Resources

A comparative morphologist analyzes five vertebrate taxa (VV, WW, XX, YY, and ZZ) scored for five binary synapomorphies (coded as 00 = ancestral, 11 = derived): dorsal nerve cord, paired appendages, lungs, keratinized scales, and endothermy. The character state distributions are: VV = (1,0,0,0,0)(1, 0, 0, 0, 0); WW = (1,1,0,0,0)(1, 1, 0, 0, 0); XX = (1,1,1,0,0)(1, 1, 1, 0, 0); YY = (1,1,1,1,0)(1, 1, 1, 1, 0); and ZZ = (1,1,1,1,1)(1, 1, 1, 1, 1). Rather than determining sister taxa, calculate the Jaccard similarity coefficient (JJ) between taxon XX and taxon ZZ, defined as J=M11M01+M10+M11J = \frac{M_{11}}{M_{01} + M_{10} + M_{11}}, where M11M_{11} is the number of shared derived states (1,11, 1), M01M_{01} is the number of characters where only ZZ has the derived state, and M10M_{10} is the number of characters where only XX has the derived state.

Answer and steps

Final answer

J=35=0.600J = \frac{3}{5} = 0.600 (or 60.0%60.0\%).

Steps

Step 1: Identify the Character States for Taxon XX and Taxon ZZ

From the data provided, compare the character states position by position for taxon XX and taxon ZZ:

  • Taxon XX: (1,1,1,0,0)(1, 1, 1, 0, 0)
  • Taxon ZZ: (1,1,1,1,1)(1, 1, 1, 1, 1)

Listing the pairs of states (X,Z)(X, Z) for each of the five characters:

  1. Dorsal nerve cord: (1,1)(1, 1)
  2. Paired appendages: (1,1)(1, 1)
  3. Lungs: (1,1)(1, 1)
  4. Keratinized scales: (0,1)(0, 1)
  5. Endothermy: (0,1)(0, 1)

Step 2: Count the Components of the Jaccard Formula

Using the definitions provided in the question:

  • M11M_{11} is the number of shared derived characters where both taxa have state 11: Characters 1, 2, and 3  ⟹  M11=3\text{Characters 1, 2, and 3} \implies M_{11} = 3
  • M01M_{01} is the number of characters where taxon XX has 00 and taxon ZZ has 11: Characters 4 and 5  ⟹  M01=2\text{Characters 4 and 5} \implies M_{01} = 2
  • M10M_{10} is the number of characters where taxon XX has 11 and taxon ZZ has 00: None  ⟹  M10=0\text{None} \implies M_{10} = 0

(Note: Shared ancestral absences, denoted as M00=(0,0)M_{00} = (0, 0), are intentionally excluded from the Jaccard similarity coefficient to avoid grouping taxa solely by the lack of derived features.)


Step 3: Calculate the Jaccard Similarity Coefficient (JJ)

Substitute the counts into the formula:

J=M11M01+M10+M11J = \frac{M_{11}}{M_{01} + M_{10} + M_{11}}

J=32+0+3=35=0.600 (or 60.0%)J = \frac{3}{2 + 0 + 3} = \frac{3}{5} = 0.600\text{ (or } 60.0\%\text{)}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the Jaccard similarity coefficient with the simple matching coefficient by including shared ancestral states (M00) in the denominator.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    X = (1, 1, 1, 0, 0) ⟹ Z = (1, 1, 1, 1, 1)

  2. Step 2

    M_{11} = 3, M_{01} = 2, M_{10} = 0, M_{00} = 0

  3. Step 3

    Denominator\text{Denominator} = 2 + 0 + 3 + 2 = 7

    Correct

    Denominator\text{Denominator} = M_{01} + M_{10} + M_{11} = 2 + 0 + 3 = 5_

    You added a fourth term of 22 to the denominator. The Jaccard coefficient formula strictly excludes shared ancestral absences (M00M_{00}), defining the denominator as M01+M10+M11M_{01} + M_{10} + M_{11}. Furthermore, there are zero characters where both taxa share state 00 (M00=0M_{00} = 0), so substituting 22 counted the ancestral states of taxon XX rather than shared absences.

  4. Step 4

    J = 37\frac{3}{7}

    Correct

    J = M11M01+M10+M11\frac{M_{11}}{M_{01} + M_{10} + M_{11}} = 35\frac{3}{5} = 0.600

    Because your denominator was incorrectly calculated as 77, your final similarity coefficient propagated this error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly transcribed the character state vectors for both taxa.

