Resources

A researcher isolates a 6.80 kb6.80\text{ kb} circular recombinant plasmid containing a eukaryotic coding sequence inserted into an expression vector. To determine the size of the original cloning vector prior to insertion, the researcher conducts a single-enzyme complete restriction digest using BamHIBam\text{HI}. Gel electrophoresis reveals two distinct linear DNA fragments of lengths 4.85 kb4.85\text{ kb} and 1.95 kb1.95\text{ kb}. Next, a double digest with BamHIBam\text{HI} and HindIIIHind\text{III} is performed; HindIIIHind\text{III} cuts exclusively within the cloned insert at a single location, resolving the 1.95 kb1.95\text{ kb} fragment into fragments of 1.30 kb1.30\text{ kb} and 0.65 kb0.65\text{ kb} while leaving the 4.85 kb4.85\text{ kb} fragment intact. (a) Identify which linear fragment represents the original unmodified vector backbone, and (b) determine the exact length in base pairs (bp\text{bp}) of the cloned insert.

Answer and steps

Final answer

(a) 4.85 kb4.85\text{ kb} fragment; (b) 1950 bp1950\text{ bp} (or 1.95 kb1.95\text{ kb}).

Steps

01

Analyze the Single Restriction Digest (BamHIBam\text{HI})

A circular plasmid of total size 6.80 kb6.80\text{ kb} is digested completely by the restriction enzyme BamHIBam\text{HI}.

  • Since the plasmid is circular, two cleavage sites yield two distinct linear fragments: Fragment 1=4.85 kb,Fragment 2=1.95 kb\text{Fragment 1} = 4.85\text{ kb}, \quad \text{Fragment 2} = 1.95\text{ kb}
  • Checking the sum: 4.85 kb+1.95 kb=6.80 kb4.85\text{ kb} + 1.95\text{ kb} = 6.80\text{ kb} This confirms complete digestion where the two BamHIBam\text{HI} sites flank the junction between the insert and the vector backbone.

02

Locate the Insert Using the Double Digest (BamHI+HindIIIBam\text{HI} + Hind\text{III})

In the double digest, the restriction enzyme HindIIIHind\text{III} is added, which cuts exclusively within the cloned insert at a single internal site:

  • The 4.85 kb4.85\text{ kb} fragment remains completely intact and unaffected by HindIIIHind\text{III}.
  • The 1.95 kb1.95\text{ kb} fragment is cleaved into two smaller pieces: 1.30 kb+0.65 kb=1.95 kb1.30\text{ kb} + 0.65\text{ kb} = 1.95\text{ kb}

Because HindIIIHind\text{III} cuts only inside the eukaryotic insert, any fragment cut by HindIIIHind\text{III} must contain the insert. Since the entire 1.95 kb1.95\text{ kb} fragment is resolved into internal sub-fragments while the 4.85 kb4.85\text{ kb} fragment contains no HindIIIHind\text{III} sites, the 1.95 kb1.95\text{ kb} region corresponds precisely to the cloned insert released by the flanking BamHIBam\text{HI} sites.


03

Identify the Components and Convert Units

  1. Vector Backbone: The unaffected linear fragment is the original expression vector backbone: Original vector backbone=4.85 kb\text{Original vector backbone} = 4.85\text{ kb}
  2. Cloned Insert Length in Base Pairs (bp\text{bp}): The insert corresponds to the 1.95 kb1.95\text{ kb} piece: 1.95 kb=1.95×1000 bp=1950 bp1.95\text{ kb} = 1.95 \times 1000\text{ bp} = 1950\text{ bp}

Common Pitfall: In circular DNA, the number of fragments generated by a restriction enzyme equals the number of cut sites (2 cuts →\rightarrow 2 fragments). Do not confuse circular digestion with linear DNA digestion, where nn cut sites produce n+1n + 1 fragments.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the vector backbone with the insert by assuming the larger restriction fragment must be the cloned sequence.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    HindIIIHind\text{III} cuts the 1.95 kb1.95\text{ kb} fragment into 1.30 kb1.30\text{ kb} and 0.65 kb0.65\text{ kb} fragments.

