Resources

The proton-motive force (Δp\Delta p) across the inner mitochondrial membrane consists of an electrical membrane potential (Δψ=ψmatrix−ψIMS\Delta \psi = \psi_{\text{matrix}} - \psi_{\text{IMS}}) and a chemical pH gradient (ΔpH=pHmatrix−pHIMS\Delta \text{pH} = \text{pH}_{\text{matrix}} - \text{pH}_{\text{IMS}}), defined by Mitchell's chemiosmotic equation: Δp=Δψ−(2.303RTF)ΔpH\Delta p = \Delta \psi - \left(\frac{2.303 R T}{F}\right) \Delta \text{pH}. In respiring heart mitochondria at T=310 KT = 310\text{ K} (37∘C37^{\circ}\text{C}), the intermembrane space (IMS) has a pH\text{pH} of 7.057.05 while the matrix has a pH\text{pH} of 7.857.85, and the membrane potential is Δψ=−168 mV\Delta \psi = -168\text{ mV} (matrix negative relative to IMS). Using R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}) and F=96,485 C/molF = 96{,}485\text{ C/mol}, calculate the chemical component −59.5 ΔpH-59.5\,\Delta\text{pH} in mV\text{mV}, the total proton-motive force Δp\Delta p in mV\text{mV}, and the free energy change ΔG=FΔp\Delta G = F \Delta p in kJ/mol\text{kJ/mol} for moving 1 mole of H+1\text{ mole of } \text{H}^+ from the intermembrane space back into the matrix.

Answer and steps

Final answer

Chemical component = −49.2 mV-49.2\text{ mV}; Total proton-motive force Δp=−217.2 mV\Delta p = -217.2\text{ mV} (or −0.217 V-0.217\text{ V}); Free energy change for H+\text{H}^+ influx ΔG=−21.0 kJ/mol\Delta G = -21.0\text{ kJ/mol}.

Steps

01

Calculate the pH Difference (ΔpH\Delta \text{pH})

The pH difference across the inner mitochondrial membrane is defined as: ΔpH=pHmatrix−pHIMS\Delta \text{pH} = \text{pH}_{\text{matrix}} - \text{pH}_{\text{IMS}}

Given pHmatrix=7.85\text{pH}_{\text{matrix}} = 7.85 and pHIMS=7.05\text{pH}_{\text{IMS}} = 7.05: ΔpH=7.85−7.05=0.80\Delta \text{pH} = 7.85 - 7.05 = 0.80

02

Determine the Chemical Component

The temperature-dependent prefactor 2.303RTF\frac{2.303 R T}{F} at body temperature (T=310 KT = 310\text{ K}) evaluates to: 2.303RTF=2.303×8.314 J/(mol⋅K)×310 K96,485 C/mol≈0.0615 V=61.5 mV\frac{2.303 R T}{F} = \frac{2.303 \times 8.314\text{ J}/(\text{mol}\cdot\text{K}) \times 310\text{ K}}{96{,}485\text{ C/mol}} \approx 0.0615\text{ V} = 61.5\text{ mV}

(Note: While 2.303RT/F≈59.2–59.5 mV2.303 R T / F \approx 59.2\text{--}59.5\text{ mV} at standard temperature 298 K298\text{ K}, at physiological temperature 310 K310\text{ K} it is 61.5 mV61.5\text{ mV}.)

The chemical contribution to the proton-motive force is therefore: Chemical component=−61.5 mV×ΔpH=−61.5 mV×0.80=−49.2 mV\text{Chemical component} = -61.5\text{ mV} \times \Delta\text{pH} = -61.5\text{ mV} \times 0.80 = -49.2\text{ mV}

03

Calculate the Total Proton-Motive Force (Δp\Delta p)

Using Mitchell's chemiosmotic equation: Δp=Δψ−(2.303RTF)ΔpH\Delta p = \Delta \psi - \left(\frac{2.303 R T}{F}\right) \Delta \text{pH}

Substitute the electrical membrane potential Δψ=−168 mV\Delta \psi = -168\text{ mV} and the chemical component −49.2 mV-49.2\text{ mV}: Δp=−168 mV+(−49.2 mV)=−217.2 mV(or −0.2172 V)\Delta p = -168\text{ mV} + (-49.2\text{ mV}) = -217.2\text{ mV} \quad (\text{or } -0.2172\text{ V})

