Resources

A researcher measures the activity of an alkaline phosphatase at its optimal pH 9.8\text{pH } 9.8 and 37∘C37^\circ\text{C}. In an assay mixture containing a substrate concentration [S]=0.600 mM[S] = 0.600\text{ mM}, the initial rate of product formation is v0=24.0 μmol/(min⋅mg enzyme)v_0 = 24.0\text{ }\mu\text{mol}/(\text{min}\cdot\text{mg enzyme}). Given that the maximum velocity of this enzyme preparation is Vmax⁡=40.0 μmol/(min⋅mg enzyme)V_{\max} = 40.0\text{ }\mu\text{mol}/(\text{min}\cdot\text{mg enzyme}), calculate the Michaelis constant KmK_m (in mM\text{mM}) of the enzyme for this substrate.

Answer and steps

Final answer

Km=0.400 mMK_m = 0.400\text{ mM}

Steps

Understanding the Relationship

The relationship between the initial reaction velocity (v0v_0) of an enzyme-catalyzed reaction and the substrate concentration ([S][S]) is described by the Michaelis-Menten equation:

v0=Vmax⁡[S]Km+[S]v_0 = \frac{V_{\max} [S]}{K_m + [S]}

Where:

  • v0v_0 is the initial reaction rate (24.0 μmol/(min⋅mg enzyme)24.0\text{ }\mu\text{mol}/(\text{min}\cdot\text{mg enzyme}))
  • Vmax⁡V_{\max} is the maximum reaction rate (40.0 μmol/(min⋅mg enzyme)40.0\text{ }\mu\text{mol}/(\text{min}\cdot\text{mg enzyme}))
  • [S][S] is the substrate concentration (0.600 mM0.600\text{ mM})
  • KmK_m is the Michaelis constant (in mM\text{mM})

Step-by-Step Derivation

  1. Substitute the given values into the Michaelis-Menten equation:

    24.0=40.0⋅0.600Km+0.60024.0 = \frac{40.0 \cdot 0.600}{K_m + 0.600}

  2. Simplify the numerator on the right-hand side:

    40.0⋅0.600=24.040.0 \cdot 0.600 = 24.0

    The equation becomes:

    24.0=24.0Km+0.60024.0 = \frac{24.0}{K_m + 0.600}

  3. Solve for (Km+0.600)(K_m + 0.600):

    Divide both sides by 24.024.0:

    1=1Km+0.6001 = \frac{1}{K_m + 0.600}

    Km+0.600=1.000K_m + 0.600 = 1.000

  4. Calculate KmK_m:

    Km=1.000−0.600=0.400 mMK_m = 1.000 - 0.600 = 0.400\text{ mM}


Key Note & Common Pitfall

  • Unit Consistency: Ensure that v0v_0 and Vmax⁡V_{\max} share the same velocity units, and that [S][S] and KmK_m share the same concentration units. Here, both velocities are in μmol/(min⋅mg enzyme)\mu\text{mol}/(\text{min}\cdot\text{mg enzyme}), and both [S][S] and KmK_m are expressed in mM\text{mM}.
  • Conceptual Meaning of KmK_m: KmK_m represents the substrate concentration at which the reaction velocity is half of its maximum (v0=12Vmax⁡=20.0 μmol/(min⋅mg enzyme)v_0 = \frac{1}{2}V_{\max} = 20.0\text{ }\mu\text{mol}/(\text{min}\cdot\text{mg enzyme})). Since the measured v0=24.0v_0 = 24.0 is slightly greater than 12Vmax⁡\frac{1}{2}V_{\max}, [S]=0.600 mM[S] = 0.600\text{ mM} must be greater than KmK_m. The result Km=0.400 mMK_m = 0.400\text{ mM} logically aligns with this expectation.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the Michaelis-Menten rate equation with a direct linear proportionality, setting v₀ = V_max * ([S] / K_m) and calculating K_m = 1.00 mM.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v0=Vmax⁡∗[S]Km  ⟹  24.0=40.0∗0.600Kmv_0 = V_{\max} * \frac{[S]}{K_m} \implies 24.0 = 40.0 * \frac{0.600}{K_m}

    Correct

    v0=Vmax⁡[S]Km+[S]  ⟹  24.0=40.0⋅0.600Km+0.600v_0 = \frac{V_{\max} [S]}{K_m + [S]} \implies 24.0 = \frac{40.0 \cdot 0.600}{K_m + 0.600}

    You omitted the substrate concentration term [S][S] from the denominator. The Michaelis-Menten equation describes saturable hyperbolic kinetics where the denominator is Km+[S]K_m + [S], not KmK_m alone.

