Resources

In a developing dicot root apical meristem, primary growth is driven by cell divisions in the zone of division followed by cell expansion in the zone of elongation. A cohort of newly formed cortical cells has an initial mean length of l0=18.0 μml_0 = 18.0\text{ }\mu\text{m}. As these cells pass through the elongation zone, active proton pumping into the apoplast activates expansins, driving cell elongation along the longitudinal axis until a final mean length of lf=162.0 μml_f = 162.0\text{ }\mu\text{m} is attained. Calculate: (a) the relative elemental growth rate expressed as the fold increase in cell length, and (b) the percentage contribution of cellular elongation (versus initial cell length) to the final mature cell length.

Answer and steps

Final answer

(a) 9.00-fold increase9.00\text{-fold increase}; (b) 88.9%88.9\%

Steps

Part (a): Determining the Fold Increase in Cell Length

  1. Identify the Given Parameters:

    • Initial mean cell length in the meristematic zone: l0=18.0 μml_0 = 18.0\text{ }\mu\text{m}
    • Final mean cell length after moving through the elongation zone: lf=162.0 μml_f = 162.0\text{ }\mu\text{m}
  2. Calculate the Fold Increase: The fold increase represents the ratio of the final length to the initial length: Fold Increase=lfl0\text{Fold Increase} = \frac{l_f}{l_0} Fold Increase=162.0 μm18.0 μm=9.00\text{Fold Increase} = \frac{162.0\text{ }\mu\text{m}}{18.0\text{ }\mu\text{m}} = 9.00

    Therefore, cell length increases by a factor of 9.009.00 (a 9.00-fold increase9.00\text{-fold increase}).

    Common Pitfall: Avoid confusing fold increase (lfl0=9.00\frac{l_f}{l_0} = 9.00) with relative percent increase (lf−l0l0×100%=800%\frac{l_f - l_0}{l_0} \times 100\% = 800\%).


Part (b): Determining the Percentage Contribution of Elongation to Final Length

  1. Determine the Extent of Elongation (Δl\Delta l): The total length gained specifically through cellular expansion is the difference between the final length and the initial length: Δl=lf−l0=162.0 μm−18.0 μm=144.0 μm\Delta l = l_f - l_0 = 162.0\text{ }\mu\text{m} - 18.0\text{ }\mu\text{m} = 144.0\text{ }\mu\text{m}
  2. Calculate Contribution to Final Length: The proportion of the final mature length attributable strictly to post-mitotic elongation is given by: Percentage Contribution=(Δllf)×100%\text{Percentage Contribution} = \left(\frac{\Delta l}{l_f}\right) \times 100\% Percentage Contribution=(144.0 μm162.0 μm)×100%=89×100%≈88.89%\text{Percentage Contribution} = \left(\frac{144.0\text{ }\mu\text{m}}{162.0\text{ }\mu\text{m}}\right) \times 100\% = \frac{8}{9} \times 100\% \approx 88.89\%

    Rounding to three significant figures yields 88.9%88.9\%.

    Insight: Nearly nine-tenths of the final cell length comes from longitudinal expansion powered by vacuolar turgor pressure and expansin-mediated cell wall loosening, highlighting that the elongation zone is the primary driver of root extension through soil.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student divides the elongation by the initial length instead of the final length, confusing percentage contribution to mature length with percentage increase over initial length.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Fold increase=162.0/18.0=9-fold\text{Fold increase} = 162.0 / 18.0 = 9\text{-fold}

  2. Step 2

    Elongation=162.0−18.0=144.0 μm\text{Elongation} = 162.0 - 18.0 = 144.0\text{ }\mu\text{m}

  3. Step 3

    Percentage contribution=(144.0/18.0)∗100%  ⟹  =800%\text{Percentage contribution} = (144.0 / 18.0) * 100\% \implies = 800\%