04

Calculate the Free Energy Change (ΔG\Delta G) for HX+\ce{H^+} Influx

The Gibbs free energy change for transferring 1 mole1\text{ mole} of protons down their electrochemical gradient from the intermembrane space into the matrix is: ΔG=FΔp\Delta G = F \Delta p

Substituting the values: ΔG=96,485 C/mol×(−0.2172 V)=−20,956.5 J/mol≈−21.0 kJ/mol\Delta G = 96{,}485\text{ C/mol} \times (-0.2172\text{ V}) = -20{,}956.5\text{ J/mol} \approx -21.0\text{ kJ/mol}

The negative value of ΔG\Delta G confirms that the movement of protons from the intermembrane space back into the matrix is thermodynamically favorable (exergonic), providing the driving force to power ATP synthesis via ATP synthase.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student subtracts pH values in the reverse order, resulting in a positive chemical component and an underestimated magnitude for Δp.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ΔpH=pHIMS−pHmatrix=7.05−7.85=−0.80\Delta\text{pH} = \text{pH}_{\text{IMS}} - \text{pH}_{\text{matrix}} = 7.05 - 7.85 = -0.80

    Correct

    ΔpH=pHmatrix−pHIMS=7.85−7.05=0.80\Delta\text{pH} = \text{pH}_{\text{matrix}} - \text{pH}_{\text{IMS}} = 7.85 - 7.05 = 0.80

    You subtracted the matrix pH from the intermembrane space pH instead of following the defined convention ΔpH=pHmatrix−pHIMS\Delta\text{pH} = \text{pH}_{\text{matrix}} - \text{pH}_{\text{IMS}}. Since the matrix has a lower [H+][\text{H}^+] (higher pH), ΔpH\Delta\text{pH} must be +0.80+0.80.

  2. Step 2

    Chemical component\text{Chemical component} = -59.5 ×\times (-0.80) = 47.6 mV\text{ mV}

    Correct

    Chemical component\text{Chemical component} = -61.5 mV\text{ mV} ×\times 0.80 = -49.2 mV\text{ mV}

    Your negative ΔpH\Delta\text{pH} caused the chemical component to become positive (+47.6 mV+47.6\text{ mV}). In addition, evaluating 2.303RTF\frac{2.303 R T}{F} at body temperature (T=310 KT = 310\text{ K}) yields 61.5 mV61.5\text{ mV}, giving −61.5 mV×0.80=−49.2 mV-61.5\text{ mV} \times 0.80 = -49.2\text{ mV}.

  3. Step 3

    Δp=−168 mV+47.6 mV=−120.4 mV\Delta p = -168\text{ mV} + 47.6\text{ mV} = -120.4\text{ mV}

    Correct

    Δp=−168 mV+(−49.2 mV)=−217.2 mV\Delta p = -168\text{ mV} + (-49.2\text{ mV}) = -217.2\text{ mV}

    Because your chemical component was positive, it subtracted from the electrical potential rather than reinforcing it. Both gradients push protons into the matrix, so their potentials must add together in magnitude.

  4. Step 4

    ΔG=96485 C/mol×(−0.1204 V)=−11617 J/mol=−11.6 kJ/mol\Delta G = 96485\text{ C/mol} \times (-0.1204\text{ V}) = -11617\text{ J/mol} = -11.6\text{ kJ/mol}

    Correct

    ΔG=96485 C/mol×(−0.2172 V)=−20956.5 J/mol≈−21.0 kJ/mol\Delta G = 96485\text{ C/mol} \times (-0.2172\text{ V}) = -20956.5\text{ J/mol} \approx -21.0\text{ kJ/mol}

    You carried out the conversion to ΔG\Delta G correctly using Faraday's constant, but the underestimated magnitude of Δp\Delta p halved your calculated free energy change.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized the relationship ΔG=FΔp\Delta G = F \Delta p and converted units accurately between millivolts and joules/kilojoules.

You correctly combined the electrical membrane potential with the chemical component in Mitchell's equation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign Error in pH Gradient Convention

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You subtracted the matrix pH from the IMS pH instead of following the chemiosmotic convention ΔpH=pHmatrix−pHIMS\Delta\text{pH} = \text{pH}_{\text{matrix}} - \text{pH}_{\text{IMS}}. This reversed the sign of the concentration gradient and made it appear as though the pH difference opposes proton influx rather than driving it.

