Resources

In an Ames test assay evaluating chemical mutagenicity, a histidine-auxotrophic strain of Salmonella enterica\textit{Salmonella enterica} serovar Typhimurium carrying a specific frameshift mutation in the hisD\textit{hisD} gene (hisD3052hisD3052) is plated onto minimal glucose agar containing a trace amount of histidine (0.05 mM0.05\text{ mM}). In the negative control culture lacking mutagen, an average of 2222 spontaneous revertant colonies arise per plate (N=1.0×108N = 1.0 \times 10^8 cells plated). In an experimental plate exposed to 10 μg10\,\mu\mathrm{g} of 2-nitrofluorene (a known frameshift intercalator), 858858 revertant colonies are scored. (a) Determine the fold-induction of reversion caused by 2-nitrofluorene over spontaneous background. (b) Explain why a compound causing only transition substitutions would yield a negative result in the hisD3052\textit{hisD3052} strain but a positive result in the hisG46\textit{hisG46} strain.

Answer and steps

Final answer

(a) 39.039.0-fold induction (calculated as 85822\frac{858}{22}); (b) hisD3052\textit{hisD3052} contains a −1-1 frameshift mutation (a repetitive cytosine track) that specifically requires another indel (insertion/deletion) to restore the reading frame, whereas base-pair transition mutagens cannot restore reading frames; conversely, hisG46\textit{hisG46} carries a missense base substitution (5′-GAG-3′5'\text{-GAG-}3' to 5′-CCC-3′5'\text{-CCC-}3') that reverts specifically via single-base substitutions.

Steps

(a) Calculating Fold-Induction of Reversion

The fold-induction represents the relative increase in the number of revertant colonies on the mutagen-treated plate compared to the untreated negative control (spontaneous reversion background).

Fold-induction=Colonies on mutagen plateColonies on negative control plate\text{Fold-induction} = \frac{\text{Colonies on mutagen plate}}{\text{Colonies on negative control plate}}

Substitute the values given: Fold-induction=85822=39.0\text{Fold-induction} = \frac{858}{22} = 39.0

Thus, exposure to 10 μg10\text{ }\mu\text{g} of 2-nitrofluorene induces a 39.039.0-fold increase in reversion frequency over the spontaneous background rate.


(b) Mechanism of Specificity in Tester Strains

  1. Nature of the hisD3052hisD3052 Mutation (Frameshift Strain):

    • The hisD3052 allele possesses a −1-1 frameshift mutation situated within a repetitive nucleotide tract (such as a run of cytosine residues).
    • A frameshift alters the translational reading frame downstream of the mutation, producing a truncated or nonfunctional HisD protein.
    • To restore the open reading frame and produce functional histidine biosynthesis enzymes (His+\text{His}^+ revertants), a compensating insertion or deletion (indel) of nucleotides must occur.
    • A mutagen that selectively induces base-pair transitions (e.g., purine-to-purine or pyrimidine-to-pyrimidine changes such as A:T ↔G:C\ce{A:T \leftrightarrow G:C}) replaces one base pair with another without altering the net count of nucleotides. Because transitions cannot add or delete bases, they cannot correct the disrupted triplet reading frame. Therefore, the hisD3052hisD3052 strain yields a negative result.
  2. Nature of the hisG46hisG46 Mutation (Base-Pair Substitution Strain):

    • The hisG46 allele carries a missense base-pair substitution mutation (a replacement that alters a wild-type leucine codon, 5′-GAG-3′5'\text{-GAG-}3', to a mutant codon, 5′-CCC-3′5'\text{-CCC-}3', in the hisG gene).
    • Because the reading frame is intact and only a single codon is altered, reversion to a functional enzyme specifically requires a complementary base-pair substitution (either restoring the exact wild-type nucleotide or generating an acceptable missense suppressor).
    • A transition-inducing agent readily causes single base-pair replacements, successfully reverting the mutant codon and enabling growth on histidine-deficient media. Consequently, hisG46 yields a positive result.