  2. Step 2

    Km=24.024.0K_m = \frac{24.0}{24.0}

    Correct

    Km+0.600=24.024.0=1.000K_m + 0.600 = \frac{24.0}{24.0} = 1.000

    Your algebraic rearrangement followed correctly from your formula setup, but the missing term in the denominator propagated into this step.

  3. Step 3

    Km=1.00 mMK_m = 1.00\text{ mM}

    Correct

    Km=1.000−0.600=0.400 mMK_m = 1.000 - 0.600 = 0.400\text{ mM}

    Your final calculated value is incorrect due to the initial formula mistake.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the given values for v0v_0, Vmax⁡V_{\max}, and [S][S] with their respective units.

You carried out the algebraic solving steps accurately based on your written equation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted Substrate from Denominator

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the reaction rate as purely linear with respect to [S]/Km[S]/K_m rather than using the full hyperbolic Michaelis-Menten relationship v0=Vmax⁡[S]Km+[S]v_0 = \frac{V_{\max}[S]}{K_m + [S]}, which accounts for enzyme saturation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Michaelis-Menten Formula
  • Enzyme initial velocity follows v0=Vmax⁡[S]Km+[S]v_0 = \frac{V_{\max}[S]}{K_m + [S]}.

  • Always verify that the denominator contains the sum Km+[S]K_m + [S] before substituting known values.

Sanity Check via Definition of $K_m$
  • When [S]=Km[S] = K_m, v0=12Vmax⁡v_0 = \frac{1}{2}V_{\max}. If v0>12Vmax⁡v_0 > \frac{1}{2}V_{\max}, then [S][S] must be greater than KmK_m.

  • Compare v0v_0 to 12Vmax⁡\frac{1}{2}V_{\max}: here 24.0>20.024.0 > 20.0, meaning [S]=0.600 mM[S] = 0.600\text{ mM} must exceed KmK_m, so Km<0.600 mMK_m < 0.600\text{ mM}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write down the standard Michaelis-Menten equation: v0=Vmax⁡[S]Km+[S]v_0 = \frac{V_{\max}[S]}{K_m + [S]}.

  2. Substitute the known values: 24.0=40.0⋅0.600Km+0.60024.0 = \frac{40.0 \cdot 0.600}{K_m + 0.600}.

  3. Simplify the numerator: 24.0=24.0Km+0.60024.0 = \frac{24.0}{K_m + 0.600}.

  4. Divide both sides by 24.024.0: 1=1Km+0.600  ⟹  Km+0.600=1.0001 = \frac{1}{K_m + 0.600} \implies K_m + 0.600 = 1.000.

  5. Subtract 0.6000.600 from both sides to find KmK_m.

Final answer

Km=0.400 mMK_m = 0.400\text{ mM}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the derivation of the Michaelis-Menten equation to understand why the denominator is Km+[S]K_m + [S].

  • Practice checking whether your calculated KmK_m makes biological sense by comparing v0v_0 to 12Vmax⁡\frac{1}{2}V_{\max}.

OverviewACEpath Teacher's Diagnosis

02 The student inverts the velocity ratio when rearranging the Michaelis-Menten equation, writing K_m = [S] * (v₀ / V_max - 1) and obtaining a negative value or dropping the sign to get 0.240 mM.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Km=[S]⋅(1−v0Vmax⁡)K_m = [S] \cdot \left(1 - \frac{v_0}{V_{\max}}\right)

    Correct

    Km=[S]⋅(Vmax⁡v0−1)K_m = [S] \cdot \left(\frac{V_{\max}}{v_0} - 1\right)

    When solving v0=Vmax⁡[S]Km+[S]v_0 = \frac{V_{\max}[S]}{K_m + [S]} for KmK_m, dividing both sides by v0v_0 and multiplying by (Km+[S])(K_m + [S]) gives Km+[S]=Vmax⁡[S]v0K_m + [S] = \frac{V_{\max}[S]}{v_0}. Dividing by [S][S] gives Km[S]+1=Vmax⁡v0\frac{K_m}{[S]} + 1 = \frac{V_{\max}}{v_0}, which rearranges to Km=[S](Vmax⁡v0−1)K_m = [S]\left(\frac{V_{\max}}{v_0} - 1\right) rather than [S](1−v0Vmax⁡)[S]\left(1 - \frac{v_0}{V_{\max}}\right).

