Resources

Consider an extremely flattened eukaryotic squamous cell whose apical-to-basal thickness LL approaches a microscopic minimum of L=0.200 μmL = 0.200\,\mu\mathrm{m} across the alveolar-capillary barrier. According to Fick's first law of diffusion, the diffusive flux of oxygen gas is J=−DΔCLJ = -D \frac{\Delta C}{L}. If the effective diffusion coefficient of oxygen through the hydrated cellular barrier is D=2.40×10−5 cm2/sD = 2.40 \times 10^{-5}\text{ cm}^2/\text{s} and the concentration gradient across the membrane is ΔC=Cin−Cout=−1.50×10−7 mol/cm3\Delta C = C_{\text{in}} - C_{\text{out}} = -1.50 \times 10^{-7}\text{ mol}/\text{cm}^3, calculate the magnitude of the diffusive oxygen flux JJ in mol/(cm2⋅s)\text{mol}/(\text{cm}^2\cdot\text{s}) as L→0.200 μmL \to 0.200\,\mu\mathrm{m} (2.00×10−5 cm2.00 \times 10^{-5}\text{ cm}).

Answer and steps

Final answer

J=1.80×10−7 mol/(cm2⋅s)J = 1.80 \times 10^{-7}\text{ mol}/(\text{cm}^2\cdot\text{s}).

Steps

01

Structure-Function Relationship and Fick's First Law

In biological systems, gas exchange relies on passive diffusion. Type I alveolar cells are simple squamous epithelial cells that are extremely thin and flattened. This structural specialization minimizes the diffusion distance LL, thereby maximizing the rate of diffusion (flux JJ) of respiratory gases between the alveoli and pulmonary capillaries.

Fick's first law of diffusion quantitatively describes this relationship: J=−DΔCLJ = -D \frac{\Delta C}{L}

where:

  • JJ is the diffusive flux (the amount of substance passing through a unit area per unit time).
  • DD is the diffusion coefficient.
  • ΔC=Cin−Cout\Delta C = C_{\text{in}} - C_{\text{out}} is the concentration difference across the barrier.
  • LL is the diffusion distance or membrane thickness.

02

Unit Consistency

To calculate the flux in mol/(cm2⋅s)\text{mol}/(\text{cm}^2\cdot\text{s}), all spatial dimensions must be expressed in centimeters (cm\text{cm}):

  • D=2.40×10−5 cm2/sD = 2.40 \times 10^{-5}\text{ cm}^2/\text{s}
  • ΔC=−1.50×10−7 mol/cm3\Delta C = -1.50 \times 10^{-7}\text{ mol}/\text{cm}^3
  • L=0.200 μm=0.200×10−4 cm=2.00×10−5 cmL = 0.200\text{ }\mu\text{m} = 0.200 \times 10^{-4}\text{ cm} = 2.00 \times 10^{-5}\text{ cm}

Common Pitfall: Always verify that distance units match the diffusion coefficient. Forgetting to convert micrometers (μm\mu\text{m}) to centimeters (cm\text{cm}) leads to an answer off by a factor of 10410^4.


03

Calculating the Diffusive Flux

Substitute the given values into Fick's law: J=−(2.40×10−5 cm2/s)⋅−1.50×10−7 mol/cm32.00×10−5 cmJ = -\left(2.40 \times 10^{-5}\text{ cm}^2/\text{s}\right) \cdot \frac{-1.50 \times 10^{-7}\text{ mol}/\text{cm}^3}{2.00 \times 10^{-5}\text{ cm}}

Notice that the negative sign in Fick's law cancels the negative concentration difference, reflecting that diffusion occurs spontaneously down the concentration gradient (from higher concentration outside to lower concentration inside): J=2.40×10−5⋅1.50×10−72.00×10−5 mol/(cm2⋅s)J = \frac{2.40 \times 10^{-5} \cdot 1.50 \times 10^{-7}}{2.00 \times 10^{-5}}\text{ mol}/(\text{cm}^2\cdot\text{s})