Common Pitfall: Assuming that any mutagen will revert any auxotrophic strain. The Ames test requires a battery of distinct strains precisely because mutagens exhibit target specificity: intercalating agents typically revert frameshift mutants, while alkylating or deaminating agents typically revert base-pair substitution mutants.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student subtracts the spontaneous background before taking the ratio or calculates net fold change relative to background rather than total fold-induction.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Net induced revertants=858−22=836  ⟹  Fold-induction=83622=38-fold\text{Net induced revertants} = 858 - 22 = 836 \implies \text{Fold-induction} = \frac{836}{22} = 38\text{-fold}

    Correct

    Fold-induction=Treated coloniesSpontaneous control colonies=85822=39.0-fold\text{Fold-induction} = \frac{\text{Treated colonies}}{\text{Spontaneous control colonies}} = \frac{858}{22} = 39.0\text{-fold}

    Fold-induction represents the direct ratio of the treated signal to the control background (ExperimentalControl\frac{\text{Experimental}}{\text{Control}}). By calculating 858−2222\frac{858 - 22}{22}, you determined the net fold-increase above background rather than the total fold-induction.

  2. Step 2

    hisD3052 contains a frameshift mutation requiring an indel to restore the reading frame, so transitions cannot revert it  ⟹  hisG46 contains a base substitution directly reverted by transitions.\textit{hisD3052}\text{ contains a frameshift mutation requiring an indel to restore the reading frame, so transitions cannot revert it} \implies \textit{hisG46}\text{ contains a base substitution directly reverted by transitions.}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the distinct molecular mechanisms of reversion for frameshift versus base-substitution mutant alleles.

You accurately explained why transition mutagens fail to restore reading frames in frameshift strains like hisD3052.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Conflating fold-induction with net fractional increase

You subtracted the baseline control colonies (2222) from the treated count (858858) before dividing by the control.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused total fold-induction (the overall fold change BA\frac{B}{A}) with net fold increase (B−AA\frac{B - A}{A}). In toxicological assays like the Ames test, fold-induction is defined as the total treated colony count divided directly by the spontaneous background count.

REASONING PATH
Your ACEpath teacher’s suggested approach
Ames Test Fold-Induction Definition
  • Fold-induction=Revertants on treated plateRevertants on negative control plate\text{Fold-induction} = \frac{\text{Revertants on treated plate}}{\text{Revertants on negative control plate}}

  • Divide the experimental colony count directly by the spontaneous colony count without subtracting background first.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Fold-induction=85822\text{Fold-induction} = \frac{858}{22}

  2. Fold-induction=39.0\text{Fold-induction} = 39.0

Final answer

(a) 39.039.0-fold induction; (b) As you correctly explained, hisD3052\textit{hisD3052} has a frameshift mutation requiring compensatory indels, whereas hisG46\textit{hisG46} carries a point mutation that can be restored by transition substitutions.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the operational definitions of fold-change, fold-induction, and percent increase in laboratory bioassays.

  • Practice distinguishing between total fold-induction (TreatedControl\frac{\text{Treated}}{\text{Control}}) and net increase over baseline (Treated−ControlControl\frac{\text{Treated} - \text{Control}}{\text{Control}}).

OverviewACEpath Teacher's Diagnosis

02 The student divides the reversion counts by total plated cells to calculate reversion frequencies and mistakenly subtracts them rather than calculating fold-induction.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Spontaneous frequency=221.0×108=2.2×10−7  ⟹  Induced frequency=8581.0×108=8.58×10−6\text{Spontaneous frequency} = \frac{22}{1.0 \times 10^8} = 2.2 \times 10^{-7} \implies \text{Induced frequency} = \frac{858}{1.0 \times 10^8} = 8.58 \times 10^{-6}

  2. Step 2

    Fold-induction=8.58×10−6−2.2×10−7=8.36×10−6\text{Fold-induction} = 8.58 \times 10^{-6} - 2.2 \times 10^{-7} = 8.36 \times 10^{-6}

    Correct

    Fold-induction=85822=8.58×10−62.2×10−7=39.0\text{Fold-induction} = \frac{858}{22} = \frac{8.58 \times 10^{-6}}{2.2 \times 10^{-7}} = 39.0

    You computed the absolute difference in frequency rather than fold-induction. "Fold-induction" or "fold-change" is a multiplicative ratio comparing the treated value to the baseline control.

