Resources
A mature parenchymal cell has reached full osmotic equilibrium () inside an open bath containing a sodium chloride () solution. The external bath has a solute concentration of at (, ). Inside the cell, internal biochemical analysis reveals a cytoplasmic solute potential of . Assuming negligible change in cell volume, calculate the internal turgor pressure (pressure potential ) exerted against the plant cell wall at equilibrium. Express your answer in rounded to three significant figures.
Answer and steps
Final answer
Steps
Calculate the Water Potential of the External Solution ()
Understanding the Water Potential Framework
In plant biology, water movement across a selectively permeable membrane is governed by the total water potential (), defined as the sum of the solute potential () and the pressure potential (): At full osmotic equilibrium between a plant cell and an external medium, water ceases net movement because the water potential inside the cell equals the water potential of the surrounding solution:
Because the external bath is open to the atmosphere, its pressure potential is zero:
The solute potential of an aqueous solution is given by the van 't Hoff equation:
Convert the temperature to Kelvin:
Substitute the given values into the equation:
- Ionization constant,
- Molar concentration,
- Universal gas constant,
- Absolute temperature,
Therefore, the total external water potential is:
Determine the Internal Turgor Pressure ()
At osmotic equilibrium:
Express the cell's water potential in terms of its internal components:
Substitute the given cytoplasmic solute potential ():
Rearrange to solve for the pressure potential (turgor pressure):
Common Pitfalls to Avoid
- Omitting the Negative Sign: The solute potential () is always negative for a solution compared to pure water (). Forgetting the negative sign leads to an incorrect total water potential.
- Temperature Units: Always convert temperature to the absolute scale (); using directly will lead to incorrect values by an order of magnitude.
- Atmospheric Pressure: An open beaker or bath has a gauge pressure of , whereas a closed, pressurized plant cell typically maintains a positive turgor pressure ().
Typical errors
01 The student forgets the negative sign in the solute potential formula (Ψs = -iCRT), yielding a positive external water potential and an erroneous turgor pressure of 1.25 MPa.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You omitted the required negative sign in the van 't Hoff solute potential formula. Adding solutes always lowers water potential below that of pure water (), so solute potential is always negative or zero.
- Step 3Correct
Your conceptual reasoning that an open bath has and that at equilibrium is correct, but the value is affected by the missing negative sign in Step 2.
- Step 4Correct
You correctly rearranged the relationship to solve for , but substituting the positive external potential yielded an incorrect final answer of instead of .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted the ambient temperature from degrees Celsius to Kelvin.
You recognized that the external solution in an open container has zero pressure potential ().
You correctly applied the condition of full osmotic equilibrium, setting .
You correctly rearranged the total water potential equation to solve for turgor pressure as .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou omitted the leading negative sign in the van 't Hoff formula , writing instead.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisSolute potential represents the reduction in free energy of water molecules caused by dissolved solute particles. Because pure water at atmospheric pressure is defined as , dissolving solutes always makes the solute potential strictly negative (). Omitting the negative sign treats dissolved solute as if it raises water potential above pure water.
REASONING PATH
Your ACEpath teacher’s suggested approach- Solute Potential Sign Rule
is always negative for any aqueous solution with dissolved solutes.
Check that any calculated has a negative value before plugging it into .
- Open Container Pressure Potential
An open beaker or bath has gauge pressure , so .
Confirm that the total water potential of an open aqueous solution is negative.
CORRECTED PATH
ACEpath Teacher's DemonstrationAt equilibrium,
02 The student omits the van 't Hoff factor (effectively setting i = 1 instead of 2.0 for NaCl), calculating Ψs,ext = -0.198 MPa and obtaining Ψp = 0.652 MPa.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You omitted the ionization factor from the van 't Hoff equation. Because sodium chloride () dissociates into two ions ( and ), must be included, yielding .
- Step 3Correct
Your reasoning that an open bath has and that water potential equilibrates across the cell membrane is completely sound, but this step inherits your earlier calculation error for .
