Resources

In a marine carbonate chemistry survey, the solubility product constant of aragonite at 25 ∘C25\text{ }^\circ\text{C} in seawater is Ksp′=6.60×10−7 M2K'_{sp} = 6.60 \times 10^{-7}\text{ M}^2. The threshold for aragonite dissolution occurs at a saturation state of Ωarag=[Ca2+][CO32−]Ksp′=1.00\Omega_{\text{arag}} = \frac{[\text{Ca}^{2+}][\text{CO}_3^{2-}]}{K'_{sp}} = 1.00. If the dissolved calcium ion concentration in standard surface seawater is maintained at [Ca2+]=1.03×10−2 M[\text{Ca}^{2+}] = 1.03 \times 10^{-2}\text{ M}, calculate the critical threshold concentration of carbonate ions [CO32−][\text{CO}_3^{2-}] below which pteropod shells and coral skeletons begin net dissolution. Express your answer in μmol/kg\mu\text{mol/kg}, assuming the density of surface seawater is 1.025 kg/L1.025\text{ kg/L}.

Answer and steps

Final answer

[CO32−]crit=62.5 μmol/kg[\text{CO}_3^{2-}]_{\text{crit}} = 62.5\text{ }\mu\text{mol/kg}

Steps

01

Relate Saturation State to Carbonate Ion Concentration

The saturation state of aragonite, Ωarag\Omega_{\text{arag}}, is defined by the ion product of calcium and carbonate divided by the apparent solubility product constant (Ksp′K'_{sp}):

Ωarag=[CaX2+][COX3X2−]Ksp′\Omega_{\text{arag}} = \frac{[\ce{Ca^2+}][\ce{CO3^2-}]}{K'_{sp}}

The critical boundary between precipitation and dissolution occurs at chemical equilibrium, where Ωarag=1.00\Omega_{\text{arag}} = 1.00. Below this threshold (Ωarag<1.00\Omega_{\text{arag}} < 1.00), seawater becomes undersaturated, causing calcium carbonate structures such as pteropod shells and coral skeletons to undergo net dissolution.

Setting Ωarag=1.00\Omega_{\text{arag}} = 1.00 yields:

[COX3X2−]crit=Ksp′[CaX2+][\ce{CO3^2-}]_{\text{crit}} = \frac{K'_{sp}}{[\ce{Ca^2+}]}


02

Calculate the Critical Molar Concentration in Seawater

Substitute the given values into the equation:

  • Ksp′=6.60×10−7 M2K'_{sp} = 6.60 \times 10^{-7}\text{ M}^2
  • [CaX2+]=1.03×10−2 M[\ce{Ca^2+}] = 1.03 \times 10^{-2}\text{ M}

[COX3X2−]crit=6.60×10−7 mol2/L21.03×10−2 mol/L≈6.408×10−5 mol/L[\ce{CO3^2-}]_{\text{crit}} = \frac{6.60 \times 10^{-7}\text{ mol}^2/\text{L}^2}{1.03 \times 10^{-2}\text{ mol/L}} \approx 6.408 \times 10^{-5}\text{ mol/L}


03

Convert Molarity (mol/L\text{mol/L}) to Seawater Gravimetric Units (μmol/kg\mu\text{mol/kg})

In chemical oceanography, ion concentrations are conventionally expressed per unit mass of seawater (μmol/kg\mu\text{mol/kg}) rather than per unit volume (mol/L\text{mol/L}) because pressure and temperature alter volume but not mass.