You accurately identified that taxon XX and taxon ZZ share three derived states (M11=3M_{11} = 3).

You correctly identified the two characters where taxon ZZ has the derived state and taxon XX has the ancestral state (M01=2M_{01} = 2).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula & Character Matching Error

You substituted an extra term of 22 into the denominator sum, confusing the Jaccard denominator with the Simple Matching Coefficient denominator and miscounting the ancestral characters.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You included shared ancestral absence (M00M_{00}) in the denominator of the Jaccard index—which only considers characters present in at least one taxon (M01+M10+M11M_{01} + M_{10} + M_{11})—and you mistook the two ancestral zeros in taxon XX for mutual shared absences (M00M_{00}), even though taxon ZZ possesses derived states (11) at those positions.

REASONING PATH
Your ACEpath teacher’s suggested approach
Jaccard vs. Simple Matching Coefficient
  • The Jaccard index ignores mutual absences: J=M11M01+M10+M11J = \frac{M_{11}}{M_{01} + M_{10} + M_{11}}, whereas the Simple Matching Coefficient includes them: SMC=M11+M00M11+M10+M01+M00SMC = \frac{M_{11} + M_{00}}{M_{11} + M_{10} + M_{01} + M_{00}}.

  • Always verify whether the requested similarity metric excludes (0,0)(0, 0) pairings before setting up your denominator.

Pairwise Matching of Shared Absences
  • M00M_{00} counts only positions where both taxa display 00 simultaneously: (Xi=0∧Zi=0)(X_i = 0 \land Z_i = 0).

  • Do not count zeros from a single taxon; compare both taxa position by position to ensure both are 00.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the Jaccard denominator containing only characters present in at least one taxon: Denominator=M01+M10+M11\text{Denominator} = M_{01} + M_{10} + M_{11}.

  2. Substitute the counts obtained from Step 2: Denominator=2+0+3=5\text{Denominator} = 2 + 0 + 3 = 5.

  3. Compute the ratio: J=M11Denominator=35=0.600J = \frac{M_{11}}{\text{Denominator}} = \frac{3}{5} = 0.600.

Final answer

J = 35\frac{3}{5} = 0.600 (or \text{ (or } 60.0%)\text{)}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the definition of the Jaccard similarity coefficient to ensure mutual absences (M00M_{00}) are omitted from both the numerator and the denominator.

  • Practice checking character pairs column-by-column rather than counting zeros in an individual taxon's vector.

  • Work through pairwise similarity problems comparing the Jaccard index with the Simple Matching Coefficient.

OverviewACEpath Teacher's Diagnosis

02 The student counts the total number of characters across both taxa or adds the dimensions incorrectly in the denominator, taking total 1s as 3 + 5 = 8.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    X=(1,1,1,0,0)X = (1, 1, 1, 0, 0), Z=(1,1,1,1,1)  ⟹  M11=3Z = (1, 1, 1, 1, 1) \implies M_{11} = 3

  2. Step 2

    M01+M10+M11=3+5=8M_{01} + M_{10} + M_{11} = 3 + 5 = 8

    Correct

    M01=2M_{01} = 2, M10=0  ⟹  M01+M10+M11=2+0+3=5M_{10} = 0 \implies M_{01} + M_{10} + M_{11} = 2 + 0 + 3 = 5

    You added the total count of ones in taxon XX (33) and taxon ZZ (55). In the Jaccard denominator, each character position is counted at most once if either taxon has a derived state, giving M01=2M_{01} = 2, M10=0M_{10} = 0, and M11=3M_{11} = 3 for a sum of 55.

  3. Step 3

    J=38J = \frac{3}{8}

    Correct

    J=35=0.600J = \frac{3}{5} = 0.600

    Because of the miscalculated denominator, your final Jaccard similarity coefficient evaluated to 38\frac{3}{8} instead of 35\frac{3}{5}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recorded the character state vectors for both taxa.