- Step 4Correct
You correctly subtracted the internal solute potential to solve for turgor pressure, but because was evaluated as instead of , the final numerical result is incorrect.
WHAT YOU DID WELL
Compliments from Your TeacherYou converted the temperature from Celsius to Kelvin accurately.
You recognized that the open bath has zero pressure potential, setting .
You applied the osmotic equilibrium condition properly.
You correctly rearranged to isolate the pressure potential .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou used instead of , omitting for the dissociating salt.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisForgetting that ionic solutes dissociate in aqueous solution into multiple particles, which doubles the effective osmotic concentration compared to non-electrolytes like glucose or sucrose.
REASONING PATH
Your ACEpath teacher’s suggested approach- Solute Dissociation Check
For electrolyte solutions, the solute potential formula requires the van 't Hoff factor: .
Always check whether the solute is an electrolyte (such as , where ) or a non-electrolyte (such as sucrose, where ) before calculating .
CORRECTED PATH
ACEpath Teacher's DemonstrationRecalculate the external solute potential using the ionization constant: .
Set the cellular water potential equal to the external bath water potential at equilibrium: .
Solve for the turgor pressure: .
03 The student uses Celsius temperature directly instead of converting to Kelvin, resulting in Ψs,ext = -0.0332 MPa and an erroneous turgor pressure of 0.817 MPa.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
The universal gas constant is expressed in units of , which requires absolute temperature in Kelvin (). Using directly makes the calculated external solute potential about twelve times too small in magnitude.
- Step 2Correct
Your reasoning that an open bath has and that at equilibrium is conceptually correct, but the numerical value inherits the temperature error from Step 1.
- Step 3Correct
You correctly rearranged and handled the subtraction of a negative value, but propagating the incorrect external potential produced instead of .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recalled and applied the van 't Hoff equation .
You recognized that an open container has zero pressure potential, so .
You correctly stated that at osmotic equilibrium, .
You correctly isolated turgor pressure using and carefully handled the double negative.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou entered the given value directly for without converting to absolute temperature in Kelvin.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisWhenever thermodynamic constants contain Kelvin in their denominator (such as ), temperature must be expressed on the absolute Kelvin scale () to prevent dimensional inconsistency.
REASONING PATH
Your ACEpath teacher’s suggested approach- Unit Alignment for Temperature
In , temperature must be in Kelvin: .
Before calculating, check the unit of . If it contains , convert Celsius to Kelvin first.
- Order of Magnitude Sanity Check
At room temperature (~), a ideal monovalent salt solution () has .
If a tenth-molar solution yields a solute potential of only , verify whether you multiplied by instead of .
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert the bath temperature to Kelvin: .
Recalculate the solute potential of the bath: .
Equate external and internal total water potential at equilibrium: .
Solve for internal turgor pressure: .
Lock it in
What is the van 't Hoff equation for solute potential (), and what sign must its value always have for an aqueous solution?
. The value is always negative (or zero for pure water) because adding solutes decreases the free energy of water.
Similar question
A plant cell with a cytoplasmic solute potential of is placed in an open beaker containing a sucrose solution () at (). At full osmotic equilibrium, what is the cell's turgor pressure ()? Express your answer in to three significant figures.
Answer
. Key steps: ; ; open bath means ; at equilibrium ; .
A flaccid plant cell with and is immersed in an open bath containing () at (). (a) In which direction will water initially move? (b) Assuming negligible change in cell volume, what will be the turgor pressure once equilibrium is achieved?
Answer
(a) Net water movement is into the cell. (b) . Key steps: ; ; initial ; since , water flows into the cell; at equilibrium , so .
A turgid parenchyma cell with and is placed in an open bathing solution of () at (, ). If the cell undergoes incipient plasmolysis (where ) at equilibrium without changing its internal solute concentration, what must be the molar concentration of the external solution?
Answer
. Key steps: at incipient plasmolysis, , so ; at equilibrium ; for an open bath, ; .