  1. Convert volume-based molarity to mass-based molality using the seawater density ρ=1.025 kg/L\rho = 1.025\text{ kg/L}:

Concentration in mol/kg=[COX3X2−]critρ=6.408×10−5 mol/L1.025 kg/L≈6.2515×10−5 mol/kg\text{Concentration in mol/kg} = \frac{[\ce{CO3^2-}]_{\text{crit}}}{\rho} = \frac{6.408 \times 10^{-5}\text{ mol/L}}{1.025\text{ kg/L}} \approx 6.2515 \times 10^{-5}\text{ mol/kg}

  1. Convert moles to micromoles (1 mol=106 μmol1\text{ mol} = 10^6\text{ }\mu\text{mol}):

[COX3X2−]crit=6.2515×10−5 mol/kg×106 μmol/mol≈62.5 μmol/kg[\ce{CO3^2-}]_{\text{crit}} = 6.2515 \times 10^{-5}\text{ mol/kg} \times 10^6\text{ }\mu\text{mol/mol} \approx 62.5\text{ }\mu\text{mol/kg}

A common pitfall is multiplying by seawater density instead of dividing: since 1 L1\text{ L} of seawater weighs more than 1 kg1\text{ kg} (1.025 kg1.025\text{ kg}), the concentration per kilogram must be slightly less than the concentration per liter.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student multiplies by seawater density instead of dividing when converting from per liter to per kilogram, resulting in an overestimated concentration.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    [CO32−]=Ksp′[Ca2+]  ⟹  [CO32−]=6.60×10−71.03×10−2  ⟹  [CO32−]=6.41×10−5 mol/L[\text{CO}_3^{2-}] = \frac{K'_{sp}}{[\text{Ca}^{2+}]} \implies [\text{CO}_3^{2-}] = \frac{6.60 \times 10^{-7}}{1.03 \times 10^{-2}} \implies [\text{CO}_3^{2-}] = 6.41 \times 10^{-5}\text{ mol/L}

  2. Step 2

    [CO32−]=(6.41×10−5 mol/L)×1.025 kg/L×106 μmol/mol[\text{CO}_3^{2-}] = (6.41 \times 10^{-5}\text{ mol/L}) \times 1.025\text{ kg/L} \times 10^6\text{ }\mu\text{mol/mol}

    Correct

    [CO32−]=6.41×10−5 mol/L1.025 kg/L×106 μmol/mol[\text{CO}_3^{2-}] = \frac{6.41 \times 10^{-5}\text{ mol/L}}{1.025\text{ kg/L}} \times 10^6\text{ }\mu\text{mol/mol}

    To convert volumetric concentration (mol/L\text{mol/L}) to mass concentration (mol/kg\text{mol/kg}), you must divide by the density (kg/L\text{kg/L}). Multiplying by kg/L\text{kg/L} yields units of mol⋅kg/L2\text{mol}\cdot\text{kg}/\text{L}^2 instead of mol/kg\text{mol/kg}.

  3. Step 3

    [CO32−]=65.7 μmol/kg[\text{CO}_3^{2-}] = 65.7\text{ }\mu\text{mol/kg}

    Correct

    [CO32−]≈62.5 μmol/kg[\text{CO}_3^{2-}] \approx 62.5\text{ }\mu\text{mol/kg}

    Because of the multiplication by density in the conversion step, your final numerical value is overestimated.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly expressed the critical equilibrium relationship where Ωarag=1.00\Omega_{\text{arag}} = 1.00.

You accurately computed the molar concentration as 6.41×10−5 mol/L6.41 \times 10^{-5}\text{ mol/L}.

You used the correct factor 106 μmol/mol10^6\text{ }\mu\text{mol/mol} to convert moles to micromoles.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Density Conversion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated density multiplication as the way to switch units from liters to kilograms, overlooking dimensional analysis: dividing mol/L\text{mol/L} by kg/L\text{kg/L} cancels liters and places kilograms in the denominator.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Analysis Check
  • molL÷kgL=molkg\frac{\text{mol}}{\text{L}} \div \frac{\text{kg}}{\text{L}} = \frac{\text{mol}}{\text{kg}}

  • Write out the full unit fraction for density: divide by density so that liters cancel out and kilograms end up in the denominator.

Physical Reality Check
  • One liter of seawater has a mass greater than 1 kg1\text{ kg} (1.025 kg1.025\text{ kg}).

  • Because 1 kg1\text{ kg} is less volume than 1 L1\text{ L}, the solute contained in 1 kg1\text{ kg} of seawater must be slightly less than the solute in 1 L1\text{ L}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Divide the molar concentration by seawater density: 6.408×10−5 mol/L1.025 kg/L≈6.2515×10−5 mol/kg\frac{6.408 \times 10^{-5}\text{ mol/L}}{1.025\text{ kg/L}} \approx 6.2515 \times 10^{-5}\text{ mol/kg}.

