Resources

A student measures the oxygen consumption of germinating peas over time using a calibrated microrespirometer. At temperature T1=20∘CT_1 = 20^\circ\text{C}, the respiration rate is measured to be R1=0.35 mL O2/(g⋅h)R_1 = 0.35\text{ mL }\text{O}_2/(\text{g}\cdot\text{h}). When the chamber temperature is raised to T2=30∘CT_2 = 30^\circ\text{C}, the respiration rate increases to R2=0.77 mL O2/(g⋅h)R_2 = 0.77\text{ mL }\text{O}_2/(\text{g}\cdot\text{h}). Using the biological temperature coefficient relationship Q10=(R2R1)10T2−T1Q_{10} = \left(\frac{R_2}{R_1}\right)^{\frac{10}{T_2 - T_1}}, calculate the experimental Q10Q_{10} value for the germinating peas over this temperature interval.

Answer and steps

Final answer

2.22.2

Steps

01

Identify the Given Values

Understanding the Temperature Coefficient (Q10Q_{10})

The temperature coefficient, Q10Q_{10}, is a measure of the rate of change of a biological or chemical system as a consequence of increasing the temperature by 10∘C10^\circ\text{C}. It is defined by the formula: Q10=(R2R1)10T2−T1Q_{10} = \left(\frac{R_2}{R_1}\right)^{\frac{10}{T_2 - T_1}} where:

  • T1T_1 and T2T_2 are the initial and final temperatures, respectively.
  • R1R_1 and R2R_2 are the reaction or respiration rates measured at T1T_1 and T2T_2, respectively.

From the experimental data:

  • Initial temperature: T1=20∘CT_1 = 20^\circ\text{C}
  • Respiration rate at T1T_1: R1=0.35 mL OX2/(g⋅h)R_1 = 0.35\text{ mL }\ce{O2}/(\text{g}\cdot\text{h})
  • Final temperature: T2=30∘CT_2 = 30^\circ\text{C}
  • Respiration rate at T2T_2: R2=0.77 mL OX2/(g⋅h)R_2 = 0.77\text{ mL }\ce{O2}/(\text{g}\cdot\text{h})

02

Determine the Temperature Difference and the Exponent

Find the temperature interval: T2−T1=30∘C−20∘C=10∘CT_2 - T_1 = 30^\circ\text{C} - 20^\circ\text{C} = 10^\circ\text{C}

Now substitute this into the exponent term: 10T2−T1=1010=1\frac{10}{T_2 - T_1} = \frac{10}{10} = 1

Because the interval is exactly 10∘C10^\circ\text{C}, the exponent simplifies directly to 11.


03

Compute the Value of Q10Q_{10}

Substitute the respiration rates and the simplified exponent into the formula:

Q10=(0.770.35)1=0.770.35Q_{10} = \left(\frac{0.77}{0.35}\right)^1 = \frac{0.77}{0.35}

Simplify the fraction by dividing numerator and denominator by 0.070.07: 0.770.35=7735=115=2.2\frac{0.77}{0.35} = \frac{77}{35} = \frac{11}{5} = 2.2

A Q10Q_{10} value of 2.22.2 is typical for cellular respiration in plant tissues (generally between 2.02.0 and 3.03.0), indicating that the rate of oxygen consumption slightly more than doubles with a 10∘C10^\circ\text{C} temperature increase.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student inverts the ratio of rates as R₁/R₂ instead of R₂/R₁, resulting in an erroneous Q₁₀ value of approximately 0.45.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Q10=(R1R2)10T2−T1  ⟹  Q10=(0.350.77)1030−20Q_{10} = \left(\frac{R_1}{R_2}\right)^{\frac{10}{T_2 - T_1}} \implies Q_{10} = \left(\frac{0.35}{0.77}\right)^{\frac{10}{30-20}}

    Correct

    Q10=(R2R1)10T2−T1=(0.770.35)1030−20Q_{10} = \left(\frac{R_2}{R_1}\right)^{\frac{10}{T_2 - T_1}} = \left(\frac{0.77}{0.35}\right)^{\frac{10}{30-20}}

    You inverted the base ratio by writing R1R2\frac{R_1}{R_2} instead of the final rate divided by the initial rate, R2R1\frac{R_2}{R_1}.

