Resources

To distinguish between innate negative phototaxis and acquired maze learning in the fruit fly Drosophila melanogaster, researchers place N=400N = 400 flies into a T-maze apparatus. Arm A is illuminated at an irradiance of EA=250 μW/cm2E_A = 250\text{ }\mu\text{W/cm}^2, while Arm B is kept dark (EB=0.0 μW/cm2E_B = 0.0\text{ }\mu\text{W/cm}^2). In Trial 1 (measuring innate phototaxis), 348348 flies choose dark Arm B, and 5252 flies choose illuminated Arm A. In subsequent training, flies entering Arm B receive an electric shock of 60.0 V60.0\text{ V} paired with a synthetic odorant (octanol) at a concentration of C=1.25×10−4 MC = 1.25\times 10^{-4}\text{ M}. After 1010 associative conditioning cycles, the flies are re-tested in the presence of the odorant without shock, and 312312 flies now avoid Arm B and choose illuminated Arm A. (a) Express the irradiance of Arm A in standard SI units of W/m2\text{W/m}^2 (1 μW=10−6 W1\text{ }\mu\text{W} = 10^{-6}\text{ W}; 1 m2=104 cm21\text{ m}^2 = 10^4\text{ cm}^2). (b) Calculate the concentration of the odorant in parts per million (ppm\text{ppm}) assuming the solvent has a density of 1.00 g/mL1.00\text{ g/mL} and the molecular mass of octanol is 130.2 g/mol130.2\text{ g/mol}. (c) Calculate the shift in the proportion of the population choosing the illuminated arm from Trial 1 to the post-conditioning test.

Answer and steps

Final answer

(a) 2.50 W/m22.50\text{ W/m}^2 (derived from 250×10−6 W/cm2×104 cm2/m2=2.50 W/m2250 \times 10^{-6}\text{ W/cm}^2 \times 10^4\text{ cm}^2/\text{m}^2 = 2.50\text{ W/m}^2); (b) 16.3 ppm16.3\text{ ppm} (calculated as 1.25×10−4 mol/L×130.2 g/mol=0.016275 g/L=16.275 mg/L≈16.3 ppm1.25 \times 10^{-4}\text{ mol/L} \times 130.2\text{ g/mol} = 0.016275\text{ g/L} = 16.275\text{ mg/L} \approx 16.3\text{ ppm}); (c) An increase of +0.650+0.650 or +65.0%+65.0\% (initial proportion =52400=0.130= \frac{52}{400} = 0.130; post-conditioning proportion =312400=0.780= \frac{312}{400} = 0.780; Δp=0.780−0.130=+0.650\Delta p = 0.780 - 0.130 = +0.650).

Steps

Understanding the Biological Context

  • Innate Behavior: An instinctual, genetically hardwired response that occurs naturally without prior experience. In Trial 1, the flies exhibit negative phototaxis (moving away from light toward dark Arm B).
  • Acquired Learning (Associative Conditioning): A change in behavior resulting from experience, where an organism associates a neutral or unconditioned stimulus (such as an odorant or location) with an unconditioned stimulus (such as an electric shock). In this experiment, negative reinforcement conditions the flies to overcome their innate phototaxis and choose the illuminated arm.

Part (a): Converting Irradiance to Standard SI Units

The irradiance in Arm A is given as EA=250 μW/cm2E_A = 250\text{ }\mu\text{W/cm}^2.

  1. Convert microwatts (μW\mu\text{W}) to watts (W\text{W}): 1 μW=10−6 W1\text{ }\mu\text{W} = 10^{-6}\text{ W} 250 μW/cm2=250×10−6 W/cm2=2.50×10−4 W/cm2250\text{ }\mu\text{W/cm}^2 = 250 \times 10^{-6}\text{ W/cm}^2 = 2.50 \times 10^{-4}\text{ W/cm}^2
  2. Convert square centimeters (cm2\text{cm}^2) in the denominator to square meters (m2\text{m}^2): 1 m2=104 cm2  ⟹  1 cm−2=104 m−21\text{ m}^2 = 10^4\text{ cm}^2 \implies 1\text{ cm}^{-2} = 10^4\text{ m}^{-2} EA=(2.50×10−4 W/cm2)⋅(104 cm2/m2)=2.50 W/m2E_A = (2.50 \times 10^{-4}\text{ W/cm}^2) \cdot (10^4\text{ cm}^2/\text{m}^2) = 2.50\text{ W/m}^2

Common Pitfall: When converting area units in denominators, remember that (102 cm/m)2=104 cm2/m2(10^2\text{ cm/m})^2 = 10^4\text{ cm}^2/\text{m}^2, so multiplying W/cm2\text{W/cm}^2 by 10410^4 converts it to W/m2\text{W/m}^2.