You accurately identified the number of shared derived character states as M11=3M_{11} = 3.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Jaccard Denominator Double Counting

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the Jaccard denominator as the arithmetic sum of derived states in both taxa (∣X∣+∣Z∣=3+5|X| + |Z| = 3 + 5) instead of the union of derived states (∣X∪Z∣=M01+M10+M11|X \cup Z| = M_{01} + M_{10} + M_{11}), which double-counts the shared characters (M11M_{11}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Union vs. Sum of Sizes
  • The Jaccard denominator represents the total number of characters where at least one taxon displays state 11: ∣X∪Z∣=M01+M10+M11=∣X∣+∣Z∣−M11|X \cup Z| = M_{01} + M_{10} + M_{11} = |X| + |Z| - M_{11}.

  • Categorize each character position individually into (1,1)(1,1), (0,1)(0,1), (1,0)(1,0), or (0,0)(0,0) before summing the categories.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Count the remaining non-zero character pairings: M01=2M_{01} = 2 (characters 4 and 5) and M10=0M_{10} = 0.

  2. Calculate the denominator: M01+M10+M11=2+0+3=5M_{01} + M_{10} + M_{11} = 2 + 0 + 3 = 5.

  3. Compute the ratio: J=M11M01+M10+M11=35=0.600J = \frac{M_{11}}{M_{01} + M_{10} + M_{11}} = \frac{3}{5} = 0.600.

Final answer

J=35=0.600J = \frac{3}{5} = 0.600

NEXT STEPS
Final Takeaways from Your Teacher
  • When calculating the Jaccard similarity coefficient, make a 2×22 \times 2 contingency table or check each character position one by one to ensure no character is counted twice.

  • Remember that the denominator is the set union of derived traits, which cannot exceed the total number of evaluated characters.

OverviewACEpath Teacher's Diagnosis

03 The student swaps taxa X and Y, using Y = (1, 1, 1, 1, 0) instead of X when comparing against Z.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Comparing (1,1,1,1,0)(1, 1, 1, 1, 0) and (1,1,1,1,1)(1, 1, 1, 1, 1)

    Correct

    Taxon X=(1,1,1,0,0)X = (1, 1, 1, 0, 0) and Taxon Z=(1,1,1,1,1)Z = (1, 1, 1, 1, 1)

    You extracted the vector for taxon YY, (1,1,1,1,0)(1, 1, 1, 1, 0), instead of the vector given for taxon XX, (1,1,1,0,0)(1, 1, 1, 0, 0).

  2. Step 2

    M11=4  ⟹  M01=1  ⟹  M10=0M_{11} = 4 \implies M_{01} = 1 \implies M_{10} = 0

    Correct

    M11=3,M01=2,M10=0M_{11} = 3, M_{01} = 2, M_{10} = 0

    Your tallying logic is completely accurate for the vectors you wrote, but the counts were shifted because of the swapped taxon vector in Step 1.

  3. Step 3

    J=41+0+4=45J = \frac{4}{1 + 0 + 4} = \frac{4}{5}

    Correct

    J=32+0+3=35=0.600J = \frac{3}{2 + 0 + 3} = \frac{3}{5} = 0.600

    You correctly substituted your counts into the Jaccard index formula, but the final numerical value is affected by the initial taxon error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and applied the formula for the Jaccard similarity coefficient.

You accurately tallied the paired binary character states for the two vectors you wrote down.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Taxon Selection Misalignment

You accidentally pulled the vector for taxon YY instead of taxon XX.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

A transcription and label-tracking slip occurred when scanning the nested list of consecutive vertebrate taxa, grabbing row YY instead of row XX.

REASONING PATH
Your ACEpath teacher’s suggested approach
Data Extraction Check
  • Always write the taxon label directly next to its extracted vector before computing pairwise comparisons.

  • Explicitly label X=(1,1,1,0,0)X = (1, 1, 1, 0, 0) and Z=(1,1,1,1,1)Z = (1, 1, 1, 1, 1) on your scratch paper to verify alignment against the problem statement.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the character states for taxon X=(1,1,1,0,0)X = (1, 1, 1, 0, 0) and taxon Z=(1,1,1,1,1)Z = (1, 1, 1, 1, 1).

  2. Count the pairwise character states: characters 1, 2, and 3 are (1,1)(1, 1) so M11=3M_{11} = 3; characters 4 and 5 are (0,1)(0, 1) so M01=2M_{01} = 2; no characters are (1,0)(1, 0) so M10=0M_{10} = 0.

  3. Substitute these counts into the Jaccard index formula: J=32+0+3=35=0.600J = \frac{3}{2 + 0 + 3} = \frac{3}{5} = 0.600.

