Resources

A molecular biology laboratory engineers a strain of Saccharomyces cerevisiae that expresses an engineered cell-surface invertase targeting sucrose uptake. When the relative expression of the invertase gene (INV1INV1) is measured, the cellular sucrose uptake rate VV (in  μmol/(min⋅107 cells)\,\mu\mathrm{mol}/(\text{min}\cdot 10^7\text{ cells})) follows Michaelis-Menten kinetics relative to transcript abundance TT (in a.u.): V=Vmax⁡⋅TKT+TV = \frac{V_{\max} \cdot T}{K_T + T}, where Vmax⁡=150 μmol/(min⋅107 cells)V_{\max} = 150\,\mu\mathrm{mol}/(\text{min}\cdot 10^7\text{ cells}) and KT=2.50 a.u.K_T = 2.50\text{ a.u.} If experimental induction yields an expression level of T=7.50 a.u.T = 7.50\text{ a.u.}, calculate the percentage of maximum uptake capacity (VVmax⁡×100%\frac{V}{V_{\max}} \times 100\%) exhibited by the yeast strain.

Answer and steps

Final answer

75.0%75.0\%

Steps

01

Relate Uptake Rate to Maximum Capacity

The sucrose uptake rate VV as a function of transcript abundance TT follows saturation kinetics described by:

V=Vmax⁡⋅TKT+TV = \frac{V_{\max} \cdot T}{K_T + T}

To find the percentage of maximum uptake capacity, express the ratio of the current uptake rate VV to the maximum uptake rate Vmax⁡V_{\max}:

VVmax⁡=TKT+T\frac{V}{V_{\max}} = \frac{T}{K_T + T}

Notice that the specific value of Vmax⁡=150 \mumol/(min⋅107 cells)V_{\max} = 150\text{ \mu mol}/(\text{min}\cdot 10^7\text{ cells}) is not strictly needed for this calculation, as it cancels out of the ratio.


02

Substitute the Given Values

Substitute the experimental transcript abundance T=7.50 a.u.T = 7.50\text{ a.u.} and the half-saturation constant KT=2.50 a.u.K_T = 2.50\text{ a.u.}:

VVmax⁡=7.502.50+7.50\frac{V}{V_{\max}} = \frac{7.50}{2.50 + 7.50}

VVmax⁡=7.5010.00=0.750\frac{V}{V_{\max}} = \frac{7.50}{10.00} = 0.750


03

Convert the Ratio to a Percentage

Multiply the fractional capacity by 100%100\% to determine the percentage:

Percentage of maximum uptake capacity=0.750×100%=75.0%\text{Percentage of maximum uptake capacity} = 0.750 \times 100\% = 75.0\%

Common Pitfall: A common mistake is attempting to compute the absolute rate V=150×7.502.50+7.50=112.5 \mumol/(min⋅107 cells)V = \frac{150 \times 7.50}{2.50 + 7.50} = 112.5\text{ \mu mol}/(\text{min}\cdot 10^7\text{ cells}) first, which is valid but introduces unnecessary arithmetic steps. Another mistake is confusing the constant KTK_T with the level needed for full saturation; KTK_T is the transcript level that produces exactly half of the maximum velocity (50%50\%), not the maximal capacity itself.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 A student might omit the transcript abundance term T from the denominator, computing T / KT instead of T / (KT + T).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    V/Vmax⁡=T/KTV/V_{\max} = T/K_T

    Correct

    VVmax⁡=TKT+T\frac{V}{V_{\max}} = \frac{T}{K_T + T}

    You rearranged the kinetic equation by dividing by Vmax⁡V_{\max}, but you dropped +T+ T from the denominator. In Michaelis-Menten kinetics, the denominator must represent the sum of the half-saturation constant and the abundance term (KT+TK_T + T).

  2. Step 2

    V/Vmax⁡=7.502.50=3.0V/V_{\max} = \frac{7.50}{2.50} = 3.0

    Correct

    VVmax⁡=7.502.50+7.50=7.5010.00=0.750\frac{V}{V_{\max}} = \frac{7.50}{2.50 + 7.50} = \frac{7.50}{10.00} = 0.750

    You correctly substituted T=7.50T = 7.50 and KT=2.50K_T = 2.50, but your calculation was carried out on the incomplete formula from Step 1.

