages infects a new host bacterium, giving N1=3.0×105 infected cellsN_1 = 3.0 \times 10^5\text{ infected cells}.

  2. Each infected cell undergoes lysis at t=60 minutest = 60\text{ minutes} with a burst size of B=120B = 120.

  3. Calculate total virions released in cycle 2: V2=(3.0×105)×120=3.60×107 virionsV_2 = (3.0 \times 10^5) \times 120 = 3.60 \times 10^7\text{ virions}.

Final answer

3.60×107 virions3.60 \times 10^7\text{ virions}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the exponential nature of viral replication cycles where each virion infects a new host cell.

  • Practice setting up multi-generation viral burst problems using the formula Vn=N0⋅BnV_n = N_0 \cdot B^n.

OverviewACEpath Teacher's Diagnosis

02 The student calculates only the first cycle yield, confusing the virions produced after one cycle (30 minutes) with the yield after two full cycles (60 minutes).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Number of infected bacteria=2.5×103\text{Number of infected bacteria} = 2.5 \times 10^3, Burst size=120  ⟹  2.5×103×120=3.0×105\text{Burst size} = 120 \implies 2.5 \times 10^3 \times 120 = 3.0 \times 10^5

  2. Step 2

    Total virions=3.0×105\text{Total virions} = 3.0 \times 10^5

    Correct

    V2=V1⋅B=(3.0×105)⋅120=3.60×107 virionsV_2 = V_1 \cdot B = (3.0 \times 10^5) \cdot 120 = 3.60 \times 10^7\text{ virions}

    You treated the output of cycle 1 as the final total, but the question asks for the virions produced after two complete synchronous cycles (t=60 minutest = 60\text{ minutes}). Each of the 3.0×1053.0 \times 10^5 phages infects a new host cell, producing another burst of 120120 virions per cell.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly extracted the initial infected population size (N0=2.5×103N_0 = 2.5 \times 10^3) and the burst size (B=120B = 120).

You accurately computed the virion yield from the first round of lysis at t=30 minutest = 30\text{ minutes}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Cycle Count Omission

You stopped calculating after the first 30-minute cycle instead of completing both cycles required for the full 60 minutes.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing single-step viral burst output with multi-generation exponential yield across multiple lytic cycles.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Total Time vs. Latent Period
  • Number of cycles n=Total elapsed timeLatent periodn = \frac{\text{Total elapsed time}}{\text{Latent period}}.

  • Divide 60 minutes60\text{ minutes} by 30 minutes/cycle30\text{ minutes/cycle} to establish that two synchronous replication cycles occur.

Apply Multi-Cycle Geometric Expansion
  • For nn synchronous cycles with uninfected hosts in excess, virion yield is Vn=N0⋅BnV_n = N_0 \cdot B^n.

  • Multiply the cycle 1 output by the burst size again, or calculate (2.5×103)⋅(120)2(2.5 \times 10^3) \cdot (120)^2 directly.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Each newly released phage infects one uninfected bacterial host cell in excess, yielding N1=3.0×105 newly infected cellsN_1 = 3.0 \times 10^5\text{ newly infected cells}.

  2. During the second 30-minute latent period (t=30 mint = 30\text{ min} to t=60 mint = 60\text{ min}), these cells undergo synchronous lysis.

  3. Multiply the second cohort by the burst size: V2=(3.0×105)⋅120=3.60×107V_2 = (3.0 \times 10^5) \cdot 120 = 3.60 \times 10^7.

Final answer

3.60×107 virions3.60 \times 10^7\text{ virions}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always calculate the number of cycles (n=total time/latent periodn = \text{total time} / \text{latent period}) before performing burst-size calculations.

  • Use the general formula Vn=N0⋅BnV_n = N_0 \cdot B^n when host cells are provided in excess.

  • Double-check that your final answer corresponds to the requested time point (t=60 mint = 60\text{ min}) rather than t=30 mint = 30\text{ min}.

OverviewACEpath Teacher's Diagnosis

03 The student misinterprets burst size as doubling binary fission (2²) rather than the given phage burst size of 120 virions per infected bacterium.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    2 cycles of replication means \text{ cycles of replication means } 2^2 = 4 fold increase\text{ fold increase}

    Correct

    Each cycle multiplies the population by the burst size \text{Each cycle multiplies the population by the burst size } B = 120, so \text{ so } 2 cycles yield \text{ cycles yield } B^2 = 120^2 = 14{,}400

    You assumed the phage population doubles each cycle like bacteria undergoing binary fission. Because a phage produces an entire burst of 120120 virions inside a single host cell before lysis, the population scales by a factor of Bn=1202B^n = 120^2 across two synchronous cycles.