Canceling the common factor of 10−510^{-5}: J=2.402.00⋅1.50×10−7 mol/(cm2⋅s)J = \frac{2.40}{2.00} \cdot 1.50 \times 10^{-7}\text{ mol}/(\text{cm}^2\cdot\text{s}) J=1.20⋅1.50×10−7 mol/(cm2⋅s)=1.80×10−7 mol/(cm2⋅s)J = 1.20 \cdot 1.50 \times 10^{-7}\text{ mol}/(\text{cm}^2\cdot\text{s}) = 1.80 \times 10^{-7}\text{ mol}/(\text{cm}^2\cdot\text{s})

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert the membrane thickness from micrometers to centimeters, resulting in an inconsistent unit and a flux value that is four orders of magnitude too small.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    J=−D∗ΔCLJ = -D * \frac{\Delta C}{L}

  2. Step 2

    J=−(2.40×10−5)∗(−1.50×10−70.200)J = -(2.40 \times 10^{-5}) * \left(\frac{-1.50 \times 10^{-7}}{0.200}\right)

    Correct

    J=−(2.40×10−5 cm2/s)⋅−1.50×10−7 mol/cm32.00×10−5 cmJ = -(2.40 \times 10^{-5}\text{ cm}^2/\text{s}) \cdot \frac{-1.50 \times 10^{-7}\text{ mol}/\text{cm}^3}{2.00 \times 10^{-5}\text{ cm}}

    You substituted L=0.200L = 0.200 directly without converting micrometers to centimeters. Because DD is in cm2/s\text{cm}^2/\text{s} and ΔC\Delta C is in mol/cm3\text{mol}/\text{cm}^3, the thickness must be converted: 0.200 \mum=2.00×10−5 cm0.200\text{ \mu m} = 2.00 \times 10^{-5}\text{ cm}.

  3. Step 3

    J=1.80×10−11 mol/(cm2⋅s)J = 1.80 \times 10^{-11}\text{ mol}/(\text{cm}^2\cdot\text{s})

    Correct

    J=1.80×10−7 mol/(cm2⋅s)J = 1.80 \times 10^{-7}\text{ mol}/(\text{cm}^2\cdot\text{s})

    Your arithmetic was accurate based on your substituted numbers, but the missing factor of 10−410^{-4} in the denominator made your final flux four orders of magnitude too small.

WHAT YOU DID WELL
Compliments from Your Teacher

You selected the correct physical law for diffusive flux across a biological membrane.

You correctly managed the negative signs between the formula and the concentration difference.

You performed the algebraic evaluation accurately based on the numbers you wrote down.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion Error

You substituted the numerical value of 0.2000.200 without appending or checking its unit against the other dimensional quantities.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked dimensional homogeneity before substituting into Fick's law, failing to convert micrometers (\mum\text{\mu m}) to centimeters (cm\text{cm}) when matching a diffusion coefficient given in cm2/s\text{cm}^2/\text{s}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimension Matching
  • Every spatial quantity (DD, ΔC\Delta C, LL) in Fick's law must share the same base length unit (all in cm\text{cm} or all in m\text{m}).

  • List all given quantities with full units beside your formula before plugging in any numerical values.

Metric Prefix Conversion
  • 1 \mum=10−6 m=10−4 cm1\text{ \mu m} = 10^{-6}\text{ m} = 10^{-4}\text{ cm}.

  • Multiply a micrometer value by 10−410^{-4} whenever working in the CGS (centimeter-gram-second) system.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the alveolar barrier thickness to centimeters: L=0.200 \mum=0.200×10−4 cm=2.00×10−5 cmL = 0.200\text{ \mu m} = 0.200 \times 10^{-4}\text{ cm} = 2.00 \times 10^{-5}\text{ cm}.

