Resources

In cellular respiration, glucose is oxidized via the net overall reaction C6H12O6+6O2→6CO2+6H2O\text{C}_6\text{H}_{12}\text{O}_6 + 6\text{O}_2 \rightarrow 6\text{CO}_2 + 6\text{H}_2\text{O}. Under standard physiological conditions (T=298 KT = 298\text{ K}, pH=7.0\text{pH} = 7.0), the standard Gibbs free energy change of this combustion is ΔG∘′=−2870 kJ/mol\Delta G^{\circ \prime} = -2870\text{ kJ/mol}. Cellular respiration couples this exergonic oxidation to the endergonic phosphorylation of ADP: ADP+Pi→ATP+H2O\text{ADP} + \text{P}_i \rightarrow \text{ATP} + \text{H}_2\text{O}, which has a standard free energy requirement of ΔG∘′=+30.5 kJ/mol\Delta G^{\circ \prime} = +30.5\text{ kJ/mol}. If a eukaryotic cell produces a net yield of 32 mol of ATP32\text{ mol of ATP} per 1.00 mol of glucose1.00\text{ mol of glucose} fully oxidized, calculate: (a) the total energy conserved as ATP per mole of glucose, and (b) the overall thermodynamic efficiency (as a percentage) of ATP synthesis under these standard conditions.

Answer and steps

Final answer

(a) +976 kJ/mol+976\text{ kJ/mol}; (b) 34.0%34.0\%

Steps

Part (a): Calculate the Total Energy Conserved as ATP

Cellular respiration couples the exergonic catabolism of glucose to the endergonic synthesis of adenosine triphosphate (ATP\text{ATP}).

  1. Identify the standard free energy requirement per mole of ATP\text{ATP} formed: ADP+PXi→ATP+HX2O(ΔG∘′=+30.5 kJ/mol)\ce{ADP + P_i -> ATP + H2O} \quad (\Delta G^{\circ \prime} = +30.5\text{ kJ/mol})
  2. Multiply by the stoichiometry of ATP\text{ATP} produced: The complete oxidation of 1.00 mol1.00\text{ mol} of glucose yields 32 mol32\text{ mol} of ATP\text{ATP}. Therefore, the total free energy conserved in the high-energy phosphoanhydride bonds of ATP\text{ATP} is: ΔGconserved∘′=32 mol×30.5 kJ/mol=+976 kJ/mol\Delta G^{\circ \prime}_{\text{conserved}} = 32\text{ mol} \times 30.5\text{ kJ/mol} = +976\text{ kJ/mol}

Part (b): Calculate the Overall Thermodynamic Efficiency

  1. Identify the total theoretical energy available: The standard free energy released by the complete oxidation of glucose is: CX6HX12OX6+6 OX2→6 COX2+6 HX2O(ΔG∘′=−2870 kJ/mol)\ce{C6H12O6 + 6O2 -> 6CO2 + 6H2O} \quad (\Delta G^{\circ \prime} = -2870\text{ kJ/mol}) Thus, 2870 kJ/mol2870\text{ kJ/mol} of potential free energy is available per mole of glucose consumed.
  2. Calculate the percentage efficiency: Thermodynamic efficiency represents the fraction of total available energy that is successfully captured into usable chemical work (ATP\text{ATP}), rather than dissipated as heat: Efficiency=ΔGconserved∘′∣ΔGglucose oxidation∘′∣×100%\text{Efficiency} = \frac{\Delta G^{\circ \prime}_{\text{conserved}}}{|\Delta G^{\circ \prime}_{\text{glucose oxidation}}|} \times 100\% Efficiency=976 kJ/mol2870 kJ/mol×100%≈34.0%\text{Efficiency} = \frac{976\text{ kJ/mol}}{2870\text{ kJ/mol}} \times 100\% \approx 34.0\%

Common Pitfall to Avoid: Do not include negative signs in the final efficiency percentage. Free energy released is an exergonic quantity (ΔG<0\Delta G < 0) while energy stored is an endergonic quantity (ΔG>0\Delta G > 0); efficiency is calculated using the magnitude of the total energy released.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student inverts the efficiency ratio by dividing the total free energy released by the energy stored in ATP, yielding an impossible efficiency greater than 100%.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Energy conserved=32×30.5 kJ=976 kJ\text{Energy conserved} = 32 \times 30.5\text{ kJ} = 976\text{ kJ}

  2. Step 2

    Efficiency=2870 kJ976 kJ×100%  ⟹  Efficiency=294%\text{Efficiency} = \frac{2870\text{ kJ}}{976\text{ kJ}} \times 100\% \implies \text{Efficiency} = 294\%

    Correct

    Efficiency=976 kJ/mol2870 kJ/mol×100%≈34.0%\text{Efficiency} = \frac{976\text{ kJ/mol}}{2870\text{ kJ/mol}} \times 100\% \approx 34.0\%

    You inverted the efficiency formula by dividing the total input energy released by the conserved output energy, which yielded 294%294\%. Thermodynamic efficiency is always the useful energy output divided by the total available energy input.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the standard free energy requirement for ATP synthesis (+30.5 kJ/mol+30.5\text{ kJ/mol}).