  2. Step 2

    Q10=(0.4545)1  ⟹  Q10=0.45Q_{10} = (0.4545)^1 \implies Q_{10} = 0.45

    Correct

    Q10=(2.2)1=2.2Q_{10} = (2.2)^1 = 2.2

    You correctly simplified the exponent 1010=1\frac{10}{10} = 1 and evaluated the division accurately, but the result was affected by the inverted ratio in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and substituted the two temperatures into the exponent 10T2−T1\frac{10}{T_2 - T_1}.

You correctly evaluated the exponent as 11 and accurately computed the quotient of your written fraction.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Rate Ratio in Q10 Formula

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You placed the initial rate in the numerator and the final rate in the denominator (R1/R2R_1 / R_2). Because respiration rate increased from 20∘C20^\circ\text{C} to 30∘C30^\circ\text{C}, the biological temperature coefficient Q10Q_{10} must be greater than 11, requiring the higher-temperature rate R2R_2 to be in the numerator.

REASONING PATH
Your ACEpath teacher’s suggested approach
Rate Ratio Orientation
  • Q10Q_{10} measures the factor by which the rate increases for every 10∘C10^\circ\text{C} rise: Ratio=Rate at higher temperature (R2)Rate at lower temperature (R1)\text{Ratio} = \frac{\text{Rate at higher temperature } (R_2)}{\text{Rate at lower temperature } (R_1)}.

  • When setting up the base of the power, always place the final, higher-temperature rate R2R_2 over the initial rate R1R_1.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the correct formula: Q10=(R2R1)10T2−T1Q_{10} = \left(\frac{R_2}{R_1}\right)^{\frac{10}{T_2 - T_1}}

  2. Substitute the values: Q10=(0.770.35)1030−20Q_{10} = \left(\frac{0.77}{0.35}\right)^{\frac{10}{30 - 20}}

  3. Simplify the exponent and ratio: Q10=(7735)1=115=2.2Q_{10} = \left(\frac{77}{35}\right)^1 = \frac{11}{5} = 2.2

Final answer

2.22.2

NEXT STEPS
Final Takeaways from Your Teacher
  • Always perform a biological sanity check: if the rate speeds up with warming, your Q10Q_{10} must be greater than 11.

  • Double-check that the rate corresponding to T2T_2 is in the numerator and the rate corresponding to T1T_1 is in the denominator.

OverviewACEpath Teacher's Diagnosis

02 The student multiplies the rate ratio by the temperature factor rather than raising it to the power, calculating (0.77/0.35) * (10/10) = 2.2 which coincidentally matches only because the exponent is 1, but when omitting the exponentiation structure writes Q₁₀ = (R₂ - R₁)/(T₂ - T₁) or multiplies.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Q10=R2−R1T2−T1Q_{10} = \frac{R_2 - R_1}{T_2 - T_1}

    Correct

    Q10=(R2R1)10T2−T1Q_{10} = \left(\frac{R_2}{R_1}\right)^{\frac{10}{T_2 - T_1}}

    You set up Q10Q_{10} as the difference in respiration rates divided by the temperature difference. Because Q10Q_{10} measures the factor (fold-change) by which a rate multiplies over a 10∘C10^\circ\text{C} increase, it is defined as a ratio of rates raised to a power, not a linear slope.

  2. Step 2

    Q10=0.77−0.3530−20  ⟹  Q10=0.4210Q_{10} = \frac{0.77 - 0.35}{30 - 20} \implies Q_{10} = \frac{0.42}{10}

    Correct

    Q10=(0.770.35)1030−20  ⟹  Q10=(0.770.35)1Q_{10} = \left(\frac{0.77}{0.35}\right)^{\frac{10}{30 - 20}} \implies Q_{10} = \left(\frac{0.77}{0.35}\right)^1

    You substituted your values accurately into the linear slope expression, but the calculation inherits the formula error from Step 1.

  3. Step 3

    Q10=0.042Q_{10} = 0.042

    Correct

    Q10=2.2Q_{10} = 2.2

    Your arithmetic division 0.4210=0.042\frac{0.42}{10} = 0.042 was performed accurately, but evaluating the correct rate ratio gives 0.770.35=2.2\frac{0.77}{0.35} = 2.2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly matched each experimental value (R1R_1, R2R_2, T1T_1, and T2T_2) from the problem statement.

You completed your multi-step arithmetic and decimal division accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula Selection Error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the temperature coefficient Q10Q_{10} (which expresses multiplicative fold-change across a 10∘C10^\circ\text{C} temperature span) with an average rate of change (linear slope, ΔyΔx\frac{\Delta y}{\Delta x}).