  2. Multiply by 106 μmol/mol10^6\text{ }\mu\text{mol/mol} to convert moles to micromoles: 6.2515×10−5×106 μmol/kg≈62.5 μmol/kg6.2515 \times 10^{-5} \times 10^6\text{ }\mu\text{mol/kg} \approx 62.5\text{ }\mu\text{mol/kg}.

Final answer

[CO32−]crit=62.5 μmol/kg[\text{CO}_3^{2-}]_{\text{crit}} = 62.5\text{ }\mu\text{mol/kg}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting between molarity (mol/L\text{mol/L}) and molality/gravimetric concentration (mol/kg\text{mol/kg}) using dimensional cancellation.

  • Perform a sanity check on solutions denser than pure water: mass-based values (per kg\text{kg}) must be smaller than volume-based values (per L\text{L}).

OverviewACEpath Teacher's Diagnosis

02 The student neglects the density conversion from liters of solution to kilograms of seawater, effectively treating 1 L as 1 kg.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    [CO32−]=Ksp′[Ca2+]  ⟹  [CO32−]=6.60×10−71.03×10−2  ⟹  [CO32−]=6.41×10−5 mol/L[\text{CO}_3^{2-}] = \frac{K'_{sp}}{[\text{Ca}^{2+}]} \implies [\text{CO}_3^{2-}] = \frac{6.60 \times 10^{-7}}{1.03 \times 10^{-2}} \implies [\text{CO}_3^{2-}] = 6.41 \times 10^{-5}\text{ mol/L}

  2. Step 2

    [CO32−]=6.41×10−5×106 μmol/kg[\text{CO}_3^{2-}] = 6.41 \times 10^{-5} \times 10^6\text{ }\mu\text{mol/kg}

    Correct

    [CO32−]=6.408×10−5 mol/L1.025 kg/L×106 μmol/mol≈62.5 μmol/kg[\text{CO}_3^{2-}] = \frac{6.408 \times 10^{-5}\text{ mol/L}}{1.025\text{ kg/L}} \times 10^6\text{ }\mu\text{mol/mol} \approx 62.5\text{ }\mu\text{mol/kg}

    You converted moles to micromoles by multiplying by 10610^6, but you treated 1 L1\text{ L} of seawater as 1 kg1\text{ kg}. Because 1 L1\text{ L} of seawater weighs 1.025 kg1.025\text{ kg}, converting from mol/L\text{mol/L} to mol/kg\text{mol/kg} requires dividing by the seawater density ρ=1.025 kg/L\rho = 1.025\text{ kg/L}.

  3. Step 3

    [CO32−]=64.1 μmol/kg[\text{CO}_3^{2-}] = 64.1\text{ }\mu\text{mol/kg}

    Correct

    [CO32−]=62.5 μmol/kg[\text{CO}_3^{2-}] = 62.5\text{ }\mu\text{mol/kg}

    Your final numerical answer is shifted from the expected 62.5 μmol/kg62.5\text{ }\mu\text{mol/kg} solely because of the missing density division in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related the aragonite saturation threshold Ωarag=1.00\Omega_{\text{arag}} = 1.00 to the solubility product expression.

You substituted the given values and solved for the molar concentration in mol/L\text{mol/L} accurately.

You applied the correct prefix conversion factor of 106 μmol/mol10^6\text{ }\mu\text{mol/mol}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted density conversion between solution volume and seawater mass

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated molarity (moles per liter of solution) as equivalent to gravimetric concentration (moles per kilogram of seawater), forgetting to incorporate the given density of seawater (1.025 kg/L1.025\text{ kg/L}) using dimensional analysis.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Analysis of Volume to Mass
  • Concentration (mol/kg)=Concentration (mol/L)Density (kg/L)\text{Concentration (mol/kg)} = \frac{\text{Concentration (mol/L)}}{\text{Density (kg/L)}}

  • Always write out full dimensional units: molL×1 L1.025 kg=mol1.025 kg\frac{\text{mol}}{\text{L}} \times \frac{1\text{ L}}{1.025\text{ kg}} = \frac{\text{mol}}{1.025\text{ kg}}.