REASONING PATH
Your ACEpath teacher’s suggested approach
Thermodynamic Sanity Check for Proton Influx
  • In respiring mitochondria, the matrix is both negative (electrical pull) and alkaline (chemical pull). Both components must favor proton influx into the matrix.

  • Verify that the chemical component −(2.303RTF)ΔpH-\left(\frac{2.303 R T}{F}\right)\Delta\text{pH} has the same negative sign as Δψ\Delta\psi so that their magnitudes reinforce each other.

Physiological Temperature Prefactor
  • At standard temperature (298 K298\text{ K}), 2.303RT/F≈59.2–59.5 mV2.303 R T / F \approx 59.2\text{--}59.5\text{ mV}, but at physiological body temperature (310 K310\text{ K}), 2.303RT/F=61.5 mV2.303 R T / F = 61.5\text{ mV}.

  • Always compute or confirm the temperature-specific factor 2.303RTF\frac{2.303 R T}{F} using the given temperature before evaluating the chemical term.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the correct pH difference: ΔpH=pHmatrix−pHIMS=7.85−7.05=+0.80\Delta\text{pH} = \text{pH}_{\text{matrix}} - \text{pH}_{\text{IMS}} = 7.85 - 7.05 = +0.80.

  2. Calculate the chemical component at 310 K310\text{ K}: −(2.303×8.314×31096485)×0.80=−61.5 mV×0.80=−49.2 mV-\left(\frac{2.303 \times 8.314 \times 310}{96485}\right) \times 0.80 = -61.5\text{ mV} \times 0.80 = -49.2\text{ mV}.

  3. Sum the electrical and chemical terms to find total proton-motive force: Δp=Δψ+(chemical component)=−168 mV+(−49.2 mV)=−217.2 mV=−0.2172 V\Delta p = \Delta\psi + (\text{chemical component}) = -168\text{ mV} + (-49.2\text{ mV}) = -217.2\text{ mV} = -0.2172\text{ V}.

  4. Calculate the Gibbs free energy change: ΔG=FΔp=96485 C/mol×(−0.2172 V)=−20956.5 J/mol≈−21.0 kJ/mol\Delta G = F \Delta p = 96485\text{ C/mol} \times (-0.2172\text{ V}) = -20956.5\text{ J/mol} \approx -21.0\text{ kJ/mol}.

Final answer

Chemical component = −49.2 mV-49.2\text{ mV}; Δp=−217.2 mV\Delta p = -217.2\text{ mV}; ΔG=−21.0 kJ/mol\Delta G = -21.0\text{ kJ/mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the directional conventions used in Mitchell's chemiosmotic hypothesis ({inside}−{outside}\{\text{inside}\} - \{\text{outside}\}).

  • Practice double-checking whether physical gradients reinforce or oppose each other before finalizing the arithmetic signs.

OverviewACEpath Teacher's Diagnosis

02 The student adds rather than subtracts the chemical gradient term in Mitchell's equation, leading to an incorrect proton-motive force.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ΔpH=7.85−7.05=0.80\Delta\text{pH} = 7.85 - 7.05 = 0.80

  2. Step 2

    Chemical component=−59.5×0.80=−47.6 mV\text{Chemical component} = -59.5 \times 0.80 = -47.6\text{ mV}

    Correct

    Chemical component=−(2.303RTF)ΔpH=−61.5 mV×0.80=−49.2 mV\text{Chemical component} = -\left(\frac{2.303 R T}{F}\right)\Delta\text{pH} = -61.5\text{ mV} \times 0.80 = -49.2\text{ mV}

    At physiological temperature (T=310 KT = 310\text{ K}), the Nernst prefactor 2.303RTF\frac{2.303 R T}{F} evaluates to 61.5 mV61.5\text{ mV} rather than the standard 298 K298\text{ K} value of 59.2–59.5 mV59.2\text{--}59.5\text{ mV}.