Part (b): Calculating Concentration in Parts Per Million (ppm\text{ppm})

For dilute aqueous solutions, 1 ppm1\text{ ppm} corresponds to 1 mg1\text{ mg} of solute per 1 L1\text{ L} of solution (or 1 g1\text{ g} of solute per 106 g10^6\text{ g} of solvent):

  1. Find the mass concentration of octanol: Mass concentration=Molarity⋅Molar mass\text{Mass concentration} = \text{Molarity} \cdot \text{Molar mass} Mass concentration=(1.25×10−4 mol/L)⋅(130.2 g/mol)=0.016275 g/L\text{Mass concentration} = (1.25 \times 10^{-4}\text{ mol/L}) \cdot (130.2\text{ g/mol}) = 0.016275\text{ g/L}
  2. Convert grams per liter (g/L\text{g/L}) to milligrams per liter (mg/L\text{mg/L}): 0.016275 g/L⋅1000 mg/g=16.275 mg/L0.016275\text{ g/L} \cdot 1000\text{ mg/g} = 16.275\text{ mg/L}
  3. Since the solvent density is 1.00 g/mL=1000 g/L=106 mg/L1.00\text{ g/mL} = 1000\text{ g/L} = 10^6\text{ mg/L}: Concentration in ppm=16.275 mg/L≈16.3 ppm\text{Concentration in ppm} = 16.275\text{ mg/L} \approx 16.3\text{ ppm}

Part (c): Determining the Shift in Arm Choice Proportion

  1. Trial 1 (Innate Baseline): Out of N=400N = 400 total flies, 5252 chose the illuminated Arm A: p1=52400=0.130 (or 13.0%)p_1 = \frac{52}{400} = 0.130\text{ (or } 13.0\%)
  2. Post-Conditioning Test (Acquired Learning): Following 1010 associative conditioning cycles, 312312 flies chose the illuminated Arm A: p2=312400=0.780 (or 78.0%)p_2 = \frac{312}{400} = 0.780\text{ (or } 78.0\%)
  3. Shift in Population Proportion (Δp\Delta p): Δp=p2−p1=0.780−0.130=+0.650 (or +65.0%)\Delta p = p_2 - p_1 = 0.780 - 0.130 = +0.650\text{ (or } +65.0\%)

This substantial +65.0%+65.0\% shift demonstrates that acquired associative learning can successfully override a strong innate behavioral preference.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student inverts the area conversion factor when converting cm² to m², multiplying by 10⁻⁴ instead of dividing by it.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    250 μW=250×10−6 W  ⟹  1 cm2=10−4 m2  ⟹  EA=250×10−6×10−4 W/m2=2.5×10−8 W/m2250\text{ }\mu\text{W} = 250 \times 10^{-6}\text{ W} \implies 1\text{ cm}^2 = 10^{-4}\text{ m}^2 \implies E_A = 250 \times 10^{-6} \times 10^{-4}\text{ W/m}^2 = 2.5 \times 10^{-8}\text{ W/m}^2

    Correct

    EA=250×10−6 W10−4 m2=2.50 W/m2E_A = \frac{250 \times 10^{-6}\text{ W}}{10^{-4}\text{ m}^2} = 2.50\text{ W/m}^2

    Because cm2\text{cm}^2 is in the denominator of μW/cm2\mu\text{W/cm}^2, replacing 1 cm21\text{ cm}^2 with 10−4 m210^{-4}\text{ m}^2 requires dividing by 10−410^{-4} (or multiplying by 10410^4), rather than multiplying by 10−410^{-4}.

