Resources

An ecology student sets up five identical 500 mL500\text{ mL} culture flasks containing nutrient broth inoculated with Paramecium aurelia. Over 18 days18\text{ days}, cell counts are monitored daily via spectrophotometric optical density calibrated against hemocytometer counts. Between Day 12 and Day 18, the cell density reaches a stable plateau. The recorded mean densities over the final six sampling points are: 782 cells/mL782\text{ cells/mL}, 815 cells/mL815\text{ cells/mL}, 794 cells/mL794\text{ cells/mL}, 808 cells/mL808\text{ cells/mL}, 798 cells/mL798\text{ cells/mL}, and 803 cells/mL803\text{ cells/mL}. (a) Based on these empirical laboratory titration/assay data, calculate the experimental carrying capacity density (KdensityK_{\text{density}}) in cells/mL\text{cells/mL} as the mean of the plateau phase (to 3 significant figures). (b) Calculate the total environmental carrying capacity (KK) of an entire 500 mL500\text{ mL} culture flask.

Answer and steps

Final answer

(a) Kdensity=800 cells/mLK_{\text{density}} = 800\text{ cells/mL}; (b) K=4.00×105 cellsK = 4.00\times 10^5\text{ cells}

Steps

Part (a): Determining the Carrying Capacity Density (KdensityK_{\text{density}})

In population ecology, a population following logistic growth stabilizes around an asymptote known as the carrying capacity (KK), representing the maximum population size or density that the environment's resources can sustainably support.

When a population reaches the plateau (stationary) phase, fluctuations around the carrying capacity occur due to minor variations in death and birth rates. The experimental carrying capacity density is estimated by taking the arithmetic mean of the recorded densities across the plateau:

xˉ=∑xin\bar{x} = \frac{\sum x_i}{n}

  1. Sum the recorded plateau densities: ∑xi=782+815+794+808+798+803=4800 cells/mL\sum x_i = 782 + 815 + 794 + 808 + 798 + 803 = 4800\text{ cells/mL}
  2. Divide by the number of sampling days (n=6n = 6): Kdensity=4800 cells/mL6=800 cells/mLK_{\text{density}} = \frac{4800\text{ cells/mL}}{6} = 800\text{ cells/mL}

To three significant figures, the carrying capacity density is: Kdensity=800 cells/mLK_{\text{density}} = 800\text{ cells/mL}


Part (b): Calculating the Total Carrying Capacity (KK) for the Entire Flask

The carrying capacity density represents the population per unit volume. To find the total carrying capacity (KK) of an entire culture flask, multiply the carrying capacity density by the total culture volume (V=500 mLV = 500\text{ mL}):

K=Kdensity×VK = K_{\text{density}} \times V

K=800 cells/mL×500 mL=400,000 cellsK = 800\text{ cells/mL} \times 500\text{ mL} = 400{,}000\text{ cells}

Expressing the result to three significant figures in scientific notation: K=4.00×105 cellsK = 4.00 \times 10^5\text{ cells}

Common Pitfall: Confusing population density (individuals per unit volume or area, such as cells/mL\text{cells/mL}) with total population size (total individual count). Always verify whether a carrying capacity question asks for density or total abundance.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses population density with total population size and reports the density as the total carrying capacity of the flask without multiplying by the volume.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    782+815+794+808+798+8036=48006  ⟹  Kdensity=800 cells/mL\frac{782 + 815 + 794 + 808 + 798 + 803}{6} = \frac{4800}{6} \implies K_{\text{density}} = 800\text{ cells/mL}

  2. Step 2

    K=800 cellsK = 800\text{ cells}

    Correct

    K=Kdensity×V=800 cells/mL×500 mL=4.00×105 cellsK = K_{\text{density}} \times V = 800\text{ cells/mL} \times 500\text{ mL} = 4.00 \times 10^5\text{ cells}

    You replaced cells/mL\text{cells/mL} with cells\text{cells} without scaling by the total volume. Total carrying capacity requires multiplying the population density by the total volume of the culture (500 mL500\text{ mL}).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the stationary plateau phase as the basis for carrying capacity density.

You accurately calculated the arithmetic mean of the six sampled densities to obtain 800 cells/mL800\text{ cells/mL}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Density vs. Total Abundance Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated population density (organisms per unit volume, cells/mL\text{cells/mL}) with total population size (total individual count across the entire habitat volume).