  3. Step 3

    Δp=Δψ−(−59.5ΔpH)=−120.4 mV\Delta p = \Delta \psi - (-59.5 \Delta\text{pH}) = -120.4\text{ mV}

    Correct

    Δp=Δψ−(2.303RTF)ΔpH=−168 mV+(−49.2 mV)=−217.2 mV\Delta p = \Delta \psi - \left(\frac{2.303 R T}{F}\right)\Delta\text{pH} = -168\text{ mV} + (-49.2\text{ mV}) = -217.2\text{ mV}

    You inserted an extra minus sign, treating the formula as Δψ−(−… )\Delta \psi - (-\dots), which added +47.6 mV+47.6\text{ mV} to Δψ\Delta \psi instead of adding the negative chemical component (−49.2 mV-49.2\text{ mV}). In active mitochondria, both the negative matrix potential and the higher matrix pH drive protons inward in the same direction.

  4. Step 4

    ΔG=96485 C/mol×(−0.1204 V)=−11617 J/mol=−11.6 kJ/mol\Delta G = 96485\text{ C/mol} \times (-0.1204\text{ V}) = -11617\text{ J/mol} = -11.6\text{ kJ/mol}

    Correct

    ΔG=FΔp=96,485 C/mol×(−0.2172 V)=−20,956.5 J/mol≈−21.0 kJ/mol\Delta G = F \Delta p = 96{,}485\text{ C/mol} \times (-0.2172\text{ V}) = -20{,}956.5\text{ J/mol} \approx -21.0\text{ kJ/mol}

    Your formula ΔG=FΔp\Delta G = F \Delta p and unit conversion were executed properly, but the numerical result is off due to the error in Δp\Delta p.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the pH gradient across the membrane.

You correctly related the proton-motive force to Gibbs free energy using ΔG=FΔp\Delta G = F \Delta p.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error in chemiosmotic equation

You accidentally double-negated the chemical gradient term, causing the chemical component to oppose the electrical potential.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the explicit negative sign in Mitchell's equation Δp=Δψ−(2.303RT/F)ΔpH\Delta p = \Delta \psi - (2.303 R T / F)\Delta\text{pH} with an already-evaluated negative term, leading to an unintended subtraction of a negative value.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Physiological Synergy
  • Both electrical potential (extmatrixnegative ext{matrix negative}) and chemical pH gradient (extmatrixalkaline ext{matrix alkaline}) must pull protons in the same direction into the matrix.

  • Ensure that both terms have the same sign (negative for inward driving force) when summing them into Δp\Delta p.

Temperature Dependence of the Nernst Slope
  • The prefactor 2.303RTF\frac{2.303 R T}{F} changes with temperature: 59.2 mV59.2\text{ mV} at 298 K298\text{ K} (25∘C25^\circ\text{C}), but 61.5 mV61.5\text{ mV} at 310 K310\text{ K} (37∘C37^\circ\text{C}).

  • Calculate 2.303RTF\frac{2.303 R T}{F} using the given temperature T=310 KT = 310\text{ K} before multiplying by ΔpH\Delta\text{pH}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the chemical component at 310 K310\text{ K}: −61.5 mV×0.80=−49.2 mV-61.5\text{ mV} \times 0.80 = -49.2\text{ mV}.

  2. Sum both inward forces in Mitchell's equation: Δp=−168 mV+(−49.2 mV)=−217.2 mV=−0.2172 V\Delta p = -168\text{ mV} + (-49.2\text{ mV}) = -217.2\text{ mV} = -0.2172\text{ V}.

  3. Calculate free energy: ΔG=(96,485 C/mol)×(−0.2172 V)=−20,957 J/mol≈−21.0 kJ/mol\Delta G = (96{,}485\text{ C/mol}) \times (-0.2172\text{ V}) = -20{,}957\text{ J/mol} \approx -21.0\text{ kJ/mol}.

Final answer

Chemical component = −49.2 mV-49.2\text{ mV}; Total Δp=−217.2 mV\Delta p = -217.2\text{ mV}; ΔG=−21.0 kJ/mol\Delta G = -21.0\text{ kJ/mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review Mitchell's chemiosmotic hypothesis and verify that the electrical and chemical forces reinforce each other in energized mitochondria.