  2. Step 2

    Mass=1.25×10−4 mol/L×130.2 g/mol=0.01628 g/L  ⟹  Density=1000 g/L  ⟹  ppm=(0.016281000)×106=16.3 ppm\text{Mass} = 1.25 \times 10^{-4}\text{ mol/L} \times 130.2\text{ g/mol} = 0.01628\text{ g/L} \implies \text{Density} = 1000\text{ g/L} \implies \text{ppm} = \left(\frac{0.01628}{1000}\right) \times 10^6 = 16.3\text{ ppm}

  3. Step 3

    p1=52400=0.13  ⟹  p2=312400=0.78  ⟹  Shift=0.78−0.13=0.65p_1 = \frac{52}{400} = 0.13 \implies p_2 = \frac{312}{400} = 0.78 \implies \text{Shift} = 0.78 - 0.13 = 0.65

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the mass concentration and converted it to parts per million.

You computed the innate and conditioned choice proportions accurately to find the behavioral shift.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Denominator unit conversion inversion

You correctly noted that 1 cm2=10−4 m21\text{ cm}^2 = 10^{-4}\text{ m}^2, but you multiplied by 10−410^{-4} instead of substituting it into the denominator.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When converting compound units with powers in the denominator, replacing a smaller unit with a larger unit must scale the overall numerical value up, because a square meter contains 10410^4 square centimeters.

REASONING PATH
Your ACEpath teacher’s suggested approach
Compound Units with Denominator Dimensions
  • When a unit is in the denominator, such as per cm2\text{per cm}^2, multiply by the conversion factor that cancels the denominator unit: 1cm2×104 cm21 m2=104 m−2\frac{1}{\text{cm}^2} \times \frac{10^4\text{ cm}^2}{1\text{ m}^2} = 10^4\text{ m}^{-2}.

  • Write units explicitly as fractions with cancelable factors before computing the numerical powers.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the original quantity as an explicit fraction: EA=250×10−6 W1 cm2E_A = \frac{250 \times 10^{-6}\text{ W}}{1\text{ cm}^2}.

  2. Substitute 1 cm2=10−4 m21\text{ cm}^2 = 10^{-4}\text{ m}^2 directly into the denominator: EA=2.50×10−4 W10−4 m2E_A = \frac{2.50 \times 10^{-4}\text{ W}}{10^{-4}\text{ m}^2}.

  3. Simplify the powers of ten: 2.50×10−410−4=2.50\frac{2.50 \times 10^{-4}}{10^{-4}} = 2.50.

Final answer

(a) 2.50 W/m22.50\text{ W/m}^2; (b) 16.3 ppm16.3\text{ ppm}; (c) +0.650+0.650 (or +65.0%)+65.0\%)

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write compound dimensional units as explicit fractions before substituting values.

  • Check that converting a surface area density from cm−2\text{cm}^{-2} to m−2\text{m}^{-2} increases the numerical value by a factor of 10410^4.

OverviewACEpath Teacher's Diagnosis

02 The student misinterprets parts per million by multiplying the molarity directly by 10⁶ without converting moles to mass.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    EA=250×10−6 W/cm2=2.5 W/m2E_A = 250 \times 10^{-6}\text{ W/cm}^2 = 2.5\text{ W/m}^2

  2. Step 2

    ppm=C×106=1.25×10−4×106=125 ppm\text{ppm} = C \times 10^6 = 1.25 \times 10^{-4} \times 10^6 = 125\text{ ppm}

    Correct

    Mass conc.=1.25×10−4 mol/L×130.2 g/mol=0.016275 g/L=16.275 mg/L≈16.3 ppm\text{Mass conc.} = 1.25 \times 10^{-4}\text{ mol/L} \times 130.2\text{ g/mol} = 0.016275\text{ g/L} = 16.275\text{ mg/L} \approx 16.3\text{ ppm}

    Parts per million (ppm) in aqueous solution is a mass-based ratio equivalent to mg/L\text{mg/L} (or g solute/106 g solution\text{g solute} / 10^6\text{ g solution}). You multiplied molarity directly by 10610^6 without converting moles to mass using the molar mass.

  3. Step 3

    p1=52400=0.13  ⟹  p2=312400=0.78  ⟹  Shift=0.78−0.13=0.65p_1 = \frac{52}{400} = 0.13 \implies p_2 = \frac{312}{400} = 0.78 \implies \text{Shift} = 0.78 - 0.13 = 0.65

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the power and area units to express irradiance in standard SI units.