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the Dimensional Units
  • Total Population (NN) = Population Density (count/unit volume\text{count/unit volume}) ×\times Total Volume (VV).

  • Always cancel units: multiplying cells/mL\text{cells/mL} by mL\text{mL} yields total cells\text{cells}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the total flask volume: V=500 mLV = 500\text{ mL}.

  2. Multiply density by volume: K=800 cells/mL×500 mL=400,000 cellsK = 800\text{ cells/mL} \times 500\text{ mL} = 400{,}000\text{ cells}.

  3. Express the final answer in scientific notation: 4.00×105 cells4.00 \times 10^5\text{ cells}.

Final answer

K=4.00×105 cellsK = 4.00 \times 10^5\text{ cells}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between intensive ecological properties (such as density) and extensive properties (total population size).

  • Practice tracking physical units through dimensional analysis in every population ecology calculation.

OverviewACEpath Teacher's Diagnosis

02 The student divides the density by the volume instead of multiplying it to find the total carrying capacity, resulting in 1.6 cells.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Kdensity=782+815+794+808+798+8036  ⟹  Kdensity=800 cells/mLK_{\text{density}} = \frac{782 + 815 + 794 + 808 + 798 + 803}{6} \implies K_{\text{density}} = 800\text{ cells/mL}

  2. Step 2

    K=800500  ⟹  K=1.6 cellsK = \frac{800}{500} \implies K = 1.6\text{ cells}

    Correct

    K=Kdensity×V=800 cells/mL×500 mL=4.00×105 cellsK = K_{\text{density}} \times V = 800\text{ cells/mL} \times 500\text{ mL} = 4.00 \times 10^5\text{ cells}

    To find the total carrying capacity, you need to multiply the density by the volume (K=Kdensity×VK = K_{\text{density}} \times V), not divide. Dividing by volume yields cells/mLmL=cells/mL2\frac{\text{cells/mL}}{\text{mL}} = \text{cells/mL}^2 rather than total cells.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the plateau phase and calculated the arithmetic mean of the six data points.

You stated the correct carrying capacity density with its appropriate unit of cells/mL\text{cells/mL}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Dimensional Analysis / Formula Inversion

You set up a division densityvolume\frac{\text{density}}{\text{volume}} rather than a multiplication density×volume\text{density} \times \text{volume}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused population density (a rate per unit volume) with total population abundance, leading to an inverted operation that ignored dimensional unit cancellation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Unit Cancellation
  • Total Quantity = Density ×\times Volume

  • Always track units: (cells/mL)×mL=cells(\text{cells}/\text{mL}) \times \text{mL} = \text{cells}.

Biological Sanity Check
  • Total count must exceed or equal density per unit volume for volumes >1> 1

  • If each 1 mL1\text{ mL} has 800800 cells, a 500 mL500\text{ mL} flask must contain vastly more than 800800 cells, never fewer.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the relationship between density, volume, and total population: K=Kdensity×VK = K_{\text{density}} \times V.

  2. Substitute the known values with units: K=800 cells/mL×500 mLK = 800\text{ cells/mL} \times 500\text{ mL}.

  3. Multiply and express in scientific notation to 3 significant figures: 400,000 cells=4.00×105 cells400{,}000\text{ cells} = 4.00 \times 10^5\text{ cells}.

Final answer

(a) Kdensity=800 cells/mLK_{\text{density}} = 800\text{ cells/mL}; (b) K=4.00×105 cellsK = 4.00 \times 10^5\text{ cells}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out physical units explicitly in every step to verify that denominator units cancel properly.

  • Perform a quick order-of-magnitude reality check on your final numbers to ensure the total population scale is biologically reasonable.

OverviewACEpath Teacher's Diagnosis

03 The student multiplies by five flasks when asked for the carrying capacity of an entire 500 mL flask, giving the combined total across all five experimental replicates instead.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Mean=48006  ⟹  Kdensity=800 cells/mL\text{Mean} = \frac{4800}{6} \implies K_{\text{density}} = 800\text{ cells/mL}

  2. Step 2

    K=800 cells/mL×500 mL×5  ⟹  K=2000000 cellsK = 800\text{ cells/mL} \times 500\text{ mL} \times 5 \implies K = 2000000\text{ cells}

    Correct

    K=800 cells/mL×500 mL=4.00×105 cellsK = 800\text{ cells/mL} \times 500\text{ mL} = 4.00 \times 10^5\text{ cells}

    The question asked for the carrying capacity of an entire 500 mL500\text{ mL} culture flask (a single replicate), but you multiplied by 55, which yielded the sum of all five experimental flasks.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the arithmetic mean of the plateau densities.