  • Practice using temperature-adjusted Nernst prefactors (61.5 mV61.5\text{ mV} at 37∘C37^\circ\text{C}) instead of room-temperature defaults.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to convert millivolts to volts when calculating free energy, resulting in a value off by a factor of 1000.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ΔpH=7.85−7.05=0.80\Delta\text{pH} = 7.85 - 7.05 = 0.80

  2. Step 2

    Chemical component=−59.5×0.80=−47.6 mV\text{Chemical component} = -59.5 \times 0.80 = -47.6\text{ mV}

  3. Step 3

    Δp=−168 mV−47.6 mV=−215.6 mV\Delta p = -168\text{ mV} - 47.6\text{ mV} = -215.6\text{ mV}

  4. Step 4

    ΔG=96485 C/mol×(−215.6)=−20802166 J/mol⟹ΔG=−20802 kJ/mol\Delta G = 96485\text{ C/mol} \times (-215.6) = -20802166\text{ J/mol} \Longrightarrow \Delta G = -20802\text{ kJ/mol}

    Correct

    ΔG=FΔp=96,485 C/mol×(−0.2172 V)≈−20,957 J/mol≈−21.0 kJ/mol\Delta G = F \Delta p = 96{,}485\text{ C/mol} \times (-0.2172\text{ V}) \approx -20{,}957\text{ J/mol} \approx -21.0\text{ kJ/mol}

    You substituted Δp\Delta p in millivolts instead of converting it to volts. Because 1 V=1 J/C1\text{ V} = 1\text{ J/C}, multiplying coulombs by millivolts produces millijoules (mJ\text{mJ}), not joules (J\text{J}). Substituting −0.2156 V-0.2156\text{ V} yields −20,802 J/mol≈−20.8 kJ/mol-20{,}802\text{ J/mol} \approx -20.8\text{ kJ/mol} (or −21.0 kJ/mol-21.0\text{ kJ/mol} using the exact 310 K310\text{ K} prefactor).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the pH gradient ΔpH\Delta\text{pH} across the inner mitochondrial membrane.

You properly recognized that both the electrical potential and the chemical gradient contribute additively with negative signs to drive proton influx into the matrix.

You set up the correct thermodynamic relationship ΔG=FΔp\Delta G = F \Delta p relating proton-motive force to Gibbs free energy.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit conversion omission (millivolts to volts)

You treated millivolts as standard SI volts when multiplying by Faraday's constant, forgetting that Faraday's constant requires potential in volts to yield joules.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking that the volt is the base derived SI unit (1 V=1 J/C1\text{ V} = 1\text{ J/C}). When electrical potential is expressed in millivolts (mV\text{mV}), directly multiplying by F=96,485 C/molF = 96{,}485\text{ C/mol} results in millijoules per mole (mJ/mol\text{mJ/mol}), making the unadjusted calculation 1,0001{,}000 times too large.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Alignment for $\Delta G = n F \Delta E$
  • 1 J=1 C×1 V1\text{ J} = 1\text{ C} \times 1\text{ V}, so electrical potentials must always be in volts (V\text{V}), where 1 mV=10−3 V1\text{ mV} = 10^{-3}\text{ V}.

  • Before multiplying by Faraday's constant FF, always divide millivolts by 1,0001{,}000 to express the membrane potential or proton-motive force in volts.

Physiological Magnitude Check
  • The free energy of ATP synthesis under cellular conditions is roughly +50 kJ/mol+50\text{ kJ/mol}, and moving 1 mol of HX+1\text{ mol of } \ce{H+} across the inner mitochondrial membrane typically releases −19 to −22 kJ/mol-19\text{ to } -22\text{ kJ/mol}.

  • Check your calculated ΔG\Delta G against expected biological scales; a value in the tens of thousands of kJ/mol\text{kJ/mol} indicates a missing 10−310^{-3} factor.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the proton-motive force from millivolts to volts: Δp=−217.2 mV×1 V1,000 mV=−0.2172 V\Delta p = -217.2\text{ mV} \times \frac{1\text{ V}}{1{,}000\text{ mV}} = -0.2172\text{ V}.

  2. Calculate the molar Gibbs free energy change: ΔG=FΔp=(96,485 C/mol)×(−0.2172 V)=−20,956.5 J/mol\Delta G = F \Delta p = (96{,}485\text{ C/mol}) \times (-0.2172\text{ V}) = -20{,}956.5\text{ J/mol}.

  3. Convert joules to kilojoules: ΔG=−20,956.5 J/mol1,000 J/kJ≈−21.0 kJ/mol\Delta G = \frac{-20{,}956.5\text{ J/mol}}{1{,}000\text{ J/kJ}} \approx -21.0\text{ kJ/mol} (or −20.8 kJ/mol-20.8\text{ kJ/mol} using −0.2156 V-0.2156\text{ V}).