You calculated the pre- and post-conditioning population proportions accurately and found their difference.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Direct Molarity to PPM Scaling

You multiplied the molar concentration C=1.25×10−4 MC = 1.25 \times 10^{-4}\text{ M} directly by 10610^6 to get 125 ppm125\text{ ppm}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating molar concentration (moles per liter) with mass fraction (parts per million). In dilute aqueous solutions, 1 ppm=1 mg/L1\text{ ppm} = 1\text{ mg/L}. To find ppm from molarity, you must first multiply molarity by the molar mass to obtain g/L\text{g/L}, convert to mg/L\text{mg/L}, and then express it in ppm.

REASONING PATH
Your ACEpath teacher’s suggested approach
Molarity vs. Mass Concentration
  • Mass concentration (g/L)=Molarity (mol/L)×Molar mass (g/mol)\text{Mass concentration (g/L)} = \text{Molarity (mol/L)} \times \text{Molar mass (g/mol)}

  • Always multiply by molar mass before converting to mass-based ratios such as ppm or weight percent.

Aqueous Solution PPM Equivalence
  • 1 ppm=1 mg solute per 1 L solution (for density =1.00 g/mL)1\text{ ppm} = 1\text{ mg solute per } 1\text{ L solution (for density } = 1.00\text{ g/mL)}

  • Express the solute mass in milligrams per liter of solution to read the value directly in parts per million.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert molarity to mass concentration in grams per liter: Mass concentration=(1.25×10−4 mol/L)×130.2 g/mol=0.016275 g/L\text{Mass concentration} = (1.25 \times 10^{-4}\text{ mol/L}) \times 130.2\text{ g/mol} = 0.016275\text{ g/L}.

  2. Convert grams per liter to milligrams per liter: 0.016275 g/L×1000 mg/g=16.275 mg/L0.016275\text{ g/L} \times 1000\text{ mg/g} = 16.275\text{ mg/L}.

  3. Equate mg/L\text{mg/L} to ppm\text{ppm} for a dilute aqueous solution of density 1.00 g/mL1.00\text{ g/mL}: 16.275 mg/L≈16.3 ppm16.275\text{ mg/L} \approx 16.3\text{ ppm}.

Final answer

(a) 2.50 W/m22.50\text{ W/m}^2; (b) 16.3 ppm16.3\text{ ppm}; (c) +0.650+0.650 (or +65.0%)+65.0\%)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review unit dimensions for chemical concentration, noting that parts per million is dimensionless by mass, not by mole count.

  • Practice converting between molarity, mass concentration (g/L\text{g/L} or mg/L\text{mg/L}), and ppm for common biological odorants and buffers.

OverviewACEpath Teacher's Diagnosis

03 The student tracks the dark arm instead of the illuminated arm, calculating the decrease in flies choosing Arm B rather than the shift for Arm A.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    EA=250×10−6 W10−4 m2=2.5 W/m2E_A = \frac{250 \times 10^{-6}\text{ W}}{10^{-4}\text{ m}^2} = 2.5\text{ W/m}^2

  2. Step 2

    Mass=1.25×10−4×130.2=0.01628 g/L  ⟹  ppm=(0.016281000)×106=16.3 ppm\text{Mass} = 1.25 \times 10^{-4} \times 130.2 = 0.01628\text{ g/L} \implies \text{ppm} = \left(\frac{0.01628}{1000}\right) \times 10^6 = 16.3\text{ ppm}

  3. Step 3

    Initial proportion=348400=0.87  ⟹  Post-conditioning proportion=400−312400=88400=0.22  ⟹  Shift in proportion=0.22−0.87=−0.65\text{Initial proportion} = \frac{348}{400} = 0.87 \implies \text{Post-conditioning proportion} = \frac{400-312}{400} = \frac{88}{400} = 0.22 \implies \text{Shift in proportion} = 0.22 - 0.87 = -0.65

    Correct

    p1=52400=0.130  ⟹  p2=312400=0.780  ⟹  Δp=0.780−0.130=+0.650p_1 = \frac{52}{400} = 0.130 \implies p_2 = \frac{312}{400} = 0.780 \implies \Delta p = 0.780 - 0.130 = +0.650

    The question asked for the shift in the proportion of flies choosing the illuminated arm (Arm A). You calculated the proportion choosing the dark arm (Arm B), yielding a shift of −0.65-0.65 instead of +0.65+0.65.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted irradiance units from μW/cm2\mu\text{W/cm}^2 into W/m2\text{W/m}^2.