Physical Reality Check
  • Since 1 L1\text{ L} of seawater weighs more than 1 kg1\text{ kg} (1.025 kg1.025\text{ kg}), the number of ions contained in exactly 1 kg1\text{ kg} of seawater must be slightly less than the number in 1 L1\text{ L}.

  • Check whether your mass-based concentration is slightly smaller than your volume-based concentration.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert from per liter of seawater to per kilogram of seawater using density: 6.408×10−5 mol/L1.025 kg/L≈6.2515×10−5 mol/kg\frac{6.408 \times 10^{-5}\text{ mol/L}}{1.025\text{ kg/L}} \approx 6.2515 \times 10^{-5}\text{ mol/kg}.

  2. Convert moles to micromoles: 6.2515×10−5 mol/kg×106 μmol/mol≈62.5 μmol/kg6.2515 \times 10^{-5}\text{ mol/kg} \times 10^6\text{ }\mu\text{mol/mol} \approx 62.5\text{ }\mu\text{mol/kg}.

Final answer

[CO32−]crit=62.5 μmol/kg[\text{CO}_3^{2-}]_{\text{crit}} = 62.5\text{ }\mu\text{mol/kg}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review unit conversion in chemical oceanography, where dissolved constituents are measured per kilogram of seawater rather than per liter.

  • Practice converting between molarity (mol/L\text{mol/L}) and molal/gravimetric concentration (mol/kg\text{mol/kg}) using dimensional cancellation.

  • Complete the follow-up practice exercises below to master density corrections in carbonate chemistry.

OverviewACEpath Teacher's Diagnosis

03 The student misinverts the saturation state formula by multiplying [Ca²⁺] by K'sp instead of dividing.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    [COX3X2−]=Ksp′×[CaX2+]  ⟹  [COX3X2−]=(6.60×10−7)×(1.03×10−2)=6.80×10−9 mol/L[\ce{CO3^2-}] = K'_{sp} \times [\ce{Ca^2+}] \implies [\ce{CO3^2-}] = (6.60 \times 10^{-7}) \times (1.03 \times 10^{-2}) = 6.80 \times 10^{-9}\text{ mol/L}

    Correct

    [COX3X2−]=Ksp′[CaX2+]=6.60×10−71.03×10−2≈6.41×10−5 mol/L[\ce{CO3^2-}] = \frac{K'_{sp}}{[\ce{Ca^2+}]} = \frac{6.60 \times 10^{-7}}{1.03 \times 10^{-2}} \approx 6.41 \times 10^{-5}\text{ mol/L}

    When Ωarag=[CaX2+][COX3X2−]Ksp′=1.00\Omega_{\text{arag}} = \frac{[\ce{Ca^2+}][\ce{CO3^2-}]}{K'_{sp}} = 1.00, solving for [COX3X2−][\ce{CO3^2-}] requires multiplying both sides by Ksp′K'_{sp} and dividing by [CaX2+][\ce{Ca^2+}]. You multiplied Ksp′K'_{sp} by [CaX2+][\ce{Ca^2+}] instead of dividing.

  2. Step 2

    [COX3X2−]=6.80×10−91.025×106=0.00663 μmol/kg[\ce{CO3^2-}] = \frac{6.80 \times 10^{-9}}{1.025} \times 10^6 = 0.00663\text{ }\mu\text{mol/kg}

    Correct

    [COX3X2−]=6.408×10−51.025×106≈62.5 μmol/kg[\ce{CO3^2-}] = \frac{6.408 \times 10^{-5}}{1.025} \times 10^6 \approx 62.5\text{ }\mu\text{mol/kg}

    Your unit conversion method—dividing molarity by density ρ=1.025 kg/L\rho = 1.025\text{ kg/L} and multiplying by 106 μmol/mol10^6\text{ }\mu\text{mol/mol}—was set up properly, but your final numerical value was thrown off by the molarity error from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the dissolution threshold corresponds to Ωarag=1.00\Omega_{\text{arag}} = 1.00.