  3. Step 3

    Percentage=3.0×100%=300%\text{Percentage} = 3.0 \times 100\% = 300\%

    Correct

    Percentage=0.750×100%=75.0%\text{Percentage} = 0.750 \times 100\% = 75.0\%

    You correctly multiplied your ratio by 100%100\%, but the value was inflated by the earlier missing denominator term.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly targeted the ratio VVmax⁡\frac{V}{V_{\max}} to find the relative uptake capacity.

You accurately substituted the given values for TT and KTK_T.

You correctly converted the decimal ratio into a percentage by multiplying by 100%100\%.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of denominator term in saturation kinetics formula

No

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the Michaelis-Menten saturation ratio TKT+T\frac{T}{K_T + T} with a simple fold-difference ratio TKT\frac{T}{K_T}. In any saturation model, the reaction velocity cannot exceed the maximum capacity (V≤Vmax⁡V \le V_{\max}), meaning VVmax⁡\frac{V}{V_{\max}} must always be less than or equal to 1.01.0 (or 100%100\%).

REASONING PATH
Your ACEpath teacher’s suggested approach
Formula Structure for Saturation Kinetics
  • Dividing V=Vmax⁡⋅TKT+TV = \frac{V_{\max} \cdot T}{K_T + T} by Vmax⁡V_{\max} yields VVmax⁡=TKT+T\frac{V}{V_{\max}} = \frac{T}{K_T + T}.

  • Always verify that both the numerator and the denominator contain the variable concentration term TT.

Physiological Sanity Check
  • By definition, maximum capacity Vmax⁡V_{\max} is an asymptote that cannot be exceeded by increasing transcript abundance alone (V/Vmax⁡≤100%V/V_{\max} \le 100\%).

  • If your calculated capacity exceeds 100%100\%, check your denominator for a dropped concentration term.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. VVmax⁡=TKT+T\frac{V}{V_{\max}} = \frac{T}{K_T + T}

  2. VVmax⁡=7.502.50+7.50=7.5010.00=0.750\frac{V}{V_{\max}} = \frac{7.50}{2.50 + 7.50} = \frac{7.50}{10.00} = 0.750

  3. Percentage=0.750×100%=75.0%\text{Percentage} = 0.750 \times 100\% = 75.0\%

Final answer

75.0%75.0\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Write down the complete Michaelis-Menten rate equation before canceling or isolating variables.

  • Perform a sanity check on fractional saturation values to ensure they stay between 0%0\% and 100%100\%.

  • Practice setting up fractional capacity ratios for enzymatic and transport kinetics.

OverviewACEpath Teacher's Diagnosis

02 A student might invert the ratio in the denominator by subtracting KT rather than adding it, computing T / (T - KT).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    VVmax⁡=TT−KT\frac{V}{V_{\max}} = \frac{T}{T - K_T}

    Correct

    VVmax⁡=TKT+T\frac{V}{V_{\max}} = \frac{T}{K_T + T}

    The standard Michaelis-Menten equation has the sum KT+TK_T + T in the denominator, not the difference T−KTT - K_T.

  2. Step 2

    VVmax⁡=7.507.50−2.50=7.505.00=1.5\frac{V}{V_{\max}} = \frac{7.50}{7.50 - 2.50} = \frac{7.50}{5.00} = 1.5

    Correct

    VVmax⁡=7.502.50+7.50=7.5010.00=0.750\frac{V}{V_{\max}} = \frac{7.50}{2.50 + 7.50} = \frac{7.50}{10.00} = 0.750

    Carrying forward the subtraction error produced a ratio of 1.51.5 instead of 0.7500.750.

  3. Step 3

    Percentage=1.5×100%=150%\text{Percentage} = 1.5 \times 100\% = 150\%

    Correct

    Percentage=0.750×100%=75.0%\text{Percentage} = 0.750 \times 100\% = 75.0\%

    Multiplying your ratio by 100%100\% yielded 150%150\%, whereas the correct fractional capacity is 75.0%75.0\%.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly isolated the fractional capacity VVmax⁡\frac{V}{V_{\max}} to avoid unnecessary calculations with the absolute velocity Vmax⁡V_{\max}.