  2. Step 2

    The 1.95 kb1.95\text{ kb} fragment is modified, so the 1.95 kb1.95\text{ kb} fragment is the vector backbone.

    Correct

    Because HindIIIHind\text{III} cuts exclusively within the cloned insert, the 1.95 kb1.95\text{ kb} fragment is the insert, and the uncut 4.85 kb4.85\text{ kb} fragment is the vector backbone.

    The problem states that HindIIIHind\text{III} cuts exclusively within the cloned insert. Therefore, any fragment cut by HindIIIHind\text{III} must be the insert itself, making the unaffected 4.85 kb4.85\text{ kb} fragment the original vector backbone.

  3. Step 3

    Insert size=4.85 kb  ⟹  Insert length=4850 bp\text{Insert size} = 4.85\text{ kb} \implies \text{Insert length} = 4850\text{ bp}

    Correct

    Insert length=1.95 kb=1950 bp\text{Insert length} = 1.95\text{ kb} = 1950\text{ bp}

    Your unit conversion from kilobases to base pairs (1 kb=1000 bp1\text{ kb} = 1000\text{ bp}) is mathematically sound, but it was applied to the wrong fragment due to the misidentification in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the 1.95 kb1.95\text{ kb} fragment is the one cleaved by HindIIIHind\text{III}.

You accurately converted kilobases to base pairs using the conversion factor 1 kb=1000 bp1\text{ kb} = 1000\text{ bp}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Restriction Mapping Fragment Misidentification

You assigned the cut fragment to the vector backbone rather than the cloned insert.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked the diagnostic condition that the restriction enzyme (HindIIIHind\text{III}) cuts exclusively inside the cloned insert, which requires the digested fragment to be the insert rather than the vector backbone.

REASONING PATH
Your ACEpath teacher’s suggested approach
Locating Unique Diagnostic Sites
  • If a restriction enzyme cuts exclusively within sequence XX, only the fragment containing sequence XX will be cleaved into smaller pieces.

  • Check which fragment changes size during the secondary digest; that altered fragment corresponds directly to the region containing the enzyme's recognition site.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify that because HindIIIHind\text{III} cuts exclusively within the insert, the cleaved 1.95 kb1.95\text{ kb} fragment is the cloned insert.

  2. Deduce that the remaining uncut 4.85 kb4.85\text{ kb} linear fragment is the unmodified vector backbone.

  3. Convert the insert size from kilobases to base pairs: 1.95 kb×1000 bp/kb=1950 bp1.95\text{ kb} \times 1000\text{ bp/kb} = 1950\text{ bp}.

Final answer

(a) 4.85 kb4.85\text{ kb} fragment; (b) 1950 bp1950\text{ bp}

NEXT STEPS
Final Takeaways from Your Teacher
  • When analyzing restriction mapping data, underline which component (vector or insert) contains the diagnostic cut site.

  • Verify that the sum of the digested sub-fragments equals the original fragment length before assigning identity.

OverviewACEpath Teacher's Diagnosis

02 The student correctly identifies the 1.95 kb fragment as containing the insert, but uses a conversion factor of 1024 base pairs per kilobase instead of 1000 base pairs per kilobase for DNA.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Hind III cleaves only within the 1.95 kb1.95\text{ kb} fragment, leaving the 4.85 kb4.85\text{ kb} fragment intact.   ⟹  \implies The 4.85 kb4.85\text{ kb} fragment is the original unmodified vector backbone.

  2. Step 2

    Cloned insert=1.95 kb\text{Cloned insert} = 1.95\text{ kb}

  3. Step 3

    Insert length=1.95×1024 bp≈1997 bp\text{Insert length} = 1.95 \times 1024\text{ bp} \approx 1997\text{ bp}

    Correct

    Insert length=1.95×1000 bp=1950 bp\text{Insert length} = 1.95 \times 1000\text{ bp} = 1950\text{ bp}

    In molecular biology, the prefix kilo follows the standard decimal metric system where 1 kb=1000 bp1\text{ kb} = 1000\text{ bp}, not the binary computing factor of 10241024.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly deduced that the intact 4.85 kb4.85\text{ kb} fragment is the vector backbone.