You applied the seawater density correctly by dividing volume-based molarity by 1.025 kg/L1.025\text{ kg/L} to find mass-based concentration.

You converted moles to micromoles accurately using the factor 106 μmol/mol10^6\text{ }\mu\text{mol/mol}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Algebraic Rearrangement Error

Multiplying [CaX2+][\ce{Ca^2+}] by Ksp′K'_{sp} instead of dividing Ksp′K'_{sp} by [CaX2+][\ce{Ca^2+}] when isolating [COX3X2−][\ce{CO3^2-}].

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the numerator factor [CaX2+][\ce{Ca^2+}] as if it were in the denominator or applied cross-multiplication across the fraction bar incorrectly, reversing the quotient into a product.

REASONING PATH
Your ACEpath teacher’s suggested approach
Isolating a Numerator Factor
  • For an equation of the form a⋅bc=1\frac{a \cdot b}{c} = 1, isolating bb requires b=cab = \frac{c}{a}.

  • Write out the intermediate step Ω⋅Ksp′=[CaX2+][COX3X2−]\Omega \cdot K'_{sp} = [\ce{Ca^2+}][\ce{CO3^2-}] first, then divide both sides by [CaX2+][\ce{Ca^2+}].

Dimensional Sanity Check
  • Ksp′K'_{sp} has units of M2\text{M}^2, while ion concentrations have units of M\text{M}.

  • Check your units: M2M=M\frac{\text{M}^2}{\text{M}} = \text{M}. Multiplying them gives M2×M=M3\text{M}^2 \times \text{M} = \text{M}^3, which alerts you immediately that the rearrangement is incorrect.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set Ωarag=1.00\Omega_{\text{arag}} = 1.00: [CaX2+][COX3X2−]critKsp′=1.00  ⟹  [COX3X2−]crit=Ksp′[CaX2+]\frac{[\ce{Ca^2+}][\ce{CO3^2-}]_{\text{crit}}}{K'_{sp}} = 1.00 \implies [\ce{CO3^2-}]_{\text{crit}} = \frac{K'_{sp}}{[\ce{Ca^2+}]}

  2. Substitute the values: [COX3X2−]crit=6.60×10−7 mol2/L21.03×10−2 mol/L≈6.408×10−5 mol/L[\ce{CO3^2-}]_{\text{crit}} = \frac{6.60 \times 10^{-7}\text{ mol}^2/\text{L}^2}{1.03 \times 10^{-2}\text{ mol/L}} \approx 6.408 \times 10^{-5}\text{ mol/L}

  3. Convert to gravimetric units using seawater density: 6.408×10−5 mol/L1.025 kg/L≈6.2515×10−5 mol/kg\frac{6.408 \times 10^{-5}\text{ mol/L}}{1.025\text{ kg/L}} \approx 6.2515 \times 10^{-5}\text{ mol/kg}

  4. Convert mol/kg\text{mol/kg} to μmol/kg\mu\text{mol/kg}: 6.2515×10−5 mol/kg×106 μmol/mol≈62.5 μmol/kg6.2515 \times 10^{-5}\text{ mol/kg} \times 10^6\text{ }\mu\text{mol/mol} \approx 62.5\text{ }\mu\text{mol/kg}

Final answer

[COX3X2−]crit=62.5 μmol/kg[\ce{CO3^2-}]_{\text{crit}} = 62.5\text{ }\mu\text{mol/kg}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out both steps of cross-multiplication when rearranging fractions with multiple terms in the numerator.

  • Use dimensional analysis to verify that the rearranged formula yields units of concentration (M\text{M} or mol/L\text{mol/L}).

Lock it in

Similar question

01

A sample of deep seawater has a dissolved inorganic carbon (DIC) concentration of 2.255 mmol/L2.255\text{ mmol/L}. If the density of the seawater is 1.025 kg/L1.025\text{ kg/L}, calculate the DIC concentration in μmol/kg\mu\text{mol/kg}.