  2. Substitute the consistent values into Fick's law: J=−(2.40×10−5 cm2/s)⋅−1.50×10−7 mol/cm32.00×10−5 cmJ = -\left(2.40 \times 10^{-5}\text{ cm}^2/\text{s}\right) \cdot \frac{-1.50 \times 10^{-7}\text{ mol}/\text{cm}^3}{2.00 \times 10^{-5}\text{ cm}}.

  3. Cancel matching factors of 10−510^{-5}: J=2.402.00⋅1.50×10−7 mol/(cm2⋅s)=1.20⋅1.50×10−7=1.80×10−7 mol/(cm2⋅s)J = \frac{2.40}{2.00} \cdot 1.50 \times 10^{-7}\text{ mol}/(\text{cm}^2\cdot\text{s}) = 1.20 \cdot 1.50 \times 10^{-7} = 1.80 \times 10^{-7}\text{ mol}/(\text{cm}^2\cdot\text{s}).

Final answer

J=1.80×10−7 mol/(cm2⋅s)J = 1.80 \times 10^{-7}\text{ mol}/(\text{cm}^2\cdot\text{s})

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out complete units with each substituted term to verify that unwanted length units cancel algebraically.

  • Practice converting common biological dimensions (nm\text{nm}, \mum\text{\mu m}) into centimeters and meters.

OverviewACEpath Teacher's Diagnosis

02 The student misinterprets Fick's law as a product rather than a ratio of concentration difference to distance, multiplying by L instead of dividing by L.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    J=−D∗ΔC∗LJ = -D * \Delta C * L

    Correct

    J=−DΔCLJ = -D \frac{\Delta C}{L}

    Fick's first law defines diffusive flux as inversely proportional to the diffusion distance LL, because a thinner barrier steepens the concentration gradient ΔCL\frac{\Delta C}{L}. Multiplying by LL reverses this physical relationship.

  2. Step 2

    J=−(2.40×10−5)∗(−1.50×10−7)∗(2.00×10−5)⟹J=7.20×10−17 mol/(cm2⋅s)J = -(2.40 \times 10^{-5}) * (-1.50 \times 10^{-7}) * (2.00 \times 10^{-5}) \Longrightarrow J = 7.20 \times 10^{-17}\text{ mol}/(\text{cm}^2\cdot\text{s})

    Correct

    J=−(2.40×10−5 cm2/s)⋅−1.50×10−7 mol/cm32.00×10−5 cm=1.80×10−7 mol/(cm2⋅s)J = -(2.40 \times 10^{-5}\text{ cm}^2/\text{s}) \cdot \frac{-1.50 \times 10^{-7}\text{ mol}/\text{cm}^3}{2.00 \times 10^{-5}\text{ cm}} = 1.80 \times 10^{-7}\text{ mol}/(\text{cm}^2\cdot\text{s})

    Your arithmetic and unit conversion were executed accurately according to your formula, but this calculation was affected by multiplying by LL instead of dividing by LL.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly matched each given physical variable to its value, including the negative concentration difference.

You converted the membrane thickness from micrometers to centimeters accurately (0.200 \mum=2.00×10−5 cm0.200\text{ \mu m} = 2.00 \times 10^{-5}\text{ cm}).

You handled the product of negative signs correctly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverse-proportion formula inversion

You multiplied by the membrane thickness LL instead of dividing by it in the diffusion gradient term.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating a gradient (difference divided by distance, ΔCL\frac{\Delta C}{L}) with a linear product of parameters. Biologically, cells flatten to minimize diffusion distance and maximize flux, which requires LL to be in the denominator.

REASONING PATH
Your ACEpath teacher’s suggested approach
Gradient Definition
  • A spatial gradient represents a change per unit distance: gradient=ΔCL\text{gradient} = \frac{\Delta C}{L}.

  • Always place the barrier thickness or diffusion distance in the denominator when calculating a concentration gradient.

Biological Sanity Check
  • As cell thickness L→0L \to 0, diffusive flux JJ must increase, not decrease toward zero.