  2. Step 2

    Km=0.600⋅(1−24.040.0)  ⟹  Km=0.600⋅(1−0.60)  ⟹  Km=0.600⋅0.40K_m = 0.600 \cdot \left(1 - \frac{24.0}{40.0}\right) \implies K_m = 0.600 \cdot (1 - 0.60) \implies K_m = 0.600 \cdot 0.40

    Correct

    Km=0.600⋅(40.024.0−1)=0.600⋅(53−1)=0.600⋅23K_m = 0.600 \cdot \left(\frac{40.0}{24.0} - 1\right) = 0.600 \cdot \left(\frac{5}{3} - 1\right) = 0.600 \cdot \frac{2}{3}

    Your arithmetic evaluation of your written expression was clean and accurate, but it was affected by the inverted formula from Step 1.

  3. Step 3

    Km=0.240 mMK_m = 0.240\text{ mM}

    Correct

    Km=0.400 mMK_m = 0.400\text{ mM}

    Because of the rearranged formula error in Step 1, the calculated value of KmK_m is incorrect.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly extracted all the required parameters ([S][S], v0v_0, and Vmax⁡V_{\max}) with their matching units.

You performed all arithmetic and decimal multiplications accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted velocity ratio in Michaelis-Menten rearrangement

You inverted the velocity fraction to v0Vmax⁡\frac{v_0}{V_{\max}} and subtracted it from 11, instead of taking Vmax⁡v0−1\frac{V_{\max}}{v_0} - 1.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Memorizing or rushing an algebraic shortcut for KmK_m instead of systematically cross-multiplying the fundamental Michaelis-Menten relation v0(Km+[S])=Vmax⁡[S]v_0(K_m + [S]) = V_{\max}[S].

REASONING PATH
Your ACEpath teacher’s suggested approach
Conceptual sanity check with half-maximal velocity
  • When v0>0.5 Vmax⁡v_0 > 0.5\,V_{\max}, the substrate concentration [S][S] must be greater than KmK_m. Conversely, when v0<0.5 Vmax⁡v_0 < 0.5\,V_{\max}, [S]<Km[S] < K_m.

  • Notice here that 0.5 Vmax⁡=20.0 μmol/(min⋅mg)0.5\,V_{\max} = 20.0\text{ }\mu\text{mol}/(\text{min}\cdot\text{mg}). Since the observed v0=24.0v_0 = 24.0 is greater than half-maximal, the required KmK_m must be less than [S]=0.600 mM[S] = 0.600\text{ mM}. Although 0.240 mM0.240\text{ mM} satisfies this inequality, always verify by plugging the candidate KmK_m back into v0=Vmax⁡[S]Km+[S]v_0 = \frac{V_{\max}[S]}{K_m + [S]} to confirm it produces 24.024.0.

Cross-multiplication over memorized rearrangement
  • Start directly from the base equation v0=Vmax⁡[S]Km+[S]v_0 = \frac{V_{\max}[S]}{K_m + [S]} and substitute values before isolating the unknown.

  • Write 24.0(Km+0.600)=40.0(0.600)24.0(K_m + 0.600) = 40.0(0.600), expand or divide first to get Km+0.600=1.000K_m + 0.600 = 1.000, and then subtract 0.6000.600 to obtain Km=0.400 mMK_m = 0.400\text{ mM}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute known values directly into the base Michaelis-Menten equation: 24.0=40.0⋅0.600Km+0.60024.0 = \frac{40.0 \cdot 0.600}{K_m + 0.600}.

  2. Multiply both sides by (Km+0.600)(K_m + 0.600): 24.0(Km+0.600)=24.024.0(K_m + 0.600) = 24.0.

  3. Divide both sides by 24.024.0: Km+0.600=1.000K_m + 0.600 = 1.000.

  4. Subtract 0.6000.600 from both sides: Km=1.000−0.600=0.400 mMK_m = 1.000 - 0.600 = 0.400\text{ mM}.

Final answer

Km=0.400 mMK_m = 0.400\text{ mM}

NEXT STEPS
Final Takeaways from Your Teacher
  • Avoid using memorized pre-rearranged formulas for KmK_m; substitute numerical values into v0=Vmax⁡[S]Km+[S]v_0 = \frac{V_{\max}[S]}{K_m + [S]} first.