You correctly converted your calculated decimal value into a percentage by multiplying by 100%100\%.

You substituted the given numerical values of T=7.50T = 7.50 and KT=2.50K_T = 2.50 accurately into your chosen formula.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula Recall Error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You recalled or wrote the Michaelis-Menten denominator as (T−KT)(T - K_T) instead of (KT+T)(K_T + T), overlooking the biological reality that fractional saturation cannot exceed 1.01.0 (100%100\%).

REASONING PATH
Your ACEpath teacher’s suggested approach
Verify the Michaelis-Menten Denominator
  • The rate equation is V=Vmax⁡⋅[S]KM+[S]V = \frac{V_{\max} \cdot [S]}{K_M + [S]}, so the denominator is always the sum of the half-saturation constant and the substrate/transcript abundance.

  • Check that you write KT+TK_T + T so that as T→∞T \to \infty, the ratio TKT+T→1\frac{T}{K_T + T} \to 1.

Sanity-Check Fractional Capacity Bounds
  • Without cooperative allosteric activation, fractional capacity VVmax⁡\frac{V}{V_{\max}} must strictly lie in the interval [0,1)[0, 1) or [0%,100%)[0\%, 100\%).](streamdown:incomplete-link)

  • If your calculated percentage exceeds 100%100\%, immediately inspect your denominator for an inverted sign or incorrect operation.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the correct fractional capacity relationship: VVmax⁡=TKT+T\frac{V}{V_{\max}} = \frac{T}{K_T + T}.

  2. Substitute T=7.50 a.u.T = 7.50\text{ a.u.} and KT=2.50 a.u.K_T = 2.50\text{ a.u.}: VVmax⁡=7.502.50+7.50=7.5010.00=0.750\frac{V}{V_{\max}} = \frac{7.50}{2.50 + 7.50} = \frac{7.50}{10.00} = 0.750.

  3. Convert the decimal fraction to a percentage: 0.750×100%=75.0%0.750 \times 100\% = 75.0\%.

Final answer

75.0%75.0\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the derivation of the Michaelis-Menten equation from free enzyme and enzyme-substrate complex balances to anchor why the denominator is a sum.

  • Practice checking that every fractional velocity or receptor occupancy value falls strictly below 100%100\%.

OverviewACEpath Teacher's Diagnosis

03 A student might correctly calculate the fractional capacity as 0.75 but forget to multiply by 100% to express it as a percentage.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    VVmax⁡=T(KT+T)  ⟹  VVmax⁡=7.50(2.50+7.50)=7.5010.00=0.75\frac{V}{V_{\max}} = \frac{T}{(K_T + T)} \implies \frac{V}{V_{\max}} = \frac{7.50}{(2.50 + 7.50)} = \frac{7.50}{10.00} = 0.75

  2. Step 2

    Percentage=0.75%\text{Percentage} = 0.75\%

    Correct

    Percentage=0.750×100%=75.0%\text{Percentage} = 0.750 \times 100\% = 75.0\%

    To convert a decimal fraction to a percentage, you must multiply by 100%100\%. Simply writing a percent sign after 0.750.75 represents 0.75100=0.0075\frac{0.75}{100} = 0.0075, which is 100 times smaller than the true value.

WHAT YOU DID WELL
Compliments from Your Teacher

You recognized that Vmax⁡V_{\max} cancels out when expressing uptake as a fraction of capacity.

You substituted the transcript abundance and half-saturation values accurately into the Michaelis-Menten expression.

You computed the fractional capacity of 0.750.75 without arithmetic errors.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Decimal to percentage conversion error

You appended the percent symbol directly onto the decimal 0.750.75 rather than shifting the decimal point two places to the right.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating the percent symbol (%)(\%) as a label to append rather than a mathematical factor equal to 1100\frac{1}{100}, which requires multiplying the decimal by 100100.