  • Check that dividing by a tiny thickness produces a larger rate of exchange, matching the structural adaptation of squamous alveolar cells.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write Fick's first law with distance in the denominator: J=−DΔCLJ = -D\frac{\Delta C}{L}.

  2. Substitute the values in consistent centimeter units: J=−(2.40×10−5)⋅−1.50×10−72.00×10−5J = -(2.40 \times 10^{-5}) \cdot \frac{-1.50 \times 10^{-7}}{2.00 \times 10^{-5}}.

  3. Cancel 10−510^{-5} from the numerator and denominator: J=2.402.00×1.50×10−7=1.20×1.50×10−7J = \frac{2.40}{2.00} \times 1.50 \times 10^{-7} = 1.20 \times 1.50 \times 10^{-7}.

Final answer

J=1.80×10−7 mol/(cm2⋅s)J = 1.80 \times 10^{-7}\text{ mol}/(\text{cm}^2\cdot\text{s})

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the dimensional analysis of diffusive flux to see how cm2/s×(mol/cm3)/cm=mol/(cm2⋅s)\text{cm}^2/\text{s} \times (\text{mol}/\text{cm}^3) / \text{cm} = \text{mol}/(\text{cm}^2\cdot\text{s}).

  • Practice setting up rate equations where distance acts as a barrier in the denominator.

OverviewACEpath Teacher's Diagnosis

03 The student makes an arithmetic error when evaluating the powers of ten during division, subtracting exponents incorrectly and obtaining an exponent of -6 instead of -7.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    J=−(2.40×10−5)∗(−1.50×10−72.00×10−5)J = -(2.40 \times 10^{-5}) * \left(\frac{-1.50 \times 10^{-7}}{2.00 \times 10^{-5}}\right)

  2. Step 2

    ΔCL=−0.75×10−2=−7.50×10−3 mol/cm4\frac{\Delta C}{L} = -0.75 \times 10^{-2} = -7.50 \times 10^{-3}\text{ mol/cm}^4

  3. Step 3

    J=(2.40×10−5)∗(7.50×10−3)  ⟹  J=1.80×10−6 mol/(cm2⋅s)J = (2.40 \times 10^{-5}) * (7.50 \times 10^{-3}) \implies J = 1.80 \times 10^{-6}\text{ mol/(cm}^2\cdot\text{s)}

    Correct

    J=(2.40×10−5)⋅(7.50×10−3)=18.0×10−8=1.80×10−7 mol/(cm2⋅s)J = (2.40 \times 10^{-5}) \cdot (7.50 \times 10^{-3}) = 18.0 \times 10^{-8} = 1.80 \times 10^{-7}\text{ mol}/(\text{cm}^2\cdot\text{s})

    Multiplying the coefficients gives 2.40×7.50=18.02.40 \times 7.50 = 18.0, and adding the exponents gives 10−5×10−3=10−810^{-5} \times 10^{-3} = 10^{-8}. Normalizing 18.0×10−818.0 \times 10^{-8} requires shifting the decimal one place to the left, which adds 11 to the exponent: −8+1=−7-8 + 1 = -7, yielding 1.80×10−7 mol/(cm2⋅s)1.80 \times 10^{-7}\text{ mol}/(\text{cm}^2\cdot\text{s}) rather than 1.80×10−6 mol/(cm2⋅s)1.80 \times 10^{-6}\text{ mol}/(\text{cm}^2\cdot\text{s}).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled and applied Fick's first law of diffusion (J=−DΔCLJ = -D \frac{\Delta C}{L}).

You maintained consistent units across the diffusion coefficient, concentration, and barrier thickness.

