Resources

A forensic genealogy investigation utilizes shared single-nucleotide polymorphism (SNP) identity-by-descent (IBD) segments to identify an unknown subject from an open-access genetic database. Two individuals are predicted to be second cousins if they share approximately r=3.125%r = 3.125\% of their genome (218.75 cM218.75\text{ cM} out of a total autosomal map length of L=7,000 cML = 7{,}000\text{ cM}). The operational threshold for investigating a candidate branch requires at least mthresh=90.0 cMm_{\text{thresh}} = 90.0\text{ cM} of shared DNA to prevent false positive genealogical linkages. If a candidate in the repository shares mobs=105.0 cMm_{\text{obs}} = 105.0\text{ cM} across 44 contiguous segments, calculate: (a) the observed percentage cobsc_{\text{obs}} of shared autosomal genetic material, and (b) the margin of clearance M=mobs−mthreshM = m_{\text{obs}} - m_{\text{thresh}} in centimorgans above the decision threshold.

Answer and steps

Final answer

(a) cobs=105.0 cM7,000 cM×100%=1.50%c_{\text{obs}} = \frac{105.0\text{ cM}}{7{,}000\text{ cM}} \times 100\% = 1.50\%; (b) M=15.0 cMM = 15.0\text{ cM}

Steps

01

Understand the Metric of Shared Genetic Material

In genetic genealogy, identity-by-descent (IBD) segments are measured in centimorgans (cM\text{cM}), a unit reflecting recombination frequency across chromosomes. The human autosomal genome has a total map length of approximately L=7,000 cML = 7{,}000\text{ cM} when considering both homologous chromosomal sets combined ( 3,500 cM~3{,}500\text{ cM} per haploid set).

02

Calculate the Observed Shared Percentage (cobsc_{\text{obs}})

The percentage of the autosomal genome shared between the unknown subject and the candidate is the ratio of observed shared centimorgans (mobsm_{\text{obs}}) to the total autosomal map length (LL):

cobs=(mobsL)×100%c_{\text{obs}} = \left(\frac{m_{\text{obs}}}{L}\right) \times 100\%

Substitute the given values, where mobs=105.0 cMm_{\text{obs}} = 105.0\text{ cM} and L=7,000 cML = 7{,}000\text{ cM}:

cobs=(105.0 cM7,000 cM)×100%=0.015×100%=1.50%c_{\text{obs}} = \left(\frac{105.0\text{ cM}}{7{,}000\text{ cM}}\right) \times 100\% = 0.015 \times 100\% = 1.50\%

03

Calculate the Margin of Clearance (MM)

Investigative teams establish an operational cutoff threshold (mthreshm_{\text{thresh}}) to avoid pursuing false-positive genealogical connections caused by low-level, ancient background sharing (linkage disequilibrium). The margin of clearance MM is the difference between the observed shared centimorgans and this threshold:

M=mobs−mthreshM = m_{\text{obs}} - m_{\text{thresh}}

Substitute mobs=105.0 cMm_{\text{obs}} = 105.0\text{ cM} and mthresh=90.0 cMm_{\text{thresh}} = 90.0\text{ cM}:

M=105.0 cM−90.0 cM=15.0 cMM = 105.0\text{ cM} - 90.0\text{ cM} = 15.0\text{ cM}

Pitfall Note

A common mistake is using the single haploid genome length (≈3,500 cM\approx 3{,}500\text{ cM}) instead of the diploid total (7,000 cM7{,}000\text{ cM}). Always ensure the total length aligns with the genealogical standard used in the database. A shared amount of 105.0 cM105.0\text{ cM} (1.50%1.50\%) typically corresponds to a relation such as a second cousin once removed or a third cousin, comfortably clearing the 90.0 cM90.0\text{ cM} investigative threshold by 15.0 cM15.0\text{ cM}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student divides the observed shared length by the second-cousin reference length rather than the total autosomal genome length, yielding an erroneous percentage of 48.0%.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    cobs=105.0218.75×100%  ⟹  cobs=48.0%c_{\text{obs}} = \frac{105.0}{218.75} \times 100\% \implies c_{\text{obs}} = 48.0\%

    Correct

    cobs=105.0 cM7,000 cM×100%=1.50%c_{\text{obs}} = \frac{105.0\text{ cM}}{7{,}000\text{ cM}} \times 100\% = 1.50\%

    To calculate the percentage of shared autosomal genetic material, divide the observed shared centimorgans by the total autosomal map length (L=7,000 cML = 7{,}000\text{ cM}), not by the expected second-cousin reference amount (218.75 cM218.75\text{ cM}).