  • Practice isolating KmK_m symbolically by inverting both sides: 1v0=KmVmax⁡[S]+1Vmax⁡\frac{1}{v_0} = \frac{K_m}{V_{\max}[S]} + \frac{1}{V_{\max}}, which cleanly leads to Km=[S](Vmax⁡v0−1)K_m = [S]\left(\frac{V_{\max}}{v_0} - 1\right).

OverviewACEpath Teacher's Diagnosis

03 The student misremembers the Michaelis-Menten equation as v₀ = (V_max * K_m) / (K_m + [S]), swapping the roles of K_m and [S] in the numerator to calculate K_m = 0.900 mM.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v0=Vmax⁡⋅KmKm+[S]  ⟹  24.0⋅(Km+0.600)=40.0⋅Kmv_0 = \frac{V_{\max} \cdot K_m}{K_m + [S]} \implies 24.0 \cdot (K_m + 0.600) = 40.0 \cdot K_m

    Correct

    v0=Vmax⁡[S]Km+[S]  ⟹  24.0=40.0⋅0.600Km+0.600v_0 = \frac{V_{\max}[S]}{K_m + [S]} \implies 24.0 = \frac{40.0 \cdot 0.600}{K_m + 0.600}

    You swapped the roles of KmK_m and [S][S] in the numerator. Reaction rate depends directly on substrate availability, so the numerator must contain [S][S] multiplied by Vmax⁡V_{\max}.

  2. Step 2

    24.0⋅Km+14.4=40.0⋅Km  ⟹  16.0⋅Km=14.424.0 \cdot K_m + 14.4 = 40.0 \cdot K_m \implies 16.0 \cdot K_m = 14.4

    Correct

    24.0⋅(Km+0.600)=24.0  ⟹  Km+0.600=1.00024.0 \cdot (K_m + 0.600) = 24.0 \implies K_m + 0.600 = 1.000

    Your algebraic expansion and rearrangement were executed correctly based on your initial formula, but the terms carried over the incorrect starting equation.

  3. Step 3

    Km=0.900 mMK_m = 0.900\text{ mM}

    Correct

    Km=0.400 mMK_m = 0.400\text{ mM}

    Your final value followed consistently from your earlier equation, but because of the formula swap, the calculated Michaelis constant is incorrect.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly substituted the numerical values for initial velocity, maximum velocity, and substrate concentration.

You carried out the multi-step algebraic rearrangement and division accurately without any arithmetic slips.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula Recall Error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the placement of KmK_m and [S][S] in the Michaelis-Menten rate law, recalling Vmax⁡KmV_{\max} K_m rather than Vmax⁡[S]V_{\max}[S] in the numerator.

REASONING PATH
Your ACEpath teacher’s suggested approach
Verify Boundary Behavior at Saturating Substrate
  • As [S]→∞[S] \to \infty, velocity v0v_0 must approach Vmax⁡V_{\max}. In the formula v0=Vmax⁡[S]Km+[S]v_0 = \frac{V_{\max}[S]}{K_m + [S]}, dividing top and bottom by [S][S] yields Vmax⁡Km[S]+1→Vmax⁡\frac{V_{\max}}{\frac{K_m}{[S]} + 1} \to V_{\max}.

  • Whenever writing the equation, test whether setting a huge [S][S] eliminates the denominator and leaves v0≈Vmax⁡v_0 \approx V_{\max}.

Reason with the Half-Maximal Rule
  • When v0=12Vmax⁡=20.0 μmol/(min⋅mg enzyme)v_0 = \frac{1}{2}V_{\max} = 20.0\text{ }\mu\text{mol}/(\text{min}\cdot\text{mg enzyme}), [S][S] equals KmK_m. Because your measured v0=24.0v_0 = 24.0 is greater than 12Vmax⁡\frac{1}{2}V_{\max}, [S][S] must be greater than KmK_m.