Final answer

Chemical component=−49.2 mV\text{Chemical component} = -49.2\text{ mV}, Δp=−217.2 mV\Delta p = -217.2\text{ mV}, and ΔG=−21.0 kJ/mol\Delta G = -21.0\text{ kJ/mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out explicit unit cancellations (e.g., (C/mol)×V=J/mol(\text{C/mol}) \times \text{V} = \text{J/mol}) when calculating thermodynamic potentials.

  • Practice converting between mV\text{mV} and V\text{V} routinely whenever working with electrochemical equations such as the Nernst equation or Mitchell's chemiosmotic formula.

  • Use biological benchmarks (such as ≈−21 kJ/mol\approx -21\text{ kJ/mol} per mole of protons translocated) to sanity-check your final numerical answers.

Lock it in

Similar question

01

In a cell suspension at T=298 KT = 298\text{ K} (2.303RT/F=59.2 mV2.303RT/F = 59.2\text{ mV}), mitochondria maintain pHIMS=7.10\text{pH}_{\text{IMS}} = 7.10, pHmatrix=7.70\text{pH}_{\text{matrix}} = 7.70, and Δψ=−140 mV\Delta\psi = -140\text{ mV}. Calculate ΔpH\Delta\text{pH}, the chemical component of the proton-motive force in mV\text{mV}, and the total proton-motive force Δp\Delta p in mV\text{mV}.

Answer

ΔpH=7.70−7.10=+0.60\Delta\text{pH} = 7.70 - 7.10 = +0.60. Chemical component =−59.2 mV×0.60=−35.5 mV= -59.2\text{ mV} \times 0.60 = -35.5\text{ mV}. Total Δp=−140 mV+(−35.5 mV)=−175.5 mV\Delta p = -140\text{ mV} + (-35.5\text{ mV}) = -175.5\text{ mV}.

02

Mitochondria in brown adipose tissue are actively uncoupled, reducing Δψ\Delta\psi to −80 mV-80\text{ mV} while maintaining a matrix pH of 7.657.65 and an IMS pH of 7.157.15 at T=310 KT = 310\text{ K} (2.303RT/F=61.5 mV2.303RT/F = 61.5\text{ mV}). Calculate Δp\Delta p in mV\text{mV} and determine the free energy change ΔG\Delta G in kJ/mol\text{kJ/mol} for the transfer of 1 mol of H+1\text{ mol of } \text{H}^+ into the matrix (F=96,485 C/molF = 96{,}485\text{ C/mol}).

Answer

ΔpH=7.65−7.15=+0.50\Delta\text{pH} = 7.65 - 7.15 = +0.50. Chemical component =−61.5 mV×0.50=−30.75 mV= -61.5\text{ mV} \times 0.50 = -30.75\text{ mV}. Δp=−80 mV+(−30.75 mV)=−110.75 mV=−0.11075 V\Delta p = -80\text{ mV} + (-30.75\text{ mV}) = -110.75\text{ mV} = -0.11075\text{ V}. ΔG=96485 C/mol×(−0.11075 V)=−10686 J/mol≈−10.7 kJ/mol\Delta G = 96485\text{ C/mol} \times (-0.11075\text{ V}) = -10686\text{ J/mol} \approx -10.7\text{ kJ/mol}.

03

An isolated mitochondrial preparation has Δψ=−160 mV\Delta\psi = -160\text{ mV} at 310 K310\text{ K} (2.303RT/F=61.5 mV2.303RT/F = 61.5\text{ mV}). What minimum matrix pH is required to achieve a total proton-motive force magnitude of at least ∣Δp∣≥220 mV|\Delta p| \ge 220\text{ mV} if the intermembrane space pH is fixed at 7.007.00?

Answer

To reach Δp≤−220 mV\Delta p \le -220\text{ mV}, the chemical component must satisfy −61.5 ΔpH≤−60 mV-61.5\,\Delta\text{pH} \le -60\text{ mV}, so ΔpH≥6061.5≈0.976\Delta\text{pH} \ge \frac{60}{61.5} \approx 0.976. Thus pHmatrix−7.00≥0.976\text{pH}_{\text{matrix}} - 7.00 \ge 0.976, which gives pHmatrix≥7.98\text{pH}_{\text{matrix}} \ge 7.98.

Loading workspace…