  3. Step 3

    hisD3052 carries a frameshift mutation that requires inserting or deleting bases to restore the reading frame, which transitions cannot do. hisG46 carries a missense substitution that can be reverted by base transitions.\textit{hisD3052}\text{ carries a frameshift mutation that requires inserting or deleting bases to restore the reading frame, which transitions cannot do. }\textit{hisG46}\text{ carries a missense substitution that can be reverted by base transitions.}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the spontaneous and induced reversion frequencies per plated cell.

You clearly articulated why transition mutations cannot correct a frameshift allele like hisD3052\textit{hisD3052}.

You correctly recognized that the missense allele hisG46\textit{hisG46} can be reverted by single-base transition events.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Ratio vs. Difference Misinterpretation

You set up a subtraction to find an absolute change rather than setting up a division to determine a fold-change ratio.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing "fold-induction" (a dimensionless quotient representing relative magnification, experimentalcontrol\frac{\text{experimental}}{\text{control}}) with absolute excess frequency (an arithmetic difference, experimental−control\text{experimental} - \text{control}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Fold-Change vs. Net Increase
  • Fold-induction represents a multiplicative comparison: Fold-induction=TreatedControl\text{Fold-induction} = \frac{\text{Treated}}{\text{Control}}.

  • Whenever an assay asks for "fold-induction" or "fold-increase", divide the induced count by the background control count.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the ratio of induced revertants to spontaneous revertants: Fold-induction=NinducedNspontaneous\text{Fold-induction} = \frac{N_{\text{induced}}}{N_{\text{spontaneous}}}.

  2. Substitute the colony counts directly: 85822=39.0\frac{858}{22} = 39.0 (or using frequencies, 8.58×10−62.2×10−7=39.0\frac{8.58 \times 10^{-6}}{2.2 \times 10^{-7}} = 39.0).

Final answer

(a) 39.039.0-fold induction; (b) hisD3052\textit{hisD3052} requires an insertion or deletion to restore the disrupted reading frame, whereas transitions only swap base pairs without altering nucleotide count; hisG46\textit{hisG46} is a missense substitution that can be corrected by transition substitutions.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review terms indicating relative change (fold-change, ratio) versus additive change (net increase, excess frequency).

  • Practice computing fold-induction directly using raw counts when both plates receive identical cell inocula.

OverviewACEpath Teacher's Diagnosis

03 The student confuses the mutation types of the Ames test strains, believing hisD3052 carries a substitution and hisG46 carries a frameshift.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Fold-induction=85822=39-fold\text{Fold-induction} = \frac{858}{22} = 39\text{-fold}

  2. Step 2

    hisD3052 carries a point mutation that requires transversions rather than transitions to revert.  ⟹  hisG46 carries a frameshift mutation which can be shifted back into frame by transition mutations.\textit{hisD3052}\text{ carries a point mutation that requires transversions rather than transitions to revert.} \implies \textit{hisG46}\text{ carries a frameshift mutation which can be shifted back into frame by transition mutations.}

    Correct

    hisD3052 carries a −1 frameshift mutation requiring an insertion/deletion to restore the reading frame, which base transitions cannot do.  ⟹  hisG46 carries a base-pair substitution mutation that reverts specifically via single-base substitutions like transitions.\textit{hisD3052}\text{ carries a }-1\text{ frameshift mutation requiring an insertion/deletion to restore the reading frame, which base transitions cannot do.} \implies \textit{hisG46}\text{ carries a base-pair substitution mutation that reverts specifically via single-base substitutions like transitions.}

    You reversed the mutation types of the two strains: the problem states that hisD3052\textit{hisD3052} has a frameshift mutation, whereas hisG46\textit{hisG46} carries a base-pair substitution. Additionally, transition substitutions replace one base pair with another without altering the total nucleotide count, so they cannot restore a shifted reading frame.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly set up and solved the fold-induction ratio using the treated and control colony counts.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted mutation classifications and mechanism

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You swapped the identities of the tester strains (treating hisD3052 as a substitution and hisG46 as a frameshift) and misunderstood that base substitutions (transitions/transversions) cannot restore an altered translational reading frame.