Answer

2200 μmol/kg2200\text{ }\mu\text{mol/kg}. Key steps: Convert mmol/L\text{mmol/L} to mmol/kg\text{mmol/kg} by dividing by density: 2.255 mmol/L1.025 kg/L=2.200 mmol/kg\frac{2.255\text{ mmol/L}}{1.025\text{ kg/L}} = 2.200\text{ mmol/kg}. Convert to micromoles: 2.200×103=2200 μmol/kg2.200 \times 10^3 = 2200\text{ }\mu\text{mol/kg}.

02

In a high-latitude ocean region, the calcite solubility product is Ksp′=4.30×10−7 M2K'_{sp} = 4.30 \times 10^{-7}\text{ M}^2. Surface calcium concentration is [extCa2+]=1.00×10−2 M[ ext{Ca}^{2+}] = 1.00 \times 10^{-2}\text{ M}. Calculate the threshold concentration of [extCO32−][ ext{CO}_3^{2-}] in μmol/kg\mu\text{mol/kg} for calcite saturation (Ωcalc=1.00\Omega_{\text{calc}} = 1.00) in seawater with density ρ=1.028 kg/L\rho = 1.028\text{ kg/L}.

Answer

41.8 μmol/kg41.8\text{ }\mu\text{mol/kg}. Key steps: [extCO32−]=Ksp′[extCa2+]=4.30×10−71.00×10−2=4.30×10−5 mol/L[ ext{CO}_3^{2-}] = \frac{K'_{sp}}{[ ext{Ca}^{2+}]} = \frac{4.30 \times 10^{-7}}{1.00 \times 10^{-2}} = 4.30 \times 10^{-5}\text{ mol/L}. Divide by density: 4.30×10−5 mol/L1.028 kg/L≈4.183×10−5 mol/kg\frac{4.30 \times 10^{-5}\text{ mol/L}}{1.028\text{ kg/L}} \approx 4.183 \times 10^{-5}\text{ mol/kg}. Multiply by 106 μmol/mol10^6\text{ }\mu\text{mol/mol} to get 41.8 μmol/kg41.8\text{ }\mu\text{mol/kg}.

03

Ocean acidification lowers the surface seawater carbonate ion concentration from 210 μmol/kg210\text{ }\mu\text{mol/kg} to 140 μmol/kg140\text{ }\mu\text{mol/kg}. Given [extCa2+]=1.03×10−2 mol/kg[ ext{Ca}^{2+}] = 1.03 \times 10^{-2}\text{ mol/kg} and Ksp′=6.60×10−7 mol2/kg2K'_{sp} = 6.60 \times 10^{-7}\text{ mol}^2/\text{kg}^2 for aragonite, calculate the initial aragonite saturation state Ω1\Omega_1 and final saturation state Ω2\Omega_2. State whether aragonite net dissolution occurs in either condition.

Answer

Ω1≈3.28\Omega_1 \approx 3.28 and Ω2≈2.18\Omega_2 \approx 2.18; net dissolution does not occur in either condition. Key steps: Convert carbonate concentrations to mol/kg\text{mol/kg}: 210 μmol/kg=2.10×10−4 mol/kg210\text{ }\mu\text{mol/kg} = 2.10 \times 10^{-4}\text{ mol/kg} and 140 μmol/kg=1.40×10−4 mol/kg140\text{ }\mu\text{mol/kg} = 1.40 \times 10^{-4}\text{ mol/kg}. Ω1=(1.03×10−2)(2.10×10−4)6.60×10−7≈3.28\Omega_1 = \frac{(1.03 \times 10^{-2})(2.10 \times 10^{-4})}{6.60 \times 10^{-7}} \approx 3.28. Ω2=(1.03×10−2)(1.40×10−4)6.60×10−7≈2.18\Omega_2 = \frac{(1.03 \times 10^{-2})(1.40 \times 10^{-4})}{6.60 \times 10^{-7}} \approx 2.18. Since both values remain greater than 1.001.00, net dissolution does not occur.

Loading workspace…