  2. Step 2

    Total virions\text{Total virions} = 2.5 ×\times 10^3 ×\times 4 = 1.0 ×\times 10^4

    Correct

    V_2 = 2.5 ×\times 10^3 ×\times 120^2 = 3.60 ×\times 10^7

    Your multiplication was mechanically correct based on your factor of 44, but substituting the correct burst factor of 14,40014{,}400 gives 3.60×107 virions3.60 \times 10^7\text{ virions}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that two synchronous cycles require raising the single-cycle growth factor to the power of 22.

You accurately carried out the scientific-notation multiplication using your chosen growth factor.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing viral burst size with binary fission

You substituted a base of 22 instead of the given burst size of 120120.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Viruses do not divide by binary fission; they replicate inside host cells and are released in large numbers during lysis. For nn synchronous lytic cycles with burst size BB, the virion count multiplies by BnB^n, not 2n2^n.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify the replication mechanism
  • Viruses replicate by intracellular assembly and burst (BB virions per host cell), whereas cellular organisms divide by binary fission (22 daughter cells per parent).

  • Check whether the organism is a virus or a cellular microbe before choosing the multiplication base.

Apply the multi-cycle burst formula
  • For nn synchronous lytic cycles starting from N0N_0 infected host cells, the total virions produced is Vn=N0⋅BnV_n = N_0 \cdot B^n.

  • Substitute the given burst size BB into the base of the exponential term.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Determine the single-cycle multiplication factor from the burst size: B=120B = 120.

  2. Calculate the two-cycle factor: B2=1202=14,400B^2 = 120^2 = 14{,}400.

  3. Multiply the initial number of infected cells by this factor: V2=(2.5×103)×14,400=3.60×107 virionsV_2 = (2.5 \times 10^3) \times 14{,}400 = 3.60 \times 10^7\text{ virions}.

Final answer

3.60×107 virions3.60 \times 10^7\text{ virions}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinct stages of the viral lytic cycle, specifically how burst size differs from binary fission.

  • Practice calculating phage yield over multiple synchronous rounds using the formula Vn=N0⋅BnV_n = N_0 \cdot B^n.

Lock it in

Similar question

01

A sample contains 4.0×1024.0 \times 10^2 bacterial cells, each infected by a single bacteriophage with a burst size of 8080 virions and a latent period of 20 minutes20\text{ minutes}. Assuming excess uninfected host bacteria, calculate the total number of free virions produced at t=40 minutest = 40\text{ minutes} (after two complete cycles).

Answer

2.56×106 virions2.56 \times 10^6\text{ virions}. Key steps: Cycle 1 yield V1=(4.0×102)×80=3.2×104V_1 = (4.0 \times 10^2) \times 80 = 3.2 \times 10^4. Cycle 2 yield V2=(3.2×104)×80=2.56×106 virionsV_2 = (3.2 \times 10^4) \times 80 = 2.56 \times 10^6\text{ virions} (or V2=4.0×102×802V_2 = 4.0 \times 10^2 \times 80^2).

02

A culture has 1.5×1031.5 \times 10^3 host bacteria initially infected by a phage with an average burst size of 200200. If all released phages synchronously infect new cells in excess, what is the ratio of virions released at the end of cycle 3 compared to cycle 1?

Answer

4.0×1044.0 \times 10^4 (or 40,000:140{,}000 : 1). Key steps: V1=N0⋅BV_1 = N_0 \cdot B and V3=N0⋅B3V_3 = N_0 \cdot B^3. The ratio V3V1=N0⋅B3N0⋅B=B2=2002=40,000\frac{V_3}{V_1} = \frac{N_0 \cdot B^3}{N_0 \cdot B} = B^2 = 200^2 = 40{,}000.

03

In a phage infection experiment with burst size B=50B = 50, 1.0×1041.0 \times 10^4 virions are produced in the first cycle. However, in the second cycle, only 60%60\% of the released virions successfully infect a new host cell before lysis occurs. How many virions are released at the end of the second cycle?

Answer

3.0×105 virions3.0 \times 10^5\text{ virions}. Key steps: Number of cells infected in cycle 2 is N1=0.60×1.0×104=6.0×103N_1 = 0.60 \times 1.0 \times 10^4 = 6.0 \times 10^3. Second cycle burst yield is V2=N1×B=(6.0×103)×50=3.0×105 virionsV_2 = N_1 \times B = (6.0 \times 10^3) \times 50 = 3.0 \times 10^5\text{ virions}.

Loading workspace…