REASONING PATH
Your ACEpath teacher’s suggested approach
Ames Tester Strain Specificity
  • In the Ames test, each strain targets a specific reversion mechanism: hisD3052\textit{hisD3052} contains a frameshift mutation, while hisG46\textit{hisG46} contains a base-pair substitution.

  • Check the given strain definitions in the problem prompt before writing the mechanistic explanation.

Mutagen Mechanism vs. Mutation Type
  • Base transitions (e.g., A:T↔G:C\ce{A:T <-> G:C}) alter nucleotide identity without changing sequence length, meaning they cannot revert frameshifts (which require insertions or deletions).

  • Match the mutagen's biochemical action (length change vs. base replacement) to the type of lesion required to revert the auxotrophic allele.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the original lesion in hisD3052\textit{hisD3052}: it is a −1-1 frameshift mutation that disrupts the codon triplet reading frame.

  2. Deduce why transitions fail in hisD3052\textit{hisD3052}: transitions only replace a purine with another purine or a pyrimidine with another pyrimidine; without adding or deleting bases, the net reading frame remains disrupted, yielding a negative result.

  3. Identify the original lesion in hisG46\textit{hisG46}: it carries a missense base-pair substitution.

  4. Deduce why transitions succeed in hisG46\textit{hisG46}: a transition can substitute the altered base back to the wild-type base or create an acceptable functional codon, restoring histidine synthesis and giving a positive result.

Final answer

(a) 39.039.0-fold induction; (b) hisD3052\textit{hisD3052} has a frameshift mutation that requires an insertion or deletion (indel) to restore the triplet reading frame, which base transitions cannot achieve; conversely, hisG46\textit{hisG46} carries a base-pair substitution that is directly reverted by base transitions.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between indels (which alter reading frames) and base substitutions (which alter single codons without changing the reading frame).

  • Memorize the defining mutation types of standard Ames tester strains (extithisD3052 extit{hisD3052}/extTA98 ext{TA98} for frameshifts, extithisG46 extit{hisG46}/extTA100 ext{TA100} for substitutions).

Lock it in

Similar question

01

In an Ames test using the base-substitution strain hisG46\textit{hisG46}, the spontaneous reversion rate yields an average of 1818 colonies per plate. A plate treated with 5 \mug5\text{ \mu g} of sodium azide produces 522522 colonies. Calculate the fold-induction of reversion over spontaneous background.

Answer

Fold-induction=52218=29.0\text{Fold-induction} = \frac{522}{18} = 29.0-fold.

02

An Ames test guideline considers a chemical mutagenic if it produces at least a 2.02.0-fold induction over spontaneous background (the 'two-fold rule'). If the negative control plate averages 3434 colonies, what is the minimum number of colonies required on the treated plate to meet this criterion?

Answer

Minimum colonies =34×2.0=68= 34 \times 2.0 = 68 colonies.

03

A researcher exposes hisD3052\textit{hisD3052} and hisG46\textit{hisG46} to ethyl methanesulfonate (EMS), an alkylating agent that predominantly induces G:C→A:T\text{G:C} \to \text{A:T} transitions. Predict which strain will show significant fold-induction and explain why in terms of reading frame versus codon identity.

Answer

hisG46\textit{hisG46} will show significant fold-induction, while hisD3052\textit{hisD3052} will not. EMS causes transition substitutions, which can revert the missense mutation in hisG46\textit{hisG46} by changing codon identity without altering the reading frame. hisD3052\textit{hisD3052} carries a −1-1 frameshift that requires an insertion or deletion to restore the triplet reading frame, which point transitions cannot achieve.

Loading workspace…