You correctly applied molar mass and density relationships to calculate concentration in parts per million.

You correctly set up the formula for behavioral shift as final proportion minus initial proportion.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Target arm misidentification

You tracked the unilluminated/shock-associated Arm B (348348 initial, 8888 post-conditioning) rather than the illuminated Arm A (5252 initial, 312312 post-conditioning).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the innate behavioral preference (negative phototaxis toward the dark arm) with the target condition specified in the question prompt (the illuminated arm).

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify the Target Condition
  • Highlight whether the question asks for the conditioned response, baseline choice, or a specific apparatus arm before calculating proportions.

  • Check which arm is specified in the prompt: Arm A (illuminated) had 5252 initial flies and 312312 post-conditioning flies.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the number of flies choosing illuminated Arm A: 5252 flies in Trial 1, and 312312 flies post-conditioning.

  2. Calculate the initial proportion: p1=52400=0.130p_1 = \frac{52}{400} = 0.130.

  3. Calculate the post-conditioning proportion: p2=312400=0.780p_2 = \frac{312}{400} = 0.780.

  4. Find the shift in proportion: Δp=p2−p1=0.780−0.130=+0.650\Delta p = p_2 - p_1 = 0.780 - 0.130 = +0.650 (or +65.0%+65.0\%).

Final answer

(a) 2.50 W/m22.50\text{ W/m}^2; (b) 16.3 ppm16.3\text{ ppm}; (c) +0.650+0.650 (or +65.0%+65.0\%)

NEXT STEPS
Final Takeaways from Your Teacher
  • Annotate the data given in the question by labeling counts explicitly as NArm AN_{\text{Arm A}} and NArm BN_{\text{Arm B}} before setting up fractions.

  • Verify that the sign of your shift makes biological sense: because learning conditioned flies to avoid Arm B, the proportion choosing Arm A must increase (Deltap>0\\Delta p > 0).

Lock it in

Similar question

01

A laboratory UV lamp delivers an irradiance of 420 μW/cm2420\text{ }\mu\text{W/cm}^2 onto a bacterial petri dish. Convert this irradiance to standard SI units of W/m2\text{W/m}^2.

Answer

4.20 W/m24.20\text{ W/m}^2. Multiply 420×10−6 W/cm2420 \times 10^{-6}\text{ W/cm}^2 by 104 cm2/m210^4\text{ cm}^2/\text{m}^2 to obtain 4.20 W/m24.20\text{ W/m}^2.

02

In a phototaxis apparatus, light intensity is measured as 1.80×10−2 mW/mm21.80\times 10^{-2}\text{ mW/mm}^2. Express this value in W/m2\text{W/m}^2 (1 mW=10−3 W1\text{ mW} = 10^{-3}\text{ W}; 1 m2=106 mm21\text{ m}^2 = 10^6\text{ mm}^2).

Answer

18.0 W/m218.0\text{ W/m}^2. Convert power: 1.80×10−2 mW=1.80×10−5 W1.80 \times 10^{-2}\text{ mW} = 1.80 \times 10^{-5}\text{ W}. Convert area in the denominator: multiply by 106 mm2/m210^6\text{ mm}^2/\text{m}^2 to get 18.0 W/m218.0\text{ W/m}^2.

03

In an olfactory conditioning trial, 500500 fruit flies are tested in a two-choice chamber. In the naive test, 410410 flies enter the unlighted control chamber while 9090 enter the illuminated chamber. Following five negative reinforcement pairings of the dark chamber with a mild shock, 365365 flies enter the illuminated chamber. Calculate the percentage point shift in the population's choice of the illuminated arm.

Answer

+55.0+55.0 percentage points. Naive proportion p1=90500=0.180p_1 = \frac{90}{500} = 0.180 (18.0%18.0\%). Conditioned proportion p2=365500=0.730p_2 = \frac{365}{500} = 0.730 (73.0%73.0\%). Shift Δp=73.0%−18.0%=+55.0%\Delta p = 73.0\% - 18.0\% = +55.0\%.

Loading workspace…