You accurately identified that the 1.95 kb1.95\text{ kb} fragment corresponds to the cloned insert.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit conversion error (binary vs. metric kilobase)

You used 10241024 instead of 10001000 when converting kilobases (kb) to base pairs (bp).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You transferred the binary computing definition of kilo (210=10242^{10} = 1024) to molecular biology, where units strictly follow the decimal SI metric system (103=100010^3 = 1000).

REASONING PATH
Your ACEpath teacher’s suggested approach
Kilobase Definition in Genetics
  • In molecular genetics, 1 kilobase (kb)=1000 base pairs (bp)1\text{ kilobase (kb)} = 1000\text{ base pairs (bp)}, and 1 megabase (Mb)=1,000,000 base pairs (bp)1\text{ megabase (Mb)} = 1{,}000{,}000\text{ base pairs (bp)}.

  • Multiply by 10001000 (or powers of 1010) rather than powers of 22 when converting nucleic acid lengths.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Insert length=1.95 kb\text{Insert length} = 1.95\text{ kb}

  2. Insert length in bp=1.95×1000 bp=1950 bp\text{Insert length in bp} = 1.95 \times 1000\text{ bp} = 1950\text{ bp}

Final answer

(a) 4.85 kb4.85\text{ kb} fragment; (b) 1950 bp1950\text{ bp}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always use decimal metric multiples (1 kb=1000 bp1\text{ kb} = 1000\text{ bp}) when converting DNA fragment lengths.

  • Practice converting among base pairs (bp), kilobases (kb), and megabases (Mb) to reinforce standard metric prefixes in biology.

OverviewACEpath Teacher's Diagnosis

03 The student assumes the insert consists solely of the larger subfragment generated by the HindIII double digest rather than the full excised BamHI fragment.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    HindIII cleaves within the 1.95 kb1.95\text{ kb} piece into 1.30 kb1.30\text{ kb} and 0.65 kb0.65\text{ kb} pieces.   ⟹  \implies The intact 4.85 kb4.85\text{ kb} fragment represents the vector backbone.

  2. Step 2

    The cloned insert is the 1.30 kb1.30\text{ kb} fragment produced by HindIII cleavage.   ⟹  Insert length=1.30×1000 bp=1300 bp\implies \text{Insert length} = 1.30 \times 1000\text{ bp} = 1300\text{ bp}

    Correct

    Insert length=1.95 kb=1950 bp\text{Insert length} = 1.95\text{ kb} = 1950\text{ bp} (or 1.30 kb+0.65 kb=1.95 kb=1950 bp1.30\text{ kb} + 0.65\text{ kb} = 1.95\text{ kb} = 1950\text{ bp})

    Because HindIIIHind\text{III} cuts internally within the cloned insert, both the 1.30 kb1.30\text{ kb} and 0.65 kb0.65\text{ kb} pieces together constitute the full insert. The total insert length is the entire 1.95 kb1.95\text{ kb} fragment excised by BamHIBam\text{HI}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the fragment resistant to HindIIIHind\text{III} digestion is the original vector backbone.

You accurately converted kilobases to base pairs by multiplying by 10001000.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Internal restriction fragment misidentification

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated an internal cleavage product generated by HindIIIHind\text{III} as the entire insert itself, rather than recognizing that an internal restriction cut subdivides the insert into two complementary pieces that must be summed together.

REASONING PATH
Your ACEpath teacher’s suggested approach
Accounting for Internal Cleavage Sites
  • When an enzyme cuts inside a target DNA fragment, the total length of that target is the sum of all sub-fragments produced by that internal cut.

  • Add the internal sub-fragments together (1.30 kb+0.65 kb=1.95 kb1.30\text{ kb} + 0.65\text{ kb} = 1.95\text{ kb}) or use the parent band from the flanking single digest (1.95 kb1.95\text{ kb}) to find the complete insert size.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the flanking cut sites: BamHIBam\text{HI} cleaves both junctions of the circular recombinant plasmid, releasing the insert from the vector as a complete 1.95 kb1.95\text{ kb} fragment.