You accurately calculated the total energy conserved by multiplying the ATP yield by 30.5 kJ/mol30.5\text{ kJ/mol}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted efficiency formula (input divided by output)

You set up the efficiency fraction upside down as inputoutput\frac{\text{input}}{\text{output}} instead of outputinput\frac{\text{output}}{\text{input}}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the roles of energy input (the total combustion energy of glucose released) and energy output (the chemical energy trapped in ATP), forgetting that biological thermodynamic efficiency cannot exceed 100%100\%.

REASONING PATH
Your ACEpath teacher’s suggested approach
Efficiency Definition
  • Efficiency=Useful Energy OutputTotal Energy Input×100%\text{Efficiency} = \frac{\text{Useful Energy Output}}{\text{Total Energy Input}} \times 100\%

  • Place the smaller conserved energy in the numerator and the larger total available energy in the denominator.

Sanity Check for Efficiency
  • Due to the Second Law of Thermodynamics, real biological processes always have an efficiency less than 100%100\%.

  • If your calculated efficiency exceeds 100%100\%, check immediately whether you inverted the fraction.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the useful energy captured as output: ΔGconserved∘′=976 kJ/mol\Delta G^{\circ \prime}_{\text{conserved}} = 976\text{ kJ/mol}.

  2. Identify the total available free energy input from glucose oxidation: ∣ΔGcombustion∘′∣=2870 kJ/mol|\Delta G^{\circ \prime}_{\text{combustion}}| = 2870\text{ kJ/mol}.

  3. Set up the efficiency ratio: Efficiency=976 kJ/mol2870 kJ/mol×100%\text{Efficiency} = \frac{976\text{ kJ/mol}}{2870\text{ kJ/mol}} \times 100\%.

  4. Evaluate the division: 9762870≈0.34007\frac{976}{2870} \approx 0.34007, which gives 34.0%34.0\%.

Final answer

(a) +976 kJ/mol+976\text{ kJ/mol}; (b) 34.0%34.0\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the basic definition of thermodynamic efficiency as useful outputtotal input×100%\frac{\text{useful output}}{\text{total input}} \times 100\%.

  • Perform a physical sanity check on percentage yields to ensure they remain below 100%100\%.

  • Practice calculating energetic coupling efficiencies in metabolic pathways like glycolysis and the citric acid cycle.

OverviewACEpath Teacher's Diagnosis

02 The student miscalculates the energy conserved by neglecting the stoichiometry of ATP yield per mole of glucose and evaluates the efficiency using only 1 mol of ATP.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Energy conserved per mole of glucose\text{Energy conserved per mole of glucose} = 30.5 kJ\text{ kJ}

    Correct

    Δ\Delta G^{∘\circ \prime}{conserved\text{conserved}} = 32 mol\text{ mol} ×\times 30.5 kJ/mol\text{ kJ/mol} = +976 kJ/mol\text{ kJ/mol}

    You used the energy required to synthesize a single mole of ATP (+30.5 kJ/mol+30.5\text{ kJ/mol}) instead of multiplying by the stoichiometry of 32 mol of ATP32\text{ mol of ATP} synthesized per mole of glucose oxidized.

  2. Step 2

    Efficiency\text{Efficiency} = (30.5 kJ2870 kJ)\left(\frac{30.5\text{ kJ}}{2870\text{ kJ}}\right) ×\times 100%   ⟹  \implies Efficiency\text{Efficiency} = 1.06%

    Correct

    Efficiency\text{Efficiency} = (976 kJ/mol2870 kJ/mol)\left(\frac{976\text{ kJ/mol}}{2870\text{ kJ/mol}}\right) ×\times 100% ≈\approx 34.0%

    Your efficiency ratio setup was conceptually sound, but substituting the unscaled value of 30.5 kJ30.5\text{ kJ} from part (a) carried the omission forward and yielded an artificially low efficiency.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the energy released by glucose oxidation is 2870 kJ/mol2870\text{ kJ/mol}.

You correctly recalled the standard free energy requirement of +30.5 kJ/mol+30.5\text{ kJ/mol} for ATP synthesis.

You correctly set up the efficiency formula as the ratio of conserved free energy to total available free energy multiplied by 100%100\%.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of stoichiometric ATP yield

You treated the formation of ATP on a 1:11:1 molar basis with glucose rather than scaling by the cellular yield of 32 mol of ATP32\text{ mol of ATP}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked reaction stoichiometry when converting a per-mole value of an intermediate product (ATP) to the net basis of the primary reactant (glucose).

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the stoichiometric coupling factor
  • When calculating total energy conserved, multiply the ΔG∘′\Delta G^{\circ \prime} per mole of product by the net stoichiometric yield of that product per mole of substrate: ΔGtotal=n×ΔGper mole\Delta G_{\text{total}} = n \times \Delta G_{\text{per mole}}.