You correctly resolved the double negative to recognize that net diffusive flux is directed down the concentration gradient.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Arithmetic / Scientific Notation Normalization Error

You correctly calculated the intermediate product 2.40×7.50=18.02.40 \times 7.50 = 18.0, but made an error when adjusting the exponent of 10−810^{-8} into normalized scientific notation.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When converting an unnormalized product like 18.0×10−818.0 \times 10^{-8} into standard scientific notation (1.80×10n1.80 \times 10^n), decreasing the mantissa by a factor of 1010 requires increasing the exponent by +1+1 (−8+1=−7-8 + 1 = -7). An adjustment of +2+2 was mistakenly applied instead, leading to an exponent of −6-6.

REASONING PATH
Your ACEpath teacher’s suggested approach
Exponent Product Rule
  • 10a×10b=10a+b10^a \times 10^b = 10^{a+b}

  • Add the powers of ten first before adjusting the decimal: 10−5×10−3=10−5+(−3)=10−810^{-5} \times 10^{-3} = 10^{-5 + (-3)} = 10^{-8}.

Scientific Notation Normalization Rule
  • If the mantissa is divided by 10k10^k, the exponent must increase by +k+k: M×10p=(M/10k)×10p+kM \times 10^p = (M / 10^k) \times 10^{p+k}.

  • Convert 18.0×10−818.0 \times 10^{-8} by writing 18.0=1.80×10118.0 = 1.80 \times 10^1, then combine powers: 1.80×101+(−8)=1.80×10−71.80 \times 10^{1 + (-8)} = 1.80 \times 10^{-7}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute the gradient into Fick's law: J=−(2.40×10−5 cm2/s)⋅(−7.50×10−3 mol/cm4)J = -(2.40 \times 10^{-5}\text{ cm}^2/\text{s}) \cdot (-7.50 \times 10^{-3}\text{ mol}/\text{cm}^4).

  2. Multiply coefficients and powers of ten separately: (2.40×7.50)×(10−5×10−3)=18.0×10−8(2.40 \times 7.50) \times (10^{-5} \times 10^{-3}) = 18.0 \times 10^{-8}.

  3. Normalize to standard scientific notation: 18.0×10−8=(1.80×101)×10−8=1.80×10−7 mol/(cm2⋅s)18.0 \times 10^{-8} = (1.80 \times 10^1) \times 10^{-8} = 1.80 \times 10^{-7}\text{ mol}/(\text{cm}^2\cdot\text{s}).

Final answer

J=1.80×10−7 mol/(cm2⋅s)J = 1.80 \times 10^{-7}\text{ mol}/(\text{cm}^2\cdot\text{s})

NEXT STEPS
Final Takeaways from Your Teacher
  • Write intermediate unnormalized products explicitly (e.g., 18.0×10−818.0 \times 10^{-8}) before adjusting to standard form.

  • Check that whenever you move a decimal point one place to the left, the exponent increases by exactly 11.

  • Consider canceling common powers of ten between the numerator and denominator before multiplying, such as canceling 10−510^{-5} in DD with 10−510^{-5} in LL.

Lock it in

Similar question

01

A planar lipid bilayer has a thickness of 4.0 nm4.0\text{ nm}. If oxygen diffuses across it with a diffusion coefficient of D=1.0×10−6 cm2/sD = 1.0 \times 10^{-6}\text{ cm}^2/\text{s} and a concentration difference of ΔC=−2.0×10−8 mol/cm3\Delta C = -2.0 \times 10^{-8}\text{ mol}/\text{cm}^3, find the diffusive flux JJ in mol/(cm2⋅s)\text{mol}/(\text{cm}^2\cdot\text{s}).

Answer

J=5.0×10−8 mol/(cm2⋅s)J = 5.0 \times 10^{-8}\text{ mol}/(\text{cm}^2\cdot\text{s}). First convert L=4.0 nm=4.0×10−7 cmL = 4.0\text{ nm} = 4.0 \times 10^{-7}\text{ cm}. Then substitute: J=−(1.0×10−6)⋅−2.0×10−84.0×10−7=0.50×10−7=5.0×10−8 mol/(cm2⋅s)J = -\left(1.0 \times 10^{-6}\right) \cdot \frac{-2.0 \times 10^{-8}}{4.0 \times 10^{-7}} = 0.50 \times 10^{-7} = 5.0 \times 10^{-8}\text{ mol}/(\text{cm}^2\cdot\text{s}).