REASONING PATH
Your ACEpath teacher’s suggested approach
$Q_{10}$ Represents Fold-Change, Not Slope
  • Q10Q_{10} describes multiplicative scaling: Q10=(R2R1)10T2−T1Q_{10} = \left(\frac{R_2}{R_1}\right)^{\frac{10}{T_2 - T_1}}. It is a dimensionless ratio, not a rate per degree Celsius.

  • Whenever calculating Q10Q_{10}, write down the ratio of rates R2R1\frac{R_2}{R_1} as the base and 10ΔT\frac{10}{\Delta T} as the exponent before substituting numerical values.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write down the standard temperature coefficient formula: Q10=(R2R1)10T2−T1Q_{10} = \left(\frac{R_2}{R_1}\right)^{\frac{10}{T_2 - T_1}}.

  2. Substitute the measured rates and temperatures: Q10=(0.770.35)1030−20Q_{10} = \left(\frac{0.77}{0.35}\right)^{\frac{10}{30 - 20}}.

  3. Simplify the exponent: 1030−20=1010=1\frac{10}{30 - 20} = \frac{10}{10} = 1.

  4. Evaluate the rate ratio: 0.770.35=7735=2.2\frac{0.77}{0.35} = \frac{77}{35} = 2.2.

Final answer

2.22.2

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize that Q10Q_{10} uses a quotient (rate ratio) rather than a subtraction (rate difference) because biological reactions accelerate exponentially with temperature.

  • Notice that when the temperature interval is exactly 10∘C10^\circ\text{C}, the exponent 10ΔT\frac{10}{\Delta T} equals 11, simplifying the calculation directly to R2R1\frac{R_2}{R_1}.

  • Practice checking whether your final Q10Q_{10} value falls in the typical biological range of 2.02.0 to 3.03.0 for enzyme-catalyzed cellular respiration.

OverviewACEpath Teacher's Diagnosis

03 The student inverts the temperature difference in the exponent as (T₁ - T₂), yielding a negative exponent and a value of 0.45.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Q10=(R2R1)10T1−T2Q_{10} = \left(\frac{R_2}{R_1}\right)^{\frac{10}{T_1 - T_2}}

    Correct

    Q10=(R2R1)10T2−T1Q_{10} = \left(\frac{R_2}{R_1}\right)^{\frac{10}{T_2 - T_1}}

    You reversed the order of subtraction in the exponent's denominator. The denominator must be the final temperature minus the initial temperature, T2−T1T_2 - T_1, representing ΔT\Delta T.

  2. Step 2

    Q10=(0.770.35)1020−30  ⟹  Q10=(2.2)−1Q_{10} = \left(\frac{0.77}{0.35}\right)^{\frac{10}{20 - 30}} \implies Q_{10} = (2.2)^{-1}

    Correct

    Q10=(0.770.35)1030−20  ⟹  Q10=(2.2)1Q_{10} = \left(\frac{0.77}{0.35}\right)^{\frac{10}{30 - 20}} \implies Q_{10} = (2.2)^1

    You substituted your values and calculated the rate ratio 0.770.35=2.2\frac{0.77}{0.35} = 2.2 accurately, but the inverted temperature difference yielded an exponent of 10−10=−1\frac{10}{-10} = -1 rather than +1+1.

  3. Step 3

    Q10=0.45Q_{10} = 0.45

    Correct

    Q10=2.2Q_{10} = 2.2

    Evaluating (2.2)−1≈0.45(2.2)^{-1} \approx 0.45 correctly follows your earlier algebraic error, but it inverts the true physiological factor.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and substituted the respiration rates R1=0.35R_1 = 0.35 and R2=0.77R_2 = 0.77.

You computed the rate quotient 0.770.35=2.2\frac{0.77}{0.35} = 2.2 with precision.

You correctly applied the negative exponent rule to evaluate (2.2)−1≈0.45(2.2)^{-1} \approx 0.45.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reversed temperature difference in exponent

You set the exponent denominator as T1−T2T_1 - T_2 rather than T2−T1T_2 - T_1, creating an inverted power.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the direction of change (ΔT=final−initial\Delta T = \text{final} - \text{initial}) with an arbitrary subtraction order led to a negative exponent, which implies that reaction rate decreases as temperature increases.

REASONING PATH
Your ACEpath teacher’s suggested approach
Biological plausibility check
  • For biological processes within normal physiological ranges, increasing temperature increases enzyme activity and metabolic rate, meaning Q10Q_{10} must typically be >1> 1 (usually between 2.02.0 and 3.03.0).