You correctly identified that total population equals carrying capacity density multiplied by volume.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing replicate count with habitat volume

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You included the experimental replicate count (55 flasks) into the carrying capacity calculation, confusing the combined organism count of the entire laboratory trial with the environmental carrying capacity of a single discrete habitat (11 flask).

REASONING PATH
Your ACEpath teacher’s suggested approach
Target Habitat Boundary
  • In population ecology, carrying capacity KK is defined for a specific, defined ecological unit or habitat (such as one flask), independent of how many replicate treatments are set up in the experiment.

  • Identify the exact system boundary specified by the prompt—here, 'an entire 500 mL500\text{ mL} culture flask'—and multiply KdensityK_{\text{density}} only by the volume of that single habitat.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the target habitat volume: V=500 mLV = 500\text{ mL} for a single flask.

  2. Multiply the plateau density by this single flask volume: K=800 cells/mL×500 mL=400,000 cellsK = 800\text{ cells/mL} \times 500\text{ mL} = 400{,}000\text{ cells}.

  3. Express the final carrying capacity to three significant figures: 4.00×105 cells4.00 \times 10^5\text{ cells}.

Final answer

K=4.00×105 cellsK = 4.00 \times 10^5\text{ cells}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always re-read the target unit in ecological word problems to distinguish between a single replicate habitat and the total number of experimental trials.

  • Practice writing final answers in standard scientific notation with appropriate units when working with large population counts.

Lock it in

Similar question

01

A limnologist measures Daphnia magna density in five 2 L2\text{ L} mesocosms at equilibrium. The recorded densities are 4545, 5252, 4848, 5555, and 50 individuals/L50\text{ individuals/L}. Determine (a) the mean carrying capacity density (KdensityK_{\text{density}}) and (b) the total carrying capacity (KK) per mesocosm.

Answer

(a) Kdensity=45+52+48+55+505=50 individuals/LK_{\text{density}} = \frac{45+52+48+55+50}{5} = 50\text{ individuals/L}. (b) Total carrying capacity K=50 individuals/L×2 L=100 individualsK = 50\text{ individuals/L} \times 2\text{ L} = 100\text{ individuals}.

02

An automated bioreactor maintains a 4.5 L4.5\text{ L} continuous microalgae culture. At steady state, daily hemocytometer readings over 4 days show 1.8×1061.8 \times 10^6, 2.1×1062.1 \times 10^6, 2.0×1062.0 \times 10^6, and 2.1×106 cells/mL2.1 \times 10^6\text{ cells/mL}. Calculate the total carrying capacity (KK) of the entire bioreactor to two significant figures in scientific notation.

Answer

Mean density Kdensity=1.8+2.1+2.0+2.14×106=2.0×106 cells/mLK_{\text{density}} = \frac{1.8+2.1+2.0+2.1}{4} \times 10^6 = 2.0 \times 10^6\text{ cells/mL}. Convert volume to milliliters: V=4.5 L=4500 mLV = 4.5\text{ L} = 4500\text{ mL}. Total carrying capacity K=2.0×106 cells/mL×4500 mL=9.0×109 cellsK = 2.0 \times 10^6\text{ cells/mL} \times 4500\text{ mL} = 9.0 \times 10^9\text{ cells}.

03

A marine ecologist studies barnacle settlement on rocky intertidal quadrats. Across six 0.25 m20.25\text{ m}^2 quadrats at maximum seasonal plateau, counts average 320 barnacles320\text{ barnacles} per quadrat. Calculate (a) the carrying capacity density per square meter (K/m2K/\text{m}^2) and (b) the total carrying capacity of a continuous 18 m218\text{ m}^2 reef bench.

Answer

(a) Density per unit area = 320 barnacles0.25 m2=1280 barnacles/m2\frac{320\text{ barnacles}}{0.25\text{ m}^2} = 1280\text{ barnacles/m}^2. (b) Total carrying capacity K=1280 barnacles/m2×18 m2=23,040 barnaclesK = 1280\text{ barnacles/m}^2 \times 18\text{ m}^2 = 23{,}040\text{ barnacles} (or 2.3×104 barnacles2.3 \times 10^4\text{ barnacles} to two significant figures).

Loading workspace…