  • Always identify the molar yield statement in the problem (here, 32 mol of ATP/mol of glucose32\text{ mol of ATP}/\text{mol of glucose}) and include it as a conversion factor before computing efficiency.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Multiply the molar yield of ATP by the standard free energy requirement per mole of ATP: ΔGconserved∘′=32 mol×30.5 kJ/mol=+976 kJ/mol\Delta G^{\circ \prime}_{\text{conserved}} = 32\text{ mol} \times 30.5\text{ kJ/mol} = +976\text{ kJ/mol}.

  2. Substitute the total conserved energy into the efficiency formula: Efficiency=976 kJ/mol2870 kJ/mol×100%\text{Efficiency} = \frac{976\text{ kJ/mol}}{2870\text{ kJ/mol}} \times 100\%.

  3. Evaluate the quotient: 9762870≈0.34007\frac{976}{2870} \approx 0.34007, which gives 34.0%34.0\%.

Final answer

(a) +976 kJ/mol+976\text{ kJ/mol}; (b) 34.0%34.0\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out full units including chemical identities (such as kJ/mol ATP\text{kJ}/\text{mol ATP} versus kJ/mol glucose\text{kJ}/\text{mol glucose}) to catch missing stoichiometric factors.

  • Practice energetic coupling problems for both aerobic respiration (30–32 ATP30\text{--}32\text{ ATP}) and anaerobic glycolysis (2 ATP2\text{ ATP}) to reinforce yield scaling.

Lock it in

Similar question

01

In anaerobic glycolysis in muscle cells, the conversion of 1 mol1\text{ mol} of glucose to 2 mol2\text{ mol} of lactate has a standard free energy change of ΔG∘′=−184 kJ/mol\Delta G^{\circ \prime} = -184\text{ kJ/mol}. If this pathway produces a net yield of 2 mol of ATP2\text{ mol of ATP} (requiring +30.5 kJ/mol+30.5\text{ kJ/mol} each), calculate the thermodynamic efficiency of glycolysis under standard conditions.

Answer

33.2%33.2\%. Key steps:

  1. Useful energy conserved in ATP: 2×30.5 kJ/mol=61.0 kJ/mol2 \times 30.5\text{ kJ/mol} = 61.0\text{ kJ/mol}.
  2. Efficiency: 61.0 kJ/mol184 kJ/mol×100%≈33.2%\frac{61.0\text{ kJ/mol}}{184\text{ kJ/mol}} \times 100\% \approx 33.2\%.
02

The complete oxidation of 1 mol1\text{ mol} of palmitic acid (a 1616-carbon fatty acid) yields ΔG∘′=−9790 kJ/mol\Delta G^{\circ \prime} = -9790\text{ kJ/mol}. A liver cell synthesizes 106 mol of ATP106\text{ mol of ATP} per mole of palmitate oxidized. Given ΔG∘′=+30.5 kJ/mol\Delta G^{\circ \prime} = +30.5\text{ kJ/mol} for ATP synthesis, calculate: (a) the total energy conserved as ATP, and (b) the overall thermodynamic efficiency.

Answer

(a) +3233 kJ/mol+3233\text{ kJ/mol}; (b) 33.0%33.0\%. Key steps:

  1. Energy conserved: 106×30.5 kJ/mol=3233 kJ/mol106 \times 30.5\text{ kJ/mol} = 3233\text{ kJ/mol}.
  2. Efficiency: 3233 kJ/mol9790 kJ/mol×100%≈33.0%\frac{3233\text{ kJ/mol}}{9790\text{ kJ/mol}} \times 100\% \approx 33.0\%.
03

Under actual physiological conditions in an active liver cell, the hydrolysis of ATP requires ΔG=+50.0 kJ/mol\Delta G = +50.0\text{ kJ/mol} (instead of standard +30.5 kJ/mol+30.5\text{ kJ/mol}) and the oxidation of glucose yields ΔG=−2970 kJ/mol\Delta G = -2970\text{ kJ/mol}. Assuming a yield of 32 mol of ATP32\text{ mol of ATP} per mole of glucose, calculate the actual cellular thermodynamic efficiency and explain whether it is higher or lower than the standard efficiency.

Answer

53.9%53.9\%, which is higher than under standard conditions (34.0%34.0\%). Key steps:

  1. Actual energy stored: 32×50.0 kJ/mol=1600 kJ/mol32 \times 50.0\text{ kJ/mol} = 1600\text{ kJ/mol}.
  2. Actual efficiency: 1600 kJ/mol2970 kJ/mol×100%≈53.9%\frac{1600\text{ kJ/mol}}{2970\text{ kJ/mol}} \times 100\% \approx 53.9\%.
  3. The non-standard cellular conditions shift the equilibrium, making ATP synthesis store significantly more free energy per mole, thus increasing efficiency.
Loading workspace…