  • If your calculated Q10<1Q_{10} < 1 for a rate that increased with temperature, immediately check whether your temperature difference T2−T1T_2 - T_1 was subtracted backwards.

Exponent alignment
  • In the quotient R2R1\frac{R_2}{R_1}, the numerator is the rate at T2T_2 and the denominator is the rate at T1T_1. Therefore, the exponent denominator must align as T2−T1T_2 - T_1.

  • Confirm that both terms represent change from state 1 to state 2: ΔT=T2−T1\Delta T = T_2 - T_1.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the standard Q10Q_{10} formula with the correct temperature interval in the denominator: Q10=(R2R1)10T2−T1Q_{10} = \left(\frac{R_2}{R_1}\right)^{\frac{10}{T_2 - T_1}}.

  2. Substitute the temperatures: T2−T1=30∘C−20∘C=10∘CT_2 - T_1 = 30^\circ\text{C} - 20^\circ\text{C} = 10^\circ\text{C}, giving an exponent of 1010=1\frac{10}{10} = 1.

  3. Evaluate the base: R2R1=0.770.35=2.2\frac{R_2}{R_1} = \frac{0.77}{0.35} = 2.2.

  4. Calculate the final value: Q10=(2.2)1=2.2Q_{10} = (2.2)^1 = 2.2.

Final answer

2.22.2

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the exponent denominator explicitly as ΔT=Tfinal−Tinitial\Delta T = T_{\text{final}} - T_{\text{initial}}.

  • Perform a sanity check on your final Q10Q_{10}: since the respiration rate increased from 0.350.35 to 0.770.77, Q10Q_{10} must be greater than 11.

Lock it in

Similar question

01

The rate of oxygen consumption of an ectotherm is 0.40 mL O2/h0.40\text{ mL }\text{O}_2/\text{h} at 12∘C12^\circ\text{C} and 1.00 mL O2/h1.00\text{ mL }\text{O}_2/\text{h} at 22∘C22^\circ\text{C}. Calculate the Q10Q_{10} value for this organism.

Answer

2.52.5. Key steps: Identify T1=12∘CT_1 = 12^\circ\text{C}, T2=22∘CT_2 = 22^\circ\text{C}, R1=0.40R_1 = 0.40, R2=1.00R_2 = 1.00. Compute the exponent 1022−12=1\frac{10}{22 - 12} = 1. Evaluate Q10=(R2R1)1=1.000.40=2.5Q_{10} = \left(\frac{R_2}{R_1}\right)^1 = \frac{1.00}{0.40} = 2.5.

02

A bacterial culture has a metabolic rate of 1.2 mmol/min1.2\text{ mmol}/\text{min} at 15∘C15^\circ\text{C} and 4.8 mmol/min4.8\text{ mmol}/\text{min} at 35∘C35^\circ\text{C}. Calculate Q10Q_{10}.

Answer

2.02.0. Key steps: R1=1.2R_1 = 1.2, R2=4.8R_2 = 4.8, T1=15∘CT_1 = 15^\circ\text{C}, T2=35∘CT_2 = 35^\circ\text{C}. The rate ratio is R2R1=4.81.2=4\frac{R_2}{R_1} = \frac{4.8}{1.2} = 4. The exponent is 1035−15=1020=0.5\frac{10}{35 - 15} = \frac{10}{20} = 0.5. Thus, Q10=40.5=4=2.0Q_{10} = 4^{0.5} = \sqrt{4} = 2.0.

03

An enzymatic reaction has a Q10Q_{10} of 2.42.4. If the reaction rate is 5.0 μmol/s5.0\,\mu\text{mol}/\text{s} at 18∘C18^\circ\text{C}, what is the predicted rate at 28∘C28^\circ\text{C}?

Answer

12 μmol/s12\,\mu\text{mol}/\text{s}. Key steps: Since T2−T1=28−18=10∘CT_2 - T_1 = 28 - 18 = 10^\circ\text{C}, the exponent is 11, so Q10=R2R1Q_{10} = \frac{R_2}{R_1}. Substitute known values: 2.4=R25.0  ⟹  R2=2.4×5.0=12 μmol/s2.4 = \frac{R_2}{5.0} \implies R_2 = 2.4 \times 5.0 = 12\,\mu\text{mol}/\text{s}.

Loading workspace…