  • Check your final KmK_m against [S][S]: since v0>12Vmax⁡v_0 > \frac{1}{2}V_{\max}, your calculated KmK_m should be less than 0.600 mM0.600\text{ mM}, signaling that 0.900 mM0.900\text{ mM} is unphysical.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the standard Michaelis-Menten equation: v0=Vmax⁡[S]Km+[S]v_0 = \frac{V_{\max}[S]}{K_m + [S]}

  2. Substitute the given values: 24.0=40.0⋅0.600Km+0.60024.0 = \frac{40.0 \cdot 0.600}{K_m + 0.600}

  3. Simplify the numerator: 40.0⋅0.600=24.040.0 \cdot 0.600 = 24.0, so 24.0=24.0Km+0.60024.0 = \frac{24.0}{K_m + 0.600}

  4. Divide both sides by 24.024.0: Km+0.600=1.000K_m + 0.600 = 1.000

  5. Subtract 0.6000.600 from both sides: Km=0.400 mMK_m = 0.400\text{ mM}

Final answer

Km=0.400 mMK_m = 0.400\text{ mM}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the derivation of the Michaelis-Menten equation to see why the numerator reflects enzyme-substrate complex formation proportional to [S][S].

  • Practice testing limiting cases ([S]=0[S] = 0, [S]=Km[S] = K_m, and [S]≫Km[S] \gg K_m) to confirm your formula before solving.

Lock it in

Similar question

01

An enzyme has a maximum velocity Vmax⁡=60 μmol/(min⋅mg)V_{\max} = 60\text{ }\mu\text{mol}/(\text{min}\cdot\text{mg}) and a Michaelis constant Km=1.5 mMK_m = 1.5\text{ mM}. Calculate the initial rate v0v_0 when [S]=1.5 mM[S] = 1.5\text{ mM}.

Answer

v0=30 μmol/(min⋅mg)v_0 = 30\text{ }\mu\text{mol}/(\text{min}\cdot\text{mg}). When [S]=Km[S] = K_m, v0=12Vmax⁡=602=30 μmol/(min⋅mg)v_0 = \frac{1}{2}V_{\max} = \frac{60}{2} = 30\text{ }\mu\text{mol}/(\text{min}\cdot\text{mg}).

02

For a catalyzed reaction, Vmax⁡=100 nM/sV_{\max} = 100\text{ nM/s}. When [S]=3.0 μM[S] = 3.0\text{ }\mu\text{M}, the initial velocity is measured at v0=75 nM/sv_0 = 75\text{ nM/s}. Determine KmK_m.

Answer

Km=1.0 μMK_m = 1.0\text{ }\mu\text{M}. Using v0=Vmax⁡[S]Km+[S]v_0 = \frac{V_{\max}[S]}{K_m + [S]}, 75=100⋅3.0Km+3.0  ⟹  75(Km+3.0)=300  ⟹  Km+3.0=4.0  ⟹  Km=1.0 μM75 = \frac{100 \cdot 3.0}{K_m + 3.0} \implies 75(K_m + 3.0) = 300 \implies K_m + 3.0 = 4.0 \implies K_m = 1.0\text{ }\mu\text{M}.

03

An uncharacterized mutant enzyme exhibits v0=18 μM/minv_0 = 18\text{ }\mu\text{M/min} at [S]=2.0 mM[S] = 2.0\text{ mM} and v0=30 μM/minv_0 = 30\text{ }\mu\text{M/min} at [S]=6.0 mM[S] = 6.0\text{ mM}. Assuming standard Michaelis-Menten kinetics, calculate both Vmax⁡V_{\max} and KmK_m.

Answer

Vmax⁡=45 μM/minV_{\max} = 45\text{ }\mu\text{M/min} and Km=3.0 mMK_m = 3.0\text{ mM}. Taking the ratio of the two conditions: v1v2=1830=35=2/(Km+2)6/(Km+6)=Km+63(Km+2)\frac{v_1}{v_2} = \frac{18}{30} = \frac{3}{5} = \frac{2/(K_m + 2)}{6/(K_m + 6)} = \frac{K_m + 6}{3(K_m + 2)}. Solving gives 9(Km+2)=5(Km+6)  ⟹  4Km=12  ⟹  Km=3.0 mM9(K_m + 2) = 5(K_m + 6) \implies 4K_m = 12 \implies K_m = 3.0\text{ mM}. Then Vmax⁡=v1⋅Km+[S]1[S]1=18⋅3.0+2.02.0=45 μM/minV_{\max} = v_1 \cdot \frac{K_m + [S]_1}{[S]_1} = 18 \cdot \frac{3.0 + 2.0}{2.0} = 45\text{ }\mu\text{M/min}.

Loading workspace…