Final answer

J=35=0.600J = \frac{3}{5} = 0.600

NEXT STEPS
Final Takeaways from Your Teacher
  • Label character vectors with explicit taxon names when extracting them from multi-taxa character matrices.

  • Verify each binary position between the target taxa one by one before evaluating pairwise association indices.

Lock it in

Similar question

01

Two taxa, AA and BB, have binary character vectors A=(1,1,0,0)A = (1, 1, 0, 0) and B=(1,0,1,0)B = (1, 0, 1, 0). Calculate the Jaccard similarity coefficient (JJ) between AA and BB.

Answer

J=13J = \frac{1}{3}. Matching pairs position-by-position: position 1 is (1,1)  ⟹  M11=1(1, 1) \implies M_{11} = 1; position 2 is (1,0)  ⟹  M10=1(1, 0) \implies M_{10} = 1; position 3 is (0,1)  ⟹  M01=1(0, 1) \implies M_{01} = 1; position 4 is (0,0)  ⟹  M00=1(0, 0) \implies M_{00} = 1. The Jaccard coefficient excludes M00M_{00}: J=M11M01+M10+M11=11+1+1=13≈0.333J = \frac{M_{11}}{M_{01} + M_{10} + M_{11}} = \frac{1}{1 + 1 + 1} = \frac{1}{3} \approx 0.333.

02

Consider taxa P=(1,1,0,1,0,0)P = (1, 1, 0, 1, 0, 0) and Q=(1,0,0,1,1,0)Q = (1, 0, 0, 1, 1, 0). Compute both the Jaccard similarity coefficient (JJ) and the Simple Matching Coefficient (SMC=M11+M00M11+M10+M01+M00SMC = \frac{M_{11} + M_{00}}{M_{11} + M_{10} + M_{01} + M_{00}}).

Answer

J=24=0.500J = \frac{2}{4} = 0.500 and SMC=46≈0.667SMC = \frac{4}{6} \approx 0.667. Pairwise comparisons: (1,1)(1, 1) at positions 1 and 4 (M11=2M_{11} = 2); (1,0)(1, 0) at position 2 (M10=1M_{10} = 1); (0,1)(0, 1) at position 5 (M01=1M_{01} = 1); (0,0)(0, 0) at positions 3 and 6 (M00=2M_{00} = 2). Then J=21+1+2=24=0.500J = \frac{2}{1 + 1 + 2} = \frac{2}{4} = 0.500, while SMC=2+26=46≈0.667SMC = \frac{2 + 2}{6} = \frac{4}{6} \approx 0.667.

03

A phylogenetic dataset assesses six binary characters across three taxa: T1=(1,0,1,0,1,1)T_1 = (1, 0, 1, 0, 1, 1), T2=(0,0,1,0,1,0)T_2 = (0, 0, 1, 0, 1, 0), and T3=(1,1,1,0,0,1)T_3 = (1, 1, 1, 0, 0, 1). Identify which pair of taxa (T1T_1-T2T_2, T1T_1-T3T_3, or T2T_2-T3T_3) shares the highest Jaccard similarity coefficient, and calculate that maximum value.

Answer

Pair T1T_1-T3T_3 has the highest coefficient with J=35=0.600J = \frac{3}{5} = 0.600. For T1T_1 and T2T_2: M11=2M_{11} = 2 (chars 3, 5), M10=2M_{10} = 2 (chars 1, 6), M01=0  ⟹  J(T1,T2)=22+0+2=24=0.500M_{01} = 0 \implies J(T_1, T_2) = \frac{2}{2 + 0 + 2} = \frac{2}{4} = 0.500. For T1T_1 and T3T_3: M11=3M_{11} = 3 (chars 1, 3, 6), M10=1M_{10} = 1 (char 5), M01=1M_{01} = 1 (char 2)   ⟹  \implies J(T_1, T_3) = 31+1+3\frac{3}{1 + 1 + 3} = 35\frac{3}{5} = 0.600.For. For T_2andandT_3:: M_{11} = 1(char3),(char 3),M_{10} = 1(char5),(char 5),M_{01} = 3(chars1,2,6)  ⟹  J(T2,T3)=13+1+1=15=0.200 (chars 1, 2, 6) \implies J(T_2, T_3) = \frac{1}{3 + 1 + 1} = \frac{1}{5} = 0.200._

Loading workspace…