  2. Verify with internal digestion: HindIIIHind\text{III} cleaves once internally inside this fragment to yield 1.30 kb+0.65 kb=1.95 kb1.30\text{ kb} + 0.65\text{ kb} = 1.95\text{ kb}, confirming the entire insert length is 1.95 kb1.95\text{ kb}.

  3. Convert to base pairs: 1.95 kb×1000 bp/kb=1950 bp1.95\text{ kb} \times 1000\text{ bp/kb} = 1950\text{ bp}.

Final answer

(a) 4.85 kb4.85\text{ kb} fragment; (b) 1950 bp1950\text{ bp}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice identifying whether restriction sites flank an insert or lie entirely inside it.

  • When analyzing double digests, always verify that the sub-fragments add up to the parent single-digest fragment before assigning identity.

Lock it in

Similar question

01

A circular recombinant plasmid of 5.40 kb5.40\text{ kb} is digested to completion with EcoRIEco\text{RI}, producing fragments of 3.60 kb3.60\text{ kb} and 1.80 kb1.80\text{ kb}. A double digest with EcoRIEco\text{RI} and PstIPst\text{I} reveals that PstIPst\text{I}, which cuts at a single site located exclusively inside the vector backbone, splits the 3.60 kb3.60\text{ kb} fragment into 2.40 kb2.40\text{ kb} and 1.20 kb1.20\text{ kb} pieces while leaving the 1.80 kb1.80\text{ kb} fragment intact. Determine (a) the size of the original vector backbone and (b) the length in base pairs (extbp ext{bp}) of the cloned insert.

Answer

(a) 3.60 kb3.60\text{ kb}; (b) 1800 bp1800\text{ bp}. Because PstIPst\text{I} cuts only within the vector backbone, the cleaved 3.60 kb3.60\text{ kb} piece is the vector backbone. The intact 1.80 kb1.80\text{ kb} piece is the insert, which equals 1.80×1000 bp=1800 bp1.80 \times 1000\text{ bp} = 1800\text{ bp}.

02

A circular recombinant plasmid of size 7.20 kb7.20\text{ kb} is cleaved completely by XhoIXho\text{I} into two fragments of 4.20 kb4.20\text{ kb} and 3.00 kb3.00\text{ kb}. A secondary digest with NotINot\text{I} cuts once within the cloned insert and nowhere else, yielding fragments of 4.20 kb4.20\text{ kb}, 1.80 kb1.80\text{ kb}, and 1.20 kb1.20\text{ kb}. (a) Identify the size of the cloned insert, and (b) determine the size of the original cloning vector.

Answer

(a) 3.00 kb3.00\text{ kb}; (b) 4.20 kb4.20\text{ kb}. NotINot\text{I} cuts exclusively inside the insert, resolving the 3.00 kb3.00\text{ kb} fragment into 1.80 kb+1.20 kb=3.00 kb1.80\text{ kb} + 1.20\text{ kb} = 3.00\text{ kb}. Thus, the insert is 3.00 kb3.00\text{ kb} (3000 bp3000\text{ bp}) and the intact 4.20 kb4.20\text{ kb} fragment is the vector backbone.

03

A 6.00 kb6.00\text{ kb} expression plasmid is digested with SalISal\text{I}, yielding bands of 4.50 kb4.50\text{ kb} and 1.50 kb1.50\text{ kb}. An enzyme KpnIKpn\text{I} has two restriction sites inside the cloned insert and zero sites in the vector. Double digestion with SalISal\text{I} and KpnIKpn\text{I} produces bands of 4.50 kb4.50\text{ kb}, 0.80 kb0.80\text{ kb}, 0.50 kb0.50\text{ kb}, and 0.20 kb0.20\text{ kb}. Confirm the insert size and state how many fragments the insert was cleaved into by KpnIKpn\text{I}.

Answer

The insert size is 1.50 kb1.50\text{ kb}, cleaved into 33 fragments (0.80 kb+0.50 kb+0.20 kb=1.50 kb0.80\text{ kb} + 0.50\text{ kb} + 0.20\text{ kb} = 1.50\text{ kb}). Two internal cuts in a linear fragment yield three pieces, while the intact 4.50 kb4.50\text{ kb} fragment corresponds to the vector backbone.

Loading workspace…