  2. Step 2

    M=105.0 cM−90.0 cM  ⟹  M=15.0 cMM = 105.0\text{ cM} - 90.0\text{ cM} \implies M = 15.0\text{ cM}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the margin of clearance above the operational threshold in part (b).

You properly converted your fraction into a percentage with appropriate rounding.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Denominator Selection Error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You chose the second-cousin reference amount (218.75 cM218.75\text{ cM}) as the base of your percentage rather than the total autosomal genome length (7,000 cM7{,}000\text{ cM}). The second-cousin value was provided as background context for comparison, while total percentage shared always refers to the entire genome.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify the Reference Base (Denominator)
  • The percentage of genome shared (cobsc_{\text{obs}}) represents the fraction of the complete autosomal genome: c=mobsLtotal×100%c = \frac{m_{\text{obs}}}{L_{\text{total}}} \times 100\%.

  • Scan the problem to distinguish contextual relationship benchmarks from the total genome length (LL), and always use LL in the denominator for genome-wide percentage sharing.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the total autosomal genome length: L=7,000 cML = 7{,}000\text{ cM}.

  2. Divide the candidate's shared length by total map length: cobs=105.0 cM7,000 cM×100%c_{\text{obs}} = \frac{105.0\text{ cM}}{7{,}000\text{ cM}} \times 100\%.

  3. Compute the resulting percentage: cobs=0.015×100%=1.50%c_{\text{obs}} = 0.015 \times 100\% = 1.50\%.

Final answer

(a) cobs=1.50%c_{\text{obs}} = 1.50\%; (b) M=15.0 cMM = 15.0\text{ cM}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out the algebraic formula with units before substituting values so that you ensure the denominator represents the total genome.

  • Practice differentiating between reference benchmark values (such as expected sharing between specific relatives) and universal total genome lengths in word problems.

OverviewACEpath Teacher's Diagnosis

02 The student divides the observed centimorgan value by the number of segments before calculating the margin of clearance, resulting in an incorrect clearance of -63.75 cM.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    cobs=105.07000×100%  ⟹  cobs=1.5%c_{\text{obs}} = \frac{105.0}{7000} \times 100\% \implies c_{\text{obs}} = 1.5\%

  2. Step 2

    mseg=26.25 cM  ⟹  M=26.25 cM−90.0 cM  ⟹  M=−63.75 cMm_{\text{seg}} = 26.25\text{ cM} \implies M = 26.25\text{ cM} - 90.0\text{ cM} \implies M = -63.75\text{ cM}

    Correct

    M=mobs−mthresh=105.0 cM−90.0 cM=15.0 cMM = m_{\text{obs}} - m_{\text{thresh}} = 105.0\text{ cM} - 90.0\text{ cM} = 15.0\text{ cM}

    You divided the total shared DNA (105.0 cM105.0\text{ cM}) by the 44 segments to find an average segment length of 26.25 cM26.25\text{ cM}, then subtracted the threshold from that per-segment value. The threshold mthreshm_{\text{thresh}} applies to the cumulative shared centimorgans (mobsm_{\text{obs}}), not to each individual or average segment.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the observed percentage of shared autosomal DNA as 1.5%1.5\%.

You accurately applied the formula for clearance margin subtraction, maintaining correct arithmetic throughout.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Per-segment division instead of total cumulative metric

Dividing total shared centimorgans by the segment count prior to threshold evaluation

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating cumulative shared identity-by-descent (IBD) DNA across the genome with average segment length. In genetic genealogy, decision thresholds for matching candidates are set against the total sum of shared centimorgans (mobsm_{\text{obs}}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Total vs. Segmental Metrics
  • Operational matching thresholds evaluate total shared centimorgans across all qualifying segments unless explicitly specified as a longest-segment cutoff.

  • Check whether a threshold specifies total shared cM (mobsm_{\text{obs}}) or single-segment length before dividing by segment count.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the cumulative observed sharing: mobs=105.0 cMm_{\text{obs}} = 105.0\text{ cM}.

  2. Subtract the operational threshold directly from the total observed sharing: M=105.0 cM−90.0 cMM = 105.0\text{ cM} - 90.0\text{ cM}.

Final answer

M=15.0 cMM = 15.0\text{ cM}

NEXT STEPS
Final Takeaways from Your Teacher
  • When a problem mentions segment count, confirm whether the question asks for average segment size or simply provides segment count as descriptive background.