    Correct

    Percentage contribution=(Δllf)×100%=(144.0 μm162.0 μm)×100%≈88.9%\text{Percentage contribution} = \left(\frac{\Delta l}{l_f}\right) \times 100\% = \left(\frac{144.0\text{ }\mu\text{m}}{162.0\text{ }\mu\text{m}}\right) \times 100\% \approx 88.9\%

    You divided the elongation Δl\Delta l by the initial length l0=18.0 μml_0 = 18.0\text{ }\mu\text{m} rather than the final mature length lf=162.0 μml_f = 162.0\text{ }\mu\text{m}. Dividing by the initial length calculates the relative percentage increase, not the fraction of the mature cell that came from elongation.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the fold increase in cell length as 9-fold9\text{-fold}.

You correctly determined the absolute length gained from elongation as 144.0 μm144.0\text{ }\mu\text{m}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Wrong denominator in percentage contribution

You used the initial cell length in the denominator instead of the final mature length.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the percentage contribution of elongation to the final mature length (Δllf×100%\frac{\Delta l}{l_f} \times 100\%) with the relative percentage growth over the initial baseline (Δll0×100%\frac{\Delta l}{l_0} \times 100\%). Because contribution refers to a portion of the mature cell, the denominator must be the final total length (lfl_f).

REASONING PATH
Your ACEpath teacher’s suggested approach
Define the Whole
  • When calculating the contribution of a part to a final structure, the denominator must be the final total quantity (lfl_f).

  • Check whether the question asks for growth relative to the starting point (%\% increase, divided by l0l_0) or share of the completed structure (%\% contribution, divided by lfl_f).

Sanity Check Contribution Values
  • A component's percentage contribution to a total physical length cannot exceed 100%100\%.

  • If your percentage contribution is greater than 100%100\%, check immediately if you divided by the starting value instead of the total.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the formula for percentage contribution to mature length: Percentage Contribution=(Δllf)×100%\text{Percentage Contribution} = \left(\frac{\Delta l}{l_f}\right) \times 100\%.

  2. Substitute Δl=144.0 μm\Delta l = 144.0\text{ }\mu\text{m} and lf=162.0 μml_f = 162.0\text{ }\mu\text{m}: (144.0 μm162.0 μm)×100%\left(\frac{144.0\text{ }\mu\text{m}}{162.0\text{ }\mu\text{m}}\right) \times 100\%.

  3. Simplify the fraction: 144.0162.0=89≈88.89%\frac{144.0}{162.0} = \frac{8}{9} \approx 88.89\%, which rounds to 88.9%88.9\%.

Final answer

(a) 9.00-fold increase9.00\text{-fold increase}; (b) 88.9%88.9\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice distinguishing between percentage increase (denominator is initial value) and percentage contribution (denominator is final total).

  • Perform a quick bounding check on percentage contribution calculations: ensure the result lies strictly between 0%0\% and 100%100\%.

OverviewACEpath Teacher's Diagnosis

02 The student calculates the contribution of the initial cell length rather than the elongation to the final mature cell length.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Fold increase=162.0 μm18.0 μm=9-fold\text{Fold increase} = \frac{162.0\text{ }\mu\text{m}}{18.0\text{ }\mu\text{m}} = 9\text{-fold}

  2. Step 2

    Contribution=(18.0 μm162.0 μm)×100%  ⟹  Contribution=11.1%\text{Contribution} = \left(\frac{18.0\text{ }\mu\text{m}}{162.0\text{ }\mu\text{m}}\right) \times 100\% \implies \text{Contribution} = 11.1\%

    Correct

    Δl=lf−l0=162.0 μm−18.0 μm=144.0 μm  ⟹  Contribution=(144.0 μm162.0 μm)×100%≈88.9%\Delta l = l_f - l_0 = 162.0\text{ }\mu\text{m} - 18.0\text{ }\mu\text{m} = 144.0\text{ }\mu\text{m} \implies \text{Contribution} = \left(\frac{144.0\text{ }\mu\text{m}}{162.0\text{ }\mu\text{m}}\right) \times 100\% \approx 88.9\%

    You placed the initial cell length (18.0 μm18.0\text{ }\mu\text{m}) in the numerator, which yields the percentage of the mature cell that was already present prior to expansion. To find the contribution of cellular elongation, you need to use the change in length, Δl=162.0 μm−18.0 μm=144.0 μm\Delta l = 162.0\text{ }\mu\text{m} - 18.0\text{ }\mu\text{m} = 144.0\text{ }\mu\text{m}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the formula for fold increase as the ratio of final length to initial length.