REASONING PATH
Your ACEpath teacher’s suggested approach
Converting Decimals to Percentages
  • The symbol %\% represents 1100\frac{1}{100}. Therefore, to express a decimal DD as a percentage, evaluate D×100%D \times 100\%.

  • Always multiply the decimal value by 100100 before writing the %\% sign.

Reasonableness Check via Half-Saturation
  • When transcript level T=KTT = K_T, velocity is exactly 50%50\% of Vmax⁡V_{\max}. When T>KTT > K_T, the percentage must exceed 50%50\%.

  • Check that an expression level of 7.507.50 (which is 3×KT3 \times K_T) yields a capacity noticeably higher than 50%50\%, making 0.75%0.75\% immediately identifiable as too small.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Take the fractional capacity VVmax⁡=0.750\frac{V}{V_{\max}} = 0.750.

  2. Multiply by 100%100\% to express the fraction as a percentage: 0.750×100%=75.0%0.750 \times 100\% = 75.0\%.

Final answer

75.0%75.0\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how the percent symbol behaves as ×1100\times \frac{1}{100} so that converting from decimal to percent always scales by 100100.

  • Practice biological saturation questions where you interpret whether the operating point is above or below 50%50\% capacity as an intuitive sanity check.

Lock it in

Similar question

01

A cell-surface glucose transporter follows Michaelis-Menten kinetics with KM=4.0 mMK_M = 4.0\text{ mM}. If the extracellular glucose concentration is [S]=12.0 mM[S] = 12.0\text{ mM}, calculate the percentage of maximum transport velocity (VVmax⁡×100%\frac{V}{V_{\max}} \times 100\%) achieved by the cell.

Answer

VVmax⁡=[S]KM+[S]=12.04.0+12.0=12.016.0=0.75=75.0%\frac{V}{V_{\max}} = \frac{[S]}{K_M + [S]} = \frac{12.0}{4.0 + 12.0} = \frac{12.0}{16.0} = 0.75 = 75.0\%.

02

An engineered bacterial strain expresses a toxin-degrading enzyme with Vmax⁡=200 nmol/minV_{\max} = 200\text{ nmol}/\text{min} and KM=3.0 \muMK_M = 3.0\text{ \mu M}. Calculate the substrate concentration [S][S] required for the enzyme to operate at exactly 80.0%80.0\% of its maximum velocity.

Answer

Set VVmax⁡=0.80=[S]3.0+[S]\frac{V}{V_{\max}} = 0.80 = \frac{[S]}{3.0 + [S]}. Rearranging gives 0.80(3.0+[S])=[S]  ⟹  2.4+0.80[S]=[S]  ⟹  0.20[S]=2.4  ⟹  [S]=12.0 \muM0.80(3.0 + [S]) = [S] \implies 2.4 + 0.80[S] = [S] \implies 0.20[S] = 2.4 \implies [S] = 12.0\text{ \mu M}.

03

Two yeast promoters yield invertase transcript levels T1=1.0 a.u.T_1 = 1.0\text{ a.u.} and T2=9.0 a.u.T_2 = 9.0\text{ a.u.} in a strain where KT=3.0 a.u.K_T = 3.0\text{ a.u.} Find the fold-increase in transcript abundance (T2/T1T_2 / T_1) and compare it with the fold-increase in sucrose uptake velocity (V2/V1V_2 / V_1).

Answer

Fold-increase in transcripts: T2T1=9.01.0=9-fold\frac{T_2}{T_1} = \frac{9.0}{1.0} = 9\text{-fold}. For uptake velocities: V1Vmax⁡=1.03.0+1.0=0.25\frac{V_1}{V_{\max}} = \frac{1.0}{3.0 + 1.0} = 0.25 and V2Vmax⁡=9.03.0+9.0=0.75\frac{V_2}{V_{\max}} = \frac{9.0}{3.0 + 9.0} = 0.75. Therefore, the fold-increase in velocity is V2V1=0.750.25=3-fold\frac{V_2}{V_1} = \frac{0.75}{0.25} = 3\text{-fold}, demonstrating sub-linear saturation kinetics.

Loading workspace…