  • Keep cumulative metrics and per-unit averages clearly separated in your scratchwork.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to multiply the fraction by 100% when calculating percentage, expressing the percentage as 0.015% instead of 1.5%.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    cobs=105.07000  ⟹  cobs=0.015%c_{\text{obs}} = \frac{105.0}{7000} \implies c_{\text{obs}} = 0.015\%

    Correct

    cobs=105.0 cM7,000 cM×100%=1.50%c_{\text{obs}} = \frac{105.0\text{ cM}}{7{,}000\text{ cM}} \times 100\% = 1.50\%

    You correctly set up the ratio of shared centimorgans to the total genome length, which evaluates to 0.0150.015. However, converting a decimal fraction into a percentage requires multiplying by 100%100\%, giving 1.50%1.50\% rather than 0.015%0.015\%.

  2. Step 2

    M=105.0 cM−90.0 cM  ⟹  M=15.0 cMM = 105.0\text{ cM} - 90.0\text{ cM} \implies M = 15.0\text{ cM}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and applied the total autosomal map length of 7,000 cM7{,}000\text{ cM} in the denominator.

You accurately calculated the division 105.07,000=0.015\frac{105.0}{7{,}000} = 0.015.

You correctly computed the margin of clearance in centimorgans with appropriate units.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Decimal-to-percentage conversion error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You appended the percent symbol directly to the decimal proportion instead of multiplying by 100100 to express the value as a percentage.

REASONING PATH
Your ACEpath teacher’s suggested approach
Converting Proportions to Percentages
  • Percentage=Proportion×100%\text{Percentage} = \text{Proportion} \times 100\%

  • Always shift the decimal point two places to the right (multiply by 100100) before adding the percent sign.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the decimal proportion to a percentage by multiplying by 100%100\%: cobs=0.015×100%=1.50%c_{\text{obs}} = 0.015 \times 100\% = 1.50\%.

  2. Retain the correct clearance margin: M=105.0 cM−90.0 cM=15.0 cMM = 105.0\text{ cM} - 90.0\text{ cM} = 15.0\text{ cM}.

Final answer

(a) cobs=1.50%c_{\text{obs}} = 1.50\%; (b) M=15.0 cMM = 15.0\text{ cM}

NEXT STEPS
Final Takeaways from Your Teacher
  • When calculating genomic sharing percentages, double-check whether the value is written as a decimal fraction (0.0150.015) or as a percentage (1.50%1.50\%).

  • Review how the percent symbol (%\%) mathematically represents 1100\frac{1}{100}, so writing 0.015%0.015\% actually means 0.000150.00015.

Lock it in

Similar question

01

A suspect shares 175.0 cM175.0\text{ cM} across multiple IBD segments with an entry in an investigative database. If the total autosomal map length is 7,000 cM7{,}000\text{ cM}, calculate the percentage of shared DNA.

Answer

c=175.0 cM7,000 cM×100%=2.50%c = \frac{175.0\text{ cM}}{7{,}000\text{ cM}} \times 100\% = 2.50\%.

02

In a genealogical database with total autosomal length L=6,800 cML = 6{,}800\text{ cM}, a candidate shares mobs=136.0 cMm_{\text{obs}} = 136.0\text{ cM}. If the investigative cutoff threshold is mthresh=100.0 cMm_{\text{thresh}} = 100.0\text{ cM}, find: (a) the observed percentage of shared DNA, and (b) the margin of clearance MM.

Answer

(a) c=136.0 cM6,800 cM×100%=2.00%c = \frac{136.0\text{ cM}}{6{,}800\text{ cM}} \times 100\% = 2.00\%; (b) M=136.0 cM−100.0 cM=36.0 cMM = 136.0\text{ cM} - 100.0\text{ cM} = 36.0\text{ cM}.

03

An analyst notes that first cousins share an average of 875.0 cM875.0\text{ cM} (12.5%12.5\% of a 7,000 cM7{,}000\text{ cM} genome). An unknown sample shares 245.0 cM245.0\text{ cM} with Person A and 140.0 cM140.0\text{ cM} with Person B. What is the total combined percentage of the autosomal genome represented by these two independent matches relative to the total genome?

Answer

Total shared length =245.0 cM+140.0 cM=385.0 cM= 245.0\text{ cM} + 140.0\text{ cM} = 385.0\text{ cM}. Combined percentage =385.0 cM7,000 cM×100%=5.50%= \frac{385.0\text{ cM}}{7{,}000\text{ cM}} \times 100\% = 5.50\%.

Loading workspace…