You carried out the division and percentage arithmetic accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Misidentified target quantity in percentage contribution

You substituted the starting length l0l_0 directly into the numerator rather than calculating the length increase Δl=lf−l0\Delta l = l_f - l_0.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the initial baseline value with the growth increment (elongation) when computing relative contributions to a final whole.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define the target component
  • When an exercise asks for the contribution of elongation (or growth) to final size, identify whether the numerator is the baseline (l0l_0) or the elongation increment (Δl=lf−l0\Delta l = l_f - l_0).

  • Calculate the elongation increment first: Δl=lf−l0\Delta l = l_f - l_0.

Compute contribution of growth
  • Percentage Contribution of Elongation=(lf−l0lf)×100%=100%−(l0lf)×100%\text{Percentage Contribution of Elongation} = \left(\frac{l_f - l_0}{l_f}\right) \times 100\% = 100\% - \left(\frac{l_0}{l_f}\right) \times 100\%.

  • Divide the elongation increment Δl\Delta l by the final length lfl_f and multiply by 100%100\%.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the length gained by elongation: Δl=lf−l0=162.0 μm−18.0 μm=144.0 μm\Delta l = l_f - l_0 = 162.0\text{ }\mu\text{m} - 18.0\text{ }\mu\text{m} = 144.0\text{ }\mu\text{m}.

  2. Calculate the fraction of the final length contributed by this elongation: Δllf=144.0 μm162.0 μm=89\frac{\Delta l}{l_f} = \frac{144.0\text{ }\mu\text{m}}{162.0\text{ }\mu\text{m}} = \frac{8}{9}.

  3. Convert this fraction to a percentage: 89×100%≈88.89%\frac{8}{9} \times 100\% \approx 88.89\%, which rounds to 88.9%88.9\%.

Final answer

(a) 9.00-fold increase9.00\text{-fold increase}; (b) 88.9%88.9\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Check whether a requested contribution refers to the initial size or the added growth increment before setting up a fraction.

  • Verify that the sum of the initial contribution (11.1%11.1\%) and the elongation contribution (88.9%88.9\%) equals 100%100\%.

OverviewACEpath Teacher's Diagnosis

03 The student calculates net fold increase by subtracting the initial length prior to division rather than taking the total fold increase of final over initial length.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Fold increase=162.0−18.018.0  ⟹  Fold increase=144.018.0=8-fold\text{Fold increase} = \frac{162.0 - 18.0}{18.0} \implies \text{Fold increase} = \frac{144.0}{18.0} = 8\text{-fold}

    Correct

    Fold increase=lfl0=162.0 μm18.0 μm=9.00-fold\text{Fold increase} = \frac{l_f}{l_0} = \frac{162.0\text{ }\mu\text{m}}{18.0\text{ }\mu\text{m}} = 9.00\text{-fold}

    You subtracted the initial length in the numerator, which calculates the fractional change rather than the fold change. Fold increase is the direct ratio of the final value to the initial value: lfl0\frac{l_f}{l_0}.

  2. Step 2

    Elongation=162.0−18.0=144.0 μm\text{Elongation} = 162.0 - 18.0 = 144.0\text{ }\mu\text{m}

  3. Step 3

    Percentage contribution=144.0162.0∗100%=88.9%\text{Percentage contribution} = \frac{144.0}{162.0} * 100\% = 88.9\%

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the net length added during elongation as 144.0 μm144.0\text{ }\mu\text{m}.