02

Pulmonary edema increases the fluid diffusion distance across an alveolar barrier from 0.20 \mum0.20\text{ \mu m} to 1.00 \mum1.00\text{ \mu m}. Assuming D=2.40×10−5 cm2/sD = 2.40 \times 10^{-5}\text{ cm}^2/\text{s} and the partial pressure gradient maintains ΔC=−1.50×10−7 mol/cm3\Delta C = -1.50 \times 10^{-7}\text{ mol}/\text{cm}^3, calculate the new flux and the percentage reduction in oxygen transport.

Answer

Jedema=3.60×10−8 mol/(cm2⋅s)J_{\text{edema}} = 3.60 \times 10^{-8}\text{ mol}/(\text{cm}^2\cdot\text{s}), representing an 80%80\% reduction. Convert L=1.00 \mum=1.00×10−4 cmL = 1.00\text{ \mu m} = 1.00 \times 10^{-4}\text{ cm}. New flux J=−(2.40×10−5)⋅−1.50×10−71.00×10−4=3.60×10−8 mol/(cm2⋅s)J = -(2.40 \times 10^{-5}) \cdot \frac{-1.50 \times 10^{-7}}{1.00 \times 10^{-4}} = 3.60 \times 10^{-8}\text{ mol}/(\text{cm}^2\cdot\text{s}). Since LL increased 55-fold, flux drops to 15\frac{1}{5} (20%20\%) of the original 1.80×10−7 mol/(cm2⋅s)1.80 \times 10^{-7}\text{ mol}/(\text{cm}^2\cdot\text{s}), an 80%80\% decrease.

03

A respiratory membrane of area A=0.50 m2A = 0.50\text{ m}^2 has a thickness of 0.25 \mum0.25\text{ \mu m}. Oxygen diffuses with D=2.0×10−5 cm2/sD = 2.0 \times 10^{-5}\text{ cm}^2/\text{s} across a concentration difference of ΔC=−1.25×10−7 mol/cm3\Delta C = -1.25 \times 10^{-7}\text{ mol}/\text{cm}^3. Calculate the total molar rate of oxygen transfer n˙=J⋅A\dot{n} = J \cdot A in mol/s\text{mol}/\text{s}.

Answer

n˙=5.0×10−4 mol/s\dot{n} = 5.0 \times 10^{-4}\text{ mol}/\text{s}. Convert thickness: L=0.25 \mum=2.5×10−5 cmL = 0.25\text{ \mu m} = 2.5 \times 10^{-5}\text{ cm}. Compute flux: J=−(2.0×10−5 cm2/s)⋅−1.25×10−7 mol/cm32.5×10−5 cm=1.0×10−7 mol/(cm2⋅s)J = -(2.0 \times 10^{-5}\text{ cm}^2/\text{s}) \cdot \frac{-1.25 \times 10^{-7}\text{ mol}/\text{cm}^3}{2.5 \times 10^{-5}\text{ cm}} = 1.0 \times 10^{-7}\text{ mol}/(\text{cm}^2\cdot\text{s}). Convert area to cm2\text{cm}^2: A=0.50 m2=0.50×104 cm2=5000 cm2A = 0.50\text{ m}^2 = 0.50 \times 10^4\text{ cm}^2 = 5000\text{ cm}^2. Multiply: n˙=(1.0×10−7 mol/(cm2⋅s))×(5000 cm2)=5.0×10−4 mol/s\dot{n} = (1.0 \times 10^{-7}\text{ mol}/(\text{cm}^2\cdot\text{s})) \times (5000\text{ cm}^2) = 5.0 \times 10^{-4}\text{ mol}/\text{s}.

Loading workspace…