You correctly determined that elongation accounts for 88.9%88.9\% of the final mature cell length.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Fold Change vs. Relative Change Confusion

No, this reflects a conceptual confusion between fold change and relative change.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You subtracted the initial length before dividing by l0l_0, which computes the relative or fractional growth (Δll0)(\frac{\Delta l}{l_0}) rather than the total fold increase (lfl0)(\frac{l_f}{l_0}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Fold Increase vs. Relative Increase
  • Fold Increase=FinalInitial\text{Fold Increase} = \frac{\text{Final}}{\text{Initial}}, whereas Relative Increase=Final−InitialInitial\text{Relative Increase} = \frac{\text{Final} - \text{Initial}}{\text{Initial}}.

  • Whenever a problem asks for fold increase or fold change, divide the final value directly by the initial value without subtracting first.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute the ratio of final length to initial length: Fold increase=lfl0=162.0 μm18.0 μm=9.00\text{Fold increase} = \frac{l_f}{l_0} = \frac{162.0\text{ }\mu\text{m}}{18.0\text{ }\mu\text{m}} = 9.00.

Final answer

(a) 9.00-fold increase9.00\text{-fold increase}; (b) 88.9%88.9\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice distinguishing between 'fold change' (ratio) and 'percentage increase' (change over baseline).

  • Review how cell elongation in the root apical meristem accounts for the vast majority of primary root lengthening.

Lock it in

Similar question

01

An epidermal cell in an Arabidopsis root starts with an initial length of 25.0 μm25.0\text{ }\mu\text{m} in the meristematic zone and elongates to a mature length of 200.0 μm200.0\text{ }\mu\text{m}. Calculate: (a) the fold increase in cell length, and (b) the percentage contribution of elongation to the final mature length.

Answer

(a) Fold increase=200.025.0=8.00-fold\text{Fold increase} = \frac{200.0}{25.0} = 8.00\text{-fold}. (b) Δl=200.0−25.0=175.0 μm\Delta l = 200.0 - 25.0 = 175.0\text{ }\mu\text{m}. Percentage contribution=(175.0200.0)×100%=87.5%\text{Percentage contribution} = \left(\frac{175.0}{200.0}\right) \times 100\% = 87.5\%.

02

A stem internode elongates from an initial length of 4.0 cm4.0\text{ cm} to a final length of 20.0 cm20.0\text{ cm} in response to gibberellin application. Determine: (a) the percentage increase in internode length over the initial length, and (b) the percentage of the final internode length that resulted from post-treatment elongation.

Answer

(a) Extension Δl=20.0−4.0=16.0 cm\Delta l = 20.0 - 4.0 = 16.0\text{ cm}. Percentage increase =(16.04.0)×100%=400%= \left(\frac{16.0}{4.0}\right) \times 100\% = 400\%. (b) Percentage contribution to final length =(16.020.0)×100%=80.0%= \left(\frac{16.0}{20.0}\right) \times 100\% = 80.0\%.

03

In a mutant root line with reduced expansin activity, cortical cells reach an initial length of 15.0 μm15.0\text{ }\mu\text{m} and elongate to only 75.0 μm75.0\text{ }\mu\text{m}, while wild-type cells reach 150.0 μm150.0\text{ }\mu\text{m} from the same initial size. Compare the percentage contribution of elongation to final cell length between the mutant and the wild type.

Answer

For mutant: Δlm=75.0−15.0=60.0 μm\Delta l_m = 75.0 - 15.0 = 60.0\text{ }\mu\text{m}; contribution =(60.075.0)×100%=80.0%= \left(\frac{60.0}{75.0}\right) \times 100\% = 80.0\%. For wild type: Δlwt=150.0−15.0=135.0 μm\Delta l_{wt} = 150.0 - 15.0 = 135.0\text{ }\mu\text{m}; contribution =(135.0150.0)×100%=90.0%= \left(\frac{135.0}{150.0}\right) \times 100\% = 90.0\%. Elongation contributes 80.0%80.0\% of total length in the mutant compared to 90.0%90.0\% in the wild type.

Loading workspace…